Has anyone found or written a "Win 7 USB driver" for use with the Olympus C-3000Z digital camera?

Similar Questions

• Has anyone found a way to add a shortcut key for copy properties?

  I went to the new model of Tween (motion tweens), and once I get it, copying keyframes is is no longer viable, I find myself with the context menu of hundreds of times a day to access the properties of the copy command.

  My natural instinct was to map a keyboard shortcut to that, but it is not listed in the menu of the mapping.

  Has anyone found a way, perhaps by scripts in order to achieve this goal? It's driving me crazy.

  It is strange that you can set a keyboard shortcut to copy the movement, but not for copy properties. Might be good to ask for the service:

  Feature request/Bug Report Form

• Windows 2000 update stops at "checking if your computer has the latest version of Windows Update software for use with the site... »

  When I try to update Windows 2000 by using Windows Update, web site crashes the message

  'Check if your computer has the latest version of Windows Update software for use with this web site... The Web site uses ActiveX controls to determine which version of the software your computer is running. "If you see an ActiveX warning, make sure that the control is digitally signed by Microsoft before installing it or allowing him to run.

  Y at - it a fix for this problem?

  This problem may occur in Windows 2000, Windows 2000 SP1 and Windows 2000 SP2 on computers. These versions are no longer compatible with the Windows Update Web site. To resolve this problem, you need to install the latest Service Pack for Windows 2000 computers. Follow the link below to access the article and get with the latest Service Pack.

  http://support.Microsoft.com/kb/260910

  Bobby

• Win 7 audio driver for T61, TYPE: 7659?

  Does anyone know if there is already a Win 7 audio driver for this laptop T61?

  Thanks in advance for your help.

  Yes, windows seven ships, with the audio drivers compatible and Lenovo also offers updates through the update of the website or system. You should have no problem at all.

• This identifier apple has not yet been used with the App store.

  I bought my macbook pro to my brother and always used without my Apple ID and then I decided to restore the macbook to the factory because of some problems with the performance setting, when I hit install OS X Yosemite on the disk, it asks you to login Apple ID and when I try to login with my account , he says "this identifier Apple has not yet been used with the App store" Please check your account information, when I hit "see" nothing happens and it of kind of stuck and makes me restart the process and enter my apple ID and password. "

  I don't know what the problem is and now I can't open my macbook to use

  Because the computer has been configured using Apple ID of your brother, it is bound to this ID. If you have never downloaded Yosemite, you can not install it. Ask your brother to insert his Apple ID, so you can get the computer operational again. Then, go to the App Store, sign in with your ID and check the purchases tab to see if the Yosemite is an option. If this is not the case, download El Capitan and see if it will install. If you want to do a clean install, quit the installer and the program below allows you to create a bootable USB key. Boot from it, wipe the hard drive and then install El Capitan. When you restart normally it will be your computer. See also the link for sale.

  Bootable USB Flash Drive-Diskmaker X

  Sale of old Mac (4)          Apple support

• my wifi password has been changed and now I want to get back in touch with the new password HOW

  my wifi password has been changed and now I want to get back in touch with the new password HOW

  Hey gerritfrompretoria,

  If you are not prompted to use the new password to your Wi - Fi network when trying to connect, you may have to remove the network on your system. This can be done by the following steps.

  1. Open system preferences in the Apple menu
  2. Choose the network
  3. Select a Wi - Fi connection on the left
  4. Click Advanced... in the bottom right
  5. Choose your network from the list of preferred networks
  6. Click on the '-' at the bottom of the list
  7. Click OK
  8. Click on apply

  Once removed try to connect to your Wi - Fi network normally and you will be prompted for the password.

  Sincerely

• Does anyone know how to open an old MS Word document file with the .ltr file extension?

  original title: file extension

  Does anyone know how to open an old MS Word document file with the .ltr file extension?  I would appreciate your help.  Thank you.

  If it's a Word document, why not just use Word to open it?

• My Hotmail has recently begun to generate drafts and get into my project folder with the title 'unknown '? Someone knows why?

  WINDOWS HOTMAIL

  My Hotmail has recently begun to generate drafts and get into my project folder with the title 'unknown '?  Someone knows why?

  Any Hotmail questions belong to http://windowslivehelp.com/product.aspx?productid=1

• Microsoft has not certified of my card videoa driver to use with directx [tm] how do I get it certified

  Microsoft has not certified my card videoa driver to use with directx [tm] how do I get it certified. I discovered this while trying to install a game [deer hunter challenge] However, other games work with directx, so why not this one?

  Have you looked in the Windows \ System32 folder and compared
  the list above?

  BTW - no need to quote me. You can remove the redundant quote with no response on the previous page?

• Has anyone found at zero color noise reduction?

  I rarely change the default color for 25 noise reduction setting.  Since the last update and installation almost simultaneously on a new computer, I find the color noise reduction setting to zero the number of files.  I can't guarantee that I did not it accidentally in the past, but certainly do not remember doing so.  And the color noise is visible in most of the images from scratch.  Has anyone else seen elsewhere?  Any ideas?

  Hi Bob Metzler,

  It is based on the format of your images.

  Lightroom sets the default value of noise reduction to 25 only for raw images.

  Could you please check the format of your pictures that you have recently imported into Lightroom.

  Kind regards

  Claes

• Has anyone found a fix for Airport Express music jump Apple?

  I searched for weeks for a solution to my intermittent gaps in music, aka jump. It's so frustrating. I really don't want to have to go to a wired solution. It will take too long and a cable unattractive in my rooms.

  I use the Bright House Networks 5 ghz Arris DG1670 router/modem that my provider rents for me.

  The router is less than 30 feet of my Airport express

  The airport express is on the ground, hooked by fiber TosLink Cable to my Focusrite Safire Pro 24.

  • Thinking that this could be a problem I have since turned sideways to try it as a cure for that surface in contact with the ground is less. The next step, I'll try is put on something instead of on the floor. But given the proximity is is not much of a problem anyway.

  I tried:

  • change the channel on my router from 11 to 40 to 47 to the automobile. They all jump.
  • I tried the 5 ghz and 2.4 ghz for connections.
  • Streaming of my Macbook Pro, streaming from my iPad 2 Air
  • Change the setting of joint A/N to N only (since the Express a N)
  • Activation and deactivation of WMM in the router configuration.
  • Pass bandwidth of 20/40 to 20 only and then back again to 20/40.
  • Change the interval of tag to 500 ms 100. (This allows supposedly with the flow and the battery life).

  All jumps. But after change the channel to a 44 superior to WMM and putting the Express with nothing around him to block the antenna inside, he seems to ignore a little less. It is likely that there are too many networks in my home nearby that are fighting in the spectra of bandwidth, but I hope someone may be able to offer something else.

  I suggest anyone with the same problems to try some of the "fixes" I tried above reading.

  Thank you.

  It may just be possible that you have a bad AirPort Express...

  I'm assuming that you have a 2nd generation 802.11n AirPort Express AND that you have configured to join the wireless network provided by your gateway Arris... correct?

  The router is less than 30 feet of my Airport express

  As you probably already know the AirPlay flow is from your MacBook Pro or iPad 2 Air to the Arris first, then, the Express. In theory, you should get the best streaming when all these devices are co-located. As you can imagine, if you take a camera from another room or floor, the stream will pass through a number of walls, floors, ceilings, etc., which will affect the overall available bandwidth.

  • Change the setting of joint A/N to N only (since the Express a N)

  Not quite correct. The Express supports modes radio 802.11a/b/g/n. 802. 11A only works on band 5 GHz. 802. 11 b or g only works on the 2.4 GHz band, and 802.11n can operate on either.

  • Activation and deactivation of WMM in the router configuration.

  AirPort base stations do not QoS support for this parameter shouldn't have any effect.

  • Pass bandwidth of 20/40 to 20 only and then back again to 20/40.

  This setting is usually only on the 2.4 GHz radio. All AirPort base stations do support 20 MHz channels across this tape. I suggest you leave this set to "20 option."

  and put the Express with nothing around him to block the antenna inside, he seems to ignore a little less.

  Most likely, it was the most effective solution. All wireless routers must be placed so that they are in a (possible) clear space for their antennas to be clear... especially of metal objects.

  It is likely that there are too many networks in my residence nearby which are fighting in the spectra of bandwidth...

  It is unfortunately a real problem... and maybe deserves to be studied more, if only to verify that it can be a cause. In an intense environment of Wi - Fi, most people will try to get the "best" of the performance of their network. This could mean, they have implemented their wireless routers to produce a network that can interfere with others without thinking.

  At best, you can try to change the channels that you already find one located on a less used channel... but without duplication of canals, including on the 2.4 GHz band are very limited. (1, 6 or 11 to the United States).

• Has anyone found the answer yet?

  Hi people, wireless issue! I searched through some of the many threads and there are a lot of them aren't there! But finding an answer to the question... Any body know? Is that what everyone does? I use Vista on a HP Pavilion dv7, in the in the taskbar notification area, I wireless. In Device Manager, it says that the Intel(r) Wireless WiFi Link 5100 is working properly. Still on the QuickPlay bar the symbol wireless is lit orange and bright. I know that the problem is only with the HP as notebooks children have no problem with the wireless, but they are running Windows7 and they are Acer. I'm now having to connect via cat5 so you only have the wireless that went wrong. Y at - it a hotkey to switch, that turns off the wireless? Someone has any ideas why this went wrong suddenly a planet full of cell phones?

  Hello

  I have the same card wireles and it worked for me.  Download and install Revo Uninstaller on the link below.

  http://www.revouninstaller.com/download-freeware-version.php

  Make sure you have the latest Quick Launch buttons install at HP.

  Run Revo Uninstaller, do a right-click on the icon buttons HP Quick Launch and select uninstall.  During the process, you will be asked to remove entries from the registry, select all and click on delete.  Do the same thing to the left on files.  Restart the computer.

  Run the quick launch buttons Setup.  Once finished reboot again.  If the symbol wireless in the Quickplay bar is always Orange, press the button for a second or two, and if all goes well it will turn blue.

  I hope this helps.

  Best wishes

  DP - K

• HP J005AX: Lack of WIN 7 USB Drivers for HP J005AX

  I recently changed the operating system windows 8 on my Windows 7 ultimate 64-bit HP J005AX. I managed to get everything works except the USB ports. They appear in devices such as Manager with no driver. I tried the drivers for other models J005 but none doesn't (including windows drivers 8) works. Does anyone know if there is a driver that will work these or if any other work around

  Hello:

  You need these drivers...

  SMBus Controller: Installation and reboot.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_127758_1

  Graphics: See if it works...

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5409278&swItemId=ob_146053_1&swEnvOid=4058

  USB3: Install these two and restart.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5409278&swItemId=ob_125616_1&swEnvOid=4058

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5409278&swItemId=ob_123787_1&swEnvOid=4058

  Ethernet:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5409278&swItemId=ob_143277_1&swEnvOid=4058#tab1

  Let me know what model wireless network adapter has your model and I'll post the link to bluetooth driver you need.

  Post the hardware ID's for unknown devices, and I'll post the links to the drivers, you need for those too.

• Photoshop trial has expired. How to extend? [was: what cookies are used with Adobe Photoshop?]

  I am trying to reinstall a free trial of it, but I found out from a friend that Adobe installs cookies to inform the program that the computer has a free trial version. So, how can I get rid of them?

  I learned from a friend of mine that Adobe installs cookies to inform the program that the computer has a free trial version.

  It's much more complicated than cookies. The trial leaves markers deep inside your operating system.

  You can press up to 14 more days if you register then cancel before that you have to pay.

  How to extend the free trials of Adobe to 44 days, rather than 30 days. ProDesignTools

  To get another 30-day trial, you must reformat your hard drive or use another computer.

• Inspiron 530 Win XP Home does not start with the TrendNet wireless card

  I just received 5/1 a refurbished Inspiron 530 530 Mini-Tower desktop: Intel Core 2 Quad processor Q6600 (8 MB L2 cache, 2.4 GHz, 1066FSB) Genuine Windows XP Home Edition. The PC didn't have any LAN card and I intend to use a working adapter TrendNet (COMPUSA) 54 Mbps Wireless G PCI I used very well with my old 4300 Dim run also Win XP Home. However, after that I booted up the new PC with the first series, I stopped him. I then opened and installed the card wireless in one of the 2 empty PCI slots. When I turned on the PC, surprise! The PC wouldn't start - it kept beeping with the glowing orange of front power button and turn off every two seconds, I then read the Inspiron 530 manual means that the motherboard has detected an error. Hello. I checked.

  I searched other posts in this forum and I've seen a few references to the boot configuration verification. However, installation of starting my PC doesn't have an option related to the wireless adapter.

  Someone help me please fix this error. I intend to reconnect the card on my old PC wireless again and start just to prove that the card is always good. I only removed a card video of him and the rest of the asis. (I've not carpet in my house is that reduces my chances to have fried the card when you remove or install.) I also touch the chassis of the PC before doing anything.)