HARD drive external 250GB PX1266E - 1 25

When I connect my HARD drive (Toshiba PX1266E - 1 25 250GB external HARD drive) to my computer that has USB 2.0, I get a message that the device could work faster when I connect it to a USB 2.0 port. The fact is that it * is * connected to a usb 2.0 port. It has the same problem on another laptop and another hard disk doesn't have this problem. I tried al my usb connectors

Is anyone have an idea. First of all, it has been installed in front of my (old) computer that has usb 1.1.

Thanks in advance

Hello!

You can try another cable with this external HARD drive?
Ensure that are pluged all cables (power and USB).

For this disc is perhaps also an update of the firmware available. Check it!

Good bye

Tags: Toshiba

Similar Questions

  • PC stopped recognizing 3.5 hard drive external Toshiba

    Hi all

    I have a 3.5/250 GB Toshiba hard drive external. I use Windows XP as my operating system and for some reason, my PC stopped recognizing saying 'USB not recognized '.
    It is supposed to be taken & play and I'm sure that I didn't have a driver, when I installed it.
    If anyone can help or has any suggestions, I would be grateful.

    Thank you

    Malc

    Hallo Malc

    It is possible that you have removed the external device without using the option remove the device safely. Restart the machine and try again.

    Otherwise, you can remove all ports USB device manager and start option to add material on the list. After detection and installation it should work again.

  • HARD drive external (E :) hangs and then said: "Not responding" when trying to backup.)

    Original title: backup on an external hard drive

    I'm trying to back up my files on an "External" hard drive It's me E: drive as the location, but it just hangs up there says "not responding". I tried to do an "Archive" in the "My Documents" folder, I saw files transfer, however all my names of my files are now blue in 'My documents' whatever that means? What drive letter should go a hard drive 'external '? I should be able to click on that drive and see what is on my external hard drive, but it doesn't "not responding"...

    External drive (E :) will not name until you give him one.  It is possible that the disk has not been formatted yet.

    Open disk management (start > run > diskmgmt.msc > OK).
    You will see something like this:

    You will have a line for 'Disk 2' but which shows next to your "disc 1". Please provide ALL information in the "Disk 1" line.

    For example, if you had the image above, the response from you I'm looking for would be:

    Disc 1 - Basic - 186,31 GB - online
    Ghost images (D :) - 93,13 GB NTFS - healthy (active))
    Data backup (E :) - 50,57 Go NTFS - healthy)
    42.61 GB - not assigned

  • Transfer Media Player on a hard drive external?

    I run XP and bought an external hard drive to my music collection.  Is it possible to transfer the Media Player itself on the hard drive external?  I'd rather play on Media Player on those of the drive, that there is none.  Choose a record and that's all that you can play at the same time; No shuffle or several artists in one sitting.

    Any suggestions, anyone?

    There is no need to transfer WMP itself hard disk external, WMP can perfectly handle music on other players.

    In WMP, please press F3 to display add it to the library, make sure that Advanced Options are displayed and add the folder music on the external hard drive in the list. Now, all the music on the hard drive will be added to the WMP library.

  • Unable to transfer data from the laptop hard drive external/pendrive.

    Dear Experts,

    Unable to transfer data from the laptop hard drive external/pendrive.

    Each time that tried to transfer meesage seems to the authorization of the administration.

    Kindly help me to solve the problem.

    Concerning

    Hello

    Follow these steps and check:

    To take ownership of a folder

    a. click on the USB key you want to learnand then click on Properties.

    b. click on the Security tab, click Advanced and then click on the tab owner.

    c. click on change. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    d. click on the name of the person you want to give to the property.

    e. If you want that person to be the owner of the files and subfolders in this folder, select the owner of subcontainers and objects replace check.

    f. click on OK.

  • Finder or by default in the view extended folder on hard drive external

    I'm trying to understand why, when I open an external window of Finder on my hard drive, it always expands to display a specific folder I used months ago. I do not know Finder using the default views and I can't determine how to reset back to the view of the root of the drive.

    Thank you.

    CA

    Hi leftysrevenge!

    I can certainly understand not wanting the Finder of an external drive window to keep opening to a folder that has been used months ago because I wouldn't mine to display that way either.  No worries, there are a few steps here to get the default view has changed on this issue.  Follow these steps here and he should be able to be changed for this external drive:

    Open the Finder, click Display > Display Options > a window will appear to select your display preferences, make your selection here > and if possible use the button "Use as default" to maintain this point of view.

    The "Use as Defaults" button may be grey, if the format of the external drive is not OS X Extended.

    Enjoy your day!

  • Move the copy of pictures on hard drive external

    I am on an iMac plus old (2008), El Capitan running and I want to copy all my pictures and videos in Photos on an external hard drive just in case of death of my office.  Can I do that and still keep my library of photos on my Mac and use it as usual? If so, how do I?

    Thank you

    First, make sure that the drive is formatted as shown in this screenshot:

    Then just drag the module external library of Photos of your folder on the hard drive and let the Finder copy it.

    Do you have a backup in place strategy?  If this isn't the case, you should, because at some point, you will lose the files of your boot drive either by accident or in a car accident.  It's inevitable.  Easier to implement backup system is with Time Machine, which comes with every Mac.  Here's how to set up: use Time Machine to back up or restore your Mac - Apple Support

    With a backup like Time Machine, incremental backups on every hour, you will always have a current backup of your important files and libraries available.

  • You can download additional content on a hard drive external?

    I have Logic Pro X 10.0.0 and I want to download any additional content. Unfortunately, I don't have enough space on my laptop. Is there a way to download additional content on an external hard drive?

    You can do this only if you install the full application of Logic Pro X hard disk external. You need to either get the entire program on your MacBook or your external storage device.

  • Transfer of pictures to a hard drive external

    What should I: 1) 13-inch aluminum end 2008 MAC 2) WD - My passport for MAC external hard drive

    Goal: Move my photos from my MAC to the external hard drive. Since I was 20K photos on my MAC, I think this place free (once I double, triple check everything works and then delete the photos on my MAC) on my MAC, improving performance.

    Given that the HD is already set up for a MAC, just do the HD MAC, drag the photo from the HD folder and let it do its thing?

    Thanks - Rob

    You drag it there, launch iPhoto, Aperture, or Photos with down option, click on another library for Photos, choose and keep a copy of it on an external drive then.

    (141524)

  • HARD drive external for Satellite Pro M10

    Hello!!

    I would buy an external USB HDD to my computer, but I don't know if I can buy anyone. USB 2.0 is not, but I think that only touch the speed of transfer, no?

    BIOS version 1.50

    I find this HARD disk, it'll work?

    http://www.Maxtor.com/portal/site/Maxtor/MenuItem.6adb6b8313633595062e6be791346068/?channelpath=/en_US/products/external%20Storage/Maxtor%20Basics%20Family

    Thnx

    Hello

    Satellite Pro M10 certainly has USB 2.0 ports, firewire, and IrDA interface. The operating system uses a standard USB Windows driver.
    I put t see any problems with the use of the external USB HDD.
    It should work.
    But in my opinion, you should buy an external USB HDD that supports an IrDA interface. It s much faster as a USB connection.

    However, the operating system must be able to handle the 250 GB external HARD drive

  • Support MacBook Pro OS 10.7.5 using Time Machine on hard drive external & Clean install on new SSD capital El

    I ordered a new SSD to upgrade my 2011 MacBook Pro that runs on OS 10.7.5. I would like to install own El Capitan on the new SSD. Can I save my current hard drive using Time Machine and an external hard drive and then re - download my old stuff in the new SSD? Is this possible at all?

    Basically, I want the new SSD to be as clean as possible. Obviously, I would only the files and applications on my computer current to be transferred. I would be grateful and recommendations on the best way to do this. Thank you.

    Look at these links for orientation:

    http://pondini.org/TM/19.html

    http://pondini.org/TM/5.html

    I would format the new SSD in Mac OS extended (journaled), personally Run Time Machine to install your data and then install El Capitan.  In the end, it's your decision.

    Ciao,.

  • Satellite P100-160i - save on HARD drive external

    Can someone tell me how to save all my laptop that is to say all programs and all on an external hard drive please?

    Install Norton ghost Image and create your own recovery image. You can save it on an external device. If you have problems you can use it to get your configured again operating system later.

    I do this almost 3 years and my recovery image is recorded on the second partition.

  • HARD drive external Toshiba PX1265E its not recognized

    Hi all

    I had just recently replace my laptop with a new feature of Windows 7 like the old Vista are blown.
    Just tried to log on my external * Toshiba HDD PX1265E * and to my surprise it is not recognized.
    Problem is I have a lot of pictures on it of my son when he was a baby.

    Are there drivers or software out there that can get the files etc... the device using Windows 7.

    Hello

    This external HARD drive is a device plug & play it means that no driver is required
    If it looks more like a hardware problem HDD :(

  • Why is my hard drive (external) working on a Windows PC, but not on my Mac?

    I recently got a few files transferred to a friends computer to my external hard drive and when I plugged back on my Mac it wasn't appearig in the finder or disk utility. The power led on the hard drive lit. When I plugged it in my friends mac hard drive was there, but when you clicked on the folders they were all empty. We then plugged on a Windows computer, and it worked fine! What keeps it from working on Mac?

    Thanks for the help

    Hi Rotherham:

    The hard drive has been formatted in Mac (Mac OS Extended journaled) format.

    He worked on your Mac before that?

    Were the files that you copied from another Mac or Windows computer?

    You say you plugged into a computer in the window and it worked fine.

    A Windows computer will not read an external hard drive that is formatted as OS extended (journaled).

    So maybe it is formatted in NTFS in Windows.

    Kim

  • HARD drive external bootable on Tecra S2

    I have a Tecra S2 and you want to boot up the laptop to an external 2.5 "HDD through a USB 2.0 connection. Is it possible and if yes, what should I do? So far I've failed. He sees the HARD drive, but cannot boot from it. I disabled the original internal HDD in BIOS, priotorised external HARD disk, same removed internal HARD drive, but nothing has worked so far. Someone who can help out me?

    Hello

    As far as I know it is not possible to boot from the external HARD drive.

Maybe you are looking for

  • Re: No Internet on the Satellite Pro C660

    Someone at - he of the drivers from the internet that can run internet on Toshiba Satellite Pro C660? Laptop is preinstalled with Win7 64 bit. I put t know what the card is inside the laptop. He formerly Atheros, but now his Realtek, was great work u

  • Switchable graphics ATI RADEON 6770 M

    Hi all I have a HP Pavilion dv7 6180SL. Everything was good until I updated to 8.1 windows today. My problem is with switchable graphics ATI RADEON 6770 M. I downloaded the latest driver from the DRIVERS of HP SUPPORT but the graphics card does not w

  • Two remotes with RS232 splitter

    Hi all. I did a VI this control (the part of many other things) a stage of PI and a shutter Thorlab. The problem is that both need an RS232 connection and my computer has a single port. I bought a dispatcher RS232 and now the two are connected, but o

  • How can I retrieve my contacts from an old laptop that I have more?

    new computer lost contacts Hard drive crashed on my old laptop.  I now have a new and recovered most of my files with Carbonite, but nothing of Outlook Express has been recovered.  I have NO contacts and would like to know if there is a way to get ba

  • Passworrd Reset on windows connect

    Original title: ' ideas: insert an error code or give a brief description of what you're trying to accomplish or fix.__reset passworrd on connect windows ' I forgot the password to logon windows vista Home premium windows Recent changes to your compu