Hard drive firmware update - Active shock protection

Similar Questions

• Seagate Hard Drive Firmware Update for the drive model: ST1000LM024

  I have (HP Pavilion dv6-7180se Entertainment Notebook PC). All the drivers for this model installed correctly except the drivers Frimware (Seagate hard drive Firmware Update) and (PLDS Optical Drive Firmware Update). the first one says "this hard drive model is not supported. Model = ST1000LM024"but my hard drive came from the factory, so what is the practice solution to install this driver? images .view of problems:

  This is to seagate:

  and for PLDS:

  Need help. Thank you.

  What mean of these messages, is that these "Firmware updates" do not apply to material in your specific computer. The two "Seagate Firmware Updates" are respectively for the hard drives of 250 GB / 320 GB and 500/750 GB hard drives. Your computer comes with a 1 TB hard drive, which is not subject to updates of the firmware. The "PLDS Optical Drive Update" is for another drive to CD/DVD only installed in your computer and also does not apply. There is no further action to take... Do not attempt to install these updates of firmware, because they do not apply to the hardware in your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• AO722 hard drive firmware update

  I have a netbook Acer AO722-0022.  On site downloads Web of Acer support page, at the bottom of the BIOS downloads section, an update of the firmware "to improve the performance of the hard disk" is listed.  The inscription is "WD version 9545" supplier.  Can I use this update?  My hard drive is WD5000BPVT-22HXZT3 (500 GB).

  Yes, it should be safe to run this update.  The update will check to make sure that your HARD drive is not already have and make sure that it is appropriate for your current HARD drive.  Otherwise the update will not occur and you will be informed.

• sp40966 drive firmware update problem

  While they inspected the m9400t support page today, I found the following link:

  IMPORTANT - prevent any hard drive crash

  I checked the link and found that I needed this update the hard drive firmware as my main drive is a Seagate 750 GB SATA drive. I've printed the information, then progressed to follow the steps. All is well until the phase of "reboot" and that's when things went south!

  First - when the computer reboots, I had the update screen and saw the message on the interface of disc must be set to IDA and because the mine was set to RAID I reset to IDA and restarted.

  Next - screen update again and began the process of update. Received a message that file binary download was complete. Following message "trying to read HP26CE3D.bin ', and this is where things went"South ".

  After seeing this message for ~ 30 minutes I had the feeling that nothing was happening, so against the warning messages on the screen to update on "do not restart", I did a power reset off.

  On the start of Vista could not start and I had the repair screen 'System '.

  Long story short, after several attempts to reboot the system using my diag CD material and my system restored I got the answer of the CD.

  On the next attempt of cold start, I used F10 and reset my disk for the original RAID interface and the system booted!

  So, I wonder just what is happening. What has the RAID vs IDA to interface to update the disk firmware?

  Anyone else out there there is a problem?

  ATTENTION: I cannot always be right, but I always give advice.
  Kudo accepted with gratitude if I have been of help to you.

  GOOD NEWS!

  Yesterday, I downloaded the update sp40966 on the site of HP support and installed without problems or errors! I now drive HP26 firmware version on my Seagate 750 GB drive. I don't know that what has changed, but the installation goes smoothly. Here are a few observations on this installation vs the other installation I tried that failed.

  1. this time the installation I have no advice or warnings on affecting the drive interface in bios RAID IDE as with the previous installation.

  2. once the bootable CD was created when I opened it I could see the files and folders in contrast to the previous three CD

  3. I'm a happy camper now. I'll mark my issue as resolved.

  Thank you to everyone who took the time to respond to my problem and now: "this case is closed the King!" (the last is for we all had to grow up with radio instead of television. Live long and prosper!

• Ugggh.  I have a 27-inch iMac late 2011 and the hard drive was updated with a new SSD.  The integrated cd/dvd had to be taken out.  I then bought a thought of superdrive, it should work.  It's frozen on my iMac!

  Ugggh.  I have a 27-inch iMac late 2011 and the hard drive was updated with a new SSD.  The integrated cd/dvd had to be taken out.  I then bought a thought of superdrive, it should work.  It's frozen on my iMac!  Gee, who could have possibly guessed that would happen?  I tried all kinds of silly workarounds, I found on the internet, but still it will not register the stack of DVDs and other discs I have.

  If you're like me and upgraded your iMac that came with a cd/dvd drive internal... so he has to come out to give way to the fusion or the SSD drive, do NOT buy the apple superdrive.  It will work with your computer!

  Think I'll get a laptop samsung...

  Ironic, isn't it? Own Apple SuperDrive will not work with Apple computers. Shame you don't check here first that we would have warned you. Return Apple overpriced and buy a nice third-party player for a third of the price. I love the LG units. You can consider a loading plate because they are more reliable, and you can use these pesky disc when you get one.

• Do I USE creative cloud as an external hard drive pour update my operating system?

  Do I USE creative cloud as an external hard drive pour update my operating system?

  The main cloud Creative program must be installed on your system's main drive - then you can't have the whole installation on a separate disk.  Applications can be installed on a different disk.

• Satellite C660 - update the HARD drive firmware question

  I have satellite C660 with hard drive: MK3275GSX, firmware: v.GT001M. On another Web site support site I found the update of firmware for v.GT002D ([link: http://www.dell.com/support/drivers/mw/en/mwdhs1/DriverDetails/Product/latitude-e6330?driverId=FP21C&fileId=3126089791&osCode=W732 & languageCode = en]).

  Can I use this update?

  Question may be stupid, but why firmware update HARD drive? Over the past 10 years I ve ever installed an update of the HARD drive.

  If Toshiba support doesn t offer an official update on the download page, I think that you don t need.

• PS5000 update the hard drive Firmware

  Hello

  I have a group of three members (P5000, PS5000e & PS4100) equallogic I used storage Dell Update Manager to update all three to V6.0.11, but when I tried to update V7.0.10, he asked for the firmware of the hard drive for the PS5000. So I downloaded the Firmware of the drive hard v8.0 and tried to apply, it didn't and after reading more far away the ps5000 has a controller of type 5, and it will not apply.

  Is it possible to get it to apply, I tried FTP and using the CLI interface but no joy, dell equallogic support will apply the firmware if the PS5000 is no longer under warranty? or what I can do to enforce?

  If not can I bypass this firmware of the hard drive and just update the Group of v7.1.8 using ftp and CLI? because the use of the Dell Storage Manager up-to-date it auto selects the box install the disk firmware.

  Kind regards

  Dan

  Hello Dan,.

  There is no way to update the firmware of the drive on Type 5 controllers.  No matter how you try to do the upgrade process.

  Yes, you can skip the update of the firmware of drive by directly FTP'ng firmware EQL to each Member, and then run the update to the CLI process.

  If you have the available series cables I suggest you do updates through the series, or at least check connections series to work on all members.

  Kind regards

  Don

• external hard drives firmware cant, said to be used

  material update

  I bought a Western Digital external hard drive "My Passport" opportunity and I'm trying to update the firmware. Message says that it is used by another program or something. I have disabled the Microsoft Security software that was another who had to be disabled in order to update the firmware. What else could be used by car and how do I stop it?

  Hello

  ·         What is the full error message that you receive?

  ·         Is there data on the hard drive?

  Method 1:

  I suggest you to put the computer in a clean boot state and check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to connect the hard drive to another computer and make a formatting of the hard drive and check if it helps.

  See article:

  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

• This copy of Windows is not activated. After replacing the hard drive. The activation window is empty.

  The activation window is empty. XP Pro SP3 + System (2 updates the version) beta of SP4 added due to problems of program. Build 2600.xpsp + sp3_gdr_101209-1647(Service Pack 3). Problem started after the replacement of the boot hard drive that wasn't. New drive has been a ghost of the old boot copy and active. Having the disk key and product to install but the CD won't deal with any problems indicating that the version of the program is different, probably because of upgrades SP. The program disk is that Windows XP Professional Service pack 2 Version 2002, Ref. 0304 x 10-52217 and has passed many tests for over the years of downloads genuine microsoft software. IHAVE run the MGADiag tool, results are pasted below. Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Release status: not activated
  Validation code: 1
  Code of Validation caching: n/a
  Windows product key: *-* - JK2RH - 233D 2-3466Y
  Windows product key hash: OyO/XO7E87J9EWmQwi2V5iTugIo =
  Windows product ID: 76487-016-5418163-22306
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 5.1.2600.2.00010100.3.0.pro
  ID: {4405CF79-6516-4ACC-85B5-1CAEA4F69ADB} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: Registered, 1.9.42.0
  Signed by: Microsoft
  Product name: n/a
  Architecture: n/a
  Build lab: N/A
  TTS error: n/a
  Validation of diagnosis: 025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a
  Version: n/a

  Windows XP Notifications data-->
  Caching of results: 1
  File: Yes
  Version: 1.9.40.0
  WgaTray.exe signed by: Microsoft
  WgaLogon.dll signed by: Microsoft

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: 2.0.48.0
  OGAExec.exe signed by: Microsoft
  OGAAddin.dll signed by: Microsoft

  OGA data-->
  Status of office: 101 non-active
  Microsoft Office XP Professional - 101 non-active
  OGA Version: Registered, 2.0.48.0
  Signed by: Microsoft
  Office Diagnostics: 025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3_3E121E02-385-80004005_3E121E02-452-80004005_3E121E02-312-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE; Win32)
  Default browser: C:\Program may Explorer\IEXPLORE.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: fast
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: fast
  Allow the Internet Explorer Webbrowser control scripts: allowed
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {4405CF79-6516-4ACC-85B5-1CAEA4F69ADB}1.9.0027.05.1.2600.2.00010100.3.0.prox 32*-*-*-*-3466Y76487-016-5418163-223065S-1-5-21-1202660629-362288127-839522115HP Pavilion 061ED848AA-ABA M7287CPhoenix Technologies, LTD 3.1720060420000000.000000 + 000237E32870184FA7C04090409Time(GMT-08:00) Standard Pacific03101101109117730D9B1B7FBEYAcQ79PePEvIKqvGGLVZKjuipo =54186-752-4095971-17653 1 Microsoft Office XP Professional

  License data-->
  N/A

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/A

  Activation 1.0 data OEM-->
  BIOS string matches: Yes
  Marker of the BIOS string: 1E0D3:Compaq Computer Corporation | 1E0D3:Compaq Computer Corporation | 1E0D3:Hewlett - Packard Company. 1005F:Hewlett - Packard Company
  Marker of OEMBIOS string. DAT: N/a, hr = 0x80004005

  Activation 2.0 data OEM-->
  N/A

  Hello

  • Do you have any disk of Windows XP?
  I'd say contact Microsoft phone support for assistance.
   
  Here is the link:
  http://support.Microsoft.com/kb/295539

• Reinstalled Windows 7 Home Premium after the passage of hard drives. Lost activation key between yesterday and today.

  Everything is in the title, well enough. I bought a student upgrade copy of Windows 7 in late 2009 / early 2010 and installed it via Bootcamp on a MacBook Pro. I recently updated my hard drive, and to my dismay, did not have my backup of Windows and so I reinstalled the operating system. My only problem is that I lost the key. Can't find anywhere I tried to download a product keys Locator, but when I entered the key, it gave me it tells me that there is a default keyboard and can therefore be used for activation.

  I'm kind of at a loss for what to do here. The ID of the product was rejected when I looked, but I know for a fact that this copy of Windows is legitimate, since I checked before BONE. Any help would be appreciated...

  Find your key product if your purchase of Microsoft Store:
  http://store.Microsoft.com/Help/FAQ?Err=T2#AT2

  For Digital River: go to www.findmyorder.com and pick up your order or you connect to your account information for this site. You'll need your order number and the password of the account used to purchase online or your e-mail user name and last 5 digits of the credit card used to make the purchase.

• What is disc optical drive firmware update for?

  Please can u tell me what is this update for?

  * Firmware update *.
  * This firmware solves some problems in the optical disc drive *.

  What is meant by the optical disk drive?

  Thank you

  Hello

  Optical disc drive is the CD/DVD drive.
  As mentioned, the firmware update solves some problems with the CD/DVD drive.
  Sometimes if the CD/DVD drive doesn't read or write some unique s CD or DVD s, an update of the firmware could be useful

  Good bye

• Satellite A660 - protection of HARD drive utility does not enable protection

  Hello

  I have a Toshiba Satellite A660 1F6, unfortunately the usefulness of Toshiba HDD protection does not enable protection because all the buttons are gray, and when I try to open it, a message appears: "He was not able to set up properly for the Service of HARD drive Protection System."

  I tried uninstalling and reinstalling, but the situation does not change.

  Thank you.

  Are you using the original operating system preinstalled that you got with your laptop?

• Difficulty finding a WD external hard drive after update to 10.11.4

  Hello
  last week I updated my OS to El Capitan 10.11.4.
  After that, I have problems, make a backup on my external drive (Wester Digital MY Passport Ultra).
  After reset total of my iMac, the backup runs once, but the hourly automated backup stops.
  A manual start is not successful.

  The external hard drive is visible in the finder, but clicking the map Backups.backupdb, nothing happens. After a reboot all backups are still visible.
  It seems that the external hard drive is dismantled after the initial backup.

  Time Machine is running, HD connected properly.
  Latest version of the WD software is installed.

  Does anyone know the solution for this problem.

  Hi wots36,

  Thank you for using communities Support from Apple! I'm sorry to hear you're having these problems with your iMac and your external hard drive. If you continue to have problems with your Time Machine backups, you can find information and troubleshooting procedures described in the following articles useful:

  If you cannot back up or restore your Mac with Time Machine - Apple Support

  OS X El Capitan: If Time Machine can't find your backup disk

  Concerning

• Satellite 4100xcdt does not recognize HARD drive after update BIOS version 8.20

  My laptop is a satellite 4100XCDT with windows xp and I want to install linux.
  Have the cd bootable linux (tested on other computers) but laptop doesn't not boot cd shape so I updated the bios with version 8.20 from the toshiba support site.
  Tried the disks formatted 1.44 and 7.20 such as recommended in the manual of the 4xxx series. BIOS has been updated successfully

  Result: after pressing the switch of the usual screen Toshiba appears, after the disc hard led flashes for a few seconds then windows except modus menu appears. After I made my choice (all tried) a few seconds later (and hard drive led light) flashes a blue screen (not enough long to read the message) and the computer is restarted. When starting from a back bootable floppy, I can't reach the (cd rom) drives (hdd) C and D
  But in my opinion that Windows Save menu modus is called from the hard drive (so I think that the hard drive still works)

  Hello

  Well, in my opinion a part on the HARD drive or bootable partition might be corrupted.
  You are right, if the windows save mode appears therefore HARD drive has been recognized by the BIOS and the HARD drive is bootable.

  I think there must be something wrong with the data on the HARD drive.
  Something similar happened on my laptop several weeks ago. After you use the chkdsk/r, I was able to run the operating system again. But then I installed everything again.

  On the Toshiba page I found the companion disc.
  The accompanying disk is capable of detecting your CD-ROM drive on the
  Toshiba during the boot process. If you need access to your CD-ROM
  Hunt, then delete "rem" Word the following lines in the Autoexec. BAT
  and CONFIG. SYS on the accompanying disk.

  REM if exist toscd001 a:\mscdex D:TOSCD001 /M:10 (AUTOEXEC. BAT)

  REM device = a:\toscdrom.sys (CONFIG. (SYS)

  It may be useful