Hauppauge WINTV-HVR-1600 NTSC/ATSC

Similar Questions

• How much is a map of Tuner TV Hauppauge WinTV-HVR - 950Q?

  How much does it cost?

  http://www.Amazon.com/Hauppauge-WinTV-HVR-950Q-personal-recorder-control/DP/B001DEYVXO

• Windows update fails error Code 800F020B Hauppauge Computer Works WinTV HVR - 950 a ATSC/QAM valve

  Device Capture of Hauppauge Compuer Works, Inc. - Streaming Media and broadcast devices - WinTV HVR - 950q ATSC/QAM

  Installation date: 01/08/2009-10:55 (on build 7100 Windows 7 RTM)

  You may have to restart your computer for this update is taken into account.  (not restarted, update optional removed, the equipment does not work)

  Installation status: failed

  Error details: Code 800F020B

  Undate type: Optional

  Release of updated software Hauppauge Computer Works, Inc. Streaming Media and Drvices released in May 2009

  More information:
  http://winqual.Microsoft.com/support/?DriverID=20283357 (content is set to null, only placeholder)

  Help and Support:
  http://support.Microsoft.com/Select/?Target=Hub (how I arrived here to connect the update failed)

  Made repeated attempts with HVR-950 a device plugged upward, not blocked, etc.  Still didn't update installation.  Finally did me not able to not try again, no uninstall process defined in the current detail informaiton failture.

  Hello GrayWin7,

  Thank you for choosing Microsoft answers forums for Windows Vista. I hope you do well.

  You may need to update the drivers here. Please check the link for more details below:

  http://windowshelp.Microsoft.com/Windows/en-us/help/b293f652-20ed-4D34-af07-f2cba6fe68f51033.mspx

  Alternatively, you can try to perform a clean boot:

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Follow the link for more information below:

  http://support.Microsoft.com/kb/929135

  Hope this information is useful.

  Thank you.

• channels digital vs analog with Hauppauge WinTV - HVR 850 with Windows Media Center

  I just bought a Hauppage WinTV - HVR 850 hoping to be able to use my computer as a DVR and record some TV series.

  Do not have an HD antenna on our House and have basic cable (which has analog channels, but we can also take digital channels on our tv, which has a tuner).  When I plugged the cord to cable TV from the wall outlet at the end of this device, he searched and found only the analog channels (I tried with only the antenna mounting and it is like 3 stations).  I recorded a show on one of the analog channels and it was fuzzy.

  Is it possible to hook it up to my computer so I can get HD cable channels?  We will get an HD soon of our cable company box.  I wonder if he has 2 'out', so I could split that and I have only once to my TV and the other which could plug into this Hauppauge thing? Or the device will do only analog cable and HD with the antenna?

  Any other suggestions?

  You can return the tuner?
  The HVR-850 is a cable analog / ATSC tuner.  It cannot set Clear-QAM (digital cable clear.)  I'm sorry.
   
  The HVR - 950 Q can set Clear-QAM, however.  Note, however, that this Tuner cannot be switched on the fly between modes - you choose which you want (analog cable, or clear-QAM) during the TV configuration.
  

  There are a lot of tuners out there which, frankly, are far more capable than what is the HVR-850.
  Is this a desktop or a laptop?  If a desktop computer, what you have for the available expansion slots: PCI, PCIe, or not at all?

  Another question / comment:
  Media Center for Windows Vista can't Clear-QAM, unless your version includes TV Pack 2008 (not available for download, by the way.)  "It was an option installed by OEM).  Some manufacturers of tuner, however, provide "workaround" pilots who are MC think it's a tuner ATSC (which is supported.)
  Could you at tasks > settings > General > about > version of the software and after the version number that appears there?

  Kind regards
  Chris

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• What should I do to get my card of Tuner TV Hauppauge WinTV-HVR-1800 on another computer?

  I'm taking this card on a HP Media Center PC and put it in a HP PC replacement. What cables are needed as I dropped the 'wired' cables in the old PC. It seems that they were connected to the grid and taken them before. This card will interfere with anything, or is it a standalone and ok to reinstall it on another PC?

  I'm taking this card on a HP Media Center PC and put it in a HP PC replacement. What cables are needed as I dropped the 'wired' cables in the old PC. It seems that they were connected to the grid and taken them before. This card will interfere with anything, or is it a standalone and ok to reinstall it on another PC?

  Ask in Hauppauge.  It is a hardware problem - not the software and not a Microsoft product.  Your best support comes from those who did and therefore take over the product.

• Who owns the Hauppauge WinTV 885?

  When I started my computer Windows me reported that he had found a new device and want to install the new driver. The rest of the message is:
  Multimedia video controller
  A problem with your TV Tuner
  TV Tuner stopped working because a compatible driver is not available for this version of Windows. The name of the model of your TV Tuner is Hauppauge Win TV 885 {CX 23885 EEprom}.
  I contacted DVICO, the TV tuner installed on my computer. They informed me that the Hauppauge WinTV 885 product isn't theirs.  Anyone met with this product and knows what it's related to? I tried searching but am not very computer savvy.
  Thank you

  http://www.Hauppauge.com/

  Their Home Page at the link above.

  Here, there is a support link.

  See you soon. Mick Murphy - Microsoft partner

• WinTV-HVR 850 play on WMC-TV, but there is no sound

  I bought an external TV tuner for my laptop: WinTV-HVR 850 per Hauppaugel.

  My HP laptop with Windows Vista 32 bit more than the manufacturers minimum system requirements for installing tuner.
  After installing the tuner software, I installed the TV setup in Windows Media Center.
  At the beginning everything has worked... Now, all I'm getting is image but no sound.

  Hello

  I suggest you try the steps from the link below and check if it helps.

  Audio problems in Windows Media Center:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-problems-in-Windows-Media-Center

  Hope this information is useful.

• tv tuner (ntsc/atsc) combo of ViXS pure tv - u 48a 3 not detected by windows media center vista

  I have a setting wrong in Windows Media center. It does not recognize my tv tuner; Pure TV - U 48 VIXS has 3 (NTSC/ATSC) Combo. I'm working on a HP Pavilion Slimline s3120n running Vista Home Premium.

  Hello

  ·         You did changes to the computer before the show?

  Step 1: You can try to install the ViXS Pure TV - U TV Tuner Driver Update and check if it works.

  ViXS Pure TV - U TV Tuner Driver update improves compatibility with some cable TELEVISION systems.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-56966-1&cc=us&LC=en&DLC=en&product=3613143&DLC=en&lang=en

  Step 2: You can uninstall and reinstall the drivers from the link below:

  Pure TV - U 48 ViXS has 3 TV Tuner Driver

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-50069-1&LC=en&cc=us&DLC=en&product=3385413&OS=2093&lang=en

  Step 3: Please have a read of the article below:

  Error message when you run the installation process of Run first of Windows Media Center in Windows Vista: "Tuner not found".

  http://support.Microsoft.com/kb/934531

  Error message that you receive after you configure Windows Media Center without connecting to the Internet: "No Tuner available".

  http://support.Microsoft.com/kb/929453

  Step 4: Solve problems with watching TV on your computer

  http://windowshelp.Microsoft.com/Windows/en-us/help/d4dce2d3-0388-43b1-8880-7d6823d0eb9f1033.mspx

• Installed Hauppauge winTV. How to configure Windows Media Center.

  Original title: Media Center

  just intalled hauppauge winTV v7.2 HD card. now... How to WINDOWS MEDIA CENTER (or install or what...) I'm Feelin ' very stupid rite now), which is supposed to be included with Windows 7

  computer search and found the installer, thank you anyway

• problem is with media center (blue screen) have hvr 1600 hauppauge win system is acer aspire m100 2 GB ram

  Windows media center (blue screen) and live tv hauppauge tv 1600

  Hello

  Best estimate is video driver related but the real error code would help to determine the cause and the best solution
  of the action.

  Look in the Event Viewer to see if something is reported on these reboots.

  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Tuner tv WinTV-HVR - 950Q with built in ir does not work in WMC

  I am running Windows 7, 64 bit. I use a Hauppauge Win TV - HVR - 950Q with IR, tv tuner built-in and I also have a remote control supplied with the tuner. I connect to a cable box. During the implementation of WMC, I get an error message that says THAT WMC cannot detect any IR material. Someone at - it successfully implemented this particular tuner? If so, can you tell me how did you have the IR error message. Any help would be greatly appreciated.

  See http://www.hauppauge.com/site/support/support_mce.html.

  You need the driver package to present the Media Center IR Hauppauge remote control.

• Hauppauge wintv hvr1950 driver

  After having a terrible time, installing drivers for Hauppauge usb tv tuner.  I managed to install the equipment on a laptop in my house which has exactly the same OS (Windows 7 Professional 64 bit).  The material is recognized, but the drivers do not properly install any technique I try - the manufacturer's CD, downloaded the drivers from the manufacturer, update the driver in Device Manager - none of these work correctly.  I also tried the update automatically metrhod and have meythod of disk.  The manufacturer has abandoned and cannot solve the problem.  I have to clean install the OS again?

  As you suggest, a new facility did the trick.  The device installed instantly, no problem.  I have now another problem, but that is probably not on the Microsoft page.  The problem is that when I scan the channels and FM frequencies, it does not find the channels or radio stations!  I know that the external antenna works very well because I have a big screen HD TV set at the same antenna and that it receives a beautiful picture and sound at least 20 channels.  The FM antenna that I use is the little folded dipole that comes with the tuner.  The FM signals in this area are very strong and a wet noodle had to collect at least 25 stations.  My stereo (in the same room) has essentially no antenna on it and it gets more stations that I can handle so I don't know that it is not a signal strength.  I'll take that one to the top with Hauppauge.  Once again, thanks a lot for your help (if nothing else, you waded in my terrible tale of evil!)   Merry Christmas to you.

• Are there drivers for Windows XP Pro AverMedia M791A - NTSC/ATSC TV Tuner Card?

  With the help of a gateway 838GM desktop with Windows XP Media Center 2005 and need to know if the AverMedia M791A PCI-E TV Tuner card is comapitable?

  Hello Usercp4749,

  Thank you for your message.  Your gateway 838GM come with this Tuner AverMedia M791A card or do you have it after the market?  After a little research, it doesn't seem to be a driver available for download.  Do you have a driver when you bought the computer or buy the Tuner card?
  If you got the bridge, please contact Gateway to obtain the appropriate driver.  Their contact details are below:
  http://support.gateway.com/support/ask_gateway.aspx
  If you got the Tuner card after market, you should contact AverMedia.  Their contact details are below:
  http://support.aver.com/
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Dell USB external TV Tuner NTSC/ATSC...

  It goes to its kind of dumb, but when buying my system it says that this thing was $0... Then, evil take if free, safe! But, Ive had for 6 months now, and I always used havn't it... probably because I still don't really know what he does... he can do? can I use it so my TV is an external Bayram? or is she just entered?

  
  

• HP w2207 fails each update HP (monitor works perfectly)

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  Purchased in 2008, the computer and the monitor purchased separately... Monitor has never had a successful update, works perfectly except Corel Win DVD 2010 will not play any DVD. message reads as follows: your display environment doesn't support protected content I thought that if I could update the drivers of HP my DVD would work. Maybe it's 2 problems, would be very grateful if someone could point me in the right direction... Thank you HP-Pavilion, GG056AAR - ABA a6157c System serial number: [text removed for privacy] Case type: Desktop Monitor: HP w2207 Windows Vista Home Premium Service Pack 2 (build 6002) Install language: English (United States) Local system: English (United States)
  Processor		Circuit main b
  2.00 gigahertz Intel Core 2 Duo cache of 64 kilobytes main memory secondary memory 2048 k-cached 64-bit ready Multi-core (2 total) Not hyper-thread		Map: ASUSTek Computer Inc. Leonite2 6.00 Serial number: MS1C76S00402276 The bus clock: 200 MHz BIOS: Phoenix Technologies, LTD 5.17 20/04/2007
  Readers		C and d memory modules
  320.07 capacity disk hard usable GB 226.52 gigabytes of free disk space HL-DT-ST DVDRRW GSA - H30L [scanner] Generic - Compact Flash USB Device [hard drive]--drive 1 Generic-MS/MS-Pro USB Device [hard drive] - disc 4 Generic-SD/MMC USB Device [hard drive] - 3 drive Generic - SM/xD-Picture USB Device [hard drive] - Player 2 SAMSUNG HD320KJ [hard drive] (320,07 GB) - disk 0, SMART location: healthy		Usable 3574 megabytes installed memory Slot 'A0' has 1024 MB Slot 'A1' has 1024 MB Slot 'A2' has 1024 MB Slot 'A3' has 1024 MB
  Controllers of		Display
  Channel [Controller] Intel (r) 82801G (ICH7 Family) Ultra ATA Storage Controllers - 27DF		Intel (r) 82945G Express Chipset Family [graphics card]
  HBAs		Multimedia
  Intel (r) 82801 GR/GH SATA RAID Controller Microsoft iSCSI initiator Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27 8 Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27 9 Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27CA Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27CB Intel (r) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC		Hauppauge WinTV HVR-1600 NTSC/ATSC Combo Realtek High Definition Audio

  The protected content message could be caused by a number of elements.  Your monitor must be connected with a DVI cable that is HDCP. Your video card must support HDCP, and finally the video card driver must support HDCP.  The PC may need to be required to manage the video stream protected content.

  I see that the motherboardof your PC has only VGA, so if that's how your monitor is connected, then this is probably the issue.  Install a discreet video with a DVI card and then use a DVI cable would probably solve the HDCP issue.

  Install a discrete video card could also mean that you need to supply. Unplug your computer and open it. Read the label on the power supply unit (PSU).  What is the total power and amperage on the bus + 12 volt?  The amount of amperage + 12 volts is important when choosing a video card.