Has no parameters to query TCP/IP

During repair the connection to the Local network on my laptop, I get an error with the following window:
Windows could not finish repairing the problem because it is impossible to perform the following action:
Has no parameters to query TCP/IP connection. Cannot continue.

My router and the modem to work properly. Only this laptop has the problem. The system is configured to automatically obtain the IP address.

Try to set it's static and see if the changes come. Also use a flash drive and another computer, download the latest NIC drivers and update your network card on the computer that is giving you problems.

Tags: Windows

Similar Questions

  • Calling a SQL function which has Out parameters

    Hello people,
    I don't know if it's feasible, but here's my scenrio at hand. I have a database function that accepts a few parameters AND OUTPUT parameters. I want one Out to display in my select statement parameters. Is this possible?

    Thank you

    No you can not use a function with out parameters in sql statements.

    If possible do the function of this return value, use it in select. (imean instead of the parameter, OUT out which parameter through the BACK)

    G.

  • webcam VX-800 photo is tinted green. has no parameters property

    I recently replaced my old vx-1000 with the vx-800, in the hope of having a better webcam. Unfortunately, at the time of purchase, I met many problems.

    1. the image is tinted green, and I can't find the video settings or properties to change that.

    2. the image is laggy and the voice sounds terrible, which is worse than my old camera.
    3. I can't find a program for this camera to use Logitech or microsoft.
    I am very disappointed, but I guess overall, I want to know how to change the settings of the image or if there is a compatible Logitech program for this camera.

    Hi Shayenur AkA KonkurMade,

    Thanks for posting in the Microsoft Community Forum. Rest assured that we would do our best to help you.
     
    Method 1: If the issue is with Microsoft LifeCam VX-800, I suggest you to follow the steps from the link and check the status of the issue.
    Don't troubleshoot bad or no video or problems to start the LifeCam software
     
    Method 2: I also suggest you to see the link and check if that helps.
    Tips for solving common driver problems
     
    For reference:
    Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more
     
    Hope this information helps.
  • Orchestrator WF began in the interface graphic Web has no parameters préassignés

    Hello

    We have updated our 6U2 environment.

    Now, we have some problems with the WebGui integration Orchestrator.

    For example - a WF using input VM parameter is connected to the WebGui interface as a "context of the VM.

    If we call this WF for a given virtual machine that this VM object is not préattribués in the Windows Firewall.

    We tested this behavior with several Windows Firewall using this file, resourcepools - etc.

    No WF are the parameter pre-assigned with the selected object.

    Is there a work around for? Everyone knows the same problem?

    Best regards

    Mike

    Hello

    I answered my question by myself.

    Must remove the Extension vCenter and re-register the extension VCO with FULL domain name.

    Best regards

    Mike

  • Maintenance mode to create query strings?

    Why should I switch to Maintenance Mode to create query string parameters?  I created query string parameters in the past and I have never been held to switch to maintenance mode.  If I go to activate maintenance mode, here is the message I get:

    Maintenance mode is currently DISABLED. Click on the button at the bottom of the page to activate the Maintenance Mode. With the Maintenance Mode on visitors register as not being on the Web site.

    Then... I guess I have to move fast while it is in maintenance mode, so I don't miss the important Web site visitors.  I just took an Eloqua University class on the web of profiling and of maintenance mode was not mentioned when creating query string parameters.

    Just wondering why this requirement has been added in order to create new query string settings?  I'm sure there is a good reason, but I was surprised by this today.

    Hi Vince,.

    Maintenance mode is necessary if you are generating a high volume of web traffic. When the volume of Internet traffic is low, the system is able to create the settings while continuing to capture relevant data provided by all. If the traffic volume is high, the system cannot create additional "fields" in the database at the same time perform all write-queries that generate your visitors. In addition, when the new channels/parameters sets query are created, the system must comb all existing data to find these settings in one of the existing data, so if clickstream data is generated more quickly that the script can work through the data, it would cause a problem.

    So yes, it is possible that sometimes maintenance mode will be needed, and other times not. If necessary, its best to activate only for very short periods of time, as Yes, all incoming data in maintenance mode is ignored.

  • CF8 Report Builder is duplicative with the subreport parameters

    I encounter this problem to launch Report Builder Windows XP:

    1. create a report.
    2. create a subreport that has input parameters.
    3. Add the subreport to the main report and set the parameters to the subreport.
    4. Save and close both files.
    5. open again the main report file.
    6. look at the list of parameters to subreport to the linked subreport

    Regularly, I find that in this scenario, any subreport parameter that I initially set was duplicated, such as if, I started with:

    varOne - #query.foo. #
    varTwo - #query.bar #.

    As soon as the reopening of the main report and the subreport parameter list insepcting I'll see:

    varOne - #query.foo. #
    varTwo - #query.bar #.
    varOne - #query.foo. #
    varTwo - #query.bar #.

    Which causes errors when I try to run the report.

    What the patch schedule for Report Builder?

    This problem seems to be fixed in build 181436 reports generator

  • function call statement parameters

    I have called some functions within a select query and the parameters are mentioned in the function call.

    month, department_code,office,finincial_year

    are the input parameters

    these are fetched from the selected columns and are passed as parameters to the functions.

    all this is in the same select query.


    what names are to be written for this parameter list in the function call?

    do i need to use the alias names of the selected columns or...?

    the actual function has the parameters same as the variables mentioned in the query inside the function body.

    Please let me know what to do

    ASAP

    Thanks

    The first is good, you can not call the column alias at the same level of their statement.

    Nicolas.

  • Problem - has ink cartridge but no printing appears on the paper

    I have a printer of HP Deskjet 4200 all-in-one with a relatively new ink cartridge.  The printer prints white - nothing appears on my paper.  The last time I used the printer (with the same cartridges) was four months ago, and he was fine.  To my knowledge, nothing has changed (parameters, etc.).  I can't figure out how to get the printer to print anything.  I could go out and buy new cartridges, but ones I have is barely used, although only around the age of 6 months.  And the problem seems to be both color and black print (printer has two cartridges) - so I made me think that it would not be a cartridge problem.  Any suggestions on what I might try?  Thank you.

    It is possible that the print heads have become clogged due to sitting for so long unused.  Try to run the three cycles of cleaning of the Toolbox.  If it does not recover the printhead, then place 1 "of very hot water in a cup and watch the nozzles of cartridge in hot water for about five minutes.  When it comes gently dry the printhead on a wet cloth dry contacts of the cartridge, then reinstall the cartridges in the printer, and try another cleaning cycle.

  • event for broadcasting images of TCP/IP

    Hi all

    My request has currently 2 devices using TCP/IP on stream of framework to 100ms and 50ms data refresh to a PC. I would like to change the polling for data to generate an event when the data arrives, but I'm not sure how to proceed. I have currently 2 devices streaming via TCP/IP to a routine of labview with 2 loops and they seem to work as expected but I must question currently. The situation is not ideal and will not improve once I have 5 or 6 devices TCP/IP all managers of production at different rates.

    I previously used visa for data series and fell on the function of the event for the series that has greatly improved my behavior of codes once I got rid of my quick polling loop.

    I searched for a solution, but so far I can only find the VISA > advanced > range of event management that seems to support most of the types of communications except TCP/IP (I hope I'm wrong). I also vaguely remember a conversation where the queues or the declarant could be configured to provide the equivalent of an event for the recovery of the data.

    I guess that theres a certain many other means to produce something that looks like an event.

    Advice appreciated.

    Concerning

    Chris

    I don't know of anyway to raise an event when the TCP data arrives, but I don't know why you need to do. No need to question the TCP connection, just to set a long (or even infinite) time and wait for the data to come to you. Keep a copy of the refnum of connection TCP somewhere else, so if you need to kill TCP playback, you can do so by closing the TCP connection (which can cause the TCP Read return an error).

    If you want to generate an event of this, you could feed the chain you read TCP read in a user event.

    If you need to handle an unknown number of connections and you want not to loop through all, mark, each of them, you can instead create a reentrant VI and launch a new instance of it for each TCP connection. That said, I've never had a problem with the run-up to the election on several connections, and I have used this template a bit.

  • Internet Toolkit 6.0.1 and TCP 66 error

    FYI for anyone interested.  I just had a problem upgrading Internet Toolkit 6.0 to 6.0.1.  (I also improved LV 8.2.1 to LV 8.5 simultaneously).  I use "Get URL HTTP Document.vi" to get a small file of text (1 KB) of the web server, and it gave me error 66 when I upgraded, while it worked perfectly before.  Switching back to the 6.0 version, he now works again with LV 8.5.  I've wasted enough time on this one and don't have the patience to dig deeper, but the error has occurred in the «Buffered TCP Read.vi» component  I did a comparison VI on them and nothing has changed between the versions.  Error 66 has probably something to do with this.

    -David Moerman

    The same message with links to the images.

    Hi David Moerman. This error occurs in the VI 'Read.vi of buffered TCP"(found at LabVIEW-directory\vi.lib\addons\internet\utils\tcputil.llb\TCP buffer Read.vi). In the image below, you can see the original code of VI and the problematic portion (highlighted).

    There are two possible solutions to this problem.

    • Solution 1: change the number of bytes to read (replace 1024 by 1). Look at the picture below.

    • Solution 2: change the behavior of the read with the mode setting operation. This is the case, the value of the parameter was changed to "CRLF". Look at the picture below.

    I hope this helps.

    Greetings,

    Vinicius

  • How to use a parameter query to select and display the data in the table of the façade

    Hiiiiii

    I am using Access 2007 database
    I want to select the specific data in the database using control of the chain as 'select product, size, weight of ProductInfo where barcode (chain control) =?'  and also display the same table of façade.

    I use the connected database toolkit.
    I saw the example of the parameterized insert, but it did not help to use parameterized select query, as well as to display data of parameterized select query.

    I looked for example on parameterized select query, but I don't have any.
    So pls guide me how to do this. I would like to know the other method (if any) that the use of parameter query to perform the same thing.
    If possble pls share a vi reference.
    Thank you!!!

    HII szewczak
    Thanks for the reply
    but I did not getsolution in one of your shared links
    My problem is solved. There is no need to use the parameter query to select control values
    In my case I want to display data from database where bar code is even entered by the user
    I use the data function DB TOOL CHOOSE and create the condition of chain based on concatenation of strings

  • LLTP responder and TCP/IPv4 for SP3 upgrade

    I downloaded SP3... and it works very well... but it has not installed perturb or TCP/IPV4... I tried to install the perturb topology after you install SP3, but because I have already installed SP3, Microsoft say I don't need to install the perturb topology... So I'm puzzled!

    What can I please!

    Edit...  Can I somehow install topology perturb, (KB file) separately without removing SP3... That would be my preferred method...

    Thanks in advance

    See you soon

    The perturb topology LLTD Responder (Discovery) for Windows XP SP3 is available for download here .

    TCP/IPv4 is a standard part of all versions of Windows XP, and it appears in the connection network under Internet Protocol (TCP/IP) properties.  If you have access to your local network or Internet, IPv4 is installed.

    Boulder computer Maven
    Most Microsoft Valuable Professional

  • Can I use Easy Transfer to transfer my files and settinigs if my old Win 7 PC has a broken video card?

    The video in my old Win 7 machine is broken.  I am particularly interested in the transfer of all of the settings on my new computer Win 8.  The old machine has an external hard drive for backup purposes, but I do not know if this includes the parameters or a few files.

    Can I use easy transfer to access the internal hard drive, even if this computer has no video?  If there is no way to do it, my external backup disk has the parameters that I'm looking for and is accessible with Easy Transfer?  Other options?

    You must be able to see and access Windows Easy Transfer of two computers - they must be running and able to interact with. He has no way to initiate a transfer to a computer that has access to a second computer, without checking on the second computer you establish a transfer.  No work around, no other way to do it.  None. Your backup drives or external work not either except maybe to find a few files that can be moved.

  • BlackBerry WebWorks app via a URL with the parameters of launch?

    I have an application of WebWorks I want to start with a URL to the browser and pass parameters to query URL to the application in this way. Is this possible? How? I would be happy to use HttpFilterRegistry or API call, but I don't see how to use these approaches to get my WebWorks App settings, even if I write a custom extension. Example of code would be very useful, especially to consume the parameters. Or at least an indication of which API (s) for this.

    This should be supported by the framework. What I would like to recoemmend is simply invoke the application according to the normal and placing the parameters in the URL to the standard '&' "?" rating.

    Then take advantage of the class UTIL. JS out of the parameters passed required...

    https://bdsc.webapps.BlackBerry.com/HTML5/APIs/BlackBerry.utils.URL.html

    (If you need help, citing the app, it is done as invoke any other java application on the device)

    R

  • How do follow you steps contained and commitment to move prospects into your funnel? Query strings?

    We are working on making our culture, funnel and lead scoring capabilities to the next level with the launch of a new Web site and I'm looking for comments on how the other Eloquans are tracking content in their or websites, emails, etc..  In particular, those of you who use an external (non-Eloqua) DAM, Adobe CQ5, SFDC, YouTube files, Limelight or other active storage media.  I am confident in the brilliance and creativity of the community of Topliners to get at least 2-3 different options that work as there are a lot ways to skin the proverbial cat.

    Here are some things that we will deliberate or who already use to some extent:

    1 string parameters of query on each link for an asset

    2 sets of query string parameters?

    3. query string clusters?

    4 page marking (manual, automatic-rules?)

    5. any other ideas?

    What is your strategy of big picture to add assets, maintenance and training to keep this accurate and functional?

    Thanks in advance!

    -jeff

    jrummertime

    1. we use Eloqua to store assets. WE find easier since we can then use just the traceable link, wherever we promote this content.

    2. Add the appropriate printing group. Sorry for the confusion

    I think that the stated scenario might work for you. At the end of the day, you do a lot of marking at the front (which is really not that hard - just a bunch of click).  As you add content, you simply label it and rating program is already set up to the partition and workflow on this tag. So the only thing you do is adding the new content to the appropriate marking group.

Maybe you are looking for