"Hang on" to restart software updates

Similar Questions

• Older A1138 Office do not restart after software update?

  I have worked on an old Mac Office since last night, think that the owner said it is a model of A1138, do not see anything in the associated model anywhere on the unit. The OSX Snow Leopard loaded very well so I ran the software update, but after that he showed that is was downloaded and restarts, it seems being stuck at this time, should I shut down and restart or how much time should I wait please?

  Sorry to not give more details. Guy brought this machine for me yesterday. He said his tenant that moved did not have to take this very old and heavy machine for him, then the tenant given to him. The owner however gave him the unit without the disc hard OSX but hard left 2 discs in there for him. So, I loaded 10.6.3 original CD-ROM from Apple on this topic. I'm trying to upgrade from 6.3 to 6.8, but after he showed that the updates have been downloaded and restarts, it seems to be stuck at this time here with just the 'outer space and stars' screen purple color, should I shut down and restart or how much time should I wait please?

• BlackBerry Z10 Z10 "Please wait while your device is the software update and restart"

  Sorry if this question has been asked elsewhere but I searched and could not find an answer the applies to my particular situation.

  I have a Z10 on Bell who got an automatic update this morning (I have no note of my operating system version number or the version that I was updating to) and the phone is locked to the prompt "Please wait while your device is the software update and restart."  Update messages said it would take a lot of time and that I should connect my phone if it was less than 20% of battery.

  The Bell's Web site indicates that the version of the software is 10.3.2.2168 and the latest version of the OS is 10.3.2.2252.  I don't know how many times this site is updated, but I guess that's the version that I am trying to update?

  (http://support.bell.ca/Mobility/Smartphones_and_mobile_internet/Operating-Systems?alias=BlackBerry-Z...)

  The phone is not fixed... I can see messages turn on the lock screen and interact with the phone to get a glimpse of these messages, but if I try to unlock the phone, the message block appears above any function, I tried to launch (whether a text message, the camera, an email, etc) and I can't interact with the phone at that time otherwise than to lock again and open the lock screen up.

  At the time wherever I drag, the prompt.

  The prompt on the phone for about 6 hours now.  The battery was full this morning and had exhausted 70%, but I've since plugged.

  I have not tried a batt pull because I'm afraid of the consequences of this action after the launch of the update.

  Everyone knows this and had the phoen back? I know that 6 hours is well past any reasonable wait times in my books and was strongly tempted to restart the device... but is there here experts who recommended that I continue to wait?

  I forgot to mention that the power button was still working to give the ability to power off the unit.

  In the end, I couldn't wait any longer.  I put off the device "no risk" with the power button, rather than using the battery pull method.  I turned on the camera back later and the blackberry logo appeared.  The screen faded faded black and no lights appeared on the phone.

  I could hit to swipe down to get the blackberry logo to return to the screen, but no startup loading progress screen never wouldn't come.

  I could never get to the home screen, but the phone was actually 'ON' below.  I could call the phone and it should sound, but there is no visual indication that the phone was working and there was no way to respond.  Sliding down to unlock simply revealed the word "blackberry" in the middle of the screen.

  I did a Batt pull and this time, the logo appeared as before, but disappeared forever... and then the progress of boot screen appear.

  The words 'from 10 Blackberry OS' were visible on the bottom and rotate it beween this and "install updates".

  Start-up took a LOT of time (15-20 minutes?) but after that, everything was fine.

  Displayed software update version information and it is indeed updated to 10.3.2.2168.

• Windows Update crashes to install malicious software update 20 of 23

  I was working on a computer, Windows XP Home Edition for a friend who was infected malware and had not been turned on since December.  I removed 135 malware and then decided to do the Windows updates.  Initially, he could get an IP address even when I put a static... I did some research and followed the instructions to recover from deformation of Winsock2.   Then I got on the Internet to make the updates of Windows.

  It hung for more than 3 hours on software update 20 malicious 23... I didn't write any extra info - sorry.  I said to cancel updates and went back to bed. 4 hours later he said always Cancel updated so I hard booted the computer.  I couldn't bring up the Task Manager, nothing would happen.

  Now when you click on a user, it hangs on loading personal settings or it go to the desktop, but you cannot open Internet Explorer or run programs.  You can click on start running, but if you type a command (cmd, regedit, msconfig) and click OK nothing happens.  If you try to restart in Mode safe mode using F8, and then select Safe Mode it will get as many load windowss\system32\drivers\agp440.sys, then he tells you the computer wasn't shutdown correctly and ask you to select the Mode.  I tried the Safe Mode, Safe Mode with network, Safe Mode command prompt, and I still can't mode without failure.   I also tried the last good known Configuration and that doesn't work anymore.

  Finally I put a Windows XP Home CD into the CD player and I got it to boot from the CD Rom it says its inspection system for quite a long time and then it asks you to insert the Windows XP Home Service Pack 1 disc (that's all I had) CD and press.  I hit enter and I'm in a loop.

  I can also do a start, stop, or restart, it just sits there.  I have to restart from the CPU.

  Any ideas where I'm going from here?

  I was working on a Windows XP Home computer for a friend who was malware infected had been turned on [no not updated] since December...

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need help, please start a new thread in this forum:

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/threads

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Unable to control upgrade: an error occurred when checking for a software update, and the only option is to cancel or retry...

  I bought this iPhone 6 + about 4 weeks ago, today, I saw that there was an iOS updated 9.3.3. I was able to update my iPhone to work 5 sec, but not my iPhone6 +. I don't have a phone to jailbreak and current iOS is 9.3.2.  I googled the question and I tried these:

  1. You can try to update your software via iTunes. Your software update may fix this problem.

  2 settings > Wi - Fi and turn off Wi - Fi, and then click New.

  3. restart your iOS device.

  4 reset network by tapping settings settings > general > reset > reset network settings.

  5. change your DNS settings. To do this, simply tap Settings > Wi - Fi, then tap the blue arrow next to your existing Wi - Fi network. Press the 'DNS' field and enter the DNS servers; 8.8.8.8, 8.8.4.4 (Google Public DNS). After that, try a software update.

  I tried these that none worked.

  Thanks for the help in advance!

  Kimlynusa

  Kimlynusa wrote:

  I was able to update my iPhone to work 5 sec, but not my iPhone6 +.

  Why were you unable to update the iPhone 6 +? What happens when you try? You receive an error? If Yes, what is the exact text of the error?

• Air iPad does not connect to wifi. Network settings reset did not help. Unable to connect to the internet to do the software update.

  I can't connect my wifi iPad air. I tried;

  Reboot & force restart

  Reset network settings

  Connect the iPad to my Mac.

  I can't do a software update to 9.3.2 (without wifi). Seen on another thread to remove this update under settings > storage management. Tried, did not help. When I try to check the updates, I get this message "an error occurred while checking for a software update".

  Something is blocking your access to the update from Apple servers. Update iOS has never worked in this place before? Have you tried to use iTunes to update to iOS?

• Unable to connect to the software update server (127.0.0.1)

  I'm under El Capitan 10.14.4

  I'm unable to view or download from the App store apple updates. Everything else in the app store works fine except the updates and the updates, I get 3rd party updates, but nothing from apple. If I click on updates at the top of the app store icon I get the following error

  

  Troubleshooting steps I went through far

  • I restarted my mac a few times
  • I did some research on Google and messages more speak of iworm, fortunately I could find no trace of an infection by the worm, I scanned my machine using Sphos and ClamXav and haven't found anything relating to iWorm. I am also unable to find all the files, he leaves behind him, so I think I'm safe in this regard.
  • I checked the hosts file and there are no entries that should not be there, hosts file is copied below.

  # Database host

  #

  localhost # is used to configure the loopback interface

  # When the system boots.  Do not change this entry.

  ##

  127.0.0.1 localhost

  255.255.255.255 broadcasthost

  : 1 localhost

  • The /var/log/install.log which appear relevant lines are;

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: Scan for pid 435 client (/ System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated)

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: out of time scan = 0.2

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: error in scan: error Domain = NSURLErrorDomain Code =-1004 'unable to connect to the software update server (127.0.0.1)." UserInfo = {NSErrorFailingURLKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, SUCatalogFetchOverrideURLString =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, NSLocalizedRecoverySuggestion = check that your network connection is working normally.} {If there is no problems with your connection, contact your network administrator for assistance., NSLocalizedDescription = can connect to the software update server (127.0.0.1)., SUErrorRelatedCode = SUErrorCodeScanCatalogNotFound, SUErrorUpdateServerName = 127.0.0.1, NSErrorFailingURLStringKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, _kCFStreamErrorDomainKey = 1, _kCFStreamErrorCodeKey = 61}

  May 26 09:44:02 macbook-pro softwareupdated [435]: Scan received the error unable to connect to the software update server (127.0.0.1).

  May 26 09:44:02 macbook-pro softwareupdated [435]: updates marked ramps

  • I can ping swscan.apple.com and she is resolved to 17.164.1.22 which is the same IP that also resolves the mac next to me (which gets the update)
  • I cannot telnet on port 443 to swscan.apple.com and it connects.
  • I have a mac in yosemite next to me who can see the updates so I suspect that doesn't pose any problems with the service itself rather something on why machine.
  • I started in safe mode, and while in safe mode, I get the same error.

  I am at a complete loss what to do next short of wiping and restore from a time machine backup, can anyone help please

  You can try to disable the Sophos websheild and ClamXav if she has one. Even better would be to uninstall both and test.

  FWIW, it is never a good idea to have 2 av programs installed.

• Apple software update problems

  I used the software update on El Capitan.

  The machine is a MacBook Pro 13 "mid-2012 i5 2.5 Ghz 16 GB of RAM

  There were a couple of updates (iTunes and a few OS updates) so I clicked on update. It prompted me to restart

  He began to be updated, and then fell asleep. When I came back it had frozen.

  Now, when I turn the Mac on I get to the login screen, then it crashes just on a thin gray about 65 percent progress bar. It will stay like that for an hour without movement. This is where it had frozen before

  I tried to enter the mode safe mode with the UPDATE but nothing happens, it just goes to the regular login screen.

  There is no error message and I can not connect

  I don't want to erase my entire BONE because of a problem with iTunes update

  Any ideas?

  Figured it out

  When he went to sleep to the off airport

  Have plugged in ethernet and update took

  Another Apple not useless error message

• If my software update of the Appstore stops to say 1.3 GB of 6.4 GB due to network etc problem it back once again to 1.3 GB rear or all the way from scratch

  If my software update of the Appstore stops to say 1.3 GB of 6.4 GB due to network etc problem it back once again to 1.3 GB rear or all the way from scratch.

  Hello Anshul230499,

  Thank you for using communities of Apple Support.

  If a download was interrupted in the Mac App Store, then whenever you have new Internet download should then restart.

  If a download application is interrupted

  Once an Internet connection is restored, your purchased downloads should restart automatically. The Mac App Store may warn you that there is a problem with the download and ask if you want to restart downloads. Confirming will restart all pending downloads.

  Download time may vary according to the size of the file and the speed of your Internet connection. See this article on purchases made on iTunes Store for more information on the time to download large files.

  Troubleshooting the Mac App Store

  Take care.

• The Apple software update server could not be found. Check your Internet settings and try again.

  Today, I ran Apple Software Update, which offers a v2.1.4 update and installed. Then, she offered a v2.2 update, which I also installed. Check new updates, I received this error message: 'the Apple software update server is not found. Check your Internet settings and try again. »

  My laptop computer that runs Microsoft Windows 7 Home Premium 64-bit.

  I read the other threads on this problem and tried Windows updates and restarting my PC. I had iTunes installed, but uninstalled it months ago. If I had installed iTunes, I would try the method here: Remove and reinstall iTunes and the components of the software for Windows 7 and later versions - Apple Support .

  I don't want Windows 10 and goes through other threads, upgrade to would not necessarily solve this problem.

  Having received no response, I uninstalled all Apple software and then installed QuickTime, which I use occasionally. The Apple software update is back to version 2.1.3.

• Apple Software Update - 'server not found '.

  Hi, hope someone can help please?

  Apple software update suggested that I update (Apple Software Update) to a newer version (which turns out be to 2.2)

  I did install seemed to go OK, then when Apple Software Update still ran (and every time since then) it comes up with an error message: 'the Apple software update server is not found. Check your internet settings and try again. »

  So my network / internet and everything else on my machine works fine, but for some reason, the new version of the application to update from apple is spit it is fake and cannot access the internet!

  I rebooted my machine, fixed the application through the Control Panel, check the firewall settings and it off all together, but nothing helps. Could not find anywhere on the apple software download site as to where I can re - download / install either, or I which would have given it a go.

  Someone at - it suggestions how I can solve this problem? It's really annoying!

  If this isn't the case, anyone knows how to go back to the previous version?

  My PC running Win 7 Professional 64-bit

  Thanks in advance to all

  Psyman

  Here are a few things you should try:

  1. update your computer

  2. restart your computer

  3. update to Windows 10

  4 remove iTunes (or any software you are trying to update) and then reinstall it from the iTunes Web site

• software update of the iWatch

  I waited hours for the software update. Now, he says, "check". Is it 'stuck '? It will never end?

  Hello

  Try these steps, who worked for others who encountered problems at the latest to step "review". However, do not interrupt your iPhone or watch if the process has already reached the point "Setup."

  On your iPhone, close the watch application as well as all other open applications (press twice on the Home button, drag up on each of the app previews).

  Remove the magazine from your watch and restarting both devices, both turning off and then restarting your iPhone first.

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off.

  -To reactivate: press and hold the side button until you see the Apple logo.

  Replace your watch on the charger, then try to update again:

  Update the software on your Apple Watch - Apple Support

• Why can't I launch software update?

  I am confused and don't know what else to do.  I can not get the updates installed.

  Here are the steps I followed

  -Click the black Apple icon in the upper left corner of the screen.

  -Click on "about this Mac",

  -Click "software updates".

  -Select Update

  Result: He begins to calculate the time and at the end of a few seconds nothing else happens. This happens when I select an update at a time or all at once.

  Things I've tried.

  (1) close all programs and restart the Mac.

  (2) restart the Mac by pressing the 4 following keys [Option], [order], [P], [R] and wait for the Bell to ring twice.

  (3) Ran disk utility and verified: result was "no error".

  (4) Ran disk utility and verified permissions: result was "no found permissions."

  I would be grateful to any direction.

  Have you tried to do it from the app store? Lancement launch of the app store, and then select the Store menu and verify that you see 'View my account ' and make sure that it contains your apple ID. Then click the icon for updates at the top of the screen. Don't you see the update of the system of exploitation that are listed there? If so, click on the button to update and see if it works. If you do not see the update, return to the Store menu and select "logout". Return to the menu, then connect you using your Apple ID. See if that makes a difference. Good luck!

• Not able to install software-update

  Hello

  After that my Macbook Pro (2008) is crushed at the time, the original version of OS X was installed (10.5.8). To upgrade to El Capitan, I discovered that first of all, I had to buy the update of Snow Leopard, so I installed yesterday to version 10.6.3. But I still have to go up to at least 10.6.6 to install El Capitan, so I tried the software update.

  Now the problem: I can do the software update, and then he said to restart my computer. If I click on reboot and the system closes, but then maintains the display of the original with the purple cloud and stars background, but it does not continue. I don't see any dock or anything, just the bottom. I have the same problem if I just shut up and want to manually restart (it is not closing completely, just shows the background).

  I can restart and then clicking CTRL cmd + button on / off, but I don't see no update software (always 10.6.3). If I don't do the software update and restart normally without the update, it is not a problem to restart, which normally. Looks like something is wrong, when it wants to install updates...?

  Can anyone help please?

  Nicely,

  Julie

  Mac OS X 10.6.8 Combo Update v1.1

  Download this file and run it.

• The HP software update is still my printer unable to talk to my PC with USB cable or wireless. Nightmare.

  I tried to do what I thought, it was a systematic HP software update on my printer, which has been very well. The software appears to install correctly, but then I could not connect wireless or even when I plugged a USB cable at the back. I restarted my computer and my printer several times. I retried the installation several time steps. Two hours later, I'm stuck, and I see no way to get any help from HP. At this point, I think seriously just junking my printer and switch to another brand that has his act together. Can anyone help? Of course can't do HP.

  Hello

  Normally, I will not let any product for my machines automatically update. Anyway, my suggestion: using Windows restore to restore the machine back to the point before the update.

  I hope this helps.