HARD drive external bootable on Tecra S2

Similar Questions

• PC stopped recognizing 3.5 hard drive external Toshiba

  Hi all

  I have a 3.5/250 GB Toshiba hard drive external. I use Windows XP as my operating system and for some reason, my PC stopped recognizing saying 'USB not recognized '.
  It is supposed to be taken & play and I'm sure that I didn't have a driver, when I installed it.
  If anyone can help or has any suggestions, I would be grateful.

  Thank you

  Malc

  Hallo Malc

  It is possible that you have removed the external device without using the option remove the device safely. Restart the machine and try again.

  Otherwise, you can remove all ports USB device manager and start option to add material on the list. After detection and installation it should work again.

• HARD drive external (E :) hangs and then said: "Not responding" when trying to backup.)

  Original title: backup on an external hard drive

  I'm trying to back up my files on an "External" hard drive It's me E: drive as the location, but it just hangs up there says "not responding". I tried to do an "Archive" in the "My Documents" folder, I saw files transfer, however all my names of my files are now blue in 'My documents' whatever that means? What drive letter should go a hard drive 'external '? I should be able to click on that drive and see what is on my external hard drive, but it doesn't "not responding"...

  External drive (E :) will not name until you give him one.  It is possible that the disk has not been formatted yet.

  Open disk management (start > run > diskmgmt.msc > OK).
  You will see something like this:

  

  You will have a line for 'Disk 2' but which shows next to your "disc 1". Please provide ALL information in the "Disk 1" line.

  For example, if you had the image above, the response from you I'm looking for would be:

  Disc 1 - Basic - 186,31 GB - online
  Ghost images (D :) - 93,13 GB NTFS - healthy (active))
  Data backup (E :) - 50,57 Go NTFS - healthy)
  42.61 GB - not assigned

• Transfer Media Player on a hard drive external?

  I run XP and bought an external hard drive to my music collection.  Is it possible to transfer the Media Player itself on the hard drive external?  I'd rather play on Media Player on those of the drive, that there is none.  Choose a record and that's all that you can play at the same time; No shuffle or several artists in one sitting.

  Any suggestions, anyone?

  There is no need to transfer WMP itself hard disk external, WMP can perfectly handle music on other players.

  In WMP, please press F3 to display add it to the library, make sure that Advanced Options are displayed and add the folder music on the external hard drive in the list. Now, all the music on the hard drive will be added to the WMP library.

• Unable to transfer data from the laptop hard drive external/pendrive.

  Dear Experts,

  Unable to transfer data from the laptop hard drive external/pendrive.

  Each time that tried to transfer meesage seems to the authorization of the administration.

  Kindly help me to solve the problem.

  Concerning

  Hello

  Follow these steps and check:

  To take ownership of a folder

  a. click on the USB key you want to learnand then click on Properties.

  b. click on the Security tab, click Advanced and then click on the tab owner.

  c. click on change. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. click on the name of the person you want to give to the property.

  e. If you want that person to be the owner of the files and subfolders in this folder, select the owner of subcontainers and objects replace check.

  f. click on OK.

• Hello. I created an image of HD main on a hard drive external drive. It is: HD used 282 GB 320 GB, disk backup image has 251 gb. Is all backed up? Can anyone help on this? Thank you

  Hello. I created a disk image of my mac HD on an external hard drive. It is: my mac HD is used 282 320 GB, backup disk image, I did a 251 gb. Is all backed up? I need to be sure before you reformat the HD and install mac so original. Can anyone help on this? Thank you

  Probably not.

  Need an external hard drive as large or larger than the drive you want to back up.

  You have not said what backup software you are using.

  I use Carbon Copy Cloner by https://bombich.com/ $40.00 there. You can also use Super Duper.

  These two products will make a bootable backup complete or a clone of you existing hard drive, including your recovery partition.

  Once you made the backup, if your hard drive has never been to fail, you could simply start on the external backup drive.

  If you back up because you're upgrading the hard drive for an SSD, you can put the SSD in an external enclosure and clone your drive in the SSD, test it, and then replace the HD when you are confident that it works well.

  P.S. External hard drives are cheap these days. Here is an example: http://www.bestbuy.com/site/wd-my-passport-ultra-1tb-external-usb-3-0-2-0-portab le-hard-drive-classic-black/7869174.p? id...

  Kim

• How to do, step by step, back up my photos and my Word Documents to my XP PC on a hard drive external?

  I need an 'idiots guide' to tell me how to back up my XP files on the external hard drive, I bought. When I plug in the USB the PC recognizes as component 'F' but wants to only read what is on it - how to consolidate my files in the files and send them to the external hard drive? I hope that the system can automatically asked "Do you want to save your files on this disk" - but no luck!

  I can't advise you how to backup your personal data, since it depends a little on the program that you use to back up your data, but I would recommend that look you at something else that the backup utility provided with your version not specified XP.

  I think that the Microsoft Support engineer should follow its own advice, use the XP Backup program to backup some system do not have a floppy drive (which is today typical), completely knock out the HARD drive or at least remove all personal files to simulate a disaster, restart and then see how he gets back data by using the backup utility in XP.  Please post your results.

  If you are using in relying on the built in NT backup to back up your system, it is the primitive technology (obviously - since you will be asked for a floppy disk when it is done).  If you have a disaster (even minor), you will probably have a big problem, trying to recovery your stuff, if you don't have a floppy drive - or even if you do not have a floppy drive.

  If you want to make a backup, it makes sense to use modern technology - and that the technology is not integrated into XP.

  There are many popular options for XP Backup and imaging software (s) of third parties.

  A people a popular seem to love East of Acronis.

  With this (free 30 day trial) you backup, you can make a bootable CD or bootable USB (which is modern, huh?) and use than disaster.

  They used to have a completely free version - maybe no more - just the trial, then you must buy it, but it is highly respected.

  It is so much more robust than the XP Backup, it's laughable.

  Many other options if you do a little research on Google...

  Here are a few products that PML has proposed may be attractive (use Google to find them):

  Acronis
  Macrium Reflect
  Paragon backup and restore
  DriveImageXML

  Some disk cloning software for you to Google ideas:

  Acronis True Image Home 11
  EASEUS ToDo Backup
  Paragon Drive Copy or Partition Manager Personal
  Casper
  Norton Ghost

• How to restore vista OPS hard drive external bitlocker encrypted after main disk failure

  I am running Vista Ultimate and my main hard drive is encrypted by Bitlocker.  I use the backup utility in Vista for backup of that my drive hard main set on a USB attached hard drive which is also encrypted by Bitlocker.  In a case of failure of the primary hard drive and installing a new hard drive, how can I restore my main hard drive (the new drive) to the USB attached bitlocker encrypted external hard? My vista ultimate OPS has been upgraded to the origin of vista home premium and so I did not have the ultimate Setup DVD disk.  I have the disk of vista Home premium.

  Create a recovery disk that the restoration of the backup complete on this topic option (including family Vista drive premium will be not because this option is only available on the Enterprise and Ultimate versions)-should not do anything on bitlocker on it (which will take care of itself during the restore process unless you configure to use a flash drive for protection - then the flash player is also required {but) not a recovery disk different}).  You can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD (including backup complete PC Restore).  Be sure to get the drive to boot correctly - there are several ways to make records and this requires a way for it to work (but those that are included in the manual or on the website).

  For more information, here's a great article on bitlocker with Vista.   It does not exactly cover your question, but it is very instructive in the process and the technology (and might help you if you are facing a problem on the road) and its good information to have if you use bitlocker (which can be difficult and can cause problems of recovery if you do not just because of the extra complication of encryption (backup and restore). http://technet.microsoft.com/en-us/magazine/2008.06.bitlocker.aspx.

  I hope this helps.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• Rescue and recovery - hard disk external bootable

  Hello!

  I had a problem with my external hard drive

  I formatted it, created the first 160 GB (mbr) partition

  I created backup top and makes bootable by the option "create rescue media.

  What is completed "successfully."

  But...

  I can't it boot from usb, because I got error:

  "NTLDR is missing".

  How to fix?

  Thank you very much

  What operating system are you using and what version of rescue and recovery?

  It is my understanding that ACTIVATE set must take place until all the data is placed into the USB port.

  My USB-hdd(1 tb) had files of data provider on it when I bought it. I ran to create a rescue support; It wouldn't boot.  I made the ACTIVE partition and still it would not boot. I have copied the close data of USB on my C drive, reformatted the USB with set ACTIVE partition.  I ran then create a support of rescue on the USB port and it will boot now.

  During the "boot failure" I think that it started just a black screen with a flashing underscore. Your system says NTLDR (nt bootloader) was not found. What is probably expected. It appears during the rescue process create a media, the necessary files are placed on the USB port, showing your list of directories. For some strange reason, the partition do NOT bootable after data are placed on the USB, then the rendered partition active. (Probably a problem breast to create a rescue support?).

  If you have a DVD burner, you can create a DVD rescue media, leaving your intact (with the data, but not bootable) USB. During a power outage, start you the DVD (standalone RNR) and that it points to the RNR backups on the USB port.

  I think that you focus too much on the message NTLDR not found and wait the NTLDR to appear on the USB port.

  On the other side of the room, there may be a problem with your boot sequence, which I doubt.

  I copy your files on your C drive, if possible _user, reformat the active USB/serial  Then everything should work.

• Finder or by default in the view extended folder on hard drive external

  I'm trying to understand why, when I open an external window of Finder on my hard drive, it always expands to display a specific folder I used months ago. I do not know Finder using the default views and I can't determine how to reset back to the view of the root of the drive.

  Thank you.

  CA

  Hi leftysrevenge!

  I can certainly understand not wanting the Finder of an external drive window to keep opening to a folder that has been used months ago because I wouldn't mine to display that way either.  No worries, there are a few steps here to get the default view has changed on this issue.  Follow these steps here and he should be able to be changed for this external drive:

  Open the Finder, click Display > Display Options > a window will appear to select your display preferences, make your selection here > and if possible use the button "Use as default" to maintain this point of view.

  The "Use as Defaults" button may be grey, if the format of the external drive is not OS X Extended.

  Enjoy your day!

• Move the copy of pictures on hard drive external

  I am on an iMac plus old (2008), El Capitan running and I want to copy all my pictures and videos in Photos on an external hard drive just in case of death of my office.  Can I do that and still keep my library of photos on my Mac and use it as usual? If so, how do I?

  Thank you

  First, make sure that the drive is formatted as shown in this screenshot:

  

  Then just drag the module external library of Photos of your folder on the hard drive and let the Finder copy it.

  Do you have a backup in place strategy?  If this isn't the case, you should, because at some point, you will lose the files of your boot drive either by accident or in a car accident.  It's inevitable.  Easier to implement backup system is with Time Machine, which comes with every Mac.  Here's how to set up: use Time Machine to back up or restore your Mac - Apple Support

  With a backup like Time Machine, incremental backups on every hour, you will always have a current backup of your important files and libraries available.

  

• You can download additional content on a hard drive external?

  I have Logic Pro X 10.0.0 and I want to download any additional content. Unfortunately, I don't have enough space on my laptop. Is there a way to download additional content on an external hard drive?

  You can do this only if you install the full application of Logic Pro X hard disk external. You need to either get the entire program on your MacBook or your external storage device.

• Transfer of pictures to a hard drive external

  What should I: 1) 13-inch aluminum end 2008 MAC 2) WD - My passport for MAC external hard drive

  Goal: Move my photos from my MAC to the external hard drive. Since I was 20K photos on my MAC, I think this place free (once I double, triple check everything works and then delete the photos on my MAC) on my MAC, improving performance.

  Given that the HD is already set up for a MAC, just do the HD MAC, drag the photo from the HD folder and let it do its thing?

  Thanks - Rob

  You drag it there, launch iPhoto, Aperture, or Photos with down option, click on another library for Photos, choose and keep a copy of it on an external drive then.

  (141524)

• HARD drive external for Satellite Pro M10

  Hello!!

  I would buy an external USB HDD to my computer, but I don't know if I can buy anyone. USB 2.0 is not, but I think that only touch the speed of transfer, no?

  BIOS version 1.50

  I find this HARD disk, it'll work?

  http://www.Maxtor.com/portal/site/Maxtor/MenuItem.6adb6b8313633595062e6be791346068/?channelpath=/en_US/products/external%20Storage/Maxtor%20Basics%20Family

  Thnx

  Hello

  Satellite Pro M10 certainly has USB 2.0 ports, firewire, and IrDA interface. The operating system uses a standard USB Windows driver.
  I put t see any problems with the use of the external USB HDD.
  It should work.
  But in my opinion, you should buy an external USB HDD that supports an IrDA interface. It s much faster as a USB connection.

  However, the operating system must be able to handle the 250 GB external HARD drive

• Support MacBook Pro OS 10.7.5 using Time Machine on hard drive external & Clean install on new SSD capital El

  I ordered a new SSD to upgrade my 2011 MacBook Pro that runs on OS 10.7.5. I would like to install own El Capitan on the new SSD. Can I save my current hard drive using Time Machine and an external hard drive and then re - download my old stuff in the new SSD? Is this possible at all?

  Basically, I want the new SSD to be as clean as possible. Obviously, I would only the files and applications on my computer current to be transferred. I would be grateful and recommendations on the best way to do this. Thank you.

  Look at these links for orientation:

  http://pondini.org/TM/19.html

  http://pondini.org/TM/5.html

  I would format the new SSD in Mac OS extended (journaled), personally Run Time Machine to install your data and then install El Capitan.  In the end, it's your decision.

  Ciao,.