Hardware not recognized by the system

Similar Questions

• Portégé R700 - 15L - 3 G is not recognized by the system

  Hello

  I already bought this laptop and I have problem with 3G driver to work.

  I downloaded the latest drivers from the website, but the device was not recognized by the system?

  Any ideas how to fix?

  Best way to fix this is to install the original OS, you got with this portable Portege. Original recovery image contains all the necessary drivers and tools and utilities.

  When you use the FN + F8 key combination what options are available?

• 1 t verbatim USB stick not recognized by the system and will not work

  I used my USB from Verbatim 1 t hard drive in the past and it still works on my Vista computer, but know is is a USB 'unrecognized' device and does not work on my XP.  In the system hardware listing is visible, but there is no driver for it and not available from my computer.  This disc is missing?  How can I get this, my backup disk, of the function?

  Hello

  Try the steps of troubleshooting mentioned in the links below and check if the problem persists.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Note:

  BIOS change / additional settings CMOS (semiconductor) to oxide of metal bad cancause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

  http://support.Microsoft.com/kb/314634

  Note:

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

• Satellite Pro L100 132: old RAM is not recognized by the system

  The original memory of our laptop (Satellite Pro L100-132) is 512 MB.

  I bought an extra memory to 1 GB (type has been verified in the product documentation).
  I installed the additional memory, the system starts and you can see the additional 1 GB memory.

  However, the system does not see the original memory of 512 MB, additional memory is installed on the laptop.

  The system should see memory original and extra, because according to the specification for the serial number of the cell phone (checked on the official website of Toshiba) the maximum memory (which can see the system) is 2 GB.

  I tried to transpose the place of original and additional memory between them, but the problem is the same.
  Updated the system BIOS does not solve the problem at all.

  Hello

  As writes the user above, there seems to be problem of compatibility and updating the BIOS will not help you. A malfunction of the compatibility between the old and new module of RAM which s

  This new module of RAM you bought?

  I think you need two modules of RAM high quality they are compatible together. You can order these ASP RAM modules in your country. Quad has already posted part numbers.

  Check this box!

• HP Pavilion Slimline s5212y: my camera to DVD A DH16AAL ATA s5212y Pavilion not recognized in the system after the installation of Windows 10.

  After you have installed the free version of Microsoft Windows 10, I realized that my DVD was neither effective nor recognized in Device Manager. Try as I may to address the support of hp in any problems and try to find updates or fixes to the problem, I have since restored my OS to the older operating system to Windows 7.

  I would like to know if there is a simple patch patch out there in the community that would allow my DVD-ROM to 'see' if I chose to upgrade to Windows 10?

  If there is a "patch" of sorts, I need to have the new operating system installed first?

  Hello:

  The only suggestion I can offer if you haven't tried these, would be to perform the steps listed in each step resolution 3 or 5 from the link below.   Try them both.

  https://support.Microsoft.com/en-us/KB/314060

• My Nec DVD RW ND-3520AW drive is not recognized by the system due to the corruption of recording possible

  I have a Gateway desktop and 510 x 86 with Windows XP Home SP3 and Internet Explorer 8.  My system does not recognize my DVD NEC drive due to recording possible file corruption.  How can I clean or set registry entries and/or device driver and get Device Manager to recognize the drive?

  http://support.Microsoft.com/kb/314060

  FixIt have a bad reputation on this forum, so you can go directly to "fix it myself" bit (for XP).

  Let us know how you go.

  Tricky

• NEITHER USB-6501 not recognized by the system

  Hi all

  I wrote this simple application that writes and reads a SPI frame.

  My PC have Labview 8.5.1 and DAQmx 8.7.1 (the CD was provided with my unit NI USB-6501). Everything works fine.

  But now I need to distribute the application, and I need to run it from a computer that does not have LabVIEW.

  I installed the latest versions of the runtime of LV (8.6), and the 8.7.1, DAQmx software but the program crashes produce an error (code 200477).

  I tried to install a more recent DAQmx software (8.9 full, engine of execution of 8,9 only), but the situation has not changed.

  Also: I tried on two different PCs, and I launched MAX: one of them doesn't even recognize that a DAQ hardware is installed (even if Windows recognizes as a work device).

  Anyway, the two PCs return error 200477.

  Any help will be much appreciated.

  Best regards

  Is - this dev4 on the pc without LabVIEW? You can easily see the device name in MAX.

• Satellite P300 PSPC4E - new battery is not recognized by the operating system

  Hello

  I bought a new battery and it is not recognized by the system
  Satellite p300-PSPC4 win7

  drivers ok
  OK magazine

  The battery is always fully recognized and fully supported. I tried several methods to try to load but nothing happens

  the battery icon is present

  Thank you

  Hello

  Because your old battery is always recognized, I think you bought the battery is not compatible.

  That's why you should buy a compatible battery recommended by Toshiba.
  I think you can buy this Toshiba ASP.

  Welcome them

• HDD and dvd are not recognized in the configuration menu, what could be the problem?

  The hard drive and dvd drive are not recognized on the configuration menu for my desktop Pavilion a4316f.  What is a controller failure?  A PCI controller can be used to replace the motherboard controller?

  dhobs,

  Anguish, that the suffering of the faulty motherboard has been aggravated by your actions. Why you decided to perform a restore (which re - formate the disk, erase all your data files (documents, photos, videos to misic,) is really amazing.)

  You had a viable BONE, work and the data store. You he clobbered with recovery. As explained, the 'tattoo' reads the embedded hardware configuration and will stop at the resumption of treatment if it detects a change.

  Only temporary help I can offer is to open the computer case and install a small 12v on the NVidia chip fan. IF the chip is not 100% burned, you can earn low enough time to reinstall the operating system and then add the map.

• HARD drive is not recognized on the Satellite 2800 200

  Hello

  First of all, I'm Dutch so I hope that I do not have too many mistakes in my English writing.

  I bought a 2800-200 Satellite at a friend's House. This laptop has a problem.
  When it is started is says "insert the disk in the drive system. Press a key when readya?.

  My bios is ACPI BIOS version 1.80
  In Pheripheral in Bios it says disc hard = not used Mode.

  On page two discs i/o: HARD drive: no drive.

  I tried two hard drives and the two were not working and not recognized in the BIOS.
  I have no CD of restoration.

  My questions:

  What kind of central computer has this laptop?
  Can someone help me with the recovery CD?
  What can I do to fix this?
  How can I change my BIOS so that the HARD drive is recognized?

  My hard drive is MK2023GAS and is not broken. There is nothing on this HARD drive.
  But also with the disk hard 10 GB of origin, I had the same problem.

  I hope you can help me and once again I apologize for my English.

  Hello

  I'll try to help you my friend.

  > When it is started is says "insert the disk in the drive system. Press any key when ready
  This message appeared on my laptop after the HARD disk is dead.
  I had to replace the HARD drive and reinstall the operating system.

  I guess that it of the same problem with your laptop. The HARD drive is not present or not recognized, and you will need to install a compatible HDD for the operation of the OS.

  I have google a bit and discovered that this laptop comes with the 10 GB HARD MK1016GAP of Toshiba drive. It supports the interface ATA-2/ATA-3/ATA-4/ATA-5.

  Please note that many BIOS have a limit of size of HARD drive. This means that not all HARD drive sizes are supported! I assume a 20 GB should be compatible, but this is just my own opinion
  > How can I change my BIOS so that the HARD drive is recognized?
  The BIOS can be modified outside the update (check page driver Toshiba-> Archive-> archive of Satellite).
  But vary important is that you use a compatible HARD drive.

  > Can someone help me with the recovery CD?
  Don t know if you will be able to order this CD at the service provider allowed in your country, because the laptop is really an oldie. But you should ask the guys.
  What you is to install the OS from the Microsoft CD-ROM and then could install drivers needed.

  Greetings

• Satellite A60 - replacement HD not recognized in the BIOS

  I have an A60 which began to shut down and not start.
  I tried to use the restore CD that has reinstalled the operating system, but the laptop still not managed to start after that.

  I suspected that the HD failed and bought a toshiba 40gig drive replacement. I have installed the new drive but and been in the BIOS (F2 and F1), but the BIOS indicates there is no HD installed.

  The recovery CD installs saying there no drive selected.

  Can anyone offer any help or advice on what I can try next?

  Here are some technical details.

  Laptop Toshiba A60-672
  old MK4025GAS (40gig) drive
  spare MK4026GAT (40gig) drive

  Thank you
  Phil

  > I have an A60 which began to shut down and not start.
  I tried to use the restore CD that has reinstalled the operating system, but the laptop still not managed to start after that.
  For me, it looks more like an overheating problem caused by the internal temperature.
  It is a typical problem if the cooling fans are clogged and that air can circulate properly.

  > I thought the HD failed and bought a toshiba 40gig drive replacement. I have installed the new drive but and been in the BIOS (F2 and F1), but the BIOS indicates there is no HD installed.
  One of my friends has updated the own Satellite with the new HARD drive and the HARD drive was not recognized by the BIOS due to the assignment of the PIN wrong and riders Check this!

• Keyboard Dell Bluetooth is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.

  My Dell Bluetooth keyboard is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.  I use keyboard now, but it seems not be installed yet when I check my keyboard or bluetooth devices. Keyboard does not work after so I'll try to figure out what to do before moving into the power saving mode. Help, please. I did all the updates from microsoft, and there is no update for my bluetooth device, I checked.

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the model of the keyboard?
  3. are you an error message or error code?
  4. which version of the Windows operating system is installed on your computer?

  I suggest you to consult the following Microsoft article and check if it helps.

  On troubleshooting in Windows 7 power management: http://support.microsoft.com/kb/980869

  Troubleshoot keyboard: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-keyboard-problems

  Keyboard and Microsoft mouse refer:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Reference:

  Troubleshooting external Dell Wireless or Bluetooth keyboards and mice: http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=277550#Issue0_1

• Pandigital PANSCN02 scanner that is not recognized by the computer

  I have a Pandigital PANSCN02 scanner that is not recognized by the computer.  Help.
  * original title - programs compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs *.

  Hello

  You can see the Microsoft Windows Compatibility Center, which says that the device has no information about the compatibility in windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&s=Pandigital%20scanner%20PANSCN02%20&type=hardware

  I suggest trying to launch the device in Windows Compatibility Mode and check if it works. See the link below:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Hope this helps,

• Hard drive not recognized on the computer after the upgrade to Vista

  I just upgraded to vista a my ext hdd does not come in computer how to install human and format the hard drive?

  What's your Vista-compatible external HARD drive? http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

  Have you loaded the proper drivers, firmware or software for the external drive and your version of Vista?  He can't just plug-and-play, especially if this isn't original USB key but a convert.

  Once it is recognized by the system (if it is compatible and once the drivers are installed), go to start / Control Panel / administrative tools / computer management / management of records and right click on the external drive that shows there or format to change the drive letter or a similar task.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Microsoft Arc Keyboard not recognized by the keyboard software

  Hello

  I recently bought an arc keyboard. Although the keyboard works fine, it is not recognized by the software intelitype.

  When I run the software (downloaded from the support section of the arc keyboard), the key settings tab says "no keyboard microsoft usb not detected"

  The Hardware tab says:

  "HID keyboard device.

  Manufacturer: (Standard Keyboard)

  Location: On the Microsoft Hardware USB keyboard

  Device: This device works correctly

  ***

  This is a wireless keyboard, it works, but I can not find a bluetooth device that is associated with the wireless.

  Reinstall the hard and software do not solve everything and I could not find a solution on the web.

  I am running Windows 7, 64-bit.

  I could use some help here!

  Thank you

  Hans

  Hello Hans,.

  Thanks for posting your query in Microsoft Community.

  I understand that the IntelliType software is not able to detect the keyboard of the CRA. The question could arise for various reasons, including a faulty hardware, damaged driver etc. I would suggest trying the following methods and check if they help to solve the problem.

  Method 1:

  Run the hardware and devices troubleshooter. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
  Open the hardware and devices Troubleshooter

  If the issue still not detected or resolved, proceed to the next method.

  Method 2:

  I suggest you try to install TWO software provided for Windows 7 in the following link of support for Microsoft Arc Keyboard. Check if the keyboard is detected.

  Microsoft Accessories: keyboard Arc

  If the problem persists, I suggest you refer to the following article which allows troubleshooting of common keyboard problems.

  Troubleshooting: keyboards

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.