Hauppauge win tv

Similar Questions

• problem is with media center (blue screen) have hvr 1600 hauppauge win system is acer aspire m100 2 GB ram

  Windows media center (blue screen) and live tv hauppauge tv 1600

  Hello

  Best estimate is video driver related but the real error code would help to determine the cause and the best solution
  of the action.

  Look in the Event Viewer to see if something is reported on these reboots.

  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I have a satellite card installed in my computer very good images sound.a hauppauge win tv and radio and tv

  It is now possible for me to run my satellite map in my windows media player 11. (I have windows vista ultimate.if it is possible can you tell me what to do.so that I can watch the TV channels in my media player.i have been informed that it is possible, but don't know how to do it.please can you help.one problem is I'm not upward on computers because of my age .but wouldn't be able to burn a few programes in mymedia player.because produce inwintv images is very very good .and shame) not being able to burn them down please help.waiting your answer

  Hello dunfordbob,

  Thank you for visiting the Microsoft answers Site.

  Which edition of Windows Vista you have installed?

  You can use Windows Media Center to watch and record live TV in addition to the Wintv application. Windows Media Center is included with Windows Vista Home Premium and Windows Vista Ultimate Editions.  In addition, Windows Media Center is available in Windows 7 Home Edition Premium, comprehensive, professional and Enterprise edition.

  For more information about using Windows Media Center to watch and record live TV, you can view the link below:

  Getting started with Windows Media Center

  I hope this information is useful.  Please let us know if you need more assistance.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hauppauge Win TV - HVR 2250 PCIe

  Is it possible to install this card in my server ESXi 4.0 and access it from a Windows XP VM?

  Thank you

  No, it is not possible - the video card used by the virtual machine is completely virtualized.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Who owns the Hauppauge WinTV 885?

  When I started my computer Windows me reported that he had found a new device and want to install the new driver. The rest of the message is:
  Multimedia video controller
  A problem with your TV Tuner
  TV Tuner stopped working because a compatible driver is not available for this version of Windows. The name of the model of your TV Tuner is Hauppauge Win TV 885 {CX 23885 EEprom}.
  I contacted DVICO, the TV tuner installed on my computer. They informed me that the Hauppauge WinTV 885 product isn't theirs.  Anyone met with this product and knows what it's related to? I tried searching but am not very computer savvy.
  Thank you

  http://www.Hauppauge.com/

  Their Home Page at the link above.

  Here, there is a support link.

  See you soon. Mick Murphy - Microsoft partner

• Windows Media Center will not play a DVD, I get video with a loud noise and no soundtrack.

  When you try to play a DVD in Windows Media Center or media player, the video starts, but there is a loud cracking sound with no sound of music.   This Media Center has played the DVD in the past.
  My system is: Vista Home Premium
  NVIDIA GeForce 8500
  Hauppauge Win TV HVR-1600
  Realteck HD audio
  ViXS Pure TV - U 48BO
   
  I checked these devices using HP Hardware Diagnostic tools and they work.  I uninstalled the drivers and reinstalled.  Also updated all the drivers.

  Reading this forum, I tried to delete the file from library: %LOCALAPPDATA%\Microsoft\Medial Player

  So far, nothing has solved the problem.

  Thank you for your response.

  I went through the steps.  He has not fixed the problem.  The good news is that I stumbled upon a fix.  I've uninstalled and reinstalled the Realtek Audio drivers.  Which corrects the problem.

  Thank you.

• Which TV Tuner/Capture card?

  Hi people.
  Here is my Config to the computer.

  Intel Core i7 920
  Gigabyte GA-EX58-UD5
  Corsair 6GB @1333

  Tagan BZ 800W PSU
  Sunbeamtech RTC 120
  XFX Nvidia GTX260
  Hauppauge WinTV PVR 150
  Seagate 1.5 TB * 2 + 1 TB HARD drive
  Vista 64-bit
  NAGRAVISION NAC - 510i STB (Set top box)

  What I need to know, is what card TV Tuner/Capture internal should I go for as the Hauppauge WinTV PVR 150 does not work well beyond 4 GB of RAM. To use it, so I need to limit my RAM less than 4 GB.
  The quality is good enough to view and capture. But I don't want to use the work around or reduce my RAM.

  Please suggest me a good internal TV Tuner/Capture card that works with my PC config and allow good capture. I also intend to upgrade to Windows 7

  Current models available in India:
  Hauppauge WinTV USB2-Stick TV TUNER CARD
  Hauppauge WinTV HVR-1100 internal
  Hauppauge TV Tuner card
  Hauppauge Win TV PVR USB2 MCE Kit - OEM
  Hauppauge MediaMVP
  Hauppauge WinTV-PVR-350 TV Tuner card
  Hauppauge WinTV-PVR-500 MCE TV Tuner card
  Hauppauge WinTV PVR 150 MCE Kit - OEM

  Note: I have a Coolermaster CM690(Mid-tower) because of who I am able to use only one PCI and one PCI-E slot. I need a PCI card. Or external case.

  PS. : I can try and a delivery from newegg or amazon to my country

  It's really a personal preference type of question.  You might consider contacting the manufacturer is to see the compatibility of Windows 7 is going to be.  Regarding delivery to your country it is a question to ask the retailer you are dealing with. Locutys of Borg

  Resistance is futile

  If you don't succeed the first time skydiving probably isn't for you!

• Windows Media Center will not receive a TV signal

  My Windows Media Center worked very well and I was receiving many channels of television to the present. This morning I had to uninstall my 2009 trend micro software and then install the software of micro trend 2010. All this went well and it had no effect on Windows Media Center. I then tried to watch TV and I get an error message saying: TV stations must be offline or check the attenna. I get channels on my regular TV so TV stations broadcast. I disconnected my attenna and plugged into a different attenna. Still nothing. I tried to reconfigure WMC for a tv signal and I get a message saying that nothing can be found. I try manually configure and I get a message saying that a Hauppauge WIN TV 885 is available but is not selected. So I guess there is a problem with the Tuner? Everything worked fine yesterday.

  Hi trialbyfire,.

  You can read the following article and check if it helps:

  Error message when you open Windows Media Center TV Pack and tune in to a channel that is listed in the electronic Program Guide: "TV Signal No."

  http://support.Microsoft.com/kb/955485

  You can also check out the following link and check if it helps:

  Solve problems with watching TV on your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• TV tuner

  I have a HP pavilion s5360f that since switching to the digital doesn't workIt is a Hauppauge Win TV HVR-1255(model 22xxxHybrid ATSC/QAM). It is digital?

  I think you must ask Hauppauge

• Media Player will not play sound on DVD.

  When you try to play a DVD in Windows Media Center 11 or media player, the video starts, but there is a loud cracking sound with no sound of music.   This Media Center has played the DVD in the past.
  My system is: Vista Home Premium
  NVIDIA GeForce 8500
  Hauppauge Win TV HVR-1600
  Realteck HD audio
  ViXS Pure TV - U 48BO
   
  I checked these devices using HP Hardware Diagnostic tools and they work.  I uninstalled the drivers and reinstalled.  Also updated all the drivers.

  Reading this forum, I tried to delete the file from library: %LOCALAPPDATA%\Microsoft\Medial Player

  So far, nothing has solved the problem. Neither thought I solved the problem by updating the Realtek audio driver, but he's back to do the same thing.  The only change on my computer has been automatically updated from Microsoft. Is it possible, there is a cause of conflict by an update?
  

  Are there still more recent versions of the driver at HP (even if not on your specific system page) or
  site of the manufacturer of the real device? Try installing the latest driver and BIOS and all the
  latest drivers and a mastery of the software (if any).

  Check these issues with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Tuner tv WinTV-HVR - 950Q with built in ir does not work in WMC

  I am running Windows 7, 64 bit. I use a Hauppauge Win TV - HVR - 950Q with IR, tv tuner built-in and I also have a remote control supplied with the tuner. I connect to a cable box. During the implementation of WMC, I get an error message that says THAT WMC cannot detect any IR material. Someone at - it successfully implemented this particular tuner? If so, can you tell me how did you have the IR error message. Any help would be greatly appreciated.

  See http://www.hauppauge.com/site/support/support_mce.html.

  You need the driver package to present the Media Center IR Hauppauge remote control.

• Windows 8 core security check failure... help please...

  I have an ASUS X502C with windows 8, I try to install and run the WinTV - HVR-900H tv t hybrid. Whenever I have try adjusting the handle of the computer displays a blue screen with the kernel security check failed.

  I had the computer controlled by the store that say that there is nothing wrong with the laptop. I was in contact with the WinTv Hauppauge company several times and done every thing they suggested for a free installation of error, but I am having no joy.
  Any ideas of what to do next? any help would be graciously received, thank you.

  Good looking

  The files were perfect and the solution is not too expensive.

  These were related to 3 things combining to produce the accident.

  1 - Aicharger.  Associated with the driver ASUS AiCharger.sys from ASUSTek Computer Inc. charger.

  2 - about the hcw66x64.sys Hauppauge WinTV HVR-900-Stick of Hauppauge Computer Works, Inc.

  These two are the USBXHCI. SYS accident (XHCI Microsoft Corporation USB driver)

  I would like to delete Aicharger (you can change the devices using USB only), update the driver for the Hauppauge Win - TV (I suspect it is the real cause of the accident) as yours is almost 3 years old.

  After the two above if you continue to crash, I would run a check of system files to check the USBXHCI. SYS driver.

  Please run a check of system files (SFC) 

  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• Cannot capture hdv with Premiere Pro

  I'm having a hard time capturing video from my camcorder high definition of Sony HDV - HC7. I am running Premiere Pro CS4 on a DellStudio running under Win 7 64 bit Ultimate system. It has a processor intel i7 CPU (8 cores) with 12 g of RAM.
  
  When I run first and select Capture it opens the capture window properly and allows me to control the camcorder. The camera is connected and working. However, it will not capture. I tried to capture several ways:
  
  1 connect the entry points and on the tape and then do a batch capture.
  2. Enter the whole band.
  3. manually press record at the correct stage is spotted on the camcorder.
  
  Each time the result is the same, nothing is captured. The meter reading displays the band plays and I can see the band playing, but the length of the recorded scene remains at 00:00:00
  
  I am connected via (camera) 4-pin to 6-pin (computer) via firewire. I tried two different firewire cables to ensure that it is not a cable problem. I don't have a capture card dedicated unless my Hauppauge Win TV HVR-1250 can be considered as a capture card. My firewire is out of the system tray, so I did not have a dedicated in system firewire card.
  
  I went through Adobe troubleshooting advice and none of these options helped.

  1. my hardware meets the minimum requirements

  2. recreate (even reinstall) cache does not help.

  3. I have tried two different bands with the same problem

  4. the connection cables work. I even tried two different firewire cables. The two show an iLINK on the camera connection and the capture window can control the playback of the camera without any problems.

  5 scene Detect is grey so I can't turn off, but I don't think it plays a role in the HDV capture.

  6. I checked my device control settings. The unit is set to sony and 1 alternate. I put it this way because I could not capture anything on the standard. I tried this setting and have captured a clip. After that, I could capture is no longer on the new setting. Even though I'm set to Standard or its replacement, the status of the camera is online.

  7 capture with another utility. I tried the software to capture from sony as well as first elements 8.0 and I have the same problems.

  8. make sure that all of the video was made. They are.

  9. Select playback (set to auto) settings.

  10. I'm logged on as an administratore

  11. I don't have a capture card. Do I need one?

  13. I run it with no other current main program execution.

  14. all my drivers are up to date.

  15. my video card driver is current.
  
  I must add that I have the same problem, try other software like Premiere Elements 8.0 and Sony Picture Motion Browser, so I think it's a hardware problem.
  
  I appreciate any suggestions. Do I need a dedicated video capture card? If so, what do you suggest me? Do I need a Firewire 4 pin, rather than a 6 port pins? Do I need a dedicated sony cable as suggested in some forums?
  
  Thanks in advance.
  
  wcameron

  my gut feeling is that the built-in firewire is not good. but before part you with little money for a PCIe version, it is possible, that you can test the device on another computer? just to rule out the camera itself.

  try to avoid really cheap FW cards. I envy those who have a TI chipset, but it's just anecdotal.

  MP

• No help from the i7 Lenovo Sound win the premium 7 64 home after installing the card TV Hauppauge 2250

  Hauppauge support gave up. They never seemed very interested. TV card has been deleted, but its not returned.  Nothing on the computer that is supposed to produce a sound made.  Video functions on the TV card are fine.  TV card is now back in.

  Thanks for your suggestions

  Ken

  E-mail address is removed from the privacy *.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• How is it difficult to remove Win 8 h9 WANT Phoenix computer and install Win 7 Home Premium?

  How difficult is it to remove a Windows 8 OS preinstalled on a new computer from h9 WANT Phoenix and replace it with Windows 7 Home Premium OS? Does anyone do this? If so, what kind of problems face?  In addition, you have all of the recommendations regarding this?  Where did you buy the Windows 7 program.  I am interested to do a clean install of Windows 7 Edition family on a HP ENVY Phoenix h9-1355 computer.

  You must DISABLE 'Secure Boot' and ENABLE 'Legacy Support' in the BIOS, then save these changes. The next time you start, you enter the code provided to accept the previous changes. You must start the Windows7 as UEFI media to install Windows 7 on the GPT partitioned hard disk factory. You can buy a copy of Windows 7 with a valid key to install it.

  The drivers below should do the trick, if you are bent on installing Windows 7.

  Intel Download Center (Use the Intel driver update utility to scan your system for drivers up to date automatically and install it quickly).

  AMD display driver (except HD 7770 is highly customized by HP)

  Broadcom wireless network controller driver

  Driver Bluetooth HP

  Qualcomm Atheros Customer Portal (select "Family AR816X drivers", "WIN AR816X Windows WHQL driver", use WinRAR or similar to extract)

  Hauppauge ATSC/NTSC/QAM TV tuner (Maybe not the correct driver)

  Please send Bravo