Had to go to the WPA to get connection Nook. Now the laptop will not connect.

Newly acquired Nook Color would not recognize connection WEP. So I spent the Bureau for the WPA. Now laptop said little or no connectivity. Can the corners as well and portable live in this environment? If so, how?

Advertisement

It's a good thing.  WEP is near useless for what is security is these days.

Connect to a router, or using ad hoc wireless to share the Internet connection belonging to the office?

Most wireless routers require that all devices use the same encryption level.  Some newer routers can allow a mixture of WPA and WPA2, but as far as I know, none allow the WEP and WPA at the same time.  If you use a wireless adapter in the Office for an ad hoc wireless network, I'm sure that without these adapters allow the WEP and WPA.

Change your laptop in WPA too.

You may need to remove the connection recorded first in order to make this change. Assuming you use Windows to configure the adapter to the laptop wireless (and more far assuming that the laptop is running XP sp2 or greater), the procedure is as follows:

  • Open network connections (start > run > ncpa.cpl > OK)
  • Right click on the wireless adapter icon and select Properties
  • Click the "Wireless Networks" tab
  • Select your network wireless from the list of "Preferred networks", then click on the button Delete
  • OK your way out

Now find your wireless network in the list of available wireless networks, click connection and enter the WPA password when you are prompted.

Tags: Windows

Similar Questions

  • HP ENVY 17-j020us Quad Edition: installed SSD and Windows 7, now the laptop will not boot

    I replaced my hard drive Windows 8.1 with a PNY 240 GB SSD and Windows 7 64-bit.  Everything worked very well! Installed all the drivers, everything has worked very well!  Restarted several times, everything worked fine!  Portable stop for the night, the next morning I turn on the laptop and get this error message:

    "not found boot device, please, install an operating system on your hard disk, hard disk 3F0".

    I've traveled different repair procedures using the ERD Windows 7 without change.  I have reinstalled Windows 7 with SSD formatted as GPT drive, received the same error message:

    "not found boot device, please, install an operating system on your hard disk, hard disk 3F0".

    I have reinstalled Windows 7 SSD formatted as MBR disk withs, received the same error message:

    "not found boot device, please, install an operating system on your hard disk, hard disk 3F0".

    I removed the SSD to the laptop and placed in a desktop pc, pc works fine, no problem with the SSD.  SSD in laptop, got the same error message: "boot device not found, please install an operating system on your hard disk, hard disk 3F0".   I don't know where to go from here.

    Help please...

    Okay, I'm running.  In the System Configuration UEFI clicked 'Load HP Factory Default keys', this restored "Secure Boot" who has restored the laptop as long as you work!  Thanks for the help.

  • I have an old laptop Armada M700! I've implemented a power on password and it does not work! Is there a way to reset the password? Even the laptop will not power

    laptop worked very well slow, but very well so I tried a bit of security, so I put the power on password good this morning when I try to activate the password does not work!

    Hello

    I suggest you to contact the manufacturer of the computer for help on this issue.

  • Windows stops but the laptop will not turn off or to sleep.

    Hello

    I have Hp Pavilion dv6-6120us and recently I noticed that windows 7 is off but my computer stays, the hard drive fan and lighting too, if I put my computer to sleep it won't wake up I have to hold the power button / 10 seconds, and then restart the computer. I uninstalled all the programs that are not needed and also uninstalled my virus protection, I have run the disk cleaner, fix the registry and ran a virus check and malware and no problem, I also ran a check air that comes with my Hp system and found no problem. I already turned off all controllers usb, video card, sound card, network card and still no luck, also on the safe mode, the custom of the computer turns off. I also ran msconfig and disabled all the startup programs, services, and still no luck. I uninstalled all updates of windows too and still have the same problem, any help, I'll take thank you.

    Hi Yemel,

    This question could be either software or hardware partners. Start safe mode and check if you can close properly.

    Method 1:

    Step 1:

    Safe mode is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started. Mode safe mode appears in the corners of your monitor to identify which Windows mode you are using.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2:

    If the problem does not persist in Mode safe then the problem may be due to a third-party program/application. To determine which program or application is causing the problem, try to place the computer in a clean boot state, and check.

    Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

    http://support.Microsoft.com/kb/929135

    Note: Follow the section 'More information' to reset the computer to start as usual after a clean boot troubleshooting.

    Please refer to:

    Solve problems with sleep and the night before extended Modes (Windows 7)

    The problems of wake the computer from sleep mode

    Note: changing the BIOS settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS settings can be solved. Changes to settings are at your own risk.

    Please post with the State of the question so that we can help you.

  • Activation key on the back of the laptop will not activate Microsoft Word, Power Point etc.

    The activation key on the back of my laptop, which is supposed to activate Microsoft Word, PowerPoint and so on, will not work. What should I do to make it work?

    Tuesday, September 25, 2012 23:46:24 + 0000, Anthony0629 wrote:

    The activation key on the back of my laptop, which is supposed to activate Microsoft Word, PowerPoint and so on, will not work. What should I do to make it work?

    It is not supposed to activate Microsoft Word, PowerPoint and so on.
    This is the product key for Windows, and it won't, because it's
    the wrong key for Microsoft Office.

    Ken Blake, Microsoft MVP

  • Password: can not get in line and my laptop will not accept my password

    yesterday morning I went online with no problems, but when I tried later in the day that my phone does not accept that my password so could not get online - tried again this morning without modification.

    Thank you Mick for your repl to my problem, the problem is I can't on line at all. I use now the phone my wife to try to get help.

    Eddie

    It has nothing to do with getting online with your computer.

    Use portable your wife to read, what you arereading here.

    Everything I told you to do it was to read what was at this link to try a ssolve your problem:

    If you can't do it, comsider reinstall Vista.

    If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

    You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

    • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
    • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
    • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
    • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

    To use system restore to log on Windows 7 or Windows Vista when you lose access to an account, follow these steps.

    Note To do this, there must be a restore point from the system in which the connection was successful.

    1. Insert the Windows Vista or Windows 7 DVD, and restart the computer.
    2. When you receive the following message appears, press a key:
      Press any key to start from the CD or DVD.
    3. Set the following preferences and then click Next:
      • To install language
      • Time and currency formats
      • Keyboard or input method
    4. Click repair your computerand select the operating system you want to repair, and then clickNext.
    5. Click System Restore, and then click Next.
    6. Click on the food that you want to use, and then click Next.

      Note Click a restore point that will return the computer to a State where the connection is successful. After you use the system restore feature, reinstall all programs or updates that can be removed. You won't lose any personal documents. However, you may have to reinstall programs. You may also need to reset some personal settings.

    7. Confirm the disks that you want to restore, and then click Next.
    8. Click Finish, and then click Yes when you are prompted.
    9. When the system restore process is complete, click restart to restart the computer.
    10. Once the computer restarts, click close to confirm that the system restore process has finished successfully.
    11. Use an appropriate method to open a session. For example, log in using an older password, or log in using another computer account.

    After you connect, you must follow additional steps, depending on the scenario you encounter.

    Additional steps for scenario 1

    1. After you log on, change the password for the protected administrator account.
    2. After you change the password, restart the computer. Make sure that you can connect by using the new password.

    Additional steps for scenario 2

    1. After you log on, make sure that each user account can log in using the appropriate credentials.
    2. Change the password for the user account that cannot log on.

    Additional steps for scenario 3

    1. After you log on, use the element user accounts in Control Panel to create a new protected administrator account.
    2. Log in using the new protected administrator account. Then delete the older protected administrator account which has been restored.

      Note For security reasons, do not use the restored protected administrator account.

    Additional steps for scenario 4

    1. After you log on, use the element user accounts in Control Panel to create a new protected administrator account.
    2. Log in using the new protected administrator account.
    3. Change the old administrator account protected with a standard user account.

    Mick Murphy - Microsoft partner

  • When I use Hotmail and try to attach a document to send by email, I get a message error that says 'attachment Id has wrong format", and if the message will not be sent.

    The attachment ID has wrong format.

    When I use Hotmail and try to attach a document to send by email, I get a message error that says 'attachment Id has wrong format", and if the message will not be sent.

    I have had absolutely no problem in electronic documents before sending.

    Please help, thanks.

    Hello KerJJ,

    The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

    Windows Live Mail

    Windows Live Hotmail

    Windows Live Messenger

    Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

  • iPhone 6 s more. The music will not play an entire album. Just of repetitions the first track.  How can I get it to play all tracks in order?

    iPhone 6 s more. The music will not play an entire album. Just of repetitions the first track.  How can I get it to play all tracks in order?

    In-app music, press the "mini player" (the narrow ribbon at the bottom showing the song that is playing).  Which opens upward from the view of work full screen of the song being played - down at the bottom of this screen are icons for shuffle and repeat, press Repeat until the gray background disappears.

  • Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

    Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

    Kev2012 wrote:

    Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

    It would depend on what you're trying to link to?

    Here are the supported Bluetooth profiles an Apple device can connect to iOS: Bluetooth profiles supported - Apple Support

  • I'm trying to upgrade to service pack 3 for xp and I get an error message and it will not complete the installation. What should I do?

    I'm trying to upgrade to service pack 3 for xp and I get an error message and it will not complete the installation.  What should I do?

    Hi BartlettNYC,

    Please see the links below, to solve the problems with Window XP SP3.

    Steps to take before you install Windows XP SP3.

    http://support.Microsoft.com/kb/950717

    How to troubleshoot a windows XP SP3 Installation failure.

    http://support.Microsoft.com/kb/950718

    Good luck.

  • I get the message, "DLL could not be opened", and now my DVD will not play on my HP laptop

    I get the message, "DLL could not be opened", and now my DVD will not play on my HP laptop

    I get the message, "DLL could not be opened", and now my DVD will not play on my HP laptop

    =================================
    If it is a recent issue, of what it may be worth trying
    do a restore of the system at a time before everything started.

    See the following article:

    (306084) how to restore Windows XP to a
    previous state
    http://support.Microsoft.com/?kbid=306084

  • If you use Hotmail, I try to send an e-mail, I get a message error that says 'attachment Id has wrong format", and if the message will not be sent.

    "Attachment Id has wrong format", we hear wat!

    If you use Hotmail, I try to send an e-mail, I get a message error that says 'attachment Id has wrong format", and if the message will not be sent.  I use the Google Chrome or internet explore and cannot send new or respond to emails without getting the same message... help plsssssemai

    View all Windows Live and Hotmail questions in the appropriate forum found here:
    http://windowslivehelp.com/

  • Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

    Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

    Hi ipitedafoo,

    You can check if this article helps.

    Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

    See also:

    Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

  • After that I imported my photos and videos, the videos will not play. I click on them and I get a black picture with in a valid Image. I can't find a solution. Help

    I use a sony camera.  After the up-loading photos and videos to the computer that the videos will not open and the game.  I always get a sign of invalid picture

    What is the format of the video clips?

    You may need a compatible media player.

    The following media players freeware can be worth a try:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    VLC Media Player
    http://www.filehippo.com/download_vlc/
    (works on XP/Vista/7)
    (the name of the file to download is: vlc - 2.0.1 - win32.exe)

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Media Player Classic Home Cinema
    http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
    (works on XP/Vista/7)
    (The name of the file to download is: "MPC-HomeCinema 1.6.1.4235.exe")

  • Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to so

    Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to someone in tech support that I did not understand, and I don't know what to do next. The tech gal was run, but once she hung up he returned to broken.  I have an idea, but that's just a guess - trouble started about the time I tried to open On1 of ps there has been a perfect icon effects 9 (for some reason, they decided to add the icon when I got it - I have 8) I clicked it and it loaded the update and then asked me if I wanted to try or buy - that's when I realized that I should have clicked on 8 and tried of back , but is either too late - I think, maybe this dll. 8 or 9 in with perfect On1 effects - and it has changed my settings in PS - and is the reason why it is not compatible - ideas? I have a pc with window7-Carol

    Try to run Photoshop without loading third-party plug-in. hold SHIFT keys when you start Photoshop.  The missing module is not Adobe software.

Maybe you are looking for