has no success of body to toggel Port0 and Port1 aboard MCB2300 using LV for the ARMS?

I'm trying to toggel the GPIO (Port0, Port1) on the evaluation package of MCB2300 with LPC2378 uController aboard by using LV8.6. These two ports seems to have no programmable features with the help of 2 Ports NV., 3 and Port4 work well. If any body got these two ports in the work, so it will be great if you could post a functional LV or C code here in the forum.

I will be grateful for any suggestions or advice.

Greetings

Advertisement

Hello AMD.

I posted the solution to this elsewhere (although I admit that it is not easy to find).

Here you go: http://forums.ni.com/ni/board/message?board.id=420&message.id=1185#M1185

In this post, I am referring to the evolution of the model for the generic lpc2378 target project.  If you use the target of MCB2300 (as it seems you are), you need to open the project to C:\Program NIUninstaller Instruments\LabVIEW 8.6\Targets\Keil\Embedded\RealView\MCB2300\Template\Project\LabVIEW.uv2

The side effect of this change is that the LCD on the MCB2300 no longer works (as it activates / deactivates the GPIO slow/legacy records).  So you can either return the above changes or modifies registry addresses in the LCD display driver to point to the fast GPIO registers.

This problem should be solved in the next version of LabVIEW for ARM.

Good luck

Tags: NI Products

Similar Questions

  • "Any new name for the program" has encountered a problem and needs to close. Sorry for the inconvience

    Whenever we try to install something new, that settles it, but when we get the same error message

    "the new name of the program" has encountered a problem and needs to close.  Sorry for the inconvience

    We can't get anything to run now

    Hello

    1 is this problem limited only when installing an application?
    2. what application are you trying to install?

    Method 1.
    I recommend you to reregister the Installer engine.
    Here's how:
    a. Click Start, click Accessories and then click command prompt.
    b. at the command prompt, type the following and press ENTER after each line:

    MSIExec /Unregister
     
    MSIExec/regserver

    Method 2.
    For other methods, see the article below.
    How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
    http://support.Microsoft.com/kb/2438651/en-us

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Error "Generic Host process for Win 32 services has encountered a problem and needs to close." Sorry for the inconvenience. "Please tell MIcrosoft this problem."

    Original title: programs appearing and disappearing

    Generic Host process for Win 32 services has encountered a problem and needs to close.
    Sorry for the inconvenience.
    Please tell this problem to MIcrosoft. We have created an error report that you can send to help us improve the generic
    Host Process for Win 32 Services. We will treat this report as confidential and anonymous. To see the data click on send
    Error report or not send.
    I clicked on the error report, and that's what he said... szAppname:svchost.exe szAppver: 5.1.2600.5512
    szModver: 5.1.2600.5755 szModname: ntdll.dll compensate 00023845 etc, etc.

    Hi 1jimbo1,

    1. when exactly you receive this error message?
    2. did you of recent changes to the computer?

    Method 1:

    Step 1:

    You can try to start in safe mode and check if the problem occurs.

    Check out the link for more information on starting your computer in SafeMode below:

    http://support.Microsoft.com/kb/315222

    Step 2:

    If the problem does not happen in safe mode and then, try to perform a clean boot.

    A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    http://support.Microsoft.com/kb/310353

    If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source.

    After you have used the boot is a way to solve your problem, you can follow the steps to configure Windows XP to start normally.

    Method 2:

    You can also check the following link and complete the scan line on your computer to check whether your computer is infected with a virus or not.

    http://OneCare.live.com/site/en-us/default.html

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My acrobat 8 is recorded for a computer that has been hacked and is fried, but I can't reg to this computer and now I cannot use it for 30 days on this computer

    My acrobat 8 is recorded for a computer that has been hacked and is fried, but I can't reg to this computer and now I cannot use it for 30 days on this computer

    Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

  • I can't find my serial number for Photoshop Elements version 8. It came with a HP computer I bought in 2010. I recently had to do a recovery, it has been uninstalled. I moved since then and don't know how to get the serial number.

    I can't find my serial number for Photoshop Elements version 8. It came with a HP computer I bought in 2010. I recently had to do a recovery, it has been uninstalled. I moved since then and don't know how to get the serial number.

    Please explain how I can get the serial number?

    James, if it came with the machine and you are not registered, then you can't get it from the dealer where you purchased the machine. PSE 8 is now end of life and we have limited resources for the same thing, make sure you check the system requirements | Adobe Photoshop Elements if you try to install it on a new machine.

    If you want to upgrade to the latest version, you can check: photo editor, change the images. Adobe Photoshop Elements 13

    Atul_Saini

  • I'm trying to update to CC (2014) and get this message: 'failed to install. Setup has encountered an error. Restart your system and try again. (15) I did the reboot, the same problem.

    I'm trying to update to CC (2014) and get this message: 'failed to install. Setup has encountered an error. Restart your system and try again. (15) I did the reboot, the same problem.

    Help!

    I solved this problem by replacing the applications folder and the Adobe folder in the library - folder of Application support with the files from before the last update of Mavericks using Time machine.

    It worked for me.

  • has done a fresh install of XP pro and now can't use windows update.

    the error message:

    The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

    For self-help options:

    To support options:

    Error number: 0 x 80240036

    When you have done the clean install, what Service Pack level are you up to? In other words, you have installed SP2 and SP3?

    What version of IE are you using?

    Has been defined to factory settings or, Alternatively, your computer you reinstall XP on a disk at retail?

    All your drivers are up to date?

    Have you installed a firewall / anti-virus before you connect to internet software and if so, which?

    Maybe you could give some information on your system so that maybe someone can help more or maybe read this:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-download-any-Windows-updates-get-error/fb94ba4e-6b2e-4053-8706-bb1148201110

    Also:

    How to obtain the latest Windows XP service pack
    http://support.Microsoft.com/kb/322389

    Note SP1a does not exist so if you are at the level of the RTM, go straight to SP2 and SP3.

    FYI

    Steps to take before you install Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950717

    Installation of XP SP2 - http://support.microsoft.com/xpsp2getinstall

  • My iPad2 (iOS9.2) has locked up. I can turn on and off, but he can't see the icons. Cannot touch and change the screen.

    My iPad with iOS 9.2 2 locked. I can click it and outside. There is no guest sign in code. He immediately opened to the icons, but I can't switch to another screen icons. When I touch one of the icons, nothing happens. No movement at all. Even the clock doesn't change. Does anyone else have this problem?

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.
  • Anyone who has used '911 for the pc' or 'Impact' for spare parts?

    I am looking to buy a new power supply for my Pavilion Elite and want to be sure that it will have all the necessary plugs and plug the necessary types that my device is busy. I also think to a larger unit with more power just to upgrade that I can update the quad core later to finish with Vista.  Just want to be sure that I do not treat a fly by night company!

    I haven't used either mentioned companies.  However, if you are in the United States, I highly recommend Newegg or ZipZoomFly.  They are both very repetible.

    I love OCZ and Corsair PSU.  They are passionate about quality with a good price.  I agree that you should purchase a power supply at least 500W; 600W would be even better for future updates.

    Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.

  • my laptop has begun to open all PDFs in Wordpad and all I get is looking for binary files

    original title: download Word pad

    Recently, my laptop started to open all PDFs in Wordpad and all I get is looking for binary files. what I did to get it and how do I get that back to normal PDF files?

    Open any folder on your computer.  Click Tools > Folder Options > File Types

    Find the PDF and click on modify.  Chose the Adobe Reader software.

    Make sure the bottom box is checked. (Always use the selected program to open this type of file)

    Click Ok.   Apply.

  • Whenever I try to print a .pdf file, I get a message that Visual C ++ has requested to terminate in an unusual way and stops so I can not print the document.

    How can I get rid of this problem so I can print pdf documents?

    Try to repair the installation.

  • I just bought edition Creative Cloud schoolgirl and her teacher and the payment has been successful, but it seems that I can only download a free trial?

    I just bought edition Creative Cloud schoolgirl and her teacher and the payment has been successful, but it seems that I can only download a free trial for the entire application?

    And I checked the FAQ, it says that "no serial number is required for membership or subscription plan products such as Creative clouds - the student and the teacher.» Simply sign in with your Adobe ID to activate your membership. »

    However when I tried to login with my ID on Adobe Application Manager, he always says that it can't find the order and suggest me to buy a.

    I really wonder how I can work through this?

    Please see the links below.

    Also, make sure you use the right adobe ID to log in.

    Hope this will help you.

    Kind regards

    Hervé Khare

  • Error when you try to install Windows XP Service Pack 3: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

    Windows XP SP3 problem

    Recently, I met a problem with my PC and was forced to use the system recovery. Now I'm back to factory settings and try to install Windows XP Service Pack 3 on my computer. Windows Update won't work for me, that whenever I try to update I get [error number: 0x8024400A]. I think it's because I use Service Pack 2, or that's what I concluded after researching the problem, anyway.

    This is not my real concern, however. Because I could not get the update automatically, I tried to download and install the "Windows XP Service Pack 3 Network Installation Package for IT professionals and developers" myself. The first time I did it, I restarted the PC after the installation and was met with "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "  I went into safe mode and went to a just system restore point before SP3 was installed, but now I don't know how to install it correctly without encountering this problem after reboot. I'm hardly the easy just stick with SP2 when there are potentially important available updates. How can I get Windows Service Pack 3 is installed on my PC?

    It's certainly interesting!

    If the cause of your problem is to have a HP PC with an AMD processor and an original image on your hard drive (and of course it sounds like this is the case), the solution should be to rename the file intelppm.sys and launch the sp37394.exe patch. Once done, the SP3 file that you downloaded from here:
    SHOULD work!
    I'm puzzled why there is no intelppm.sys file in your directory C:\WINDOWS\system32\drivers.
    Since you recently returned to square one with your PC ("return to factory settings"), then you may as well run the patch from this page:
    and try the SP3 Setup file again.
    But, first, let's be absolutely sure that we are both using the same terminology. Please answer the following questions:
    1. have you safely backed up ALL your data?
    2. what method did you use to ride "back to factory settings? I think that your choices have been a destructive restore (full) and a (partial) non-destructive recovery. The first erases the disk and leave you with a pristine image and NOTHING ELSE (which means that all of your programs and data get deleted). The other (which does not always correctly) is supposed to leave programs and data intact.
  • Anyone has any experience of importing a csv file and store it in a database in MS SQL

    Anyone has any experience of importing a csv file and store it in a database MS SQL. Outside sql injection there is any another converns security?

    Draft of the steps.

    1. use to download the file from the client to the server see
    http://www.dennismiller.TV/index.cfm/2007/12/26/file-upload-using-ColdFusion-and-Flex

    2. use to read the contents of the file into a variable.

    3. perform a loop on the content of variables for each line, dealing with the variable as a list delimited by a newline rather then a comma

    4. use list functions on each line to get the data you need, and then to transmit these data to SQL with CFQUERY or CFPROCPARAM.

  • PC has not successfully restarted after the installation of updates

    Hello

    I have been updated with Windows Update and asked to restart my PC after the installation is complete, however, my computer froze just at that moment, so I had to press the power button to force it to close. So I don't a not properly restart but forced my PC to stop and I have not a screen saying "Configuring updates" as usual (because there is no restart appropriate but just a forced to close). When I turned on my PC back, I thought that all updates have been lost or screwed up because I don't restart the PC correctly, however, instead, windows said it was "Configuring updates" (from 0% to 30%) and 30%, he said he has been stop and then rebooted my machine and these updates have been 100% configured/installed.

    So my question is, were all 100% installed as said windows updates or was it just a fake reviews? Because I forced my PC to stop rather than restart it when all updates to complete the installation.

    In addition, argues that all updates have been installed successfully in the "Installed updates" menu, too. Please let me know if it of a false notice or not.

    Thank you

    T.

    Since you have not stopped correctly after the installation of updates, updates could not configured correctly

    Follow these steps to see the Windows updates are installed on your computer.

    1. Open Windows update via Control Panel

    2. In the left pane, click view update history.

    Use a system restore to restore your system to a previous state before the installation of the updates

    =================

    1. click 'Start' and type system restore in the search box, and then click "System Restore" in the section programs.

    When you are prompted by the User Account Control feature, click "continue".

    2. do one of the following

    * If there is a recommended restore point, click on choose a different restore point and then click Next.

    * If there no restore points recommended in the list, simply click next to continue.

    3. Select a restore point in which you know that the operating system works and then click on "next".

    5. in confirmation of your restore point page, click on "Finish".

    If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for

  • KeyPress HTML5 player

    My question is quite simple, is it possible to change how ignore you video when you press the left arrow or right key in mozilla html5 player. At the moment it ignores 15 seconds instead of 5 sec standard as in all players. What I found is a video fu

  • Question regarding polymorphic VIs

    We will use the key to reading for example (from the screw Configuration file). I want to wrap the "Read" button (which is polymorphic) so that another code always executes just before the "Read" button However, to do this, it seems that I have to ma

  • Volume of the recording Line-in - mass distortion

    Hi people, I was happy (and successfully) record vinyl records for months on my old pc, but now I have a new R500, but am unable to control the volume online. It's the same if I use the Line-in port (ie the microphone) or copy a cd - recorded sound i

  • Black screen of death after allowing the download of Windows updates

    If I turn off the Windows Update (never check the updates), everything works fine. If I put "Download updates but let me choose whether to install" I have problems. The PC continuously restarts itself just as the Windows password box appears.I find t

  • possible to the advanced recovery and investigation of my laptop online secure

    I have a Toshiba Satellite C660 - 1 5 S2C255356K with windows 7 installed NB and some basic programs and also files BullGuard Internet secure possible .is accounts on investigation line servey of my computer because I want to do advanced recovery but


HashFlare