Hard drive failure immanent - have spare hard drive to install, but you need to know how

Similar Questions

• I have my ket produced for pro 11 you need to know how to install

  have my ket produced for pro 11 you need to know how to install

  Hello

  Please see Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  Hope that helps!

  Kind regards

  Sheena

• my phone asking me always Apple ID password of the account that I did not create. I have this account in my settings, but I don't know how to remove it. Thanks for the reply.

  my phone asking me always Apple ID password of the account that I did not create. I have this account in my settings, but I don't know how to remove it. Thanks for the reply.

  There are several places an identifier Apple is used on an iPhone.

  • If it's the Apple of a former owner of the phone ID, and it is in settings/iCloud grace to find my iPhone activated, ONLY the person who set up the Apple ID can remove (see: find my iPhone Activation Lock: a mechanism of extraction of the previous owner)
  • If it's the Apple ID in Settings/iTunes & App Store just log out, then log back with the correct ID of Apple.
  • Do the same for iMessage and Facetime, if that is where the Apple ID is used.
  • If he is asked during the updating of the apps means that applications have been purchased or downloaded using this code from Apple. To resolve this issue, you must remove the application, and then buy with your Apple ID.

• I have the following plan to explain, but I don't know how interperent it

  Hello all;
  
  I have the explain plan following below obtained pl/sql developer, but I don't know how to interperent or use it for my performance problem
  

  PLAN_TABLE_OUTPUT          
             
  ----------------------------------------------------------------------------------------          
  | Id  | Operation                       |  Name                | Rows  | Bytes | Cost  |          
  ----------------------------------------------------------------------------------------          
  |   0 | SELECT STATEMENT                |                      |     1 |   108 |   932 |          
  |   1 |  SORT GROUP BY                  |                      |     1 |   108 |   932 |          
  |*  2 |   TABLE ACCESS BY INDEX ROWID   | OPERATION            |     1 |    34 |    12 |          
  |   3 |    NESTED LOOPS                 |                      |     1 |   108 |   929 |          
  |   4 |     NESTED LOOPS                |                      |     1 |    74 |   917 |          
  |*  5 |      HASH JOIN                  |                      |     1 |    60 |   916 |          
  |*  6 |       TABLE ACCESS FULL         | WORK_ORDER           |  1302 | 46872 |   787 |          
  |*  7 |       TABLE ACCESS FULL         | SERIALIZATION_TRACE  |   129K|  3044K|   123 |          
  |*  8 |      TABLE ACCESS BY INDEX ROWID| PART                 |     1 |    14 |     1 |          
  |*  9 |       INDEX UNIQUE SCAN         | SYS_C004302          |     1 |       |       |          
  |* 10 |     INDEX RANGE SCAN            | RCLX_OPERATION_3     |     1 |       |    11 |          
  ----------------------------------------------------------------------------------------          
             
  Predicate Information (identified by operation id):          
  ---------------------------------------------------          
             
     2 - filter("O"."RESOURCE_ID" LIKE 'TEST%')          
     5 - access("W"."BASE_ID"="PT"."WORKORDER_BASE_ID" AND           
                "W"."LOT_ID"="PT"."WORKORDER_LOT_ID" AND "W"."SPLIT_ID"="PT"."WORKORDER_SPLIT_ID" AND 
                "W"."SUB_ID"="PT"."WORKORDER_SUB_ID")          
     6 - filter("W"."TYPE"='W' AND "W"."PART_ID" IS NOT NULL AND "W"."PART_ID"<>'RMA' AND           
                "W"."PART_ID"<>'REWORK' AND "W"."CLOSE_DATE">=TO_DATE('2010-01-01 00:00:00',           
                'yyyy-mm-dd hh24:mi:ss') AND "W"."CLOSE_DATE"<=TO_DATE('2010-12-31 00:00:00',           
                'yyyy-mm-dd hh24:mi:ss'))          
     7 - filter("PT"."SERIAL_NUMBER"<>'N/A')          
     8 - filter("P"."PLANNER_USER_ID"='CCA')          
     9 - access("W"."PART_ID"="P"."ID")          
         filter("P"."ID"<>'RMA' AND "P"."ID"<>'REWORK')          
    10 - access("W"."SUB_ID"="O"."WORKORDER_SUB_ID" AND           
                "W"."BASE_ID"="O"."WORKORDER_BASE_ID" AND "W"."LOT_ID"="O"."WORKORDER_LOT_ID" AND 
                "W"."SPLIT_ID"="O"."WORKORDER_SPLIT_ID")          
         filter("W"."BASE_ID"="O"."WORKORDER_BASE_ID" AND           
                "W"."LOT_ID"="O"."WORKORDER_LOT_ID" AND "W"."SPLIT_ID"="O"."WORKORDER_SPLIT_ID")     
             
  Note: cpu costing is off          
            

  Here are a few slides that I use when I present to you how to read explain plans:
  http://www.morganslibrary.org/Pres/lad/cloug_1_xplan.PDF

  |*  6 |        TABLE ACCESS FULL         | WORK_ORDER           |  1302 | 46872 |   787 |
  |*  7 |       TABLE ACCESS FULL         | SERIALIZATION_TRACE  |   129K|  3044K|   123 |
  

  Essentially, your question is here. you read a lot of lines to return alone. Do you need them all? To get them you do full table scan on the two tables? An index would help?

  and yes I am voluntarily is not giving you the answers but rather to point you in the right direction to find it yourself.

  On the one hand, I don't know your version, your SQL, or what indexes exist.

• I have a Matshita DVD/CD UJ890JS. I need to know how to activate the readability of the disc and the ability to read and format new discs.

  I uninstalled the device and reinstalled it which didn't work. Even downloaded the drivers and software do not help. I have too much important data on my computer to make a full recovery, is not an option.

  Help!

  Maybe the disc is worn out?  You can buy a replacement for it for $20, and you can buy an external DVD/CD burner for as little as $30.  Those external plug into a USB port.

  Once you have your system back as you I invite you to buy an external hard drive and a good 3rd party backup program. You can configure it to automatically do everything in time and frequency of your choice. 1.5 TB external hard drives is about $90 these days and a very good FREE backup program is the Easeus todo backup free that you can download from
  http://www.todo-backup.com/products/home/free-backup-software.htm . Who can make you save a lot of time and frustration, the next time something like this happens. Sooner or later, it happens to all computers for one reason or another.

  Good luck.

• Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:

  Hi Gordon

  I just downloaded drivers from the Dell website in support of xp

  I have tried to reboot from the XP cd but got the following message when I tried to install

  "This program is blocked due to compatibility issues"

  Program - the installer of Windows

  Editor - Microsoft

  Location: D:\1386\winnt32.exe

  Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"

  I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?

  You say that you have started from the XP CD, but something is wrong with that
  you do. Just boot from the CD and follow the prompts for a
  clean install. A new installation by formatting the
  drive and does not care what version of Windows is installed (or
  even if any version of Windows is installed.

  Ken Blake

• Windows XP "Apple Mobile Device Driver not installed not" device need driver mobile HELP running XP service pack 3 using an iphone 4

  Problems with the iphone 4 who it says in itunes that "Apple Mobile Device Driver not found" and nothing happens when it is connected to the USB port on charge even not. Running Windows XP 32-bit with Service Pack 3. but think I deleted all the drivers mobile when I uninstalled my Blackberry and removed the current mobile device drivers. Apple went through just fine and everything is OK it is a problem of PC and XP. Microsoft help put me on this site because need to know how to solve this problem I hope that somewhere there are mobile device drivers that work with the iphone? Site Internet de Microsft has 5 mobile device for Windows 7 drivers, but not for XP. Need help!

  Apple went through just fine and everything is OK it is a problem of PC and XP.

  Evasive classic.  It's always the problem of the other guy.

  And the classic response of some evil-educated person "technical support":

  Microsoft help put me on this site

  If the error message says 'Mobile Apple Device not found Driver' then it's an Apple problem, pure and simple.  The device driver mobile for the iPhone comes from Apple, not Microsoft.

  Do you remember what you were doing when you "deleted all the drivers mobile when I uninstalled my Blackberry and removed the current mobile device drivers?"

  Probably not... and you have not explained what has been included in "Apple went through everything."  It is time to start over by removing everything related to Apple and then put it back correctly.

  First, however, the fact that the iPhone does not load even when connected to a USB port is a bit worrying.  Works in everything else in this USB port (for example, a USB flash drive)?

  Have you tried all the USB ports on your computer?  Take a look in the Device Manager (start > run > devmgmt.msc > OK) and see if there are any icons showing warning.  If so, double-click on the entry and information "device status".

  Take a look at the event viewer (start > run > eventvwr > OK).  There is no need to go far.  Connect your iPhone, then look at the newspapers (System and Application) for since a few minutes see if there are any errors or warnings.  If so, double-click on it to get the event properties window, and then click the "Copy" icon (just below of the)

  Have you tried to recharge the iPhone using the adapter connected to Apple's USB cable?  Does it work?

  Have you tried to connect the iPhone to another computer?  With what results?

  Assuming that the hardware (iPhone, USB cable, and USB ports on your computer) is not working properly, see the following topics.

  To perform a "clean" iTunes installation uses this technique proposed, from Support of Apple HT1926 article.

  Warning: uninstall utility for cleaning Windows mentioned in the instructions below has been removed from Microsoft download servers because sometimes it seems more removed he was supposed to (I think that this phenomenon was linked to the bureau uninstalls).  You can still get utility Windows Installer Cleanup--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html here is a free alternative Revo Uninstaller. Before using these cleaning products, you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.

  Go to control panel > Add/Remove programs
  Remove these applications:
  1 Apple Software Update
  2. Apple Mobile Device Support
  3 Hello
  4 iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)
  5 iTunes
  6 QuickTime

  Open my computer > C: > Program Files
  Delete this files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  Download & install the Windows Installer Cleanup utility: [see note above regarding cleanup utility]
  http://support.Microsoft.com/kb/290301/
  Launch the utility: start > programs > Windows Installer Clean Up
  Select one of the applications mentioned above and click on remove

  Restart the computer
  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/

• HP 2000: Synaptics Touchpad driver trouble (installed but does not appear in Device Manager)

  I had a problem with my touchpad for months. The synaptics touchpad driver is installed but the touchpad does not work and does not appear in either (just my external mouse) Device Manager. . I tried various troubleshooting methods, but none worked. Any help would be a lot for me. Thanks (in advance).

  PROGRAMS AND FEATURES

  

  DEVICE MANAGER

  

  Hi @decyferme,

  Welcome to the HP Forums!

  It's a great place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  How can I find my model number or product number?

  I understand that you had a problem with the touchpad for months because it is not responding. Although the driver is listed in programs and features in the Device Manager is not listed.

  Have you checked for virus and malware?

  Have you done all Windows updates?

  Have you tried to run the troubleshooter in Windows?

  Did you run HP Support Assistant to facilitate updates of HP?

  First you would try this step.  Some models, you can enable or disable the touchpad by double clicking on the top left corner of the touch pad.  Please see if it is applicable for you.

  Then in Device Manager, view hidden devices and search the hardware changes see if the touchpad now will be seen.

  Here is a link to the HP laptops - use and troubleshooting of the TouchPad and ClickPad (Windows 8) that should help you too.

  To say thank you for the reply, please click on the thumbs upwards the button below.

  If this gave a solution for you, please choose the solution provided to help others to find.

  Good luck!

• I have a Lexar card and need to know how to download pictures to the computer

  I have a Lexar of my camera card and I need to know how to download pictures to the computer

  Most of the cameras equipped with a cable to connect to a computer via usb.
  Plug in, turn on the camera, windows should it detect automatically as a removable drive.
  Use windows Explorer to access this drive and drag-and - drop photos you want on your pc.
  If you have a card reader, you can remove the card from the camera, put it in the drive and then browse your removable drive and drag and drop your photos.

• I have a toshiba satellite T135D laptop and I don't know how to start my built in webcam which program should I use?

  I have a toshiba satellite T135D laptop and I don't know how to start my built in webcam which program should I use?

  Hello George,.

  I could not find this model number on the Toshiba site, so I suggest that you look at this page as a place to start your search: http://support.toshiba.com/drivers . They had a driver for a webcam, which is perhaps what you are missing. But in all cases, the Toshiba site is where you are most likely to solve the problem with the help of your webcam.

  Let me know if this helps you.

  Kind regards

  BearPup

• I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  Thank you more:
  Steve Vidacs /Hungary

  On Monday, November 5, 2012 20:14:15 + 0000, istvanvidacs wrote:

  I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  You must have installed a Windows 7 64-bit driver (if it exists)
  for this. Do you have? Otherwise, navigate to the web site of the camera
  manufacturer, search, download and install it.

  Ken Blake, Microsoft MVP

• I need to know how to remove the most recent version of Firefox. I JUST downloaded tonight and my computer does not have this edit bar little to work with, so I can download the reader good Adobe and my internet was screwed up ever since I downlo

  I need to know how to remove the most recent version of Firefox. I JUST downloaded tonight and my computer does not have this edit bar little to work with, so I can download the reader good Adobe and my internet was screwed up, since I downloaded the new version of Firefox. I want just the old version of this back because I can't download the Adobe stuff which is necessary to protect my computer against hackers apparently not. It would have been nice to know he had a problem with the new update of Firefox BEFORE I downloaded it. I have Vista, which is usually a problem with Adobe and Firefox. I don't seem to be able to run a lot of Adobe at all on my computer because of the Vista.

  This has happened

  Each time Firefox opened

  http://support.Mozilla.com/en-us/KB/installing+a+previous+version+of+Firefox

• I don't know what iphone I.  I have 3 'old' and you need to know where to go to understand who is who.

  I have 3 older iphones and that you need to know exactly what they are.  How and where can I do this?

  Denise

  I need to know if its iphone 4, 5, s

• I have an old computer use more, but I need to get some documents, but I don't remember the username to connect to windows

  I have an old computer use more, but I need to get some documents but I don't remember the username to connect to windows and there is no index. How can I connect

  Hi joedoerksen,

  Follow these methods.

  Method 1: Start the computer in safe mode. Built-in Administrator account would be displayed on the Welcome screen. Choose the account administrator and you should be able to boot to the desktop, if you have not set a password for the default Administrator account.

  Method 2: If you have set a password for the default Administrator account, then the only option is to go for a parallel installation of Windows XP and retrieve documents.

  Follow the method 4 install Windows XP to a new folder (parallel installation) of the article.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

  Method 3: Follow the steps in the article.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  See the article on the Microsoft Policy on lost or forgotten passwords.

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

• Hi, I have an acer 7739G and I want to use the construction in camera, but I don't know how to put on... help please!

  Hi, I have an acer 7739G and I want to use the construction in camera, but I don't know how to put on... help please!

  Hello

  Search for information to Acer.

  http://support.Acer.com/us/en/default.aspx

  See you soon.