Half-bridge scalable processor? HP dv7-4070us

Similar Questions

• dv7-4070us freezes twice a day... now

  Hello

  About two weeks ago, I purchased a dv7-4070us from Sears.com. It worked well through the initial start upward. The second day, PC started freezing randomly and without apparent reason. I have download all updates available from Microsoft and HP updates and still had the problem. Then, I went on this forum and read some posts and discovered the diagnostic programs. I ran these and I don't get any errors. I have since received more updates from Microsoft and HP. I also installed Norton Utilities 14 and cleaned all the registry errors, he found. Now, the PC freezes twice a day almost like clockwork. When I turn on the PC first for the day it freezes to the logo Windows first, then I have to hold the power button to turn off. After that I turned back and I am able to connect and access the desktop, but ten minutes later, it will freeze again. I have to hold the power button to turn off again. It's weird, but I guess the third time is the charm, the tracks PC perfectly after start of the third. I can restart or fine stop after the start of the third with no. freezes. I have left on during 2 days now on sleep and wake up and does not freeze. Any suggestions to solve this problem would be greatly appreciated.

  PS. -L' use of firewall and antivirus McAfee Total Protection

  UPDATE:

  Well it took three times, but it looks to replace the motherboard, processor and RAM took care of the problem. Overall I am satisfied with the HP support in this case. I am dissatisfied with the HP forum, because I never received a response to these posts during this whole ordeal. If your product is under warranty, I would recommend you to send it to them. I'm marking this resolved with this post.

• Pavilion dv7-4070us Fail short DST (failure ID PKVV5g - 5525T 4 - XD003G - 60QN03)

  Hello

  Last year, I bought the laptop from HP Pavilion dv7-4070us, running windows 7 64 bit. Everything was fine and dandy until recently. These days I only watched youtube videos and TV shows, when one day I turn on my computer to find that it remains on the splash screen of Windows 7 for an abnormal amount of time. This happened to me once before, but for some strange reason, (FYI: I'm tech savvy, so this question was a little weird) it was set the last time. However, unlike last time, the issue has not been resolved, the loading times still takes like 5 min or more. More when I run the diagnostic system test, the hard drive failed the short DST with the id of the fault: PKVV5g - 5525T 4 - XD003G - 60QN03.

  In addition, I ran the (samsung "collaborates" with seagate) drive hard seagate diagnostic with the same result, short failure of DST, but generic long and short generic and chip is checked and passed. So I was wondering if anyone had this similar problem and how did you resolve the situation. Again, the only thing I've done recently is only go on internet to see youtube and television series/films, only changes would be updated to windows. Another think I really have not tinkered around with the system.

  Searching high and low, it seems that I might have to replace the hard drive. However, I hope to not have to do it because the warranty just expired a few months ago. If someone could please answer or help I would appreciate it a lot! Happy holidays.

  PS. If you need more information, just ask. Thanks again!

  Failure of the DST is always in my experiences of time to replace the hard drive. Better, download your backed up files soon because sometimes the failure comes quickly after this notice.

• Can I upgrade the processor in DV7 - 3067CL.

  Can I upgrade the processor in DV7 - 3067CL a 2.40 GHz AMD Turion II Ultra Dual-Core Mobile Processor M600 to a 2.7 GHz AMD Turion II Ultra Dual-Core Mobile Processor M660?  And that supplys them. I looked on Newegg and Tigerdirect. Please help me. I would like a laptop fast for games with spending them much money on upgrades.

  You mess with the best die like the rest. Honest to my grave my soul lives for the Lord, and my sword finds its place in the evil that I send to hell. IM part of the clan army Stoon.

  The M640 @2.6 ghz is officially supported the fastest processor. Here is the Manual:

  Manual

  M640 on ebay

  The processor is about $ 100 on eBay. However, I wouldn't do this upgrade if your goal is to improve the power of the laptop game. You would not notice a significant improvement. .2 ghz is an increase of 9% which is not significant at the risk of tearing the machine. Also, the power of game is not so much based on a lot more information about the processor, the graphics card and who can not be upgraded. Laptops can usually be modded in game machines when they come that way from the factory.

• Processor upgrade DV7 - 2277CL

  Hello, do anyone know where I can find the "Maintenance and Service Guide" for my HP DV7 - 2277CL? I was looking on the support page, but I can't. I need to check if I can upgrade the processor, quickly with an Intel Core 2 Quad Q9100.

  Thanks in advance!

  Hello

  Here it is:

  h10032.www1.HP.com/CTG/manual/c01689926.PDF

  Good luck.

• Bridge Image Processor ' open image first to apply settings "does not

  I'll start by saying that I used the processor to Image CS6 Bridge (via photoshop) a lot in recent years, mainly for editing and processing of images to use in the timelapse video. I need the first image appears in the RAW Editor so I can apply the settings I want for the whole timelapse.

  In CC bridge however, it does not.

  I'm going to: Tools > Photoshop > image processor. Bridge then open photoshop and gives me this window (I understand that you can not make a timelapse with only 5 images):

  

  I have the box "open the first image to apply settings" checked and when I click on run it just start convert raw to JPEG images and does not give me the RAW Editor to apply my settings.

  CC Bridge and Photoshop CC are up-to-date.

  Did anyone see anything wrong with what I'm doing?

  Hi alexm,

  I suggest you to create an Action in Photoshop and save your collage that you perform on an image using the Raw utility and you can perform this action under preferences in Image Processor Utility.

  Create the Action see: Record actions | Tutorials Photoshop Adobe CC

  On the other batch is an another way out

  Reference: Photoshop help | Process a batch of files

  Let us know if it helps.

  Kind regards

  ~ Mohit

• Bridge Image Processor always creates JPEG or TIFF file, how to change this behavior?

  I searched the web, Bridge and Photoshop forums forums and come empty-handed. (The strange thing is, I know, there used to be a station who answered this question a few years ago). In any case, I use the Image Processor a little, and it works fine except for the annoying behavior of always creating a new folder to store the newly created images.

  I remember the solution is to change a line in a file (XML?) of "JPEG" to «» For the life of me, I can't find which file it is! I think that it used to located down inside the Application Support. I think that.

  Thanks for the help on this, it drives me crazy!

  Jeff

  Thanks for the reply! I am running CS 5.1. Oh, now I see... I never ran the Image in Photoshop, only from bridge processor. You're right, it offers various options of bridge.

  In any case, I found it what I was looking for.

  Opened upward (not running!) the Image Processor.jsx file. I opened it ExtendScript Toolkit. The path is/Applications/Adobe Photoshop CS5.1/Presets/Scripts/Image Processor.jsx

  I'm online 1574 (in other versions, the line number may vary)

  That's what the line says:

  var subFolderText = inFolderLocation + "/JPEG/";

  Replace:

  var subFolderText = inFolderLocation + ' / / ';.

  Problem solved. Repeat as needed for other folders you want not created (TIFF, PSD)

  Return to work!

• Problem using the image of the bridge processor

  I have been using Image Processor to process pictures of the bridge for some time. However, I recently received an error message when I try to open the bridge Image Processor, and I was not able to find the help topics that deal with my problem: I selects images in Bridge to process, and then click on "tools > Photoshop > Image Processor. Photoshop opens and the familiar image processor dialog opens. 1 in the says 'The bridge only process files' dialog box and the number of files I selected in parenteses. I select the file type and other parameters in #3 and #4 preferences. When I click "Run", I get an error message window that says: 'Script alert. There is no source file that could be opened by Photoshop. Image Processor works if I open the files in Photoshop first, and then run it by selecting ' file > Scripts > image processor ' and tell him to deal with all open files.

  Someone would be able to help me with this problem?

  Thanks, Larry

  Usually when it worked before and not now and you have not added any new software or hardware, I recommend you to reset the preferences.  Hold down the CTRL key and click the bridge to begin.  You should get a window to reset with 3 options.

• ProBook 650 G2: Core i7 6600U processor is only TWO CŒURS - evolution options?

  I recently got a HP Probook 650 G2.

  I 'wanted' the Probook for her one of the last phones built with serial port RS-232 'real' on board.

  I also wanted a quad core processor and would never have dreamed that a modern range high processor would double heart.

  BUT... I was surprised that the Core i7 laptop 6600U my new computer processor is only has TWO CŒURS and the cache 4megs.

  Ugh!

  That's when I remembered that ASSUMES is synonymous of...

  Then, when I went to the site of HP to check and sure enough, all i3, i5, and i7 is all dual-core.

  The only exception was the 6820HQ i7, which is a quad core processor, 8megs of the cache and features of the integrated Intel HD Graphics 530.

  I don't know how much better the Intel HD Graphics 530 on Intel HD Graphics 520 which came with my unit.

  Can a person spend power sipping dual core i7 in a muscle stronger, bending, gulping, four hearts, 8 power + megs of processor cache?

  The CPU is socketed?

  My current motherboard accepts a processor 68xxHQ?

  Should I think with the CPU stronger than using more power than a heatsink / fan different?

  My adapter work?

  The easiest way would be to buy a NEW laptop with the card I want, but it quite late for this.

  This Probook G2 650 was not cheap, and if I go to the boss for more of $, $$$ for another laptop... Well, it wouldn't be nice.

  Your comments, suggestions, opinions, and the flames are all welcome!

  Bryan Smith

  See p. 24 of the manual here.

  Manual

  See the long list of motherboards, each of which includes a processor? You asked if the processor is nested? No, it's not and it's the end of the upgrade quest, unless you traded the motherboard. I guess just the motherboard with i7-6820HQ is going to be well over $ 1000. How about almost $1500?

  https://parts.HP.com/hpparts/Search_Results.aspx?mscssid=ACF58104B267443785EDA1D549D7EFC2 & Searchin' = partnumber & SearchPN = 844346-601

  Before you throw stones at the 'simple' dual core i7 in your laptop, consider that it carries almost on par with a high range of 4th gen core quad.

  http://cpuboss.com/CPUs/Intel-Core-I7-6600U-vs-Intel-Core-I7-4850HQ

  High modern processors of range, especially in laptops, must also take account of energy consumption. Of course, a Quad Core Skylake will be still more than a beast. Video Intel 530 is a minor improvement on the 520 to the execution units, speed of clock and gflops as shown below:

  HD 520 graphics card	GT2	24	–	1050	403.2
  Graphics HD 530	GT2	24	–	1150	441.6

  The graphics of the Iris is where it begins to be significantly better.

  If find you a way to talk to the boss into something again consider the Zbook G3 series. It can be fitted with up to a Quad-Core Xeon, but even those that are welded on. It seems to be the trend. I think that power management got so delicate that it is difficult to prevent the loss of power by any sort of a processor of half-bridge and everything should be as thin as possible for consumers, even cell phones from the muscle work station.

  Post back with more questions.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Pavillion g7z-2200: upgrade my processor g7z-2200

  I have a portable g7z-2200 with AMD processor A4-5000. the processor is possible upgrade to a faster processor. If so, what is compatible with my motherboard?

  THx

  Now that we have here the number of good model is the manual of law:

  Manual

  This model also has a half-bridge processor onto the motherboard, then Yes you can upgrade one:

  AMD® A10 - 5750 M 2.50 GHz processor (turbo up to 3.50 GHz; 1600 MHz FSB, L2 cache, DDR3, QuadCore, 35 W 4,0 MB)

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Pavilion 15-e017TX: update the material! processor gpu

  Dear Sir.

  I want to know wheather it is an available option on any kind of exchnage of my laptop processor upgradation, my RAM not & GPU change. I am very concerned about his performance.

  Here is my PC information.

  Spoiler (Highlight to read)

  

  

  Please guide me! Thanks in advance...

  Bad news I am sorry to say. Your model has the processor i3 - 3110M and for models, the processor is actually welded to the motherboard, which means that you have no real option for an upgrade of the processor. There is never a real option to change the GPU this chip is soldered to the motherboard, even on models that have a half-bridge processor.

  Here is the service manual which lists cards mothers on page 23 and 24:

  Your repair manuals

  Memory can be upgraded to 8 gigs and probably you would just add an additional 4 GB memory of DDR3L-1600 phone module, preferably a single module match existing. There are 2 slots easily accessible through an access on the bottom panel. See pages 53 and 54. Upgrade to 8 GB would be a significant improvement.

  You can improve the overall performance better with a SSD drive, installed in place of the mechanical hard drive of old school. This makes the system much faster start-up and apps to open more vivid, but it won't make the video work better.

  Let us know if you have any other questions.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Inspiron N7110 processor upgrade

  Hello, I have the 2350 M processor i3 and I was wondering if it is possible at all to switch to an i5 or an i7.
  I saw one being dismantled, and it looks like he has a half-bridge cpu.

  JoeTerry93,

  Sorry for the late reply,

  It is difficult to find the i5 or i7 processor that is not four hearts, you may need to search the manufacturer's Web site to check if the still offers dual core i5 or i7 processor.

  Please add me as a friend and send me you have the label, then we can help you further.

  Always happy to help.

  Thank you

  Aashish Stifler

  Professional social outreach

  You can reach us at http://en.community.dell.com/

• Upgrade of the 5000 series processor Laptop Inspiron 15

  Hello!

  Can I put my Inspiron 5558 with a quad core CPU? If so, with what has been tested?

  Concerning

  Although there are versions of this expedition of model with quad core CPU, a few considerations:

  The CPU is soldered to the system board, so the card mother set must be replaced to upgrade.  This has two consequences:

  1. it's expensive - think more of 50% of the initial cost of the system, and

  2. it cancels any warranty remaining on the system.

  With anything other than the very high quality of our days laptops, the CPU is not extensible - except for one very little other high-end work stations and games books, half-bridge processors that can be upgraded are a thing of the past.

• NEITHER 9237 quarter bridge absolute accuracy

  Given a NI 9237 bridge completion Module with NI 9944 accessory Terminal strain gauges and 120 ohms with GF = 2.11, how calculate we precision of strain?

  I was told that the absolute accuracy for bridges of quarter is given by

  Absolute accuracy = (Gain error * reading) + (error offset * range) + noise + half bridge watchkeeping tolerance tolerance.

  Since I'm on the NI 9944, watchkeeping tolerance would be 500 uV/V (given by OR R & D). The tolerance of half bridge is given in the manual OR 9237 being 1.2 mV/V.

  (1) it has no value of 'Noise' of entry for bridges on watch in the NI 9237 manual; We use only the sound of half-bridge?

  (2) if I use a sample rate of 1,613 kech. / s (the rate guaranteed valid sampling for the NI 9237 module) and my system is always in his 1st year of use, always is my gain error 0.05%? It is worth noting that 0.05% applies to the 50 kech. / s ; If the gain error does not apply to my low sampling frequency, how can I find the error of gain?

  (3) if my maximum/minimum deformation measures around 600 EU (microstrains), how can I change my values "Reading" and "Range" in the equation for absolute accuracy above, if they need to be adjusted?

  (4) why the absolute accuracy for a quarter-bridge set up does not include the half bridge tolerance?

  (5) is the equation for the conversion of precision of voltage precision for quarter of a bridge, of the strain , where U is the precision of the voltage given by the equation of absolute accuracy above.

  Example of calculation using the values assumed for quarter-bridge:

  Error error/gain Offset = 0.05%

  Reading distance / = 25 mV/V

  Half bridge noise = 1.6 mV/V * 3

  Half bridge tolerance = 1.2 mV/V

  Tolerance of watchkeeping = 500 uV/V

  Absolute accuracy = (V/V 0.0005*.025) + (0.0005*.025 V/V) + ((1.6e-6) * 3 V/V) + (1.2e - 3 V/V) + (500-6 V/V) = 25 mV/V +/-1.73 mV/V

  Accuracy of the strain =-4(V/Vex) / GF (1 + 4 (V/Vex)) = - 4 * (25 mV/V +/-1.73 mV/V) / (2.11) * (1 + 4 * (25 mV/V +/-1.73 mV/V))

  How to simplify this precision of strain to get a reading + / range of precision?

  Thanks for any help.

  (2) if I use a sample rate of 1,613 kech. / s (the rate guaranteed valid sampling for the NI 9237 module) and my system is always in his 1st year of use, always is my gain error 0.05%? It is worth noting that 0.05% applies to the 50 kech. / s ; If the gain error does not apply to my low sampling frequency, how can I find the error of gain?

  This applies at a rate of 50 kech. / s. lower data rate can have up to 0.20% gain additional error reading.  This can be found on page 24 the unit operating instructions and specifications document

  You get to know how to calculate what percentage of Reading (Gain error) I'd get according to what sampling frequency use? Otherwise, I guess I could use the error of gain of 0.20% in the worst case scenario.

  Yes, I so calculate the error of Gain for the worst case scenario (0.2%)

  (5) is the equation for the conversion of precision of voltage precision for quarter of a bridge, of the strain , where U is the precision of the voltage given by the equation of absolute accuracy above.

  Yes, I think it's the correct equation.

  It is more a matter of math - since you will be in the form of a reading + / a range (for example 25 mV/V +/-1.73 mV/V), do you know how I simplify or interpret the accuracy of strain after its replacement by the U-value?

  Accuracy of the strain =-4(V/Vex) / GF (1 + 4 (V/Vex)) = - 4 * (25 mV/V +/-1.73 mV/V) / (2.11) * (1 + 4 * (25 mV/V +/-1.73 mV/V))

  Just reuse the worst cases to calculate positive and negative values on 1.73mV.

• DV7-4070 port

  HP Pavilion DV7-4070US

  On the left side, there is a port labeled as (point 5 of the user ID of man) eSATA/USB port (some models only).

  Its function is indicated as - "connects to a pane optional high performance eSATA, such.
  as a drive eSATA external drive, or connect a USB option
  device.
  NOTE: Depending on the computer, the computer may
  include only a USB port.

  The port looks different from USB only and as an available eSATA connection.

  My question - is an eSATA port or a USB port?

  Or - is a port of the combination that will accept either?

  I find little or no info on this.

  Yes, you should be able to put USB in port... Here's how the Port... So you need to use a normal USB port... It can feel a little difficult to put into 1...