Hardwear

Similar Questions

• If I buy and install Windows 7 Home premium is automatically change my laptop a touchscreen screen or do I need to get a screen special hardwear?

  If I buy and install Windows 7 Home premium is automatically change my laptop a touchscreen screen or do I need to get a screen special hardwear?

  monitor you need to buy a touch screen, win7 it turn not into one!

• found the new hardwear Assistant

  "Why do" found new hardwear Assistant "always arise in my computer, just after the start? I have not tried to install any hardwear. Has been like this for 1 month. The wizard tells me that some 'base system device' wants to be installed...

  Thank you very much, Einar

  * Go to start and run, type devmgmt.msc and hot ok.
  * Check for any yellow question mark on any device.
  * Right click on the device and turn off the device.
  Restart the computer, you will not get this new.

• IR Hardwear not detected in Media Center, put in place

  Hardwear IR not detected message in Media Center, put in place with Comcast.

  Hi Ransonck,

  Method 1

  First of all, I would say that you rerun Setup from the TV in windows media center, depending on your hardware configuration and the type of TV signal, by visiting the link below and check if it works.
  http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/record-TV/tutorials/broadcast-TV-setup-signal.aspx

  Method 2
  
  If the step above does not have difficulty, try to download and install the latest drivers for the TV tuner card by visiting the manufacturer and check if it works.

  Method 3

  Also check if the TV tuner card is compatible Windows vista by checking the Windows vista Compatibility Center.
  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What changes hardwear and software stop working playready

  What changes hardwear and software stop working playready? I don't want reformat my drive again and reinstall windows because of this problem of playready.

  Thank you

  (1) use the http://support.microsoft.com/kb/976590 ResetDRM to reset your PlayReady DRM

  (2) run Windows Media Center. Update of PlayReady through tasks, settings, TV, TV Signal, PlayReady update.

• Why can't I see my mp3 displayed on add hardwear

  I use 2 mp3 players, but I just see 1 on adding device, and how to check space left on it?

  Hi Elizabeth,.

  1 Windows operating system is installed on the computer?

  2. What is the brand and model of the mp3 player?

  3. you see an error message? If Yes, what is the full and exact error message?

  4. were you able to sync the device on the computer before?

  5 does the MP3 player uses USB to connect with the computer?

  I suggest to see the link and try to run the troubleshooter and check.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  If the MP3 player uses USB, troubleshooting hardware and devices should detect the device. Once it is detected, you can go to Windows Explorer and check the available space.

  Let us know if it helps.

• What are the ups and downs to get the Windows 3.11 on a pc operating system modern hardwear?

  I want to do a monster pc for game twiked using one of the operating system more oldist are there patches that will change a game like world of warcraft, so it can be used to play on it? If so and if the pluse on way the disadvantages I want to invest into making one more kill Monster pc games using the operating system of Dinosaur it will be so cool. Thanks for any input and support for my idea of pc Frankenstine.

  Not going not to happen. First off the coast, up to what Windows 98 or so games graphics was pretty lame
  Second, Windows 3.X only (theoretically supported 512 MB of RAM. You won't be able to run any games I can think.
  Thirdly, there is no Windows 3.X drivers for the new hardware.

  You'd better take your enthusiasm in some classes of TI. VP Tech Services

• upgrade Hardwear

  IAM running vista ultimate 64 bit any new service packs, 8 GB of ram gskill, 850 watt corsair psu, ati hd 4870 x 2, allin one msi 890fxa gd 70 mobo. the system works well. IAM think upwards of ranking for the bulldozer. will I need a new AMD mobo + 3? so I decide to not upgrade the mobo how well will be an ati 7990 run with the current mobo and phenom 965 denub'll. IV used this sapphire 4870 x 2 for 5 years and it still works like the day I got but is currently outshined by the new cards, but iv had the cooler on it acceralo years also, ideas?

  Hello

  It is always true that a major upgrade costs as much as a complete system. Its similar purchases
  a parts car. Since you want to do a full upgrade whatever it is that you do not upgrade can
  the bottleneck and or will have some age and use on it.

  Often, you will find a system preconfigured with the motherboard, the processor, memory, and
  desired video card. What to buy and use the items in the best case with power supply, cooling
  and so on. Then, put the old coins in the new deal as well, not only you have lowered the cost you
  having two systems work.

  Yet once, your best sources of information would come from the motherboard and graphics card
  manufacturers and their forums.

  Another good source of info would be Passmark, so you can compare the relative performance
  components.

  Pass mark - benchmarks
  http://www.cpubenchmark.NET/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• computer Vista laptop will not be closed and not close some pages will say there was a problem of hardwear too

  the net does not very well and immediately said still in the corner with errors

  Hello
   
  Try to turn off the computer by disabling all programs not Microsoft currently running on the computer and check the result. To do this, try the following steps.
  Step 1: Read the following article and follow the steps mentioned below to find the culprit that is causing the problem: http://support.microsoft.com/kb/929135/en-us
  1. follow "step 1: perform a clean boot ' to disable all non-Microsoft services. Restart the computer, and then click shut down the computer to see if the problem persists.
  2 If the problem does not persist in the boot, try "step 2: enable half the services" to "step 6: resolve the problem" to find which is the origin of the problem. When you have found the culprit, uninstall it.
  3. follow "step 7: reset the computer to start as usual.
   
  Step 2: Restore Internet Explorer settings.
  1. Click Start, type inetcpl.cpl and press to enter.
  2. click on the tab advanced and then click Reset.
  3. click on reset.
  4. When you are finished, click Close, and then click OK.
   
  For more information, see this link: http://support.microsoft.com/kb/923737
   
  NOTE: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
   
  Return message details, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• first uses only part of the hardwear

  I have a problem with the first, when it makes or exports only consumes 30/40% of the power of the processor, and 20/30% of the available memory, I put everything I found on this forum concerning the parameters of creation itself, but there always the same question, photoshop and lightroom running great, but first simply didn't.

  I have an AMD FX 8350 (4.2 GHz), R9 MSI x 280 graphic card and 24 GB of RAM (3 GB of DDR5 memory) so it should not matter what do not have

  Here is a picture of the Task Manager, any ideas how to use whatever he can run faster would be really useful

  

  As a general rule, AMD CPU are not seen at all, because they are severely suffering the very limited support and misapplied SSE instructions 4.x, which are widely used in PR that is why these very slow processors, even in 8-core versions. You get what you pay forand with AMD who holds very well. Although Adobe says AMD processors can be used, which is intended more to make attractive, but it means really you can install the program on a computer AMD, however you can't edit effectively with such a processor. Even the last octo-core AMD is significantly slower than moderate Intel quad cores. If you have an AMD processor, do not expect to comfortably edit any more demanding than DV codec. All formats of camera phone or action are well beyond what can manage an AMD processor.

  of Tweakers Page - what type of PC to use?

  Add to that the R9 280 video card, which is about 2 times slower than a card nVidia price also, and it does not come as a surprise.

  You have, how many processes running?

• Scratches appear in the camera

  I use iPhone 6 64 with iOS 9.3.2.

  When I start the camera application, I can see some scratches as below.

  Can someone tell me why my iPhone works like that?

  I've done DFU restore iCloud, but the problem reoccur.

  Best regards

  Jungwo

  Try to back up with iCloud/iTunes and restore, if the scratches are sill there even after you have restored the appliance, it must be hardweare malfunction. Best thing you can do is to bring to an Apple store and let them take a look, it could be some thing of not under your control, so they will replace it for free (if it is still under warranty).

• My computer touch pad does not work

  My model is VPCSB18GG

  How can I make it work?

  is this a hardwear problem?

  TRY DOWNLOADING THE SOFTWARE LOOKS UPWARD ON SUPPORT

• Mouse pads no longer works on laptop

  My HP laptop mouse pad stopped working while he was a little older than a year. The drivers are installed, a plug-in works mouse. My HP Tower is over 9 years & runs like a champ, but my laptop is horrible. By completely replacing the hardwear, is there anything else I can do?

  Short of taking it apart and replacing your touchpad is your only choice to operate. "Mouse pads" strange that it is usually called the Touchpad of what I know.  If you tried to uninstall the driver, and then reinstall and unresponsive, it would be a sing that the Touchpad no longer works. But since we have no history of usage it could have failed the liquid is spilled on him causing his failure as well. Otherwise, you'll have to disassemble the Palm to get it on the touchpad and replace it or some requires that you replace the complete plamrest'en as part of the palmrest Touchpad.

• HP Pavilion dv6-7028tx Enterta: Windows Setup could not configure windows to run on this hardware

  As I tried to reinstall win 7 on my laptop HP Pavilion dv6-7028tx, the competition, Enterta I received this message by win7 saying that «windows Setup could not configure windows on this computer hardwear»

  

  I did some research on this issue, it seems to be the lack of SATA drivers on my computer.

  Could you please tell me which intel SATA driver should I install to fix the problem?

  If this method does not work, then please can you me how to change the hard drive in AHCI or IDE BIOS setting?

  Thank you very much

  Hello:

  You cannot change the drive controller setting in the BIOS on any HP laptop consumers made in the last 5-6 years.

  See if it works...

  Download the drivers from this link below (first listed file - 64-bit).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx? AGR = Y & ProdId = 2101 & DwnldID = 23060 & keyword = Intel + Rapi...

  Extract (copy) the files on a USB FlashDrive without all records.

  With the flash player and support installation of W7 in the machine, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, will install W7.

• put the HARD drive in the optical drive stock

  Hi all

  I'm sorry if this is redundant, but I couldn't find the answer to any where or through telephone Support from Lenovo.

  I received the W530 with stock 500 GB HARD drive, but I want to replace it with the Pro of 840 Samsung SSD and put the HARD drive in the optical drive. I just restore the image from HARD disc for my SSD orginal (now in the original HARD drive box).

  At first I thought that I just leave the HARD drive in the original Bay and use the optical drive for the SSD, but since I use the SSD for the OS, and I want to use the DVD player sometimes, I thought I should put the SSD in original HDD bay and the HARD disk in the optical drive.

  I'm sure I've read that a lot of people did it with success, but I do not know much about computers and have never done nothing wise hardwear. I tried to put the HARD drive in the caddy Newmode U.S. optical drive, but it wouldn't fit (the screw on the caddy heads are too big). I think it's because the HARD drive still has the metal casing on it. I am worried, however, that if I remove the caddy, it voids my warranty, and above all, I am wanting to make sure it is the correct and safe way to the stock HARD drive in the optical drive.

  I put the rails HARD original on the SSD drive rubber because it is in which Bay but you have no other rails to the HARD drive in the case of the optical drive, and I don't even think he would fit in.

  So, it's OK to remove the carriage on the stock of HARD drive and put it in the optical drive without any kind of rails or protection (but attach it to the optical drive with the supplied screws caddy)? I think that's what I have to do anyway with the SSd, if she had to go into the optical drive.

  I am also an upgrade of RAM, but the keyboard under the bottom access RAM screw is stripped, so I can't remove the original RAM (it is under keyboard) and use the optimal 0 and DIMM slot installation 1. Any ideas?

  Thanks for your time, and once again, sorry if this is very basic.

  Change hard drives and memory do not void the warranty.

  The DSS must be installed exactly as the original HARD drive was, with rails caddy and rubber.

  The HARD drive in DVD case must be inserted with the 4 screws with the caddy, nothing else.

  To remove the stripped screw, you must use the small (jeweller preference) needle clamp with extreme caution, or slowly drop the screw head to create a new location. The second option is more dangerous because it produces small deposits of metal. If you can't do it yourself, ajeweller could do this easily for you.

  Good luck!