Hands-free features not supported in the current context of material

Similar Questions

• vmrun return "this operation is not supported with the current permit.

  Hello

  I just installed the 5.1 esxi and I have 2 vm windows works well.

  I use the vSphere client to manage the hypervisor.

  I have not installed vCenter stuff, so it is just bare hypervisor os.

  When I ran the following:

  «vmrun t h 10.10.0.9:443 u vpxuser Pei xxx list esx»

  He returns with "this operation is not supported with the current permit.

  In fact, I have installed esxi5 on hypervisor licensing, do not know why I get this error message.

  Access the esxi5 through the sphere client works very well (I could create vm, take snapshots, etc.).

  Please let me know if I missed any steps. Thank you

  -antony

  Welcome to the community,

  with the free license of the hypervisor, access to vSphere API is restricted, which is most likely causing this issue. To unlock the API, you must have a paid license. Unless your host has already exceeded the 60-day evaluation period, you could try to revisit the evaluation mode to see if the command works as expected.

  André

• Open automation: function not supported in the current target.

  I get the error of the said above when you try to use the function of automation open on a target FPGA Compact in RIO. This function is not allowed on these objectives? Is there a way around it?

  Thank you

  Mosteiro of Pablo

  Princeton University

  [email protected]

  The open VI automation creates references to ActiveX objects, these are not supported on the target FPGA. You should use these functions on your host processor. The FPGA VI is intended for communication with your e/s and high speeds.

• HP Officejet Pro 6830: NEW HP PRINTER only IS NOT supported with the current El captain on Apple Mac software

  Hi have just purchsed the HP officejet Pro 6830 and the course of development in place, is that the current operating system (Mac El Captain) does not support this printer. FRUSTRATING! Suggestions that I can download other software that will support the printer or do I have to return it and get another printer?

  Hello!

  Try the printer driver called HP v3.1 for Apple's OS X printer drivers.

  You can download it here: https://support.apple.com/kb/DL907?locale=en_US

  Let me know if this helped.

• Type is not supported in the current target.

  I am trying to write a simple FPGA program to read in an array and output a number at a time. But I get an error saying unsupported in the current target Type. What I am doing wrong. my code is below

  FPGA is not the numbers floating point (such as DBL). You can use integers or fixed numbers.

  You want to convert the DBL in I16 anyway, so do the table I16.

• Help: Cannot open any application "Safari" because PowerPC is not supported on the current computer

  Hi all

  Until I look crazy, my Mac Book Pro (end 2011) is still running. Today, I already had some running applications (Safari, Virtual Box, etc.). When I tried to open a new window, Safari said "no internet connection".  I shut Safari and attempted to restart.

  "Failed to start Safari because PowerPC applications are no longer supported."

  He then removed Safari from the dock.

  Environment:

  MacBook Pro (late 2011)

  68 GB free on 700 GB HDD

  El Captain (10.11.4)

  I tried to open Contacts. Same error message.

  

  To be clear: these are the built-in applications on the Mac.

  While I download application files, I'm fairly warned about scams and not did something recently on the machine.

  I hesitate to restart where it tells me that my entire machine is a Power PC application and is no longer supported.

  Has anyone ever heard talk about something like that?

  Thank you

  Andrew (write in a VM on the Mac as the app still works)

  FYI - I have Remote Desktop running and was able to connect to a machine on the Internet, however, I can not start any application, Console.

  

  Test in safe mode: try safe mode if your Mac does not commissioning - Apple Support

  If the problem occurs in safe mode, and then reinstall through recovery.  Reinstall will not erase your data, it won't replace system files and included OS X applications.

  How to reinstall OS X on your Mac - Apple Support

• The content you are trying to view is not supported in the current Mode of Internet Explorer Document. Change the Document Mode on Internet Explorer 9 standards and try to view the content again. To change the Document Mode, press F12, click on Mode of Do

  Hello

  I have this problem, I've read a few other discussions concerning this error when running with IE 8, 9. I understand that this problem can be solved by publishing the HTML5 and SWF output format.

  But here's my problem, I work for a very large approval with thousands of computers that use IE 8 and 9 on all computers and also my project is a sensitive project. We are reactive nature projects to facilitate staff to take courses wherever they are to increase the percentage of compliance with their mandatory training. So when I publish my work in sensitive my only choice is to HTML5 output, when I try to follow the course on our LMS I get the above error message (title).

  Anyone have any suggestions as to what is the best way I could overcome this problem? Your advice is much appreciated.

  IT COULD SAVE MUCH TIME IF ADOBE COULD ALLOW REACTIVE nature PROJECTS to PUBLISH IN TWO HTML5 & SWF OUTPUT BECAUSE don't FORGET a SENSIBLE PROJECT MUST ALSO BE EXECUTED ON computers in OFFICE AND it IS USUALLY THE DEVICE TARGET PRIMARY AND MOBILE DEVICES ARE CONSIDERED AS SECONDARY IN MY CASE.

  Thank you very much

  Although the Adobe staff visit these forums, scream (as Lilybiri has quite rightly pointed out) is not a way to get their attention. You can try your luck by sending a request to feature here.

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform&product=5

  Anthony

• Feature not supported in mass cases Tester

  Hello
  
  I get an error of not taken function supported in mass cases Tester when I try to use the data in reference to boot my modules.
  
  Please let me know what could be the possible cause of this error. Is the use of reference data not supported in the current version of MCT?
  
  The details of the error are:
  
  This is a feature not supported
  Exception: Exception
  Message: This is a feature not supported
  Source: Oracle.Policy.Modeling.MassCaseTester
  HelpLink:
  TargetSite: Boolean Check()
  Stack trace:
  at Oracle.Modeling.MassCaseTester.RulebaseChecker.Check)
  
  
  
  Thank you
  Aakarsh

  Unfortunately you are right - given reference are not supported in the current version of the MCT.

  It is expected that it be fixed for the 10.2 release.

• The sim card that you are currently installed in this iPhone is a carrier that is not supported under the activation policy that is currently affected by activation serv

  The sim card that you are currently installed in this iPhone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server...

  Can anyone helpe me...? My phone is locked to O2, but since June 2013 is factory unlocked. Contact O2 for more information, and the answer was: "is everything okay". My phone is now unused, but the sstrange thing is that I can receive phone calls

• Error creating - snapshot operation is not allowed in the current state

  Hi all

  Using Veeam Backup & Recovery 6 software to replicate a LIVE VM (virtual MACHINE, 1). But I can't and I got the following error:

  Error creating - snapshot operation is not allowed in the current state

  The above virtual machine can only be copied when it is STOPPED the VM is running on ESXi 4.0.

  I have a more LIVE VM (virtual MACHINE, 2) on the ESXi Host which I was able to replicate successfully to another ESXi host.

  I contacted the Veeam Support before posting here.

  Things to note about VM 1: I can't take a snapshot manually from the vSphere client. This option is greyed (disabled) on VM1... While its OK on VM2.

  Veeam support told me that since its software uses the snapshot function of ESXi and this feature is disabled, replication cannot continue.

  Thanks for helping me on this.

  Exactly what I thought. When you delte this PCI passtrough your Backup Exec tape will not longer work.
  You will not be able to do replication when you use this passtrough.

  Only solution for replication (which is what I think you want for purposes of disaster) is to install a 3rd VM (or as physical) as "Backup Server" where you install Backup Exec and enable PCI-Passtrough to your tape drive. Then this new virtual machine with Backup Exec backup.

  After that you can delete the passtrough of your SBS and your replication will work.

  Sorry

  Concerning

  Simon

• Adding disk IDE of addition is not supported at the moment

  Hello

  While I'm trying to add a disk to a new virtual machine, it gives and error "adding existing IDE disk is not supported at the moment." IDE drives cannot be added hot or there is no available free IDE controller locations.

  Note: The disk is question is not attached to a virtual machine and on the other hand, we are able to add another disk to the new virtual machine.

  Any ideas?

  This is exactly why I figured out too. Sorry I have not post on this thread right now also, as I've done here:

  http://communities.VMware.com/thread/235718

  Lars

• While the iPhone overseas requires a reactivation, which sometimes works, but more often does not work. At the beginning he said that my SIM card was not supported by the activation policy assigned by the activation server.

  iPhone 6

  Network: Verizon

  iOS 9.3.3

  Twice now, once in Costa Rica in April and, more recently, in Ireland, while that phone overseas warning reads as follows:

  "your iPhone could not be activated because the activation server is not reachable. Try to connect your phone to the iPhone to activate it, or try again in a few minutes. If the problem persists contact Apple Support to Apple.com/support. »

  or:

  "The SIM card that you have currently installed in the phone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert another card from a supported carrier SIM or ask this iPhone be unlocked by your operator. Please contact Apple for more information. »

  My carrier is Verizon and I replaced the SIM card on my return from Costa Rica end of April despite the fact that the card is unlocked and good, in theory, for international travel,

  Before you activate the phone is locked and I can't access applications like camera, that, when I travel, I need over the phone.

  Apple says call Verizon. Verizon said, you guessed it, call Apple.

  When I return to the States, everything works fine. I thought that the replacement of a SIM card would do the trick, so you can imagine my dismay when the activation warning came after I took the phone off airplane mode after I landed in Dublin and the activation warning came new.

  What is going on?

  kennypg wrote:

  iPhone 6

  Network: Verizon

  iOS 9.3.3

  Twice now, once in Costa Rica in April and, more recently, in Ireland, while that phone overseas warning reads as follows:

  "your iPhone could not be activated because the activation server is not reachable. Try to connect your phone to the iPhone to activate it, or try again in a few minutes. If the problem persists contact Apple Support to Apple.com/support. »

  or:

  "The SIM card that you have currently installed in the phone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert another card from a supported carrier SIM or ask this iPhone be unlocked by your operator. Please contact Apple for more information. »

  My carrier is Verizon and I replaced the SIM card on my return from Costa Rica end of April despite the fact that the card is unlocked and good, in theory, for international travel,

  Before you activate the phone is locked and I can't access applications like camera, that, when I travel, I need over the phone.

  Apple says call Verizon. Verizon said, you guessed it, call Apple.

  When I return to the States, everything works fine. I thought that the replacement of a SIM card would do the trick, so you can imagine my dismay when the activation warning came after I took the phone off airplane mode after I landed in Dublin and the activation warning came new.

  What is going on?

  I think it's a problem with Verizon.

  Our company is on AT & T - and our lawyer have travel all over the world, Africa, London, South East Asia and they have never complained to me than before.

• SIM card is not supported in the activation

  I have a question about activating my iPhone with a different SIM card. I have an unlocked iPhone and I tried to use another (of another carrier) SIM card with it. However, the phone will not turn on and I got an error message indicating that the SIM card is not supported by the initial activation and it isn't a hardware problem. He advised me to call my carrier. So I called my operator and the customer support agent has confirmed that my iPhone is indeed open. Now I'm really confused as to why the other carrier's SIM card is not supported. All SIM cards I've tried with my current provider works with my iPhone. All other SIM cards from other telecommunications companies does not work (I tried 3 others).

  Then the phone is not unlocked. Have you asked an unlock of your carrier and they gave him? If Yes, do restore you the phone to factory with iTunes and receive a "congratulations, your phone is now unlocked" message? If this isn't the case, then the unlock code is not complete. You must restore the device with iTunes at the factory, not a backup. When you get the message "Congratulations", you can restore your backup.

• Calibration error SMU-4141 niDCpower version 1.8, "calibration function is not supported by the device."

  Dear Sir.

  Nice to meet you.

  When I run the SMU-4141 "Adjust voltage Leve.vi niDCPower Cal" calibration function niDCpower version 1.8.

  It shows an error "function of calibration is not supported by the device." (false cae)

  But if I run the calibration function SMU-4141 "niDCPower Cal Adjust voltage Measurement.vi", (real deal)

  It will work.

  See attachments.

  My equipment list:

  Windows XP SP3

  LabVIEW 2011

  niDMM 3.0.5

  niDCpower 1.8

  PXI-1073 case with 2 cards.

  SLOT2: SMU-4141

  slot6: PXI-4071

  Could someone tell me the solution?

  Hi Peter,.

  The calibration process indicates that the call of the function of voltage adjust NI - DCPower Cal calibrates both the output level of the device as well as the ability to measure of the device.  It is even for the Cal of NOR-DCPower function adjust a current measurement.

  You must perform a calibration automatic on the device prior to the initial audit of the device, before the adjustment process and before the final verification process.

  I'm not sure I understand your question very well.  Please let me know if I have not responded sufficiently.

• recovery disk will not load error message pc not supported by the system recovery disk.

  had a virus that has taken possession of my PC and wanted the money order to the for free, so I install the recovery disk and chosen in advance and restored the pc at the time, he removed the hold and the system worked very well for a few days. then the system kept to self-extinguish. tried loanding the recovery disc and gave me the message pc not supported by the recovery disc, and now when start received bios award phoenix instead of the hp logo.

  attempted to run antivirus software but before he could finish short scan the pc shuts off I tried in safe mode and the same situation. I downloaded several antivirus programs, but it would still be closed the pc. I tried to install the recovery disk, and it gave me an error message pc not supported by the system recovery disk. now when I start up instead of the blue screen with HP logo, I get a bios award phoenix and other information that I can't copy down it goes too fast. Since I couldn't get rid of the virus, he took to a pc using store, they have removed the virus and loading of operating system vista, problem is I had the word and excel. Now, I can not get my desktop to factory oem computer. I really need my word that I have all my passwords for the accounts listed, I saved them to analyze the drive, but now I have not any other readers like drive j. Any suggestion on how to solve the problem, so I can load the recovery disc.

  Thank you very much

  Frenchquarter, welcome to the forum.

  I suggest that you download and install OpenOffice.  It is FREE and is open to all documents created in MS Office.  If it doesn't, at least it costs you nothing to try.

  I used OpenOffice for years.  Believe me when I say that he will do everything that will make MS Office and in some cases, the better.  At least, you will have to use in the future and you'll be amazed to see how they can do it for FREE.

  Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.