Hard drive receiving "there is not enough space available to complete this operation" in Windows 7
Hello, I have install windows 7 upgrade from windows xp. My total hard drive is 500GB.but after installing windows 7, it shows 150 GB of disk space is not allocated. I tried disc managemaent IE right click on "Unallocated disk 150 GB" then volume.then simple new format then on next-next and then finish... and it displays error "there is not enough space available to complete this operation".n haa, I did a system restore in windows xp. Since the pc went slowly & with money problems... But it does not work.
Therefore, I installed windows 7 holding the pc faster. I think the restoration of the system to occupy this disk 150 GB space.so is show unallocated.
Please, be sure to this my problem. Tell me how to keep back my total 500 GB... Give me an appropriate solution. I will thanxful to you.
Kind regards
Pranjal
* original title - 150 GB hard drive is unallocated.showing "there not enough space available to complete this operation" _ *.
Hi pranjal1,
Please see article with other useful information:
http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
Tags: Windows
Similar Questions
-
I tried to use sound recorder to test a microphone and it came with an error message after pressing the record and then he said, sound recorder, not stop not enough memory available to complete this operation. Quit one or more applications to increase available memory, and then try again. This issue is out of nowhere because he has never had this problem before. It's a brand new computer that ive built from the bottom up, and I have 4 GB of memory. only a little more than 2 is actually identified by windows xp, however. Ive looked in the Task Manager and it says I have 2 GB of free, so I don't know what to do
Hi superconfused123,
This problem occurs because of a design limitation in the tape recorder.
You can check the link below: you receive a "not enough memory to complete this operation" error message when you try to record a .wav file using sound recorder: http://support.microsoft.com/kb/284893
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
"Your bootable USB key could not be created there is not enough space available on the disk.
I am trying to install a partition of Windows 7 with an ISO on a flash drive with Boot Camp Assistant. Everytime I try it however, I get the error "your bootable USB key could not be created there is not enough space available on the disk. The flash drive that I use for this is 64 GB, so I doubt that the issue has to do with not enough available space. I have already tried the obvious, like reformat the flash drive and retry the write. Is there something I could hurt or do differently to make it work?
MacBook Pro (retina, mid-2012)
2.6 GHz Intel Core i7
8 GB 1600 MHz DDR3
NVIDIA GeForce GT 650M 1024Mo
Use a 8GB drive.
-
Hey.
Have installed VMware Server on my windows server 2003 64-bit want to give it a go...
The server itself is a Dell Vostro 410 with a Quad Core cpu and 8 GB of ram.
Im getting the error "There are not enough licenses installed to run the operation." after passing by the web wizard and make a virtual machine and try to start.
When I click on the link ' power on ' this message appears as the error immediately detailed.
The server runs a student version of windows serv licensed 2003 (if that makes a diff).
I want to install Suse Linux 32
By Googling I found im not the only one getting this error, but I couldent find all the solutions related to this and not of ESXi.
Hope, one of the yall know what happens
Thank you
CJ
Try to install the downloaded file with the serialnumer you get!
-
I disabled the fast user switching, but why it happened
maxxer09,
Looks like you have not enough memory the amount of RAM you have as well as hard disk space. Please rate me upward if you find my post helpful. Thank you!
-
At the opening of my slide show program he says there is not enough space on I: but I: is an external hard drive. Why is it not open c: I have used before with no problems. Is there a way to force it to open it on my computers built in the hard drive?
Hello
1. what Slideshow program do you use?
2. you try to open a slide show file or the program itself?
3. If you try to open the file, then where is it?
4. have you made a recent software or hardware changes to the system?
If you are trying to oepn the file, then you can try to copy the file to the desktop and check if it helps.
-
We try to upgrade Vista Home Basic on an Acer Windows 7, but does not because there is not enough space on the hard drive C. I have another drive that is empty, hard drive called D data and will not go to it. What I can do. I just spent $ 125 for this upgrade. Thank you
original title: try to upgrade to Windows 7Hello
you are posting in the wrong forums
These are some Vista Forums
You can read this information to see if your machine is compatibile Windows 7 and repost in the correct Windows 7 forum (link below)
so eager to upgrade to Windows 7, it will depend on if the manufacturer of your computer/laptop has windows 7 drivers available for your computer/laptop as to whether Windows 7 will work properly on your machine
check with them
and read this
Windows 7 upgrade advisor
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15
Windows 7 system requirements
http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements
Windows 7 upgrade paths
http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx
_____________________________________________________________
and the link below is to an instance of installation of Windows 7 for any other questions about the installation of Windows 7
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all
-
iPod cannot be synced because there is not enough space
I just got a new computer and I tried and tried to sync my ipod touch, product type is: Ipod 3.1. and iOS 5.1.1. on the new computer. I have all the songs from the old computer and their transfer to the new computer, but I get the error message "Ipod cannot be synced because there is not enough space to hold all of the items in the itunes library (like 55.88 GB required). This computer now has a lot of hard drive to contain this music, and my ipod has a capacity of 57,92. Now, if I think right, it's almost an ipod everything! I'm so confused by the present. I have not added a lot more music. Please explain and help me understand what I need to do to get my ipod to sync. I tried to reduce the bit rate only to get the error saying that I need extra GB 38.65. What happens here? Help, please.
Now, if I am not mistaken, the songs that you have in the itunes application, is what gets synchronized, I have additional music in other folders, but I don't have them uploaded to the app. Are they still in the library? Please help me not to be confused on this issue. I greatly appreciate it.
Thanks for any help you can give me.
Steve
You try to synchronize too much media to iPod.
Verify that synchronization of the settings
iTunes: synchronization of multimedia content for iPod and iOS devices
Try the synchronization using the manual method
Managing content manually on iPhone, iPad and iPod
You can synchronize only with a computer. To move computers
Synchronization to a 'New' computer or replacing a hard drive "crashed": Apple Support communities
If all the media synchronized music and apps are already in the iTunes library of the new just backup on iTunes computer and restore from this backup.
iOS: backup and restore your device iOS with iCloud or iTunes
-
Original title: I get a "not enough space on the disk for the snapshot" msg... whart is a "cliché" how much space do I need? 1. on the drive, I'm backup? 2. the disk I'm backup to?I can't do a backup. the msg I get is:"Cannot create a shadow copy for the following reason.""There is not enough space on the disk (08 x 80070070).that is exactly a "cliché"?How much space do I need?1. on the drive, I'm backup?(I have 3,41 GB free on 224gigs)2. the disk I'm backup to?(I have 636 concerts!)Thanks for any clarification you can give,justFranc
Hello
1. what operating system is installed on the computer?2. you have any third-party backup software installed on the computer?
Start the shadow copy volume service and see if the problem persists.
a: click Start > run
b: type Services.msc in the start search box and click on enter.
c: Are now looking for a shadow copy volumeservice, double-click it to open it.
d: make sure that the Service is started and set to Automatic.
Shadow copy is a technology included in Microsoft Windows that allows taking manual or automatic backup copies or snapshots of data, even if it has a lock on a volume that is specific to a precise moment in time on regular intervals.
There should be more space on the backup destination media to take successfully no matter what data should be backed up from the source backup media.
Hope this information helps. -
I have a couple of server 08 R2 machines where the P to V conversion fails. I did some research and the problem seems to be related to the system reserved Partition that has 0% available 100 MB free space. Conversion fails with the error below.
VSS snapshots cannot be stored because there is not enough space on the source volumes or because the source computer has not all NTFS volumes. Error code:
2147754783 (0x8004231F).Someone had this problem and came to the top with a solution or to get around?
Thanks in advance
Guessed it. My snapshots Appassure did not also exist with a similar error, so that's what I did to solve it. My servers now converted without any problem.
- Open disk management.
- Look at the partition of the PRS and see if it is 100% full.
- If Yes, proceed to step 3.
- If this is not the case, check if there are readers who have no more of 300 MB free (minimum requirement to use VSS).
- Click a drive, select properties and then select the instant snapshots tab.
- Ensure that all shadow copies are disabled and no limit on all players.
- Go to the partition of the SRP and assign the B:drive letter.
- Open the B: drive via disk management, and then locate the folder System Volume Information. Note: if necessary, change the folder options so that you can view hidden files, folders and drives.
- Right-click the System Volume Information folder, and then select Properties.
- On the Security tab, click Edit, and then add the group with full control everyone in the folder.
- Open the System Volume Information folder (you should see log files are full), open a running as an administrator command prompt and then type the following commands to unload the filter driver.
- B:
- B:\>FLTMC UNLOAD AAFSFLT
- Navigate to the System Volume Information folder, and then type the following commands:
- B:\>CD System Volume Information
- B:\System Volume Information > AALOG_ DEL * (this will remove all of the log files, and then re-create a new)
- B:\System Volume Information > CD\
- B:\>FLTMC LOAD AAFSFLT
- Close the command prompt window.
- In Windows, right click on the reserve system folder and remove the Group everyone.
- In Disk Manager, remove the B: drive (and click Yes when prompted with a warning window).
-
Try Powershell Copy-Item, get the message "there is not enough space on the disk.
I'm using Powershell 2.
I'm trying to copy a file, not very complicated.
Copy-item D:\Outgoing\tsc.sqb D:\Incoming
I get this:
Copy-Item: there is not enough space on the disk.
On line: 1 char: 10
+ Copy-item< d:\outgoing\tsc.sqb=""> >
+ CategoryInfo: NotSpecified: (:)) [Copy-Item], IOException)
+ FullyQualifiedErrorId: System.IO.IOException, Microsoft.PowerShell.Commands.CopyItemCommandIf I replace Copy-Item by Move-Item, everything works fine. I didn't ' t want to move the file, however, simply copy it.
Any ideas? Files is 230 KB or more.
Hi BarryFreeman,
You can ask your question in the TechNet next to all the script help forum:
http://social.technet.Microsoft.com/forums/en-us/categories/
-
Not enough space available on the disk without title
Every time when I trie to install any creative cloud application, I get an error "not enough space available on the disk untitles-(30). There is no disc titled untitled and there is enough free space (50 GB).
It happens on my Mac Mini and Mac Book Pro. The only similarity I can find, is that they have both a Kingston custom 60GB SSD.
Does anyone have a solution to this problem, I already tried to change the location of installing a HARD drive.
You're right, this isn't a problem downloading.
It's a lack of space in / tmp (or/private/tmp). It is a silent place to stash huge to download files, but moving on... It's an easy fix.
If you're set up with an SSD a popular board 'longevity' is the tmp in RAM or elsewhere to save some wear and tear.
In expression, type "df - kh", if you see/private/tmp anywhere under "mounted on ' and the 'result' is not large (several concerts I assume), there is your problem.
The most popular advice ramdisk (can not find the link right now) is to place a startup item to do this job and name "RamFS" or/System/Library/StartupItems/RamFS. Move it out or chmod 000 it temporarily, restart and install. You can replace the StartupItem subsequently (and restart).
-
Hi all:
I added two esx servers in my vc received the error: there is not enough licnese installed to run the operation.
There are some servers esx with correct license file in VI3.5U3 in my environment. I want to add more than two servers esx with evaluation mode in this virtual Center. I got error.
connection to the esx server directly without vc, to feature license tab, I selected evaluation mode is ok. but I can't added these in vc. Why?
can someone help out me.
Thank you very much.
hihiy
I don't think you can, you need to turn your TC to eval too, and before we do, your VC should not exceeded calclation eval of 60 days from the first day, it has been installed.
BTW, since you have valid VC 2.5 license, and is not the Foundation of VC, why don't you showing your ESX with eval license server to license? Add then the two ESX to your existing VC?
vcbMC - 1.0.6 Beta
Lite vcbMC - 1.0.7
-
Not enough memory is available to complete this operation
Hi I have a problem with reading the data of Access database. If I want to analyze a product these datas on 6 months, for example, I got the message error "not enough memory is available to complete this operation"
The line of code that makes this error is
"aValues = RecordSet.GetRows (-1, 0, aColumnNames).
I have 1 GB of RAM on my PC but I also tried on PC with 2 GB of RAM it does not help.
Is this a problem with the Microsoft MDAC? I work with Win XP SP3 and MDAC 2.81 SP1.
I have no idea more wa could be the reason...
Someone has an idea or the same problem?
Best regards
Hi Suttema,
I would like to try a request for Recordset buffered, instead of asking all records at once. See if this example helps.
Brad Turpin
Tiara Product Support Engineer
National Instruments -
Error 0 x 80070718 not enough quota available to process this command to rename photos
Original title: Hello... I am having trouble renamining my photo files & get error message
Hello
Follow the link below and check if that helps.
http://support.Microsoft.com/mats/windows_file_and_folder_diag/
Maybe you are looking for
-
for example. I put the search bar to open in a new tab, why can I not open in a new window? Why don't I have an option to use windows only? 1 tablet is 1 window. Why fascism? Why why why? < / rant > Thanks in advance for the help. Please take my rage
-
Firefox is the only browser that allows me to connect with my microphone. I need to use this feature for an online class. Earlier tonight, the message invites me to grant or deny permission to site class to use the microphone stopped appearing and wi
-
Hard drive full 1 (305) for HP dv6tse CTO 3000
I understand that I need to replace my hard drive, but wanted to know that, does my laptop Model(Product I'D VX067AV) SSD SATA II disks supported? I plan to replace my HDD with a Kingston SSDNow V 64 GB 100, also can you please give me a detailed gui
-
blackberry application profiling
I have an app that works well on a simulator. When I try it on a real curve it misfires and does not respond to keystrokes correctly. Is there a way to profile an application, namely where it wasting time on a Blackberry? Thank you Gerry
-
HelloI try to access a web page API in the APEX, but still get an error in the ACL. I tried everything I can think of as well as the multitude of usual information "bits and pieces", which I found on the web.USER who needs access to the ACL and the