Halo 3 for the PC is going to be released? And if this is the case, then what is the release date?

Similar Questions

• ESXi is unable to install 'his place on the disk for the dump data' no ideas?

  It is an older server.

  Data sheet:

  GOING Linux 2200 series

  Intel P3 700 MHz x 2

  768 MB OF RAM

  9.1 GB SCSI x 3 (configured in RAID 5 now)

  I have attached a picture of the error message that is received and typed most of the message below.

  NOT_IMPLEMENTED /build/mts/release/bora-123629/bora/vmkernel/sched/sched.c:5075

  Frame 0x1402ce0 ip = 0x62b084 cr2 = cr3 = 0 x 0 = ox3000 cr4 = 0 x 20

  are is 0xffffffff ds is 0xffffffff fs = 0xffffffff gs = 0xffffffff

  EAX = 0xffffffff = 0xffffffff = 0xffffffff edx ecx ebx = 0xffffffff

  = 0x1402e3c = 0xffffffff edi esi EBP = 0xffffffff err =-1 eflags = 0xffffffff

  * 0:0 / & lt; NULL & gt;  1:0 / & lt; NULL & gt;

  0x1402e3c: battery: 0x830c3f, 0x1402e58, 0x1402e78

  VMK availability: 0:00:00:00.026 TSC: 222483259709

  No space on disk for the dump data

  Waiting for debugger... (World 0)

  Debugger is listening on the serial port...

  Press ESC to enter the local debugger

  This could be a simple problem or not, I'm not sure. I spent several hours already trying to reconfigure the readers to try to get the installation to recognize.

  Any help is greatly appreciated.

  I agree with Matt, the material can be simply too old-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Need to create a structure for the target data store?

  Hi Experts,

  If I create a structure for the target data store, and then load the data from source to target works fine. If I make mistakes.

  Is necessary to create a structure for target?

  Please help me...

  Thanks in advance.

  A.Kavya.

  I found the answer. No need to create the structure for target temporary data store. and we need to create the structure for the permanent target data store.

• Need to retrieve the data for the current date.

  Hello

  I have a table which then retrieves information when using this command.

  Select ta_acct, shift, created_on track_alerts;

  Technicolor A 24 March 14

  Technicolor A 24 March 14

  Technicolor A 24 March 14

  Technicolor A 24 March 14

  Manitoba telecom a 24 March 14 system

  Technicolor A 24 March 14

  I used this statement to retrieve the data for the given date.

  Select ta_acct, shift, created_on track_alerts where created_on = 24 March 14 ';

  Its not data recovery.

  Need help.

  Kind regards

  Prasad K T,.

  984002170

  Prasad K T wrote:

  Yes the created data type is date.

  CREATED_ON

  DATE

  Partha thanks it works now.

  Select ta_acct, shift, created_on in track_alerts where to move is: Shift and TRUNC (created_on) = TO_DATE('24-MAR-2014','DD-MON-YYYY');

  Still, I made a small change to my querry.

  Select ta_acct, shift, created_on track_alerts where to move is: shft and TRUNC (created_on) = TO_DATE (select double sysdate,'MON-DD-YYYY "");

  For this statement, it does not work.

  of course not...

  first: sysdate returns a date so no need of conversion here

  and

  second SYSDATE includes time, so your application should look like this:

  Select ta_acct, shift, created_on in track_alerts where to move is: Shift and TRUNC (created_on) = trunc (sysdate)

  or

  Select ta_acct, shift, created_on in track_alerts where to move is: shft and created_on > = trunc (sysdate) and created_on<>

  HTH

• The number of heartbeat for the host data warehouses is 0, which is less than required: 2

  Hello

  I have trouble creating my DRS cluster + storage of DRS, I have 3 hosts esxi 5.1 for the task

  First, I created the cluster, no problem with that, so the DRS storage was created and now I can see in the Summary tab

  "The number of heartbeat for the host data warehouses is 0, which is less than required: 2".

  I search the Web and there are similar problems when people has only a single data store (the one that came with ESXi) and need to add another but in my case... vcenter detects any...

  In the views of storage I see the store of data (VMFS) but for some strange reason the cluster not

  In order to achieve data warehouses minimum (2) can I create an NFS and map it in THE 3 esxi hosts? Vcenter which consider a play config?

  Thank you

  You probably only have local data warehouses, which are not that HA would require for this feature (pulsations datastore) to work properly.

  You will need either 2 iSCSI, FC 2 or 2 NFS volumes... Or a combination of the any of them, for this feature to work. If you don't want to use this feature, you can also turn it off:

  http://www.yellow-bricks.com/2012/04/05/the-number-of-vSphere-HA-heartbeat-datastores-for-this-host-is-1-which-is-less-than-required-2/

• Difference in the number of records for the same date - 11 GR 2

  Guy - 11 GR on Windows2005 2, 64-bit.
  
  BILLING_RECORD_KPN_ESP - is a monthly partitioned table.
  BILLING_RECORD_IDX #DATE - is a local index on "charge_date" in the table above.
  
  SQL > select / * + index (BILLING_RECORD_KPN_ESP BILLING_RECORD_IDX #DATE) * /.
  2 (trunc (CHARGE_DATE)) CHARGE_DATE;
  3 count (1) Record_count
  4. IN "RATOR_CDR". "" BILLING_RECORD_KPN_ESP ".
  where the 5 CHARGE_DATE = January 20, 2013.
  Group 6 by trunc (CHARGE_DATE)
  5 m
  
  CHARGE_DATE RECORD_COUNT
  ------------------ ------------
  2401 20 January 13-> > some records here.
  
  -> > Here I can see only '2041' records for Jan/20. But in the query below, it shows "192610" for the same date.
  
  Why is this difference in the number of records?
  
  SQL > select / * + index (BILLING_RECORD_KPN_ESP BILLING_RECORD_IDX #DATE) * /.
  (trunc (CHARGE_DATE)) CHARGE_DATE,
  2 count (1) Record_count
  3. FOR "RATOR_CDR." "" BILLING_RECORD_KPN_ESP ".
  "4 where CHARGE_DATE > 20 January 2013."
  Group of 5 by trunc (CHARGE_DATE)
  6 order by trunc (CHARGE_DATE)
  5 m
  
  CHARGE_DATE RECORD_COUNT
  ------------------ ------------
  192610 20 January 13-> > more records here
  JANUARY 21, 13 463067
  JANUARY 22, 13 520041
  23 JANUARY 13 451212
  JANUARY 24, 13 463273
  JANUARY 25, 13 403276
  JANUARY 26, 13 112077
  27 JANUARY 13 10478
  28 JANUARY 13 39158
  
  Thank you!

  Because in the second example you also select rows that have a nonzero component.

  The first example selects only rows that are 00:00:00

  (by the way, you should ask questions like this in the forum SQL)

• Recommended value for the BAM data expiration time

  Hello
  
  Can someone tell me what is the recommended value for the BAM data expiration time?
  
  Enterprise Server default is 24 hours, but I would like to be able to raise the average runtime instance after several months. Is it reasonable to the value of the time-out value a high value? Or it will have an impact on the performance of BPM/BAM?
  
  Thanks in advance.
  
  Best regards
  CA

  Normally, we keep the BAM data expiration time at halfway with 24 to 72 hours. For historical reports that you are looking for the Data Mart / Data Warehouse DB are more logical. This database stores the data forever and takes pictures at longer intervals, normally 24 hours. These data are not in time real normally then because a capture instant is only taken once per day but will give you historical reports that you are looking for. The data from this database structure is almost identical to the BAM DB.

• Not able to start agent cache for the requested data store

  Hello
  
  This is my first attempt in TimesTen. I am running TimesTen on the same host Linux (RHES 5.2) running Oracle 11 g R2. TimesTen version is:
  
  TimesTen Release 11.2.1.4.0
  
  
  Trying to create a simple cache.
  
  The DSN entry section for ttdemo1 to. odbc.ini is as follows:
  
  + [ttdemo1] +.
  Driver=/home/Oracle/TimesTen/TimesTen/lib/libtten.so
  Data store = / work/oracle/TimesTen_store/ttdemo1
  PermSize = 128
  TempSize = 128
  UID = hr
  OracleId = MYDB
  DatabaseCharacterSet = WE8MSWIN1252
  ConnectionCharacterSet = WE8MSWIN1252
  
  With the help of ttisql I connect
  
  Command > Connect "dsn = ttdemo1; pwd = oracle; oraclepwd = oracle;
  Successful login: DSN = ttdemo1; UID = hr; DataStore = / work/oracle/TimesTen_store/ttdemo1; DatabaseCharacterSet = WE8MSWIN1252; ConnectionCharacterSet=WE8MSWIN1252;DRIVER=/home/oracle/TimesTen/timesten/lib/libtten.so;OracleId=MYDB; PermSize = 128; TempSize = 128; TypeMode = 0; OracleNetServiceName = MYDB;
  (Default AutoCommit = 1).
  Command > call ttcacheuidpwdset ('ttsys', 'oracle');
  Command > call ttcachestart;
  * 10024: could not start agent cache for the requested data store. Could not initialize Handle.* Oracle environment
  The command failed.
  
  The following text appears in the tterrors.log:
  
  15:41:21.82 Err: ORA: 9143: ora-9143 - 1252549744-xxagent03356: database: TTDEMO1 OCIEnvCreate failed. Return - 1 code
  15:41:21.82 Err: 7140: oraagent says it failed to start: could not initialize manage Oracle environment.
  15:41:22.36 Err: 7140: TT14004: failed to create the demon TimesTen: couldn't reproduce oraagent for "/ work/oracle/TimesTen_store/ttdemo1 ': has not been initialized Handl Oracle environment
  
  What are the reasons that the demon cannot happen again to another agent? FYI, the environment variables are defined as:
  
  ORA_NLS33=/U01/app/Oracle/product/11.2.0/Db_1/ocommon/NLS/Admin/data
  ANT_HOME = / home/oracle/TimesTen/ttdemo1/3rdparty/ant
  CLASSPATH=/home/oracle/TimesTen/ttdemo1/lib/ttjdbc5.jar:/home/oracle/TimesTen/ttdemo1/lib/orai18n.jar:/home/oracle/TimesTen/ttdemo1/lib/timestenjmsxla.jar:/home/oracle/TimesTen/ttdemo1/3rdparty/jms1.1/lib/jms.jar:.
  Oracle@rhes5:/Home/Oracle/TimesTen/ttdemo1/info% echo $LD_LIBRARY_PATH
  /home/oracle/TimesTen/ttdemo1/lib:/home/oracle/TimesTen/ttdemo1/ttoracle_home/instantclient_11_1:/u01/app/oracle/product/11.2.0/db_1/lib:/u01/app/oracle/product/11.2.0/db_1/network/lib:/lib:/usr/lib:/usr/ucblib:/usr/local/lib
  
  
  See you soon

  I see no problem here. The ENOENTs are superfluous because it locates libtten here:

  23302 open ("/ home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/lib/libtten.so", O_RDONLY) = 3

  without doubt, it does the same thing trying to find the libttco.so?

  23302 open ("/ home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/ttoracle_home/instantclient_11_1/libttco.so", O_RDONLY) =-1 ENOENT (no such file or directory)

  Thank you for taking the trace. I really want to have a look at the complete file if you can send it to me?

• Tree node in data recovery for the 1st node only for the 3 data blocks?

  Hello alllll
  
  I have 3 BLOCKS of DATA master / detail-detail; GL_TYPES - < GL_ACCOUNTS - < GL_COMPANIES
  
  The Rel attribute between 1 and 2 is
  

  GL_ACCOUNTS. TYPE_ID = GL_TYPES. TYPE_ID

  is between 2 & 3 ADR
  

  GL_COMPANIES. ACCOUNT_ID = GL_ACCOUNTS. Account_id

  I have also a Tree is recovering the data in blocks of data, the following code, used in the trigger WHEN-TREE-NŒUD-SELECTED and it works fine, but not for all nodes;
  the selected node displays the data for the first node only. Assets to say but if I chose to any other node it returns no data?
  
  you could any boady pls explain to me why what is happening?
  
  The following code is:
  -----------------------------

  DECLARE
                      
          htree ITEM;
          NODE_VALUE VARCHAR2(100);
  
   BEGIN
  
   IF :SYSTEM.TRIGGER_NODE_SELECTED = 'TRUE' THEN  
        
  -- Find the tree itself.
  
   htree := FIND_ITEM ('BL_TREE.IT_TREE');
   
  
    NODE_VALUE := FTREE.GET_TREE_NODE_PROPERTY( htree, :SYSTEM.TRIGGER_NODE ,  Ftree.NODE_VALUE );
    
  
    GO_BLOCK ('GL_ACCOUNTS'); 
      
     set_block_property('GL_ACCOUNTS', DEFAULT_WHERE, 'GL_ACCOUNTS.ACCOUNT_ID = '  || 
     ftree.get_tree_node_property('BL_TREE.IT_TREE', :SYSTEM.TRIGGER_NODE, FTREE.NODE_VALUE));
  
   EXECUTE_QUERY;
   
   END IF;
        
   END;
  
  
   

  Kind regards
  
  Abdetu...

  I would say there is nothing in relation to tree now. Because the tree is to give the appropriate value for the setting of the block where clause. Check the relationship and that the cursor goes to the block expected where the data must be retrieved. Like you said tree account id that the tree is from the correct values.

  -Clément

• Request for the old data that does not correspond to new data within a given period

  Hi all
  
  The reports that I need to create one for all employees who were going from one Department to another within a given period. The way I ran this report in Reportsmith (taken from our old system) was to compare the dept field from the start date to the dept in the end date field and it gives me these associate who had moved. I had to do it this way b/c dept changes can occur using several different types of actions (change to Surv, promotion, etc.), none of them exclusive to only change dept. We now use Oracle HRMS and I need to create this report even with this system using SQL.
  
  Does anyone know how to compare the data between two different dates and shoot those who do not match? Your help will be GREATLY appreciated!
  
  Best regards,
  
  Yasmin E. Alberto
  HRIS analyst
  [email protected]

  Hello

  Here is an example of an INSERT statement that may be relevant to this issue:

  INSERT INTO emp_action (empno,   action_date,                           deptno)
                  VALUES     (7902,    TO_DATE ('2009-06-18, 'YYYY-MM-DD'),   10);
  

  If someone wants to help you, in doing anything more than guess, then that person probably will need create tables that are similar to yours (but much smaller).
  To do this, they can issue instructions CREATE TABLE to the tables, the INSERT commands to fill (put data in) the tables.
  The tables invloved in this problem are probably simple, so if I can see some INSERT statements, I can probably write instructions CREATE TABLE myself and save you the trouble.

  For more info on INSERT, see the [Manual of the SQL language | http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/statements_9014.htm#sthref8944]

  If you compare the deptno to a row of a table to the previous line, you can use the analytic LAG, something like this:

  WITH     got_prev_deptno  AS
  (
       SELECT     empno
       ,     action_date
       ,     deptno
       ,     LAG (deptno) OVER ( PARTITION BY  empno
                                   ORDER BY         action_date
                        )   AS prev_deptno
       FROM     action_table
  )
  SELECT     *
  FROM     got_prev_deptno
  WHERE   deptno         != prev_deptno
  AND     action_date >= TO_DATE ('2009-01-0'1, 'YYYY-MM-DD')
  AND     action_date <  TO_DATE ('2009-03-01', 'YYYY-MM-DD')
  ;
  

  Like all functions, the OFFSET is described in the [Manual of the SQL language | http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/index.htm#I].

  Published by: Frank Kulash, June 18, 2009 11:53
  Originally missed a few quotes.

• Use the 2nd column for the label data

  This should be easy. Online help for the numbers shows an example under Add graphics > adjust figure brands and labels.  My table is a simple 2-d column chart. In a single column, I have the weight in pounds, and in the second column, I have a date. When I have only the weight column selected in the form of data, I get a graph that is almost perfect, but there is no date label. When I try to include date data, I have a reverse relationship X and Y. Once I selected a cell as reference data, it doesn't have any way to deselect. What I want to do is chart weight against date and have the date appear as a label.

  Any advice is welcome.

  Hi innerserenity,

  I swapped the order of the columns. Column A is a column header.

  

  Kind regards

  Ian.

• Is there a configuration parameter that can be set so that the various web pages can NOT disable the ability for the latest data from the Clipboard in a field instead of typing

  Occasionally various websites have forms to fill out. Frequently, the password field and the ability to paste from the Clipboard is disabled. Since I use a password manager and generate passwords as mN0ZJ1Pj (generated example for display) she would like to be able to paste the password because there is less tendency for me for spelling errors.

  I would like to know if there is a configuration setting that causes the instructions on the web site to disable the ability to stick to be ignored. My position is that it's MY computer and I should be able to do what I want on my end.

  Thank you.

  Fred

  Go to the Mozilla Add-ons Web Page. There is an add-on called RightToClick. Look around. There are a lot of good stuff here.

• For the complex data type, how to generate the Dll with compatible interface to C/C++

  Hello

  I used the Labview FPGA module to develop test equipment. Now, I need to write a driver that is to be a Dll with compatible interface to C/C++ for this equipment. So that my client who is familiar with C/C++ can call the driver without any study on labview. But I had a few problem on how to convert labview for C/C++ data complex data type. To clearly explain to my question, I have attached a simple example. (see attachment) I try to generate a Dll for the attached example VI and get the the function prototype at the head of the files as below:

  ' void OpenFpgaReference (LStrHandle * RIODevice, TD1 * errorIn, LVRefNum * FPGAVIReferenceOut, TD1 * errorOut).

  As you have known, the type of data "LStrHandle * RIODevice" and "LVRefNum * FPGAVIReferenceOut" Labview data format are. C/C++ do not have this kind of data type and can not reconige it. As a result, I can't call the Dll of C/C++ programming language. How to convert these two data type of labview for the C/C++ compatible data format, and then build the Dll? Anyone know about this?

  The answer is really apprecaited! Thank you in advanced.

  Ivan.Chen wrote:

  As I found in the following article:

  http://digital.NI.com/public.nsf/WebSearch/FB001AA027C8998386256AAD006C142D?OpenDocument

  LVRefNum is the name of resource of LabVIEW VISA or refnum, and "it is impossible to convert LabVIEW VISA name of resource or refnum VISession valid ID."
  This means that external code modules can not access & control the session VISA which is open by labview. But for my purposes, I will not attempt to access this VISA extenal code(C/C++) session. I just hope that save this session VISA in the external code once I opened it in Labview dll; and pass it to the labview dll when needed. While I have not need to login again when I need to control the device. Is it possible to do?

  A LVRefNum is really just a single int32 value. Its meaning is useless for other environments than those who created it so that you Michael not any what in C/C++ caller but pass it back to other functions in your DLL, but this often isn't a problem at all.

  You can take the following statement of the LabVIEW extcode.h headers and add them to your delabviewed header files to make it work in such a way.

  #define Private (T) typedef struct T # _t {void * p ;} * T}

  Private (LVRefNum);

  The LStrHandle you must set a standard C string instead in your export DLL and document what is the size of the string buffer should have if it is an output parameter.

  TD1 error clusters should also be divided into their parameters (C compatible) separate for all items or just to the left of suite entirely.

  Rolf Kalbermatter

• Filter KeywordFilterField customized for the tabular data model

  I am currently looking for the rows in the table that is filtered through the KeywordFilterField. The underlying data are in table form:

  Contact {name, phone, etc etc}

  The KeywordFilterField shows only what I pass to it (Contact.Name) by calling setSourceList() and filters that the channels in the list. So if I get the numbers, which will return a list empty, because none of the Contacts have numbers in their names.

  However, what I want to do is query the table, like a SQL query, retrieve lines that correspond to a part of Contact.Name or Contact.Phone. (Remember this application don't use SQLite.) I'm using RMS to persistent storage and I created my database and queries of base by hand.)

  Is there a way I could customize/override the filter query so that the KeywordFilterField calls my query functions rather than it's default filter String? It is a base with search CRUD application. I use KeywordFilterField because it's everything I need.

  Any help would be useful.

  It is possible with a text field and a list field, this way you can make your own personalized search for the keyword filter field does not search your data the way you want. In addition, I know that the keyword filter field is broken and that it was returning always completely incorrect search result for me.

  Here's an overview of what to do. Some things I can't tell you how for example to what is happening in the function "searchContacts" since it is up to you to write the code to do whatever custom search you want.

  class CustomKeywordFilterScreen extends MainScreen implements FieldChangeListener, ListFieldCallback
  {
      //just a slightly modified edit field for use in entering keywords
      private CustomKeywordField _filterEdit;
      //a standard list field
      private ListField _countryList;
  
      //temp variable to hold the last keyword searched so we don't search for it again
      //you'll see this used later on
      private String _previousFilterValue;
  
      //any other private vars you need to hold search results go here
      //we'll use an a Contact[] for illustration
      private Contact[] _contactResults;
  
      CustomKeywordFilterScreen()
      {
          super(Manager.VERTICAL_SCROLL | Manager.VERTICAL_SCROLLBAR);
  
          //initiaize to empty string
          _previousFilterValue = "";
  
          //searchContacts is whatever function you write to do the customized search you want,
      //in this example passing an empty string returns all contacts
          _contactResults = searchContacts(_previousFilterValue);
  
          //create the edit field and set it as the title of the screen so it's always visible,
      //even when you scroll the list
          _filterEdit = new CustomKeywordField();
          _filterEdit.setLabel("Search: ");
          _filterEdit.setChangeListener(this);
          setTitle(_filterEdit);
  
          //create the list for showing results
          _contactList = new ListField();
          _countryList.setRowHeight(-2);
          _contactList.setSize(_contactResults.length);
          _contactList.setCallback(this);
          add(_contactList);
      }
  
      protected boolean keyChar(char c, int status, int time)
      {
          if (c == Characters.ESCAPE)
          {
          //user pressed escape key, if there's something in the edit field clear it
          //otherwise handle it as closing the screen or whatever else you want
              if (_filterEdit.getTextLength() > 0)
              {
                  _filterEdit.setText("");
              }
              else
              {
                  //close the screen or do something else, it's your call
                  //maybe even do nothing, whatever you want
              }
              return (true);
          }
          else
          {
          //all other keystrokes set focus on the edit field
              _filterEdit.setFocus();
          }
          return (super.keyChar(c, status, time));
      }
  
      public void fieldChanged(Field field, int context)
      {
          if (field == _filterEdit)
          {
          //test the edit field's value against the previously searched value
          //if NOT the same then do a search and refresh results
              if (!_filterEdit.getText().equals(_previousFilterValue))
              {
              //cache the newest search keyword string
                  _previousFilterValue = _filterEdit.getText();
  
                  //search your data
                  _contactResults = searchContacts(_previousFilterValue);
          //update the list size to cause it to redraw
                  _contactList.setSize(_contactResults.length);
              }
          }
      }
  
      public void drawListRow(ListField listField, Graphics graphics, int index, int y, int width)
      {
          if (listField == _contactList && index > -1 && index < _contactResults.length)
          {
              //draw your list field row as you want it to appear
          }
      }
  
      public Object get(ListField listField, int index)
      {
          if (listField == _contactList && index > -1 && index < _contactResults.length)
          {
              return (_contactResults[index]);
          }
          return (null);
      }
  
      public int getPreferredWidth(ListField listField)
      {
          return (Display.getWidth());
      }
  
      public int indexOfList(ListField listField, String prefix, int start)
      {
          return (-1);
      }
  }
  

  class CustomKeywordField extends EditField
  {
      CustomKeywordField()
      {
          super(USE_ALL_WIDTH | NO_LEARNING | NO_NEWLINE);
      }
  
      protected void paint(Graphics graphics)
      {
          super.paint(graphics);
  
          //Draw caret so the edit field always shows a cursor giving the user an indication they can type at anytime,
      //even when the focus is on the list field that is used in conjunction with this edit field to create a
      //keyword filter field replacement
          getFocusRect(new XYRect());
          drawFocus(graphics, true);
      }
  }
  

• There will be review certification essentials (OCS) for the GREAT DATA Oracle?

  Hello

  I often hear about this subject called BIG DATA much in the arena of the database

  and even at Oracle.

  Will there be a Big data Oracle Certification?

  Roger

  For now, I have no information on this subject.

  Kind regards
  Brandye Barrington

  Oracle Certification program.