hang the second monitor for slimline t3600

Similar Questions

• How can I preview my photo on the second monitor fullscreen? I mean I want to live broadcast the result without saving the file

  I want to see the result of my editing on the second monitor for broadcasting

  Click on the new window to make it active and go view > screen mode > full screen or press the f button a couple of times.

  [EDIT]  CTRL 0 will make the zoom image to fit the screen.  CTRL Alt 0 will make the image zoom to actual pixels size.  Note that these are zeros, not the letter O.

• iMac 27 "with the second monitor boots black with cursor

  I can't seem to find another discussion altogether as my problem starting special 'black screen ':

  New iMac 27 "retina 5K (end of 2015) running OS X El Capitan 10.11.3 with second monitor Samsung connected by Mini DP - DVI.  When starting, the two screens are displayed in black, but the cursor is available and can be moved.

  I have to make a hard stop and disconnect the second monitor to start at the login screen. Then I can reconnect the monitor and everything works.

  Any suggestions for a fix?

  So, I spent some time with Apple customer support. Several of the standard troubleshooting for problems of mystery, they came to the conclusion that there was an incompatibility of driver with the Samsung monitor at startup which is mucking things up, and I just have to accept starting with the second disconnected monitor then plug it in again after a successful login.

  Samsung does not write the monitor for Mac drivers (for some reason any), that's why the customer support figures that there is a hangup at startup. But why OS X recognize the monitor and run fine otherwise? Why only hang at boot time? And why my Mac Book Pro 2007 running the same version of El Capitan boot fine with the connected monitor? It has something to do with the Thunderbolt/mini-DP-to-DVI connection? I don't know, and I guess that Apple's Support is not either.

  I fell on a hack, which is as follows:

  1. start with the second monitor connected

  2. in the "black screen with cursor" hold the power button quite long to put the computer to sleep

  3 wake up the computer with the keyboard or trackpad or other

  4 and now the login screen will appear.

  5 log in as usual.

  6.

  I hope this helps someone. One day I'll get a more compatible monitor and it will not be a Samsung.

  They make nice dish, however.

• Satellite 1130-Z31: impossible to get 1600 x 900 on the second monitor

  I have a Toshiba Satellite 1130-Z31 (an old, but everything works well).

  Now, I have attached a second monitor with a native resolution of 1600 x 900 pixels.

  I put the second screen resolution to 1600 x 900, it is accepted.

  However, the image on the second monitor is ugly, and the external monitor´s what OSD says it gets 1440 x 900 pixel laptop computer signals.

  It seems that Toshiba sends an image with a lower resolution on the whole.

  I installed the latest graphic driver - no change.

  Or would it be a problem with a bad quality VGA cable or almost?

  Any ideas?

  Thank you
  Turtle

  Hello

  Unfortunately, I wasn't able to find the info which resolutions are supported for external screens, but if you can't get 1600 x 900 pixels which means that this resolution is not supported by the graphics card.

  What video port are you using? VGA 15 pins port maybe?

• Scrolling Web page very slow on the second monitor

  I have two monitors. When I move the window of firefox for the second monitor - scrolling of web pages is very slow. Sometimes he computer freeze (I can't move the mouse cursor).
  I checked the other applications such as MS Word, Chrome.
  This problem is only firefox problem.

  This problem apears when the part of the firefox window shows on the second monitor (or even 50 pixels)

  Hey, I had the same problem and I solved it:
  1. - in the Firefox menu, display the Tools/Options.
  2. - unselect the checkbox "use hardware acceleration when available.
  This should work better now. Apparently the hardware acceleration makes the problems only when the windows of Firefox appears in a non-primary screen (don't know why). I suppose you know, but if you want to change your primary monitor you can do it from settings (right click on the desktop, then properties).
  Good luck!

• HP 15-r011dx noteboo9: no audio when with the second monitor attached and Extend mode, duplicate or second screen only

  When I attached a second monitor via a HDMI cable and try to use the duplicate, extend or second screen display modes only, I can get the video to view and run but I get no audio unless I put the laptop display settings to p / only mode.  I really want to use the second screen for PowerPoint/Presenter and play a video (with sound).  Even if I try to play a video on YouTube, I can't get audio only mode p / screen.  Any help would be greatly appreciated.  Thank you.

  Hello

  Please disable the HDMI to force audio to the laptop or use different such as VGA or DVI conection. To hell with its HDMI, please click right "speaker" icon > playback devices > right click and disable the HDMI sound.

  Kind regards.

• Problem with the icons on the second monitor

  Original title: I had the image of the desktop without icons, when I added another monitor, but can not get the screen of the laptop to display on the screen 2 real. I have enable VGA on media center edition XP

  I had the image of the desktop without icons, when I added another monitor, but can not get the screen of the laptop to display on the screen 2 real. I activated the VGA on the media center XP edition

  Hello

  If I understand the question, you have a problem with icons on the second monitor.

  Please let me know if this is not correct. You have reached the right forum for your question. We are here to help solve your problem and guide you in the right direction.

  I suggest you try the procedure described in the article and see if it helps.

  How to configure and use multiple monitors in Windows XP
  http://support.Microsoft.com/kb/307873

  You can check the link for more information:

  Setting up dual monitor: two screens are better than one
  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=jiVGYS2SKfo

  Please let me know if this is not correct. You have reached the right forum for your question. We are here to help solve your problem and guide you in the right direction.

• No video on the second monitor (DLP projector) in PowerPoint 2003 presentation mode.

  When you use PowerPoint 2003 in presenter view, videos will not play on the second monitor which is a DLP projector. Video plays and produces the sound, but no picture. Videos play fine in clone mode. Using Dell Latitude D820 and windows XP pro

  For questions of PowerPoint:

   

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-AU/Office/default.aspx?tab=2#tab=5

  PowerPoint Help Forums at the link above.

  They will help you with your questions PowerPoint when repost you in the Office Forums above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Vista don't forget display settings; move the second monitor from top right.

  Windows Vista is often (not always) forgotten my display settings for my external monitor.

  I have a Dell XPS M1530 laptop with a NVIDIA GeForce 8600 M GT graphics card.  The laptop is running Vista Home Premium SP2 with all updates applied.  I have a Samsung LCD monitor mounted on the wall above the laptop screen that I use as a second monitor (driven by the output of the laptop).

  I updated the display settings so that my second screen is located above my main monitor. My problem is that Vista often forget this parameter after the standby or hibernation, and returns the value by default display settings of 'second monitor is to the right of the primary monitor'.  This means that I often walk in the display settings to do the right thing (pardon the pun).

  I've seen other messages to try to use 'View to connect' in the settings of Windows Mobile (win - X).  However this option only supports a second monitor is located on the left or the right of the main screen - not on it.

  Any suggestions before I have eventually give up and drill several holes in the wall to mount the external monitor to the right of the screen of my laptop?

  Thank you.

  In my case out of sleep the primary monitor (laptop) is off (still asleep) while the second monitor is on but the resolution is that the screen of the laptop and he took the position of the main monitor. I push the "fn" + 'f4' key to switch between monitors, laptop monitor turns on but the secondary display stands. Another pressure on the keys cause the laptop monitor to be shared and the secondary monitor is now on, that's what toggle keys do. On the third time that the keys have pushed the two monitors came the resolutions they were Setup.

  Try using the ToggleKeys. On some laptops the 'f' key to toggle is "" f5"key. My 'f4' key has the image of two monitors.

  I hope I could help

• U2414H, Dual, laptop, Windows 10, Nvidia GTX 960 M, no STDS to the second monitor?

  Hi all

  I hope that I have included all relevant information in the present, but ask if I missed something. I bought two of the screens U2414H and a Windows 10 laptop computer powered by GTX 960 M with HDMI and Mini DP ports. My goal was to be able to the Garland of the whole U2414H screens so I could use my laptop out and about, and when connection back to the monitors of would have to plug in a cable and get two screens. In theory, but...

  I followed the instructions and using two Mini-DP to DP cables, connected the mini laptop RFP RFP on the first screen. DP on this same screen highlights Mini DP on the second monitor. I activated the DisplayPort 1.2 on both of these screens. I can't get any signal on the second monitor, it boils down to the power saving mode.

  Otherwise, I decided I would try using two cables and ditch the idea of DP STD I can at least use the two screens. So I have laptop HDMI to a screen and the MiniDP to another, and therefore, that alone will never work at a time. Individually, they work very well, both with HDMI or DP. But the two connection fails every time. When I tried to connect a display of alternative supporting HDMI as the second, which works very well.

  So I had an autour reading and it seems that it is common to have problems of connectivity to these screens. This brings me well on my two questions:

  (1) is there something that would work?

  (2) assuming that there is nothing that works, Dell can swap these screens for two that will achieve what I need?

  Thank you

  Dave

  In MST, DP 1.2 should be turned off (disabled) on the second monitor.

  Laptop AMD on--> U2414H CDM to cable DP--> DP U2414H #1 in (DP 1.2 enabled) (Port #3 in the image)

  
  #1 U2414H (Port #5 in photo) DP--> DP U2414H CDM cable--> 2 # U2414H CDM in (DP 1.2 disabled) (Port #4 in photo)

  When you use only no STDS, is the lid of the laptop open all trying to run two monitors of U2414H? This laptop can even run three screens, laptop LCD + 1 # U2414H + 2 # U2414H?

• To open a Pdf file on the second monitor

  Original title: two monitors and open files
  Hello!!

  I have now two monitors on my desktop and I want to know how I can open a PDF on the second monitor, and keep all my PDFs on the first monitor? I want to simply click in the file - on the first monitor - and the file opens automatically on the second monitor.

  Thank you

  M. Vilela

  Hello

  Try these steps and check if you are able to open the PDF file on the second monitor...
  a. open a PDF file. Now, UN-maximize the file.
  (b) move it to the other monitor.
  c. now, close the document without maximizing it on the new monitor.

  d. now attempt to open a PDF file.
  e. it should open on the second monitor.
  f. maximise, close the vial.
  g. now opens a new PDF on the new monitor, and it will be maximized when opened.

  Adobe will remember whether or not a document has been expanded and open PDF one another in the same way, but it will update the monitor to use when a document is closed so that not maximized.

  View the query in the adobe forum for help
  http://forums.Adobe.com/index.jspa

• Add the Second monitor - XPS 8100

  I have a XPS8100 (June 2012) with a Radeon 7570 video card and two monitors Gateway TFT1980PS + (2006 Vintage). I have a problem connecting to the second monitor. I was told that the machine runs two on purchase. Current configuration includes primary monitor in the slot of DVI with an adapter for a VGA splitter cable. When I attach the second monitor splitter cable I get the identical to the new monitor signal but the machine does not recognize a second monitor.  Also if I connect the second VGA/SVGA cable directly on the HDMI output is there nothing more.

  Question: What is the good setup or adapter needs to use two VGA monitors on this machine?

  As you note, you're right, that my machine is a 8500 with map 7570. (woman machine was a 8100).

  The card into the slot (probably the 7570) has the output DVI and my current monitor works through this port.  Now that I look closer, I see the HDMI port on the card. I'll have to find an adapter for the second monitor. At this point I feel quite stupid, like the location of the machine was that I couldn't really see the back that well and did not yet see the HDMI port on the card. Seeing this a few days ago would have save me embarrassment, you and your great tech team some time.

  Thank you

• My computer does not detect the second monitor

  I just bought another monitor for my PC. My first monitor is plugged into one of the two VGA connectors at the back of the computer, and my second monitor is plugged into the second slot VGA. However, when I try to detect the second monitor does not work, and he thinks that a monitor is connected. Thanks for any help!

  Hello

  Power Off the Computer and then plug in the monitor.

  How to set up dual monitors in Windows 7
  http://www.online-tech-tips.com/Windows-7/How-to-Setup-dual-monitors-in-Windows-7/

  Two screens are better than one
  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  Tutorial: How to set up two monitors (Windows) - video
  http://www.YouTube.com/watch?v=YFCpaAs5s3c

  How to set up multiple monitors
  http://www.PCWorld.com/article/157672/how_to_set_up_multiple_monitors.html

  ==================================

  You may need to update your display and video driver

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
  for the drivers Microsoft hide - updated those without drain in their names. (Also updated
  the BIOS and chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
  Then, get new ones manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can I get Windows Photo Viewer (7) to play his slide show on the second monitor?

  I attach a second monitor to my laptop with an RGB cable.  I would like to be able to play the slide show and screen saver of photo on my extra monitor instead of on the little tiny screen on the laptop.  Is there a way of photo windows 7 Configuration Viewer to do?

  Hello

  Thanks for posting your query in Microsoft Community.

  From the description of the problem, you are not able to play slide on the second monitor photo viewer. I'll be happy to help you on this question.

  I suggest you try the steps from the following link on how to move the windows or the programs between the different monitors.

  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  I hope this helps! Let us know if you need help with Windows in the future. We will be happy to help.

• cursor stuttering on the second monitor

  I am on Windows 8.1 and using 2 monitors in extended mode. I have problem when you move the slider on the second screen, it is stuttering, also facing this problem on the main screen for a while when loading web pages, but don't know if same thing causing this problem however. When I restart my computer cursor moves smoothly on the second monitor as well for quite a while. Have not paid attention to what I do on my computer when stuttering starts. All I do is play games online, watch videos and surf the web.

  Before I had the chance to do the things recommended you to do it, I changed the resolution on my second screen to adjust it a bit and I didn't any stuttering since. But if the problem persists I'll try safe mode and clean start. Thank you!

  PS. I also discovered that the problem occurred when I was loading of web pages or watch videos on the web.