HARD drive toshiba px1267e - 1 g 32 does not

Similar Questions

• do I pay my device external hard drive toshiba properly installed but that does not appear in my computer?

  do I pay my device external HDD toshiba usb 3.0 installed correctly but that does not appear in my computer?

  Hello

  Please post your question on the French forum.  Thank you.

  http://answers.Microsoft.com/fr-FR/Windows/Forum/hardware?TM=1366324404146

• When I plug my portable hard drive to the usb port it does not read and display the contents...

  When I plug my portable hard drive to the usb port it does not read and display the contents...

  Hi deaza,.

  Ø Have you connected the USB hard drive to the computer directly or you have used an external USB hub to connect?

  O trying to connect to another USB port to check if it works?

  O the hardrive shows in windows of the computer when you connect it?

  Method 1:
  If you have installed security software, I suggest you to temporarily disable the security software and connect the USB and check to see if the same problem happens. Make sure that you enable the security software after checking.

  Alternatively, you can try to plug the USB key into a different USB port and check if it helps.

  Method 2:
  I suggest trying to launch hardware and troubleshooting of devices and check to see if it helps, here is the link:http://windows.microsoft.com/en-US/windows7/What-to-do-when-a-device-isn ' t-installed-correctly

  Method 3:
  If this does not help, then follow these steps:

  (a) remove all your USB devices. Use the safely remove the feature to turn them off.

  (b) open Device Manager and navigate to the section for USB. Uninstall all USB drives. There should be one for each USB port, and then restart.

  To open Device Manager, go to the link below and follow the steps:

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  (c) Windows should re - find all of the devices. If it is not the case, note the error message and let us know.

  You can also navigate to the link below and follow the steps to install the USB device.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I started the OS from a backup hard drive. Now My Adobe products does not work. "licensing does not work for this product" error code 150:30. Help me please!

  I started the OS from a backup hard drive. Now My Adobe products does not work. "licensing does not work for this product" error code 150:30. Help me please!

  Reinstall the software correctly. Migration / backups do not work due to the specific requirements of the activation system.

  Mylenium

• My hard drive has been replaced, now PE does not work!

  My laptop was having problems, which ended in my motherboard and hard drive being replaced. Before doing so, I basically copied my entire hard drive to an external drive. I copied everything then back on my laptop with its new hard drive, but now when I try to open PE it tells me to uninstall and reinstall. The problem is that it is not technically installed on the new hard drive! I have no way to uninstall it! What should I do to get it working again?

  More information:

  It's first Adobe Elements 9.

  I use Windows 7.

  I have no access to my old hard drive (just what I copied on the external drive to backup/storage).

  Given that I copied all of the hard disk, the program and everything with it's on my new, but I can't figure out how to uninstall or reinstall.

  (I have the same problem with Photoshop CS3 Extended, if anyone can help me with this too.)

  You will need to work around the problem that it won't let you not uninstall first. You may need to go through the instructions to remove manually, here - http://helpx.adobe.com/photoshop-elements/kb/manually-remove-photoshop-elements-9.html.

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

  If this post or by post from another user solves the original problem, please mark as correct and/or useful messages accordingly. This helps other users with similar trouble getting answers to their questions more quickly. Thank you.

• Hard drive from old mac 10.8 does not open

  Old mac external hard drive (10.8) will not be open to users on new Macs using (10.11.4).

  If the drive is mounted, you can do a right click on the drive icon, choose "Get info". "." Unlock the settings by clicking on the small lock icon. Check "ignore ownership on this volume".

• New hard drive installed on Portege M200 but does not start

  I upgraded the hard drive in my Portege M200 from 4 GB to 80 GB using Parted Magic to clone the original disc. Cloning complete successfully, but instead of starting with the new drive, the M200 simply display a blinking cursor when turned on. Any help is very appreciated.

  TIA, update

  Hello

  Maybe you can try one of the below to solve your problem:

  BUT! ALWAYS keep a backup!

  Boot the system with a flexible BACK (with fdisk.exe inside) to restore the MBR by typing

  FDISK/MBR

  This works even on a SATA drive. Start alternative all Win2k or XP installation CD, go to the console command and issure of recovery

  FIXMBR

  See you soon

  Tom

• USB port recognizes the location of my external hard drive as F:. Why it does not recognize in the correct order as E:?

  This question is requested based on certain issues I'm having with the Zune software. specifically in the software of pointing to the correct location for listening to music I own that was torn through CD. Currently, all the added music in this way shows the location of each song as E: in the properties of the song. I went back to the score zune software to the right location (for example settings-online collection => by adding the name of the place where the music.). The negative result is that I can't play full songs for music I own. Instead, Zune software plays the second.30 preview for each. Is this a problem of Zune, Vista or Western Digital external drive problem? Why Vista would recognize the location of the reader out of sequence. Please notify. Thank you

  Hi Freddie,.

  You can try to change the E: drive letter and check.

  For more information, you can consult the following article:

  Change, add, or remove a drive letter

• volume level missing meter after accident and install new hard drive. The volume level indicator does not display when I raise or lower the volume. How to show again?

  volume meter

  Hello

  You have reinstalled the drivers for your audio card yet? Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Installation of Vista on the new hard drive was interrupted, and now I can not start the computer

  So I decided that I need a bigger hard drive. I got a 500 GB hard drive, so I have it PLOPPED in my Acer Aspire 5517 with my vista boot drive, turned on and began to go through the process. Once he got to the phase 'installation complete' it seems to take a while, so I let it run all night. Once I got up, it was on a black screen with the mouse, I let stand a few more minutes but still nothing. I turned off and started it expects to find to return at the beginning of the installation, but instead he began to start from what is on the hard drive at this time. It got to the screen with the loading bar and the sign 'Microsoft Corporation'. The loading bar was very frigidity and stopped and started randomly. I let it do this while I went to school, but when I got home, it was always the same loading screen. I rebooted and tried to start in safe mode, but when I do it it stops at crcdisk.sys, and never forwarded charges. I tried to do the reset thing factory start it but that doesn't seem to work. My other puny hard drive still works, but the other does not. I searched the internet but have not seen any other problem like it. I want to just start completely clean of my new 500 GB. Please help!

  Hi James,

  1. What is the number of brand and model of the hard disk of 500 GB?

  2. How did the 500 GB hard drive connected to the computer? It is external or internal?

  To troubleshoot the unable to start the issue to cause corrupted driver, some files that can not be loaded during the startup process must be fixed or restored. So, let's check the disk by using the Windows Recovery Console.

  (a) put the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD ".

  (c) select a language, a time, a currency and a keyboard or another input method, and then click Next.

  (d) click on repair your computer.

  (e) (click on the operating system you want to repair), and then click Next.

  (f) in the System Recovery Options dialog box, click command prompt. Type chkdsk c:/f to try to correct the errors.

  (g) Note: answer them when chkdsk asks you if you want to check the disk next boot Vista

  (h) after the recording of the disc, and then run sfc/scannow to check the corruption of system files.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Check out TechNet help links and check if that helps:

  The computer starts stops at crcdisk.sys

  Help! Vista won't start... (crcdisk.sys)

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Hello

  Check with Toshiba support, online documentation and drivers (update or reinstall), and
  ask in their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  How to activate Audio devices hidden in Vista and Windows 7
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer (you want to be sure
  the mic input is enabled)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  -----------------------------------------------------------------------------------------------------------------

  Pilots may also need to be updated:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
  Audio (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

• Toshiba 40 HL 93 R does not remote or and door panel

  Hi all.
  My Toshiba 40 HL 93 R does not remote or and door panel.
  I guess the TV is blocked or immobilized because remote is 100% functional.

  How can I unlock TV? Combination or other. I can't find anything in the manual of the TV

  I put t think that the TV is locked... to my knowledge, it is possible.
  You can block single channels setting a password, but this does not affect other functions of the TV.

  Disconnect the TV from the food sector and wait a little crisper.
  Connect the TV to the network, then press power button to power ON the TV

  It work?
  In case it doesn't, you should contact the service point because it seems that your TV equipment is affected.

• Toshiba accessibility TACSPROP (Fn keys) does not work on my Satellite A100

  Laptop A100-097

  I am facing a problem with the extraordinary on my keyboard * FN keys * managed by program "* TACSPROP.exe*" which is located in *C:\Programmi\Toshiba\Utilities\.*
  This program does not start automatically at startup and if I manually run his way a window is also come say * "Questo sistema non Può utilizzare Toshiba Accessibility" * (in Italian: "" * cannot use this system Toshiba Accessibily * ' ").

  I can't identify the installation program appropriate for the program in the list of drivers that you provide support download page, but I can tell you that the program is in the same directory where the Software * Hardware Support * is installed.

  Please, can you provide me with the Setup program for this program? I think I'll have to try put it back.
  Is it possible, that it has been marked as a Spyware of Vista or AVG? Maybe some windows update changed something...

  Help, please!

  Thanks in advance

  Hello

  These types of problems are very strange to me, and I wonder why this happen. The fact is that the recovery image (recovery DVD) is very well set up and there is absolutely no problem with the use of the FN keys. All these functions of FN keys are tested and it should work. All the necessary services will begin with OS and you must be able to use all the key functions of the FN.

  I don't want to speculate what the problem is here, but I can't imagine you have this problem on the first day.

  Now the question is: why is that you get? Using the factory preinstalled OS or you have installed your own version of the OS?

• My space free icloud is full, so I want to download all my files on my Mac and use a hard drive instead of icloud. I'm not happy to pay to store my files in icloud. How can I do this?

  My space free icloud is full, so I want to download all my files on my Mac and use a hard drive instead of icloud. I'm not happy to pay to store my files in icloud. How can I do this?

  Welcome to the Apple community.

  Locate in iCloud drive in your Finder, drag to where you want to save them on your Mac, confirm, you want to move them when the Finder prompts.

• I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system?

  Resettlement without disks

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  You have a hard drive partition to do - but you would need to contact/see the FAQ from the hardware manufacturer (HP, Dell, Gateway, Lenovo, etc) to see if and how.

  Otherwise - you might have to order (pay for possibly) the factory restore/recovery of the value of the manufacturer.

  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?tag=nl.E539

  If it was built * friend *, you will communicate with them.  Ask your media.