has dropped iPhone 5s: touch screen no longer works

I recently left falling m 5s iPhone and when I pressed the home button to turn on, I noticed a horizontal row of white squares to the bottom of the screen and a big white vertical line near the right side. There was also a lot of other smaller lines, and the screen was very low. The touch screen does not work, but the locking buttons and the House doesn't. I got two downs to restart, but when the logo first appeared, the touchscreen still does not work.

It can be hardware related to your local Genuis Bar or the service provider authorized Apple. -AJ

Tags: iPhone

Similar Questions

  • Satellite S50t-B touch screen no longer works

    Hello

    My partner bought a S50t-B Satellite probably 5-6 months and everything worked perfectly, until she had a few updates to windows that has happened, and now the touch HID compatible drivers are apparently disabled in Device Manager?

    The touch screen no longer works, and I've pretty much exhausted all the options I could think.

    I tried to reinstall windows, apply all updates via the service center, I can't find the drivers for the touch screen on the support Web site downloads section and the bios etc is all to date.

    I was hoping someone could shed some light on how to proceed with this issue, since the main reason, she bought there the touch screen function.

    Thanks, Keegan

    Post edited by: keegz

    I don't have any idea what system you have installed, but if the laptop was equipped with touch screen, additional drivers for touchscreen are not necessary.
    If touch screen is working properly, the Windows (Win 8.1) should detect it automatically.

    What Satellite S50t-B-ooo do you excatly?
    From my point of few, the laptop must be set to settings factory just to check if its really a software related issue... so I wonder why you do not use HARD drive recovery or recovery media to restore the laptop to factory settings?

  • Portege M930 - entry of the finger on the touch screen no longer works

    Got one of these

    https://www.MyToshiba.com.au/products/computers/Tablet/M930/pdw04a-00c001/specifications

    Is no longer able to use the entrance of finger on the touch screen.
    Pen works on touch screen OK.

    It's like if I had accidentally disbled it somehow.

    Cannot find any reference to a key or switch to toggle finger on the touch screen to enter the manual in pdf or google.

    Does anyone know how to re activate the finger of entry for the touch screen on a toshiba portege Tablet M930?

    Hello

    The fingertouch can be disabled.
    Go to the control panel? Pen & touch

    in the Pen and Touch Settings window, click on the contact tab
    Check or uncheck the checkbox next to your finger as input device
    Click on apply and then OK

  • Touch screen no longer works

    After the wake-up mode PC day before, the touch screen did not work.   Everything ok with the mouse and keyboard.

    I have cleaned the screen, performed a system restore, nothing works.

    Model 23-f207a, s/n [redacted], Nr H57100AA #ABG. O/s 8.1 Win 64 bit.

    Hello peppa,.

    Thanks for your information product and welcome to the Forums of HP, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more. I see that the touch screen on your desktop all-in-one does not, and I'd be happy to help you!

    To start, I recommend that you follow this document on troubleshooting problems of touchscreen in Windows 8. This will help you get your system works correctly with the touch screen.

    Please re-post with the results of your troubleshooting, and I look forward to your response!

    Concerning

  • Satellite U840T-103 - touch screen no longer works

    So, I got the computer toshiba laptop for a little over 3 months and run since version 8.1 Win.

    Laptop computer and touch screen worked fine until today, when it comes no longer responds to my touch.

    The laptop has always he has touchscreen, it just doesn't work!

    Any ideas?

    Thank you
    Adam.

    Hello

    Go to the control panel (Windows key + X-> Control Panel)-> Tablet PC setting.
    The first display tab contains options such as configure screen stylus and touchscreen.
    Here, you should be able to start the installation program and identify the touchscreen.
    The first option must contain 1 internal LCD
    At the bottom, you might find button to calibrate and reset the settings for the internal LCD.

    If this does not work, the problem might be related to a hardware malfunction.
    In this case, only a technician would be able to help you.

  • BlackBerry Q10 Q10 - there is a voice and my touch screen no longer works

    My touch screen of my phone stopped being reactive, however, I noticed that there is now a voice that says everything I press, although the phone will not take me in this application, that is, if I type contacts, it says contacts and still stay on the home screen.  So, my question is

    (1) how can I disable this function and

    (2) it is this function that has messed up my phone or it works just no longer?

    Thanks for any help which will save me having to return the phone to the blackberry for a few weeks

    You have the screen reader mode.

    Touch the button to power on three times quickly to turn it off.

    You should hear "screen reader turned off.

    Then, go to settings > accessibility > screen reader and disable competely.

  • Touch screen no longer works after update to IOS 9.3.1

    MY touch screen of my iphone + 6a stopped working after the update to IOS 9.3.1. I tried force closed all day and it made no difference. does anyone know how to fix this?

    I have exactly the same problem with the same Iphone with IOS 9.3.1 + 6

    The only way I can get to work again for a light moment is to reset the Iphone now deep-set buttons home and power together until it restarts.

    It works for a short period of time, and then it freezes again.

    Started to occur immediately after the update restarted the phone.

  • HP Pavilion x 360 n011dx 11: x 360 11 touch screen no longer works

    Hello, I bought a computer hp laptop pavilion x 360 11 n011dx, formatted and installed windows 8.1 64 pro (in Portuguese Brazil) everything has worked perfectly just the touch screen if it is stopped. I tried to format and install windows 8 enterprise 64, did not work, installed the drivers hp site and not get success, I can't do the restore partition deleted because to install the system

    PS: in the bios (test of memory and hard drive), the touch screen works.

    I thank all those who can help.

    I could operate the screen touch download all the drivers for the chipset, thank you for your cooperation.

  • A700 touch screen no longer works

    All of a sudden the touch screen on my A700 has stopped working. I tried to update the drivers (I think elo Tyco Electronics TeTouchPlus v 1.4.0 is installed). The screen takes the input during calibration, but after that the touch screen has no impact. I'm used to be able to use the touch screen to connect. Now, I can't do anything because it is not responding. Suggestions? Thank you.

    I looked in your question and found bad that you can not use such an interesting feature with your office.

    Please uninstall the Tyco Touch driver, then reboot the system after that install the driver of the keyboard, then Tyco Touch driver version 1.2.0.0

    Please download the keyboard driver of the cited web link below.

    http://consumersupport.Lenovo.com/us/en/DriversDownloads/drivers_show_3284.html

    Please download the driver of Tyco Touch of the cited web link below.

    For 32-bit operating system, please follow the link of web http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_show_3283.html

    For 64-bit operating system, please follow the web link

    http://consumersupport.Lenovo.com/us/en/DriversDownloads/drivers_show_3282.html

    Best regards

    Tanuj

  • Touch screen no longer works a few days ago on my HP Pavilion 23

    Hello, I know not what is there, all of a sudden my touchscreen is not working. I did all the steps, like trying to put in place and re - calibrate, easy troubleshooting but touchscreen is insensitive.

    Hello @Lee1965,

    I understand that your touch screen of your HP Pavilion 23 has stopped working. I suspect that it is the result of an update which did not correctly on your computer. I'm you provide a HP support document: use Microsoft System Restore (Windows 8), that will guide you in the process of restoring your computer to when the touch screen worked as it should.

    This can happen from time to time with an update that regardless of how the update is ready no two computers are exactly identical and variables which are unexpected creep upward. Normally these variables affect our computers nor affects any part of that we will never use so don't notice do not. Other times that they affect the things we use as your touch screen. Windows offers the possibility to return to until the problem occurred for the same reason.

    Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a great day!

  • Why my acer touch screen no longer works with vista?

    My girlfriend did turn Vista Home premium and successfully uses his touchscreen Acer t230H monitor. The touchscreen function has stopped working. We cannot understand. The closest we can get is that Vista does not support input more tactile. But the touch function works well until about two weeks ago. We are extremely frustrated at this point. Help, please.

    Stephen

    We tried to update all the HID drivers in Device Manager. all the drivers are up to date. It goes the same for monitors in Device Manager.

    Hello

    I suggest you to contact Acer and ask them for the Touchpack software. Trouchpack software will be provided by the manufacturers of touch screen monitor. Install the software and check if that helps.

    http://support.Acer.com/us/en/default.aspx

  • Satellite U920 - touch screen no longer works

    My touch screen stopped working all of a sudden not. I can use the laptop by the keyboard and mouse. Is it possible that I went it accidentally extinguished by a combination of keyboard?

    How can I solve this?

    To my knowledge, there is no shortcut keyboard or combination that would be activated or deactivate the touch screen.

    But try to calibrate the touch screen (digitizer). You must go to the control panel (Windows key + X-> Control Panel). You will find a Tablet PC setting.

    The first tab called display contain some options such as configure the stylus and touchscreen. Here, you should be able to start the installation program and identify the touchscreen.

    In the screen options 1 internal LCD must be chosen.
    In addition, you can calibrate and reset the settings for the internal LCD.

    Check if this is possible

  • Envy Touchsmart m6 sleekbook - the touch screen no longer works

    Laptop is only 9 months old.  I did all the updates and then my touch screen stopped working - which was 4 days ago.  Today, I did a restore of the system to the point before the 1st review update (24/09/14).  It still does not work.  It corrupted my driver?  And if so, what is the name of the driver?  How to restore the touch screen...

    Product: EOLO6UA #ABA

    System: x 64

    Processor: AMD A10 - 5745 M APU with graphics Radeon (tm) HD

    SM BIOS Version: 2.7

    Microsoft Windows 8

    Hi raeban,

    This is the graphics driver that contains the drivers for touchscreen. Here is the AMD graphics driver high definition. If this does not work then it could be a hardware problem with the screen itself and I recommend you contact HP. You can reach HP Total Care at 1-800-474-6836 in North America or Start here if you live outside of North America.

  • HP Omni 10 5600ea Tablet TOUCH SCREEN NO longer WORKS

    The touch screen of my HP Omni 10 5600ea Tablet stopped working again. A Windows 8 previous restoration and installation of the graphics driver temporarily solved the problem when it happened before, but now it's happened again and I don't want to have to restore my computer every time that happens. Please give me a permanent solution to this problem. I tried to reinstall the graphics driver and updated the bios without result.

    I hope someone can help!

    (I am lucky enough to have a bluetooth keyboard and mouse so am able to always use the tablet to post this content).

    I have no approach to email you. If you have already made a recovery and updating the BIOS the only option I can give you is to contact the phone support.

    Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the following link to get help from your region number: phone help around the world.

  • Inspiron 11 3138 touch screen no longer works

    randomly

    Convenience store restores but am in the hope of a more permanent solution.

    c

    Hello

    Have you updated the drivers for the touch screen?

    Follow these methods and check if that helps.
    Method 1:
    Run the Dell touch PC diagnostics using the link below.

    http://Dell.to/We70YO

    Click on hardware, select touch screen and click Start Diagnostics.

    Method 2:
    If this does not help, please reinstall the drivers for touchscreen.
    a. move the pointer of the mouse to the upper right and click Search.

    b. now, type device in the search box, select settings and press ENTER.

    c. on the left side, that Device Manager opens, click on, and then open it.

    d. in the Device Manager screen, double-click Human Interface Device (HID) and select the drivers of the touchscreen.

    e. now right-click on it and select uninstall.

    f. now reboot the PC and check if the touch screen works.

    Let us know if it helps. If the problem persists, we will be happy to help you.

Maybe you are looking for