Similar Questions

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• iPhone 6 Apple Watch and BlueAnt q3 does not connect at the same time.

  IiPhone 6 + Apple Watch and BlueAnt q3 does not connect at the same time

  My Apple Watch and Blueant Q3 connect at the same time. You try to connect the Q3 and the watch to the iPhone, or you try to connect the Q3 of the watch?

• My laptop has not been used for a year and now does not connect to wireless internet?

  My wife's cell phone has recently been repaired (power Cable plug damage) and has been missing for a year. We both used my laptop which connects to the internet just fine. The laptop connects to the network but does not connect to the internet. I tried all suggestions that our Windows Diagnostics, as well as other ideas for myself but had no chance. The continuous diagnostic message to read "cannot communicate with primary DNS 194.168.4.100 server. My only thought is that perhaps because of the amount of time it has been used as the network driver can be updated, although I don't know how to upgrade without connecting to the net?

  Hello

  Follow the suggestions and then check:

  Method 1.

  Let us reset TCP/IP and check.
  To reset TCP/IP stack to go to this article and follow the instructions.
  http://support.Microsoft.com/kb/299357
  
  Method 2.
  Step 1.
  1 connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
  2. make sure that you are in Setup-> basic configuration category.
  3. scroll down until you see "DHCP Server" - if it is disabled, select 'enable '.
  4 enable DHCP if you want, you can change the number that starts the DHCP IP setting. (This is optional)
  5. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.
  6. scroll and click 'Save Settings'.

  Step 2.
  1. click on start and then Control Panel.
  2. go to network and sharing Center and then click on change adapter settings.
  3. right click on the connection to the Local network and select Properties.
  4. Select Internet Protocol Version 6, and then click Properties.
  5. select Obtain DNS server automatically an address and press Ok.
  6. choose obtain an IP address automatically.
  7. repeat the steps for Internet Protocol version 4 as well.

  See also:

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems Using event logs Windows Network Diagnostics to troubleshoot network http://windows.microsoft.com/en-US/windows-vista/Using-Windows-Network-Diagnostics-event-logs-to-solve-network-problems

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I need to activate a computer but do not have a phone and it does not connect to the internet how to activate it?

  OK, so I have the disc and its application to connect to the internet or call but I don't have a phone and I have another computer. is there anyway that I can activate it online from another computer?

  Please see: How to find a phone number for a Microsoft Product Activation Center

• Download iso file of windows 7 does not give me the iso file. Help, please!

  so I bought windows 7 Home premium on discount for students. I received a confirmation email telling me to download either an EXE or ISO file. I decided to download iso, however, after I finished downloading and extracting the zip file, I got a folder (name X 15 65733) and inside does not contain an Iso file. Instead, it has a bunch of folders and files, one of them is called setup.exe. I click on the file setup.exe, which explain that the setup.exe is not a valid win32 application.

  so I can not upgrade my windows xp to windows 7 right now, let alone burn it to a dvd. can someone please? Thank you!

  The X 15 65733 file is the file .iso Windows 7 Home Premium image. You have to burn to a dvd as a bootable disk to install Windows 7.
  David

• BlackBerry Smartphones installed BBDM 5.0 and it does not connect to the device

  I upgraded from 4.6 to 5.0 BBDM and since the BBDM does not recognize my Curve 8330.  Follow the instructions in troubleshooting and they do not seem to work. Do a soft reset and it has not fixed either.  Get always "none" in the PIN field on the bottom right of the homepage BBDM. Any other suggestions?  . . . I've updated because the Roxio Media Manager was not working in 4.6, nor was I able to sync contacts or calendar with Lotus Notes 8, in order to reverse does not seem to be a good option.

  Hello and welcome to the Forums of Support BlackBerry.com.

  Try to disconnect the BlackBerry to the PC, turn off the PC and allow it to restart.

  Meanwhile, with the BlackBerry device powered on, remove the battery for a few seconds and then reinsert the battery to restart.

  Make sure your USB cable is talk to a usb port of the PC, not a USB hub or REAR port PC before.

  Try again to establish the connection.

• Problem with Windows Fax and Scan does not connect to the Internal Modem

  Just got a new Acer Aspire 5542-5416 computer laptop with Windows 7 64 bit Home Premium, 4 GB of Ram and a 320 GB hard drive. It has a 56 k modem integrated fax of like the old days, but I can't make it work. The laptop did not come with the Windows CD.

  If I open the program Windows Fax and Scan, it is not able to connect to the modem. Basically, if I click on tools > fax accounts > Add..., I get a box with 2 choices: to connect to a fax modem or connect to a fax on my network server. When I want to connect a fax modem I get a message that says: an error has occurred. Please, try the operation again later or contact your administrator. It allows me to do this then just clock OK and them I'm right where I started.

  While in Windows Fax and Scan, if I click on tools > fax settings... nothing happens. No menu settings or anything ever appears. Quite simply, the program does nothing. If I try tools > Fax Status Monitor... I get a box that says entrance exam status, ready to receive a fax. It has a blue progress bar as something takes over, but it gets about 1/100 to and never goes further or ends. There is no box, but there are 3 buttons: view details, answer call or cancel. If I hit details, I get an empty list. If I click on answer call I get an error that says that the fax service is not available.

  If I try tools > Options, general tab has only a single option box is checked: play a sound when come it to new messages. If I try to print a Word or PDF file to a fax using Fax in the printer list, I get the same box with 2 choices: to connect to a fax modem or connect to a fax on my network server, but I get the same error message: an error has occurred. Please, try the operation again later or contact your administrator.

  I've searched the Internet high and low for a solution but no luck. There is a lot of discussion about this problem, but none of the solutions work for me. If I go to Device Manager, the modem is working properly and if I click on the Modem query on the Diagnostics tab, it seems to be able to communicate with the modem very well. I tried to roll back the driver and updated again and still no luck, same problem. If I go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fax\Accounts in the registry, there is no subkeys under the folder accounts I can delete.

  Has anyone else had a similar problem? Is there any solution for this? I did a Windows Update last night and has not yet solve it. Thank you.

  Sorry about that.

  Here is the link:

  http://social.msdn.Microsoft.com/forums/en-us/windowscompatibility/thread/c75ae899-D05B-411D-a7f2-00fdd33b8589/

• Satellite L735 does not connect to the internet (wired and wireless)

  Hello

  I have a brand new L735 satellite, and I'm having a lot of trouble with internet connections.

  When I connect to a wireless network it is the profile and connects but still then doesn't say: "no internet access" for two IPv4 qnd IPv6 connectivity status.
  I tried troubleshooting, turing off the computer, and wireless network and stil back, but it does not.

  The same phenomenon occurs with the workplace wireless, despite other computers that connect to this good (so it does not come from the networks). I also tried to connect to work with an ethernet cable but no luck.

  I have the Atheros AR9002WB-1NG wireless network card and the Atheros AR8152/8158 PCI - E Fast ethernet controller.

  I don't know what to do as the laptop is new and so it should not need to updates, all parameters are default, etc.. I'd appreciate some help here!

  Hello

  Uninstall or disable the TCP/IPv6 and use only TCP/IPv4 protocol.
  Also check whether in the properties of TCP/IPv4, IP address and other parameters are defined to assign automatically

  I recommend also check the firewall and some security applications that may be preinstalled on your laptop.
  It might be possible that antivirus or firewall block the laptop to connect to internet.

• I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

  Hello

  I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
  Any suggestions?
  original title: connectivity Limeted

  The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

  Your messages are a bit terse, but if I understand correctly

  • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
  • All but one of these computers can reach successfully from the Internet via the router.
  • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
  • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
  • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
  • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

  Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type the following lines and press ENTER after each line

  Netsh reset winsock catalog
  netsh int ip reset c:\resetlog.txt

  Close the command prompt window and restart the computer.

• iPhone and iPad does not connect to internet

  Hello

  Since yesterday, I was unable to connect to internet via wifi on my iPad and iPhone.  They show the power of the full signal and says I'm connected, but won't load Web pages or refresh applications.  When I disable wifi on my phone everything works fine on the LTE, but I don't want to use my data.

  I think it must be something with the update iOS because:

  -J' completely rebooted our router and modem and it worked on my iPad for about 30 seconds (what makes a Web page) before it stopped working again.

  -My boyfriend did not the last update on the iPad or iPhone, and both connect on our wifi at home, while my iPad or iPhone will connect to the internet.

  -My iPhone also does not connect to the wifi in my work, even though I know it works as I am online on my computer work via wifi.

  I noticed something strange on my iPhone and iPad when I went to check the settings wifi yesterday - the VPN configuration is flashing/refreshing without touching me, even if I don't have everything set up VPN connections.  When I actually click on VPN, an error is displayed.  There may be something wrong with the VPN on the new update which blocks the wifi signal?

  
  

  I really appreciate your help!
  

  If you are able to connect your iPad and iPhone to your wireless router agreement but the iPad and iPhone will not connect to internet, it is unlikely to have anything to do with the version of iOS.

  Try this:

  Restart your router (unplug unit, wait ten seconds and then reconnect it).

  Wait for the router shows all lights normal and connected.

  Now, reboot your iPad or iPhone

• I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection.

  I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection. It connects to other networks wifi very well with Internet access, is that the wireless in my house what it connects to. When I diagnose the problem, it says "Cannot communicate with DNS server (208.67.222.222)", and then under that it says: "languished network diagnostics remote hosts, but had not received a response." It connects to the Internet through an ethernet cable, but it is rather annoying pulling the cable autour. I currently have Windows Vista Home Premium. Thank you!

  original title: Internet connectivity problem

  Hello

  Now, you may need to contact the support of Panda Internet Security centre to change the settings so that wireless is enabled through it.

  Support link: http://www.pandasecurity.com/homeusers/support/

• I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet.

  Connected to the new router, but locally only.

  Currently, I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet. The small icon to the left of my screen says only: ACCESS: LOCAL ONLY.
  BASICALLY,.

  I have Windows Vista Home Premium, notebook Compaq (Presario CQ60 to be exact)

  I can connect if I use a cable, but its disadvantages.

  I can connect wirelessly with my PC and Ipad. and Internet access.

  I TRIED:
  Various patches microsoft such as resetting TCP, safe mode with network, reset the router. »

  Thank you in advance and we hope you can answer this soon!

  I use an Atheros AR5007 802. 11 b / g WiFi Adapter(Compaq laptop) for the moment so this is useful. Thanks again!
  Someone suggested that I update my wireless driver. I am open to this idea, if anyone can find a safe and legal site with the download.

  Hi Bryyaan11,

  You can check out the link to HP support and try to download the drivers for your wireless card updated:

  Support HP & drivers

  For more information, you can also consult the following article:

  Updated a hardware driver that is not working properly

  You can also check the following items and try the steps:

  Windows wireless and wired network connection problems

  Solve problems, find wireless networks

  Hope this information is useful.

• Start the virtual machine and wait for WF, does not connect to the computer virtual for Vds (Windows 2008 R2)

  Hello

  See a strange problem with only a Windows 2008 R2 model. When you use the built-in function "Start VM and wait" workflow to start a virtual machine (after conversion from a template either manually, or through workflow) NIC of the virtual machine (I tried VMXNET3 and e1000 times) does not connect to the problem. Vds can be replicated in a different VCenter, so spreading the vds. I also created several models of Windows 2008 r2 and all have this problem.

  If the model is converted and started outside VRO, it gets an IP from and is connected to the VDS immediately

  Tried add/remove the NIC of the model

  Tried to move the comments on different hosts

  Tried to create a new template from scratch

  NOTE: Windows 2012 R2 doesn't have this problem in the same circles, the only constant is the Windows 2008 R2 being started by VRO.

  Anyone seen this before?

  I found this article and it fixed my problem VMware KB: registration or the deployment of a virtual computer model fails apparently a fix a problem in ESX 5.1, 5.5 (I used the option to get around and things are good)

• Bought LR6 DVD but the installer does not connect to the internet for I can register it.  I downloaded the trial version to work around this problem, but I can't get the program to start.  I get the same message that I should connect to the internet and c

  Purchase DVD LR6 Adorama, but Setup does not connect to the internet so that I can record.  Internet works fine.   I have Adobe account.

  I went to Safari to Chrome and downloaded the trial version in the hope to bypass the DVD version, but I can't get the program to start.    I get the same message that I should connect to the internet and connect.  It seems impossible after 3 hours.  Spent an hour chatting with the support of the India.

  Also remove the cookie file and reg Lightroom then enter the serial number and check.

  Windows:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  programdata %

  It will open the ProgramData folder. inside locate Adobe folder.

  Go to Adobe > Lightroom.

  Open Lightroom and delete all the files inside,

  Then run LR 6 and enter the serial number,

  Mac:

  (1) right-click on the icon in the Finder, then select the 'Go - To Folder' option.
  (2) you will get a text box, type in the following command and then press the 'return '. (" Do not miss ~ symbol" "')

  ~/Library

  It will open the folder of the user's library.

  (3) then navigate to Application Support > Adobe > Lightroom.

  Open Lightroom and delete all the files inside,

  Then run LR 6 and enter the serial number,