Halo Combat Evolved does not work on my windows 7 64-bit

Similar Questions

• Halo: Combat Evolved for PC works only on Windows Vista - Error Message "" unload the debugger, and then try again."

  I'm having a problem running Halo: Combat Evolved on Windows Vista. I can insert the disc and install the game without problem. The problem is that when I try to launch the game, I get error message saying "" unload the debugger, and then try again." I tried to install some of Halo patches to see if that would fix the error (for example, 1.6 and 1.7), but when I try and open the patch .exe file I get an error message telling me to go to a microsoft Web site or try to update the game manually. In addition, I tried to contact Gearbox Software to see if they could help me, all they said was to contact Microsoft.

  Does anyone have any suggestions as to why the game does not work for me and how can I make it work?

  Let me know, thanks. :)

  Hello whyohwhy42,

  I suggest that you follow the section below. This includes various possible steps to solve this problem:

  http://support.Microsoft.com/kb/812759

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Why aac audio does not work in PowerProducer Windows Vista 32-bit?

  My friend has a Blu - Ray burner that is packed with PowerProducer 5. They have installed on their PC 32-bit of Windows Vista. Its HD files AAC audio camera mp4 video. The audio does not work in the environment creation of PP, or burned discs. I downloaded all the codecs. The audio works fine in WMP and QT, as well as in Windows Movie Maker. Installed the same software on my Windows 7 computer and audio works very well.

  I have contacted Cyberlink, makers of PowerProducer, and they said that the limited packaged version of the software does not support the AAC. They suggested that upgrade to the full version for $50. Obviously, I'm not quite confident in this response.
  Someone has an idea of what might be past or have suggestions of what to try to fix the error?

  Hi ClintWatson,

  Because the problem is specific to this particular application, I suggest you to contact CyberLink support for better support.
  http://Forum.CyberLink.com/Forum/forums/show/3.page

• BlackBerry Simultor does not work properly in Windows 7 64 bit

  I downloaded 6.0.0.141 and Simulator 4.6.1.333,5.0.0.621 yesterday. My current system is Windows 7. The java version is

  Java version "1.6.0_17".
  Java (TM) SE Runtime Environment (build 1.6.0_17 - b04)
  Java for 64-bit Server VM (build 14, 3 - b01, mixed mode).

  I had the following problems for all 3 simulators:

  (1) I can not close the Simulator and am forced to use the Task Manager.

  (2) the simulation do not repaint correctly

  (a) sometimes it do not repaint at all. I need to reduce, then restore to make repainting occur.

  (b) sometimes the label of the icon gets repainted, but not the icon itself.

  (c) sometimes a part of the window gets repainted.

  (3) the commissioning of the Simulator is really slow.

  I worked with the a 4 month simulators, in a 32-bit Vista system. I don't have these problems.

  Can someone confirm that these problems are specific to Window 7 64-bit? Is there a solution?

  Thank you!

  You can try graphic acceleration completely disable?

• retailer 4.1 Nokia Software Update does not work on my windows 7 64 bit. Why?

  nokiaSoftwareUpdaterForRetail.ErrorHandling.Exceptions.UnexpectedErrorException: activation of logic is broken---> System.BadImageFormatException: is not a valid Win32 application. (Exception from HRESULT: 0x800700C1)
  at Nokia.ProductApi.ProductApiLoader.ProductApiLoaderClass.LoadFromPath (String bstrPath)
  at Nokia.CareSuite.ProductAdaptation.Papi.InitializeProduct (String papiPath)
  at Nokia.CareSuite.ProductAdaptation.Papi.Initialize (String papiPath)
  to NokiaSoftwareUpdaterForRetail.Castor.CastorEngine.InitializePapiProduct (DataPackage dataPackage)
  at NokiaSoftwareUpdaterForRetail.Castor.CastorEngine.InitializeSelectedProduct)
  at NokiaSoftwareUpdaterForRetail.Castor.CastorEngine.RunInternal)
  at NokiaSoftwareUpdaterForRetail.Castor.CastorEngine.Start)
  at NokiaSoftwareUpdaterForRetail.Logics.RetailLogic.EnableAllLogics)
  -End of the exception stack trace internal-
  at NokiaSoftwareUpdaterForRetail.Logics.RetailLogic.EnableAllLogics)
  at NokiaSoftwareUpdaterForRetail.App.TaskDoWork)
  at System.Threading.Tasks.Task.InnerInvoke)
  at System.Threading.Tasks.Task.Execute () at NokiaSoftwareUpdaterForRetail.Logics.RetailLogic.EnableAllLogics)
  at NokiaSoftwareUpdaterForRetail.App.TaskDoWork)
  at System.Threading.Tasks.Task.InnerInvoke)
  at System.Threading.Tasks.Task.Execute)

  Request to give me this error... Please someone help me

  Hello

  You can contact the Nokia support for assistance with this issue. They would be able to better understand this problem and could help you if you are missing on the pre-requisites that requires the 4.1 update to work on Windows 7.

  I hope this helps.

• Halo 2 for windows vista does not work on my windows 7. Saiys it cannot start the direct customer

  original title: Halo 2 for windows vista

  Halo 2 for windows vista does not work on my windows 7.  Saiys it cannot start the direct customer.  It will not work in single user either...

  Hello

  Plase make sure you have the latest version of the GFWL Client installed:

  http://www.Microsoft.com/games/en-us/live/pages/livemarketplace.aspx

• I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

  My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Is anyone know how can I access my hard drive again?

  Thank you

  Hello

  You has made changes to the system before the error appearing?  Cancel the changes.

  (1) in Device Manager > right click on the driver, and then select uninstall

  Reboot and Windows will reload the driver

  (2) remove the upper & lower filters that cause errors in Code 31

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  Access the manufacturer's Web site and search for updated driver

• game error: 2 zoo tycoon does not work on my windows vita he says I do not have enough system memory

  Tycoon Zoo 2 does not work on my windows vita it says I do not have enough system memory and I have a lot to run the game, I can't understand what is wrong

  ---------------

• This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.

  Jake

  Hey Jake,

  Follow these methods.

  Method 1: Follow these steps:

  (a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.

  (b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.

  (c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:

  Remove or reconfigure newly installed unit.

  Restore a version prior to updating the driver.

  Use system restore to undo the Device Manager recent related changes.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  (d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Update the latest graphic drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Computer does not recognize network. -This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello!

  I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:

  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?

  Thank you!

  Hello

  You must get the drivers latset for m computer support site.

  Delete the "false: entry in Device Manager and install the new drivers."

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Error: This device does not work properly because Windows cannot load the...

  I get this error message "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) "via a wired connection. And that's the Microsoft 6to4 adapt #7 and the same card but the #4 one.  Are these drivers or another file that I could use DL?

  Hi JasonBedgood,

  1. Once you get the error message?
  2. did you of recent changes on the computer?

  This error occurs if the required driver is not installed or the driver is damaged.

  I suggest that you update the driver for the device and check.

  How can I update the driver for network card on the computer

  1. click on Start, click Control Panel, and then double-click System.
  2. click the tab hardware , and then click Device Manager.
  NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
  3. click on network adapters to expand.
  4. under network adapters, double-click the entry for Microsoft 6to4and then click driver .
  5. click on Update driver software.
  6. follow the Wizard update software driver to update the driver for NICs .

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the device driver update did not help then check the link below for one of the thread with the question and try the steps mentioned by Lionel Chen on January 9, 2008
  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.

  Thanx

  Hi rui2010,

   

  Place your machine in a clean boot State to see if another application is in conflict with the modem.

  If this fails, I recommend you reach out to the community Hauwei for assistance:

  http://Forum.Huawei.com/jive4/Forum.jspa?forumid=46&orderStr=9

   

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows to this day does not work on my Windows 7.

  Original title: windows update

  Windows to this day does not work on my windows 7, the new facility. its valid correctly.

  Base on any relocation is to disable windows update search ("Never search updates", restart setting). Then install preferably a recent customer of update windows manually, KB3102810. From this point on windows update is used for the initial search.

  Best regards, VZ

• This device does not work properly because Windows... this device. (Code 31)

  Hello buddies, how to solve this problem (code 31)

  USB does not work on my PC, I found that it was the problem of the unit. and he wrote that this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  How can I solve this problem?

  In addition, you can check the following registry key? :

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)

  Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

  If so, what is 'Data' for these names?

• my hp 4100 series all-in-one does not work on my windows 7 but work fine on my xp computer why

  my HP 4100 Series 4100 all-in-one DOES not work on my windows 7... but worked fine on my xp computer and a ruin my driver not compatible?

  You must download and install the appropriate drivers for your version of Win7 from this link.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=29118&prodTypeId=18972&prodSeriesId=83436&cc=us

  I hope this helps.