hardrive crash after pressing update dump

Similar Questions

• IBooks on ipad pro crash after IOS updated with 9.3.1.please

  IBooks on ipad pro crash after IOS updated with 9.3.1.please

  I have the same problem after update 9.3 OS on my Ipad 2... Crashing in IBooks. PDF and missing books. I have access to my books for about a minute before it crashed.

  It still occurs with the 9.3.1 update.

  I don't really know where to go then except put it there the 9.3.1 upgrade did not fix my problem.

  Thinking that I might have to consider for an Apple Tech which is an expense I really don't think I should have to bear, because I did not cause the problem that everything worked fine with my iBook before upgrading the OS 9.3.

  Thank you

• XP crashed after auto update

  XP crashed after auto update on asus netbook. No recovery method does work it IE safe mode, last known config, bootlogging etc. Systems freezes at \drivers\mup.sys

  
  «.. . We have revised the installation packages for MS10-015 with new logic that prevents installation on systems if there is certain abnormal conditions of the security update. These conditions may be the result of an infection by a computer such as the Alureon rootkit virus. If these conditions are detected, the update will not install, and the result will be a standard Windows Update error. If a user receives this error, they should go to the following landing page for additional help:

  http://www.Microsoft.com/Security/Updates/015 "

  Source & more: http://blogs.technet.com/msrc/archive/2010/03/02/update-ms10-015-security-update-re-released-with-new-detection-logic.aspx
  

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Laptop Presario CG56: CG56 crashed after Windows Update

  After Windows update, set during the race, woke to find a "scree Orange" with the logo of Compaq.  Press F11 to enter in recovery mode has organized the restoration of the system for each restore point.  Finished with 0x8000ffff.  A ran the recovery system completely at the end.  Finished with the Orange screen.  Minimized ran impage recovery all the way to the end.  Repeat screen Orange.

  I find that the BIOS is corrupted in Windows Update, somehow.  I can get to the line of command in recovery mode, but I don't know what to do.

  Help!

  Me am HP Advanced System Diagnostics V3.0.3.0 by pressing f2 until the screen has finally come.  Do you have the System Diagnostics.

  Have you hard reboot by removing the battery, press the button for 15 seconds, extra power, hit start and the start up like a new PC was started and Windows.

• Windows 7 RC crashes after installed updates. Initial Setup works fine.

  Everyone knows about system crashes after installation of microsoft after a successful Windows 7 updates installed.  I would like to point out that the installation of the operating system is going very well and there seems to be no problem, another that I have a found unknown device that is not described here until you go into system properties.  When the windows update notification is in place there are usually 7 updates important and 36 optional updates.  Optional updates include drivers for the video card and other drivers and also a Toshiba ACPI value-added product for the General and logical devices.  I don't know what it is because I can't find any information about it.  It is not really important at this stage because everything hangs!  I had this problem since the beta version and it is still not resolved.  I have read and tried to fix this with "accidents of the Explorer of windows 7 after update" using the Microsoft fix by regedit keys.  It did not work.  I also tried various updates one at a time to see if it has an impact, without success.  I tried to go to the Toshiba website for updates, but so far there is none.  I continue to read the forums and also sent food to Microsoft beta on this problem.  Someone can help me.

  System Specs:
  Toshiba phone L355D-S7829
  AMD Turion x 2 dual core mobile RM-72
  4 MG RAM
  ATI Radeon 3100 Mobile graphics card Shared
  Dual-boot system: Vista 64/Windows 7 (64-bit) RC

  System works fine on Vista and as long I don't upgrade anything, Windows 7 works very well.  Software installs works very well as long as they do not require a video card update.  I tried to use the video driver for Vista and it still crashes.

  If I can offer any other information I can be set aside, please let me know.

  Thank you!

  James

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Above is the Windows 7 Forum.

  These Forums you are in are to help posters with the problems of Vista.

  Windows 7 questions should be directed to the place that above.

  See you soon. Mick Murphy - Microsoft partner

• Windows crashes after security update

  My computer does not restart after the update (as of 09/02/2011).  It tries to start, gets a blue screen of death, and then try to restart again and it never comes.  I put the recovery disk in and restore an earlier version of bring back the computer.  I turned off automatic updates and is not happy.  Can someone let me know what the problem is with this update?

  When it is appropriate to re-download the same security updates, I chose to not. We'll see how things are going.

  See this response archived from a previous thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/2a81610f-07b9-44A0-BC24-457fd7ff39b2>

  Let us know if this helped.

• Firefox keeps crashing after Lollipop updated on HTC a M8. Do not even open!

  After upgrading my firmware/software to the new Lollipop OS, Firefox crashes. I tried to uninstall and reinstall directly the Googe play store and still nothing. When I click the icon of Firefox the browser opens and then I immediately get a notification "we're sorry, Firefox crashed. How can this be addressed? I downloaded Dolphin browser and could not return to Mozilla unfortunately if this continues...

  Hi again, the update for firefox 36.0.2 addressing the crash to start on your device should now be available in the google game store.

• Internet Explorer and Firefox, both crash after installing update KB2670838

  After installing Win7 x 64 platform update KB2670838 (as recommended) no browser would go, V19.0 Firefox and Internet Explorer V9.0.13 (32 and 64 bit) would all the crash initially upwards.

  Other programs, I tried that internet access would go directly without problem.

  Be able run any internet browser, I had to uninstall KB2670838.

  What is the problem with browsers, internet and KB2670838?

  I solved the problem of Firefox after installing IE10 by opening Firefox in Mode safe mode and disabling hardware acceleration (how to in my previous post), have not had any problems with Firefox because I have disabled hardware acceleration.

• 7.6.0.105 Skype crash after forced update.

  So Skype auto just updated for me and whenever I try to open Skype it opens then crashes immediately.

  I tried to uninstall and reinstall

  restarting the computer but the same result... it doesn't let me do anything just, it hangs at startup

  Uninstall CyberLink YouCam. You have and old version 2.0 installed.

  If you will not be able to uninstall this application using Control Panel-> programs and features, you can make use of this tool VCamFix:

  http://community.Skype.com/T5/Windows-desktop-client/Skype-6-2-crashes-whenever-webcam-is-activated/...

• Brand new computer laptop dv6z-7200 of envy has crashed after downloading updates from the window 27. ~

  I have a new notebook from dv6z-7200 desire I'm just to start this topic and it locked up and crashed. I restarted in test mode, it and ran the tests got an ok on everything. Then, I got a message saying that he would attempt a repair. Unfortunately, who did not, now he broke down again and I can't seem to do anything.i let windows update download 27 updated both swing myself for this. I think I should have downloaded one or two at a time, and then a reboot. now what should I do?

  I used to be snow white, but I drifted...

  Thanks for the reply. F11 does not work. laptop does not just start. try, but crashes. I disconnected and removed the battery for 30 seconds, replaced, tried again. nothing.  restoration will not be a big deal like it was brand new and I have had little on what anyone on this subject yet. you contact HP support. Thanks again.

• Illustrator CC 2014 crashes after one update fails through creative cloud

  I've installed Illustrator on my Mac OS X 10.9.5 and it worked perfectly.

  When I decide to update the update is not complete and see the Illustrator these debug message once I start it:

  Process: Adobe Illustrator [780]

  Path: / Applications/Adobe Illustrator CC 2014/Adobe Illustrator Illustrator.app/Contents/MacOS/Adobe

  ID: com.adobe.illustrator

  Version:?

  Code type: X 86-64 (Native)

  Parent process: launchd [267]

  Responsible for: Adobe Illustrator [780]

  User ID: 501

  Date/time: 2014-10-12 15:48:40.795-0300

  OS version: Mac OS X 10.9.5 (13F34)

  Report Version: 11

  Anonymous UUID: D8937F5A-34D2-BE19-42C5-C1F87559B0B0

  Crashed thread: 0

  Exception type: EXC_BREAKPOINT (SIGTRAP)

  Exception codes: 0 x 0000000000000002, 0 x 0000000000000000

  Request for clarification:

  dyld: launch, loading of the dependent libraries

  Dyld error message:

  Symbol not found: __ZN5dvaui2ui12UI_Container14SetSkinSetNameERKSs

  Referenced from: / Applications / Adobe Illustrator CC 2014/Adobe Illustrator.app/Contents/MacOS/... / Frameworks/dvaworkspace. Framework/versions/A/dvaworkspa it

  Expected: / Applications / Adobe Illustrator CC 2014/Adobe Illustrator.app/Contents/MacOS/... / Frameworks/dvaui. Framework/versions/A/dvaui

  in/Applications/Adobe Illustrator CC 2014/Adobe Illustrator.app/Contents/MacOS/... / Frameworks/dvaworkspace. Framework/versions/A/dvaworkspa it

  Crashed thread: 0

  
  

  Exception type: EXC_BREAKPOINT (SIGTRAP)

  Exception codes: 0 x 0000000000000002, 0 x 0000000000000000

  Request for clarification:

  dyld: launch, loading of the dependent libraries

  Dyld error message:

  Symbol not found: __ZN5dvaui2ui12UI_Container14SetSkinSetNameERKSs

  Referenced from: / Applications / Adobe Illustrator CC 2014/Adobe Illustrator.app/Contents/MacOS/... / Frameworks/dvaworkspace. Framework/versions/A/dvaworkspa it

  Expected: / Applications / Adobe Illustrator CC 2014/Adobe Illustrator.app/Contents/MacOS/... / Frameworks/dvaui. Framework/versions/A/dvaui

  in/Applications/Adobe Illustrator CC 2014/Adobe Illustrator.app/Contents/MacOS/... / Frameworks/dvaworkspace. Framework/versions/A/dvaworkspa it

  Model: MacBookPro9 2, MBP91.00D3.B08 of BootROM, 2 processors, Intel Core i5, 2.5 GHz, 8 GB, MSC 2.2f44

  Graphics card: Intel Graphics HD 4000, 4000, Intel HD graphics card integrated

  Memory module: DIMM0/0 BANK, 4 GB DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020

  Memory module: DIMM0/1 BANK, 4 GB DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.98.100.22)

  Bluetooth: Version 4.2.7f3 14616, 3 services, 23 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en1

  Serial ATA Device: APPLE HARD ST500LM012, 500,11 GB disk

  Serial ATA Device: HL-DT-ST DVD - RW GS31N

  USB device: Hub

  USB device: Samsung STORY Station

  USB device: Hub

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  USB Device: IR receiver

  USB device: Apple keyboard / Trackpad

  USB device: Hub

  USB device: FaceTime HD camera (built-in)

  Bus crush: MacBook Pro, Apple Inc., 25.1

  
  

  I tried to trash the folder Adobe Illustrator Application but without success.

  w,

  You could try to reinstall using step three way:

  Uninstall, run the cleanup tool and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• What is 0 x 80070002? Win Vista crashed after the update was automatic.

  We use so-called win vista with SP2.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  Windows Update Error 80070002

  If you receive the error Windows Update 80070002 of upgrades, you must delete the temporary update thatWindows uses to identify updates for your computer. To remove temporary files, stop the Windows Update service, delete the temporary update files, restart the Windows Update service, and then try to check for Windows updates again.

  If the above does not resolve the issue, please repost in the appropriate Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 crashes after downloading updates.

  When myspace on computer running internet' freezes at random, does not freeze during execution of game world of warcraft as long as Internet MySpace running a beta app when frozen I type alt/tab and there will be 3 or 4 other screens that I didn't not visit or implement. no idea what is the cause. any help would be greatly apreciated. my computer is only 4 days old. Ty

  MySpace runs an application in beta

  Maybe it's the application in beta you run that is causing the problem.

  What information to post in the Windows Update forum
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395
  TaurArian [MVP] 2005-2010 - Update Services

• Mercury playback engine gives first crash after cs6 update

  Hi there everyone,

  I worked with Premiere cs5 for over a year without serious errors. As I improved all of the Creative Suite to cs6 however, I have to use the software method of reading rather than the GPU accelerated one. Using the causes mentioned last creation to plant immediately when you try to drag any kind of video on the timeline. This happens in new projects as well as in cs5; and all the images in both cases was ingested in the codec wellknown Matrox i-frame that has always worked before. Data sheet:

  Windows 7, 24 GB of RAM (not sure if DDR3 or 5), NVidia Quadro 4000, dual six-core CPU, several terras HD at 7200 RPM, Matrox MX02, CS6.

  I tried all possible combinations and the order of the uninstall to reinstall first, drivers Matrox and nVidia drivers, including older versions of the last two mentioned, but nothing helped. Although it looks like an NVidia problem (I read somewhere about CS5 and 5.5 certified NVidia drivers but not CS6 yet) this problem manifested right after the upgrade to CS6.

  The error reported is on the graphics card being reset, it stops and then straightens up, leaving the first to hang. The card hardware reacts with a cooling and noisy acceleration in his fan who returns to his normal diet slowly.

  -Sigh - I'm sorry to bother you with this, but is - that someone has an idea or experienced something similar? Is the combination of the elements mentioned ring a Bell...?

  Any help is appreciated quite!

  Click Show details on the announcement at the top of the page or go here: http://www.adobe.com/go/wish

• HP Photosmart C5100: hp c5100 grave Solution Center crashes after windows kb3132372 10 update

  Solution Center crashes after Windows update KB3132372 10 (December 29, 2015).

  The Windows Device Manager shows not installed printer as on a regular basis.

  Printer will print but scanning is very heavy and the ink levels will not appear.

  Uninstall and reinstall will not work.  Software will work properly only if Windows update is uninstalled.

  Is there another solution for this?

  Hello

  Microsoft has since released a new update for this problem.

  Fix solution:

  Please download and install the following update KB3133431 from Microsoft:

  https://support.Microsoft.com/en-us/KB/3133431

  Note This update is available through Windows Update only. (Updates )  must be lit)

  1. Click the Start button, select 'Settings' and select 'Making day & security'
  2. Under "Windows Update", select "Advanced Options".
  3. Under "Choose how updates are installed," select "automatic (recommended) in the drop-down list in the menu drop-down."

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement