has someone at - he found a solution to the search for global marker?

has someone at - he found a solution to the search for global marker?

the glaring omission of global search for markers - or exclusion of metadata to the project search function marker - is a big handicap for any project of long form doc.

Is there a work around or maybe a plan to remedy this bizarre situation in an upgrade?

big fan of the first, and even if there is plenty of downturns, it seems as if there is always planned if solutions non-existent

Thank you!

Hi Charliepus,

Sorry about that. Create a feature here: http://adobe.ly/feature_request

Thank you
Kevin

Tags: Premiere

Similar Questions

  • Someone at - he found a solution to the error 1009?

    TypeError: Error #1009: cannot access a property or method of a null object reference

    Ok. I will simplify my code so that the problem can be better understood.

    I have a class of main.as at the root of the document. Here, I have a bb:bigBox property = new bigBox() and added to the root. I have also sb:smallBox = new smallBox() which is then added to bb. However small chest must store bigBox initial x, value y. Thus, these properties must be stored through the smallBox constructor. This is where I get the error: 1009.

    Any help is appreciated. Thanks in advance

    Edit: I tried to move around the code, placing the init() methods in the timeline panel, nothing seems to work. Why is something so simple that gives so much trouble. Can Macromedia/Adobe ever get this thing right? Finally after years of Flash programming, the language begins to look reasonable, now I'm stuck on the crease. I looked this problem all over the web and nobody seems to have a valid solution. What's Adobe up?

    change the order of operations here, placing: sb = new smallBox(); following the line: bb = new bigBox();

    You cannot add a child at bb, which does not yet exist. Then set the x / y position within the main class before adding to the list of display, rather than in the smallBox constructor, as in:

  • I want to uninstall a toolbar that has been the result of the search for something specific

    Hello

    I want to uninstall a toolbar that has been the result of the search for printable piano music.
    I uninstalled the stuff accompanying this research but I can't get rid of the toolbar. Can I just download an another toolbar as C.NET or what?

    I have a Dell dimension 4700 desktop, XP and I have ' yet to learn through this forum help and everyone.

    Thank you

    Gina Davis

    Original title: how to uninstall toolbat Inbox

    (IE unknown version)

    Hello

    Tools are what bar you referring? That's a browser or another program?


    Method 1:
    Run this fixit to remove it completely.

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

    Method 2:
    You can uninstall the toolbar by following the steps below:
    a. open your Internet browser.
    b. click on 'Tools' then 'Add-ons' in IE; Click on "Tools" and "Manage Add-ons."
    c. find the add-on "Toolbar" in the list of available modules.
    d. remove the add-on toolbar in Internet Explorer, select the toolbar and click "disable".
    If you want to remove the toolbar, you can do this by uninstalling it in Add or remove programs.


    Also visit these links to learn more:
    http://TechNet.Microsoft.com/en-us/magazine/dd364987.aspx
  • The search for solution to the old ms help format lead to obsolete genuinecheck.exe

    I use a software which is absolutely essential for my work.  I'm in a situation where I need to read the help files for the old software.  This software uses an old help format that causes windows 7 to give an error "the help for this program was created in windows help format, which depends on a feature that is not included in this version of windows..." »

    I went to download the version of windows 7 to the help format that I need, but I need to validate my copy of windows 7.  I tried to download the genuinecheck.exe that I was directed by the microsoft site, but then I was informed that the copy of genuinecheck.exe that Microsoft gave me was outdated.

    The site I went to that was:
    http://www.Microsoft.com/en-us/download/exe-validation.aspx?ID=91

    It is a microsoft site, spewing a useless file right when someone like me is in terrible rights to our work.

    I literally hours complete my task of work and I know I won't get help I need in time to hit my date limits.  So I post this question with the hope that I can solve the problem after the fact.

    Thanks to anyone who can help me.

    And thank you MS for F * ing me.  I can very well lose my job because of you.

    OK, I found a solution that works for me.  I'll go through the steps because it is a bit complicated.

    First of all, I would like to thank Komeil Bahmanpour, who has a blog entry which gave the greater part of the solution that I needed to solve this problem.  You can find the entrance to the criticism according to:

    http://blog.komeil.com/2009/06/Windows-Help-program-winhlp32exe-for.html

    For many of you who may have this problem, you'll probably be just able to decompress the .cab file, it has linked to his site and then run the .cmd file to work things out.  However, who has not worked for me.

    * What I did *.

    In General, I had to download the help files for work and then replace the non-functional regions.  To do this I had to change ownership and permissions of the existing files.

    I downloaded the .cab files that contains the file winhlp32.exe and winhlp32.exe.mui for 64-bit windows machines 7.

    I opened windows Explorer and place it in the main c: directory

    I typed "winhlp32" in the search box.  It gave me all the files and folders that started with this name.

    Note: I tried to rename the existing winhlp32.exe and win32.exe.mui files, but it did not work because permission to files did not belong to the administrators.  Rather it is strangely belonged to the so-called "Trusted install."  So I had to change the owner to administrators (and give administrators the appropriate authority) to rename these files.  Here's how I did this:

    I right click on the files which permissions I wanted to change in all existing places that they were currently on my computer.  Clicked on properties.  Clicked the safety.  Click Advanced.  Click owner.  Clicked on edit and change the owner of the files to administrators. Here, I went back to the 'security' tab and clicked on "Edit" after the words "to change permissions, click Edit.  I checked the box full control for administrators.

    I also had to go through the process described above for folders files have been confined in. (help files do not work correctly without also changing the ownership and permissions of the folders as well)

    I renamed the original files (so I could change them back if something bad happens).  I wrote that the files downloaded in the same directories renamed files were in.

    I ran my program using old file system and everything worked!

    ***

    OK thanks to those who have already given this answer and thank you again once to angeline for this blog entry that gave me most of what I needed to fix this.  My work assignment go expiry date and you deserve the honours.

  • Our podcast has been "approved" but is not appear in the search or on iTunes?

    We received the following from iTunes e-mail:

    Your podcast has been approved. You expect to see on the iTunes Store in the next few hours. When it is available, you will be able to access the URL below.

    You can find your podcast using iTunes Store search in the next two days: https://itunes.apple.com/us/podcast/two-wise-jawns-podcast/id1112267267

    We waited the recommended two days to search for.

    We also clicked on the URL that says iTunes is related to our podcast.

    We us, click on the page within the app says Apple Podcasts, "product is not available. The object you have requested is not currently available in the US store."

    Our podcast is hosted on Soundcloud and named "two Jawns wise."

    It has been more than a week, and we are always unanle to find our podcast via the 'search' or the provided URL.

    How can we solve this? When can we expect our podcast on iTunes?

    Thank you!

    There is currently a bug in the store where your podcast can start life as 'hidden '. Connect to http://podcastsconnect.apple.com , select your podcast and click on the "hidden" link to view it. It may take a few hours to appear.

  • the search for solutions to driver for atheros 5007

    I have trouble with my CQ60-215DX and set up my new Linksys/Cisco E2000 router. The other computers in the House are connected wirelessly but they run Windows7, mine runs Vista. Router manufacturer and support said that the computers wireless card must be updated to a driver that has been done in 2010 to work with the router, but I can't seem to find online. I can only connect to the internet by plugging directly into the router. Is there an update available for this specific product, and if so where can I find it?

    Hello:

    I think this is the driver you need:

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=472276&swItem=ob-88613-1&mode=4&IDX=1

    Paul

  • the search for a solution to run foglight report online cmd

    Hello

    I'm looking a solution to run the report (based on a model of fms server) foglight in the cmd line. (via groovy or fglcmd or another way)

    The goal is to start a relationship with some of the arguments when a fire of specific rule.

    Someone has an idea?

    Kind regards

    Eric.

    Hello

    This thread seems to have information on what you are looking for: http://communities.quest.com/message/53728

    Condition of a rule or a script related to a rule action can run this API. Be careful though, as the condition can trigger several times causes a performance issue when the report is run several times in parallel.

    Concerning

    Nils

  • QOSMIO G30 - RAID-1 is GRADIENT, the search for a solution

    Hello

    My QOSMIO G30 is confirgured in RAID1. Today the second hard drive failed, unless I hard when I saw "RAID-1 is DEGRADING" displayed on the screen to power on the computer. Once booted Vista Ultimate, I get an error indicating that the Toshiba Raid Service had stopped unexpectedly (this message is also recorded in the system event log). "Unable to get the State raid console display."

    Go to the BIOS Setup, I see that the secondary hard drive is in the State has failed while the first is in the online state. The two hard drive are marked "RAID-1.

    I restarted after removing the second hard drive in the system. Of course, I always get the message from the bios. Vista boots normally and then I get an alarm saying the raid is broken. It's perfectly anticipated if only the second hard disk is now deleted.

    I connected the hard drive to a SATA Transcend USB controller and it work perfectly! Then I reinstalled the hard drive in the computer. After the reboot, the raid service accident again. The first hard disk is functioning stil and I made a backup full, just in case.

    I searched a lot for a procedure restoring the second hard drive operation, but I've not found anything really helpful.

    Go into the BIOS, if I change the disc to nothing else than "RAID-1" mode, I said that I have to reinstall the OS. I don't want to do that. I want to back the second hard drive in operation. I want to have the mirror restored from the first hard drive on the second hard drive, without losing the contents of your hard drive.

    Any help is appreciated.

    --
    F. Piette

    This with changing RAID mode and install of the OS is just because when you change the RAID in the BIOS operating system must be installed again. RAID info should be saved into the MBR.
    What RAID driver and RAID utility do you use?
    One last thing: is your laptop preinstalled with recovery Toshiba (32 bit) image?

    > I want to put the second hard drive in operation.
    To be honest, one thing is not understandable to me. Are you trying to get old HDD (a second) working again or you have new HARD drive (as a second) und try to have mirrored hard drives again?
    Have two exact hard drives the same capacity?

  • My Skype account has been disabled and I can't answer the questions for re - activate

    I wonder to indicate the year that I created my Skype account, which I do not remember. I also wonder to provide credit card details. I have only ever paid for Skype calls for a short time, a long time ago so I don't remember the details of credit card that was used.

    The website says there is a cat of support, but after following all the links just to send me round and round in infuriating circles.

    Does anyone know how to contact a human being using Skype? Even if only by e-mail, or by raising a ticket online?

    Hello

    Thanks for posting your query on the Microsoft Community.

    With the description, I understand that your Skype account has been disabled and you want to contact Skype support. I will certainly help you to the query.

    I suggest you refer to the mentioned below link and check if this is useful:

    How can I contact Skype Customer Service?

    https://support.Skype.com/en/FAQ/FA1170/how-do-i-contact-Skype-customer-service

    Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

  • The search for a solution in detail FieldPoint error

    everything by deploying the projects(using_Fieldpoint_Hardware).it deploys successfully, but when I run my program host. giving a TCP/IP connection error
    error:
    using two screws
    1 acquisition of data vi. It acquires data using FP Read.VI
    2 program.
    It is using the TCP/IP protocol to connect, but gives an error.
    (Error 63 appeared to TCP connection open in TCP _IP_host.vi-> Main_Host.vi
    Reason (s) possible
    LabVIEW: Serial Port receive buffer overflow.
    LabVIEW: The network connection was refused by the server. For TCP/IP, make sure that the server is running and listening on the port you want to use. Firewalls can also cause a server to refuse a connection. For VI Server, make sure that you have enabled the server from VI tools > Options > VI: Server Configuration.)

    You have it solved? Can update you?

  • While the search for something in google, the google all turned 180o - bar which has pushed for this action be executed?

    While typing in a google search, all of a sudden my entire page began to turn clockwise 180 °.  -What happened? Which insisted that I know in the future. Thank you.

    Hello

    Close this Web Page.

    If everything, including your empty desktop screen are left on the side

    Try pressing Ctrl + Alt + key direction, or Ctrl + Alt + a other arrow keys

    Also, you can try this:

    Right-click on an empty part of the desktop > Graphics Options > then Rotation.

    See you soon.

  • auto blog software has stopped working. Windows is checking for a solution to the problem not closed Windows program and you contact if a Solution is available. __

    I can't get my autoblogging software to run on Vista. I know it works with vista, because other users have on their machines. The developer also said it works on vista very well.

    For some reason, it does not work on my machine. I installed 2 different versions of the software and both give me error in the title of this thread immediately. He doesn't have the ability to load up and fail or anything he just lift the error immediately.

    for purposes of test and restore my sanity a little I have installed this software on an old laptop running XP and a desktop running xp, after installing the software I opened the first time and on the laptop, I got this same error, however XP let him program continues to work and he opened and held its positions. The Office opened and ran without error.

    So my question is why this software is triggering this error when I open it up on top of my vista machine, and how can I work around this problem or solve the problem, so I can use my software.

    The error indicates that microsoft will let me know when a solution is available, but that never happens.

    Any light you can throw on that would be great.

    Try to run the software in Compatibility Mode: http://www.vistax64.com/tutorials/75909-compatibility-mode.html to see if that helps.

    What is the EXACT error message (Word for Word)?  What version of Vista you are using?  What is the name and version of the software (and the Web site if you have one)?

    If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

    Start in safe mode with network and see if the problem is here.  A result allows us to narrow down the search for the cause.

    I hope this helps. Please include answers and results in your response if it does not work.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Your feedback / submit an idea not work not (Page not found) | Search for term regular multiline

    Hello

    I arrived a few months an idea with a (edeting multiline regexp search).

    Nice to see that this has already been incorporated, to me but disappointing is the search for the regex, in combination with the Edeting multiline.

    But what he brings me to use regexp search, when I can't change every time.

    In this function, I would once again.

    But unfortunately I can not find the feedback system, and here in the forum I always get the error message, page not found.

    Beautiful would be if the two could be corrected ;)

    For me, code is currently the " " http://www.sublimetext.com/ "editor of my choice if Adobe so some producing duties, edge code would be a real alternative. "

    Still I find edge Code is not ready for daily use.

    Greetings

    Dirk Persky

    Hi Dirk,

    This Forum is now the feedback system!

    Edge Code CC is a new image of the project in parentheses. I thought he had a card for this feature in the Media Product Backlog , but I did not see in a quick search. We invite you to add your vote for any function it, or a new file number if you can't find it.

    Thanks for your comments,

    Randy

  • Someone has found how you actually contact Mozilla or will we just we amateurs to find solutions to the other?

    I found that I cannot now log on my emails via Thunderbird after changing my password for BT and entered the new manually when prompted by Thunderbird. This seems to be a common problem. BT have been very clear with me today. I am able to access my emails by going to their website and they have no responsibility to solve the problems with Thunderbird. It seems no obvious route to someone at Mozilla who takes responsibility for the problem.

    Even if Thunderbird has always Mozilla as part of its name, is therefore no longer a Mozilla product, because he was treated by a community for a while now. This is why the development is at a slower pace and each seven versions major version compared to Firefox.

    Mozilla doesn't have the resources for a call center for one on a support on this forum, phone, chat or e-mail for all of their products and their projects. One on one support if there would not be for Thunderbird and SeaMonkey (who is also working on a community).

  • Windows has found a solution.

    Action Center has found a solution to solve a problem with my AMD/ATI video driver. I get, the solution cannot be downloaded at this time. Make sure that you are connected to the Internet and download at a later date.

    Try to install the latest driver manually by downloading the most recent available on AMDs website.

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

Maybe you are looking for

  • Why my iPad stop backup?

    My iPad 2 had been save regularly without any problems since I bought in 2012, but a few months ago I started having occasional mentions that "iPad has not been saved for ______ weeks. Backups occur when the device is connected to iCloud, plugged and

  • Bluetooth on Mac turns is not on or not available

    I was just using Bluetooth and I restarted my computer and now all of a sudden it doesn't work it's like readers just be deleted or something. I was also trying to connect a PS3 controller that has been successful. Also, I download the software and h

  • Satellite A100-151: BIOS Downgrade

    Hello I upgraded my BIOS Notebook´s to Version 1.80.Now, I have some problems of grafical (screen looks a bit like JPG-arthefacts). Not nice.Is it possible to downgrade the (before the upgrade is recorded) BIOS-file BIOS. BAK?If the answer is "Yes",

  • Is it possible to add local groups and users on Windows 7 Home Basic Edition?

    She is trying to help someone solve the problem of having with what she said, it is Windows 7 Home Basic Edition. See said that it is a purchased laptop recently and that she had already used the local users and groups on this laptop, and now she is

  • catalogue request does not show property tab in vcac

    I am facing this problem this catalogue request does not show property tab in vcac.