HARD drive and upgrade of RAM for Satellite A200 1AE

Similar Questions

• Need driver for display for Satellite A200-1AE

  Hi all

  I'm looking for driver for Satellite A200 1AE disply.
  The card on this computer is the NVIDIA GeForce Go 7300 card.
  No sign of this model in the Toshiba Web site for drivers and Nvidia didn't send me to the Web from Toshiba site.

  What can I do?

  Help, please!

  Voodoo

  The laptop belongs to the PSAECE series
  I checked the page European driver of Toshiba and the display driver is available.

  I would recommend so visit this site for the compatible driver.

  Man Bye

• I just have to install a new hard drive and Vista on my Toshiba Satellite pro computer laptop I gave up and damage the hard drive.

  I can't set up a broadband connection using the cable or wireless such that it does not recognize either. Also, the font is huge and I can't find anywhere to reduce only expand. I also have to install a Toshiba installation disc?

  If the installation disc includes the drivers for your motherboard, display and Wi - Fi then yes do you.

  You can also find drivers as follows. Go to the Toshiba support website and search for Windows Vista drivers for your specific model number.

  Toshiba support: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp

  If there are Windows Vista drivers can download to a folder on your hard drive and install all of them, starting with the card mother/chipset, SATA, USB drivers, Audio, LAN, Etc., and so on.

  Tips for solving common problems: http://windows.microsoft.com/en-US/windows-vista/help/top-solutions

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  J W Stuart: http://www.pagestart.com

• New hard drive and cloning Windows asking for the password and end the session

  Hi all

  Need help please. I just bought a Cavior of WD 1 TB hard drive. I have used Norton Ghost to clone my old hard drive again. Then I removed the old hard drive and another to start the system. Currently, Windows XP was asked to enter the password (in my old drive hard, there is no password entry required). When I press ENTER, the windows log.

  Also, I tried to log in after you have set a password using ERD Commander (locksmith). I get the same result, that is to say Windows log off after entering the password.

  I am at a loss on how to proceed from here. I do not have the CD Windows XP that I bought this computer a few years and did not remember receiving the Windows XP CD. I don't have the product key which is glued on the computer case.

  Help, please. I have to activate Windows again?

  Ghost allows you to create a backup "Image", and then restore the image to the new disk.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Pavilion 15-ab057nr: How can I change for one SSD HARD drive and update my RAM?

  Hi, I would like to change the hard drive of my computer (Pavilion 15-ab057nr) for one ssd and also add another module of RAM. The problem is that I've never opened a laptop before, and I don't know where to start, or what should I do after I opened the computer. I don't know if anyone could help me by giving me a guide on how to perform these upgrades, every little detail would be useful. Thank you.

  Hi @IYMF,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the HP Pavilion Notebook - 15-ab057nr and tried to help you! I looked in your question about upgrading the internal hardware. I understand that you are looking to upgrade your hard drive to a Solid State Drive, as well as adding another module of RAM.

  Here is a link to your Service Manual. You can find the specifications for compatible discs on page 49. Please note that this laptop model doesn't support that type hybrid Solid State Drives.

  Maintenance manual, page 55, there will be a list of the size of RAM supported, but also a guide on the replacement of the RAM. Up to 16 GB of RAM may be supported in a 8GB x 2 configuration.

  On pages 46 to 50 of your maintenance manual, you will find instructions on how to remove the rear panel of the laptop, as well as, instructions on the removal of the original hard drive.

  I also found this Vidéo Guide giving visual aid on the replacement of the hard disk. The model of laptop in the video is not exactly the same as the model that you have, but it can provide assistance, however.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• Upgrade of RAM for Satellite 1900-603

  I want to go to 1 GB of RAM IE extra 512 MB on my laptop P4 Satellite 1900-603, I checked the (additive) manual and it says ' onboard two 200 pins + 2.5V DDR SO-DIMM sockets supporting RAM DDR memory modules. Upgrade 1 GB by two max modules of 512 MB memory.

  I couldn't find the part number on the Toshiba site, so I checked the website of Kingston, which gave me KTT3311/512 or KTT3614/512, I bought KTT3311/512 of this notice.

  Unfortunately, when I come to install the part the second slot is smaller than the original square. That is to say fewer pins.

  The RAM I bought is the part of the original square, but obviously does not fit in the spare slot.

  Could someone tell me what the part number is for the smaller RAM and why this information is not available on the Web from Toshiba website or in the manual, including the additive.

  Hello

  I ve downloaded the manual for Satellite 1900-603 PS192E series and he says the basic soecifications of the memory being used are:
  module SO-DIMM 144-pin
  SDRAM 3,3 volts
  PS-133 (PC - 100 is unusable)
  Capacity of 128 MB, 256 MB, or 512 MB.

  But according to this page:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=6051&ft=m&St=3

  the laptop must manage 200 pin PC2100 (266 MHz) DDR SODIMM memory hmm very strange?  :|

• Upgrade of RAM for Satellite Pro 3400

  Hello

  I own a laptop Satellite Pro 3410, it has pentium celeron 600, 64 MB of ram and 13 '' dstn display. I want to upgrade my ram, somewhere, I read that it can be improved with 256 MB, so that there then 320Mo. My question is now, what I have to use 2 pieces of 128 MB of ram or can I use 1 piece of 256 MB of ram. The point is a friend gave me a 256MB ram for PC laptop (pc-100) toshiba, I put it and it seems to work (win2k showed me the 320Mo compleet), but can it be problems, using this a big RAM?

  I hope you can help

  Katja

  Hello

  I think you mean a Satellite Pro 4310?

  Normally it only uses the modules of memory up to 128 MB. But if your laptop is running with this 256 MB module, there should be no problem.

  Good bye

• Upgrade of RAM for Satellite L300 - PSLB8A

  Can someone help me work on my abilities of the system. Was looking to upgrade to win 7 64 bit and didn't know if my pc is able.
  My system is as follows:

  Processor Processor - Intel (R) 585 @2. 16 GHz
  Memory - 1.00 GB (RAM)
  Graphics Mobile Intel (R) 4 series express chipset family
  Graphics of games - 286 MB total available graphics memory
  Disk hard - 500 GB
  Processor cores - 1

  Running vista 32 bit hp. Performance information printed and it says 64 bit capable. Am confused because I thought that win 7 64 needed 4 GB of ram for optimal performance. If I need to upgrade RAM, anyone knows if I can spend 4 GB in this model or where I can get the relevant information. Having read in the manual of the user on the memory and I'm a little lost. The information reads as follows

  PC2-5300 512 MB, 1 GB, or 2 GB memory
  modules can be installed in two memory locations
  of all the models.

  PC2-6400 512 MB, 1 GB, 2 GB or 4 GB memory
  modules can only be installed in memory of two
  slot slot machines models:
  Mobile Intel® GM45 Express Chipset model
  Model of Mobile Intel® GL40 Express Chipset
  ATI Radeon 3100 graphics card model
  ATI Radeon HD 3200 graphics card model

  Speed and memory size of the system
  depend on the model you have purchased

  Any help would be appreciated

  Can you please post the exact model name and model number?
  I put t know what L300 - PSLB8A - you.

  THIS one perhaps?

• Desktop a6530f Pavilion, new hard drive and upgrade to Windows 7

  I have a desktop Pavilion a6530f with Vista.  My hard drive has been the production of errors, so I bought a new hard drive.  The original hard drive works pretty well as I should be able to create a recovery with a usb flash drive media.  I want to install the new hard drive (Seagate 1 TB SATA 3), and then install Windows 7 upgrade on the new drive.  Will be the ASUS M2N68 - LA / Narra3-GLBE motherboard supports SATA 3 (SATA 2 pilot courses)?  If Yes, where can I get the drivers?  Is there a Web page on the HP site for upgrade to Windows 7 on a new hard drive?  Or I just follow the guests after boot of the Windows 7 upgrade disc and enter the code of Vista product from the label on the side of the PC?

  Here are the specifications of your desktop HP Pavilion a6530f. Based on the specifications, this model shipped from the factory with Windows Vista Home Premium SP1 64-bit installed. This model supports the use of disks SATA 3, however transfer speeds will be limited to the rates for the motherboard SATA 2. No special drivers are required. Seagate 1 TB SATA 3 drive should work fine on this computer, but you may have problems using your HP recovery discs if the new drive is a Format "Advance" AF drive.

  It is unlikely that you will be able to create a recovery media on a USB FlashDrive with this computer. In my view, that this model only supports the creation of recovery DVDs.

  You have a choice of a couple of paths when it comes to the installation of Windows on your computer with a new hard drive installed.

  (1) use your HP Vista recovery disks to install Vista... This may or may not work depending on the new hard drive installed. Then, upgrade to Windows 7 using the upgrade disc and the Windows 7 product key printed on the certificate of authenticity provided with the Windows 7 upgrade disk. (Note: the key of Vista with Windows 7 will not work)

  (2) If you don't mind losing the "value-added" software HP originally installed on the computer, you can install Windows 7 without using Vista installed first. Install Windows 7 using the upgrade disc and the Windows 7 product key printed on the certificate of authenticity provided with the Windows 7 upgrade disk. (Do not enter the key during the installation of the window) (Note: the key of Vista with Windows 7 will not work)

  In both cases just follow the prompts as needed. I suggest to use Windows 7 SP1, because it seems to be more compatible with the new material, including readers of the AF.

  Please see HP - upgrade to Windows 7 customer care using basic upgrade or install Windows 7. Please see HP Forum - how to install Windows 7 without the disc for useful information and download for Windows 7.

  Please send Bravo

• Upgrade of RAM for Satellite Pro S300-11

  Hello
  I have this netbook for two years now and I need to add more memory RAM, it has 2 GB and is capable of having up to 8 GB.
  I went to two local stores to buy a memory stick, but they are not able to find my netbook to their suppliers, so that they have no idea what memory modules could go well with my pc. I know that the installed RAM module is a DDR2 at 800 MHz. So, any module of ram with these specifications should work correctly?
  Another question is if my computer is able to read up to 8 GB or I have to upgrade the BIOS (I have not updated, so I have one pre-installed).
  Thanks for your reply and sorry for my English!
  See you soon!

  Hi manelfera,

  The laptop has Intel GM45 chipset and the chipset supports up to 8 GB of memory. This means that you can install 4 GB module in both memory slots. As you already wrote DDR2 800 MHz is the correct specification.

  Theoretically, each module with this specification will work, but I recommend the purchase of high quality of Kingston for example modules. I have good experiences with this brand :)

  Updating the BIOS is not necessary for the upgrade of RAM so you can keep the current version.

• Upgrade of RAM for Satellite A10-S403D

  Hello

  I have a laptop Satellite A10-s403D, quite old, but still works fine. I would like to add a few more memory (there now 256 MB).
  Could someone advise me as to what type of RAM to use (I'm completely lost with all these formats available)?

  Thank you!

  Hi Roman,

  Please see the link depending on which has the details of the RAM for your laptop.

  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=24882&ft=m&St=3

  Kind regards

• What HARD drive max can I use for Satellite 2410-504

  Hello

  I have a Toshiba 2410-504 P241E the 20 GB drive HARD is almost full, and I would like to buy another larger capacity disc to replace.
  My question is what is the maximum capacity disc and what type of drive this machine will support?

  Note: I have the latest version of the bios installed and the machine is running Win XP pro.

  Concerning

  Bob

  Hello

  I think that the laptop supports an IDE HDD controller that supports only 28-bit LBA as suggested by resident. This means that the controller does support max 128 GB IDE hard drives.

  Since ATA - 6 (Ultra DMA mode 5 or Ultra-ATA100) the 48-bit LBA is supported but I n t think that Sam 2410-504 was equipped with the ATA-6 controller and therefore, it seems that 120 GB (128 GB HARD drive not available) disk HARD is the maximum that could be used.

  See you soon

• Upgrade of RAM for satellite M40X-189

  Hello

  I think the upgrade from my memory of the laptop.

  I wonder if I can use Kingston KTD-INSP5150 / 1 G instead of KTT3311/1 G? They are all two PC2700 200-pin DDR SODIMM 333 MHZ but KTD-INSP5150 / 1 G is mainly used for other laptops.

  Someone sell KTD-INSP5150 / 1 G on good price reasonable but do not know if it is compatible?

  Thank you

  Hi momer79,

  Above all Equium M40x can be upgraded to 2 GB of memory. You need to the MMAR DDR SO-DIMM modules with specification PC2700. You can use up to 1 GB in each of the slots.

  Furthermore, I checked the Web of Kingston site because it has Configurator memory. If you are looking for satellite M40x-189, you will get two compatible memory modules:
  KTT3311A/512 (512 MB SO-DIMM)
  KTT3311A / 1 G (1 GB SO DIMM)

  So in your case I would buy one or two of these modules because they seem to be compatible with your computer satellite phone. ;)

• Upgrade of RAM for Satellite Pro L300-1cz

  Hello!

  I want to upgrade the RAM on a L300-1cz. What I have to buy Toshiba memory or can I use [Kingston Value RAM KVR800D2S5 / 2G | http://www.valueram.com/datasheets/KVR800D2S5_2G.pdf] (standard 256 M X 64 Non - ECC 800 MHz 200 - pin SODIMM Unbuffered (SDRAM DDR2, 1.8V, CL5))

  Best regards...

  Hello

  I think you can use the modules of memory from different manufacturers.
  But you must choose the right with straight plug modules;

  As far as I know the RAM module should support this specification:
  * 800 MHz (PC2-6400) 200 - PIN SODIMM DDR2 *.

  Welcome them

• Need info on RAM for Satellite A200 - 1 M 4

  Help please.

  What RAM do need me for my Satellite A200 - 1 M 4 512 MB upgrade to?
  Thanks for the help!

  Hello

  RAM upgrade to follow RAM modules:
  1 GB-DDR2-667-PA3512U-1M1G

  2 GB DDR2-667-PA3513U-1M2G