hardware device after installing daemon tools tsstcorp l633c driver does not it appers unrecognized

Similar Questions

• After installing windows XP Pro my computer does not start correctly

  After you have installed Windows XP Pro on my HP Pavilion (updated to XP home), my computer will not end the restart process.  I have repeatedly in a loop once the blue screen with the HP logo.  When this has happened before after installing a pack of updates for XP Home, we just started in safe mode and then had it will restart at an earlier time, thus eliminating the updates.  However, now when I try to start in safe mode, I get an error message that says: "Windows Setup cannot start in safe mode" and I leave safe mode.  We hoped that by installing Windows XP Pro, this problem should go away.  Can anyone help?  I have read several other entries in the forum for similar problems, but they all have to do with updates.  This is the first time I was not able to use safe mode, so now I'm stuck.  I hope that I can avoid having to perform a full system recovery, since it is a long involved process and having once before, I always felt the same restart problems after installing updates.

  PA bear,

  Thank you for help... After reading several posts in the forum, one of them reminded people to check with the manufacturer of the computer so that possible solutions... and this is the solution here, I wish I thought of him earlier... I did a system recovery to remove the Windows HP Pro and return to the original version of the default value.  Then I went to the HP site and downloaded the patch according to their directions.  Problems fixed! :-)

  Any PERSON HAVING HARD REBOOT YOUR HP PAVILION (with an AMD processor) after you install Windows XP service pack 2 or 3 updates:

  HP has a patch that solved all my problems.  Clearly, service packs contain information for Intel processors that is in conflict with AMD processors in many HP Pavilion desktop computers.  You can go to their customer service solutions website and download the patch.  Since I did it, I had no other problems. I wish just that I had discovered the solution until I had to do a full system recovery.

  If your computer hangs on reboot 'loop', see if this info. HP will help you:

  The computer restarts after a Stop error message display 0x0000007E (after update with Service Pack 3 for Windows XP)

  If you have had problems with XP updates, including service pack 2 or 3, try this page:

  Before you install Windows XP service pack 3

  Please pass on to other similar issues.

• After installing the Vista SP2, IE 8 does not work well.

  After installing Vista SP2, IE 8 under my.live.com does not work.  The pages do not FLOW RSS download, links on the page at the top are not active and usually IE has out crapped.  I went to run a complete Internet security suite uninstall Trend Micro and put it in a plain Jane anit-virus program.

  I would like to keep the functioning of IE8, but switch to FireFox, if I need to see my RSS STREAM or do some serious web browsing.

  In addition, Live Messenger is no longer connect either.

  Is there a way I can safely roll back my system to SP1?  I can't live without Vista SP2.

  Hi Geekster,

  Please use the forum for Support of Vista,

  IE 8 is not a part of Vista SP2.  You can remove SP2 without removing IE8.

  Here are the steps to uninstall SP2
  Method 1: Uninstall the service pack of Windows Vista by using the programs and features item in the easiest control panel to uninstall a service pack for Windows Vista is to use the programs and features in Control Panel. To uninstall the service pack of Windows Vista by using the programs and features in Control Panel, follow these steps:

  1. Click Start, type Appwiz.cpl in the Start Search box, and then click Appwiz.cpl in the programs list.
     If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  2. Click view installed updates.
  3. Click the service pack that you want to uninstall, and then click Uninstall.

     If you don't see the option to uninstall for Windows Vista service pack in the list, go to method 2.

  4. Follow the instructions that appear on the screen to complete the uninstallation.

  If method 1 does not allow to remove SP2, try different method in this article:
  http://support.Microsoft.com/kb/948537

  Let us know if this helps,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Tecra 9000: After installation of SP2 Yamaha audio driver does not work

  Hello

  I have a Tecra 9000, with a Yamaha AC - XG sound card.
  The problem is that since I installed Windows XP with SP2 included, I lost my sound.

  I also know that Toshiba is aware of this situation and they managed to post a solution for this. I tried this solution:

  Detail:

  Yamaha AC - XG driver used the PortCls function to check the version of the operating system. XP Service Pack 1, PortCls function is changed, while the Yamaha rider cannot get operatingsystem version correctly. The operating system provides the Windows 95 version. This is why the operating system has a blue screen. That's why Microsoft has added that the solution and the clandestine drivers cannot work on SP1. This problem also happens to Windows XP SP2.
  Yamaha provides already the fixed driver Toshiba. The fixed driver version is the following;
  yacxg.sys 6.13.10.2152 with software synthesizer
  yacxgc.sys 6.13.10.3152 free software synthesizer

  How to solve this problem:
  Install the fixed driver on a system before and after the installation of Windows XP Service Pack 2.
  Install as follows:
  (1) unpack a file attached to your hard drive.
  (2) to start the INSTALLATION. EXE
  (3) click on the next button.
  (4) select ' Yes, "I want to restart my computer now" and click Finish.

  A toshiba engineer told me that first of all I need to install the old driver "5.12.01.3141", and it worked ok, but still no sound.
  And then he told me to install the "6.13.10.2152" version, but it didn't. I got the error message "the driver was not installed.

  I already tried many different drivers, including generics and the yamaha riders.

  Please tell me a good solution for this problem if possible.

  Thank you very much
  Hugo

  Hello

  Do you get the CD of Windows XP Home edition without SP (or perhaps including SP1) facility somewhere? Tecra 9000 is old enough laptop model (6 years) and maybe you should start installing OS like original recovery image.

  Install Windows XP without SP home edition and configure all hardware components. After doing this update to SP2 brand. Maybe this order facilities will help you to have BONES works.

• I would like to re - install Windows Vista, but my drive does not all service packs. Download Windows Vista with service pack already on it?

  so, I'm running vista 64 bit basic, I want to do a fresh install,

  but my drive is very early (noservice packs ect) can I download of ms a basic family of complete up-to-date vista 64-bit with sp2 with my cd key? or should I shut up and make from my cd and cope? If I do a reinstall should I reinstall all my programs as well?

  Hello yaleblor,

  You can download the full SP2 for Vista from here: http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Save the file to a CD/DVD or USB key.

  Once you have the service pack downloaded file, you can use your current Vista CD to install a fresh copy of Windows Vista on your C: drive. Once you have installed Vista you can install service pack 2 directly from the CD/DVD or USB you originally stored it on. All you then need to do is to run the Windows updates to update your system completely.

  You can find out how to do a clean install by looking at this link from my Web site: http://vistasupport.mvps.org/install_windows_vista.htm

  After you install Windows Vista, you will need to re - install all your programs, so make sure that you have all the programs by hand before starting to consider reinstalling Windows.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Satellite P10 - after installing XP, the SD card reader does not exist

  I formatted my Satellite P10 and complete nine with XP SP1 installed. Since that time the integrated SD card reader no longer exists in the system (when I insert an SD card it doesn't work). Is this a problem with a driver or what can be the problem?

  Before formatting, it's normal. Pleas explain easily. I'm not a professional user.

  Hello

  What drive did you use to reinstall Windows XP? If you use the Toshiba recovery disc are all drivers and pre-installed tools because the disc contains a picture of the factory settings.

  In your case, I would try to install the latest driver for the European driver of Toshiba download page card reader. Maybe it's just a driver problem you s wrote:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  I m wondering that you only use the SP1 for XP. SP2 or SP3 new contains a lot of important security updates. I recommend you to update your XP version.

  Welcome them

• Project created after installing the new update for CP9 does not not on Web server

  We upgraded 2 computers yesterday with the new update for 9 Captivate and that they will not play on our web server.  We have completed the upgrade of projects work very well.

  New projects are working fine locally.  I had to open these on a computer that has not been to level again and then make a new project and copy the slides in the new draft and publish it.  Then it works on our web server.

  Hi Susan,.

  Can you check with your Web server administrator that the list of permitted such MIME type entry for json files?

  It is a necessity with the changes in the recent update to HTML5 runtime. Please let me know if that solves the problem.

  Thank you

  Aditya

• MicrosoftOffice keeps trying to install it on hard disk Drive does not exist (Q)

  Microsfost Office continues trying to install hard drive (Q) to non-existent

  I get an error message of microsoft office 2010 which its tries to install to Drive (Q), that is a bug or something but there doesent there is no disc hard secondary any body knows how to change where he moved to?

  "bryang93" wrote in message News: * e-mail address is removed from the privacy * .com...

  Microsfost Office continues trying to install hard drive (Q) to non-existent

  I get an error message of microsoft office 2010 which its tries to install to Drive (Q), that is a bug or something but there doesent there is no disc hard secondary any body knows how to change where he moved to?

  You try to install the 'click-to-run"of MS Office installation.  That's what trying to create your Q: drive.
   
  See: http://off ice.microsoft.com/en-us/excel-help/click-to-run-switch-to-using-an-msi-ba sed-desktop-publishing - HA101850538.aspx? CTT = 1 to allow passage to the full installation of Microsoft Office version.
   
  More info on Click-to-run: http://office.microsoft.com/en-us/products/what-est-cliquer--run - HA101868855.aspx? CTT = 1
   
   

• Any way to install PES 7? My drive does not work, if I can get a replacement or download?

  I have a version of Photoshop Elements, 7. When I try to install it, it passes through the wizard and says it is installed, but when I try to open it there is no .exe file. Is there a way I can get a replacement CD-ROM, or download the installer? My serial number is still topical. Thank you.

  The downloads are available through the following page:

  PSE 7, 8, 9 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-7-8-9-downloads.html

• After the updates installed for xp edition family, computer does not start even in safe mode (or in any other mode)

  computer does not restart after installing updates for xp home edition - does not restart in any mode (including safe mode)

  HiRonKlip,

  If you have the Windows XP installation disk, you can perform a manual system restore by following this link.

  How do I recover from a corrupted registry that prevents Windows XP startup

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• install Daemon tools

  HIII,

  I am could not install daemon tools in my windows 7, please help me

  Contact: http://www.daemon-tools.cc/eng/home. This should help. This isn't a question of Ms. Frenchie

• VMware Workstation 11 crashes after installing VMware tools

  As the title suggests, VMware Workstation 11 crashes after installing VMware Tools with a guest Windows 7 x 64. I am running VMware on a host Windows 7 x 64. It happens every time I try to install the guest operating system. Attached to this post are all the newspapers that I could find that I thought would help solve the problem.

  
  

  Thank you

  Wila

  Hello again,

  Maybe the following post helps (where you installed Visual Studio)

  How to troubleshoot Workstation (vmui) - Access Violation Crash? How to troubleshoot Workstation Crash (vmui) - Access Violation? How to troubleshoot Workstation Crash (vmui) - Access Violation?

  --

  Wil

  As you may already know, VMware has just released a major update for 11 workstation (including VMware tools updated). Workstation now works almost perfectly. I don't have accidents since then. This means that I have was right in my post above. This is indeed nothing more than a BETA version of VMware buggy, lazy, masked as a "final". Wow, it looks like that a respectable company like this would not resort to such unethical practices. I mean that you would expect this kind of crap of a company like Electronic Arts, but VMware? Come on guys, you're better than this!

• CD/DVD drive does not work after 8 Win instalation

  Since a month since I've updated my windows in windows 8, everything works fine but the DVD - RW.

  When I put the blank cd and try to open it, it gives me error when opening by saying:
  "windows could not complete the format".

  Who's a software or a hardware problem?

  waiting for help!

  This means that your CD/DVD drive no longer works and is not recognized by the system?

  If Yes, then I would recommend checking this Toshiba document that I found on the portal of the knowledge base site:

  + Why my CD/DVD drive does not work after upgrade to Windows 8? +
  http://APS2.toshiba-tro.de/KB0/FAQ2B03F10002R01.htm

  You must uninstall the programs from Toshiba:
  TOSHIBA Recovery Media Creator
  TOSHIBA Disc Creator

• Media Player - after installing Windows Media Player 11, which is not properly installed, can I roll back to WM9?

  After you install Windows Media Player 11, which does not properly get installed, can I roll back to WM9?

  Hello

  -You get an error message?

  I suggest you follow the steps in this article to uninstall Windows Media Player 11.
  http://support.Microsoft.com/kb/934372/en-us

• Combo DVD/CD drive does not appear in Windows Explorer or the Device Manager

  The combo DVD/CD on my laptop drive isn't in Device Manager or Windows Explorer.  The door is not ejected.  You must use a paperclip, poking into the hole to open it.  I also re - it sitting, but it changed nothing.  We had this laptop for 1.5 years and the disk worked great until yesterday when trying to install Starcraft II.  Installation failed and it has messed up also the DVD/CD drive.

  We read some other difficulty advice and tried the upper and lower filters in the registry, but there was no entires of upper and lower filters in the key.

  The specifications of the laptop are:

  HP Pavilion dv7

  Processor Dual-Core Mobile RM-72 2.10 GHz AMD Turion X 2

  4 GB OF RAM

  64-bit Windows Vista

  Hello

  Check with HP Support, their online documentation and drivers, and their known forums
  questions.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.