Have a Microsoft Lifecam and he just started to have a Lifecam.exe is not working error
LifeCam.exe does not work correctly and will close its doors has just begun to burst yesterday. I have all the updated drivers and firmware. I have no new schedule. He began to appear while I was skyping with my wife. Sometimes, I push the buttons to confirm and Skype still works with video and mic. But I can't open the lifecam program more.
The only thing that I would do a wipe my system and start from scratch.
Try the following steps:
Step 1: Put the computer to boot to determine the software causing problem
Followstep 1 in the link below,
How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7 :
If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you need to maybe update or install a newer version of the program, if you rarely use this software, you can consider
Important: n ' forget not the computer to start normal follow step 7 in the link.
If the problem persists,
Step 2: Download and install the latest version of the life CAM software
Step 3: Follow the steps mentioned in the article below which solves the following problem:
The problems of compatibility between life Cam and other programs
Afzal Taher - Microsoft technical support.
Visit our Microsoft answers Feedback Forum and tell us what you think.
The microphone on my new microsoft lifecam VX2000 works very well but the webcam does not work on Skype. Why?
You posted this in a forum dedicated to provide feedback on the web site of Microsoft Answers.
See if you can get answers in the forum "photo and video" depending on your version of Windows.
Today, I bought a Lifecam Cinema and I installed the Lifecam program but when I try to open the program I get the error message saying "LifeCam.exe has encountered a problem and needs to close. We are sorry for the inconvenience. "and the program stops.
I would really appreciate if someone can help me get this program thank you.
Call technical support, as you can see they were able to help the poster in the linked post.
After that everything else that tent quite detailed post, the only other thing to consider (in addition to support) is to return your operating system to factory defaults via the recovery options (after the recording of all useful data) and try once more the LifeCam. It is rather an overdose, which makes the Support technique the more viable option. If they were able to come back to these "geometric files", they may have other tricks in their bag?
I have Lightroom 1.4.1 and I just started shooting the Nikon D700. I can't Lightroom to read my new raw files, help... Y at - it a plug-in or update I can get? I can't afford new software after new camera and lens new!
Lightroom 1.4.1 does not support native (NEF) files from the D700 because the camera didn't even exist when it was released. To get help, you have two options: upgrade to Lr 2.x (paid for the upgrade) or convert your NEF files to DNG.
DNG 5.4 converter can be downloaded from http://www.adobe.com/downloads/ (see the right-hand side of the page)
Hi, I'm rookiee and I just started with the first steps of creating a Web site. the katies-coffee-building file is on my desk and uplouded in the library. That has worked well. Now I'm putting the button in Photo Shop (banner), I have pull down on file/pl
Message "Hi, I'm rookiee and I just started with the first steps of creating a Web site. the katies-coffee-building file is on my desk and uplouded in the library. That has worked well. Now, I'm putting the button in Photo Shop (banner) in. I pull down on the file Photo Shop button instead and try to select the Banner.psd file. Unfortunately all of the (active) folder is not accessible to all. One is not visibel. Please - need some help here. Thank you.
@Ach ja, meine Muttersprache ist Deutsch
You must use the file > Place Photoshop button (Cmd / Ctrl + B).
Well for a reason my first thread is not here so Im start again, I have IE8 and it just started with a lot of error reports and custom back to the homepage it just on the same page of the article, I was reading and said that this tab was recovered, I end up having to close on restarting the program n also since I reloaded my xp cd my sound got rough n jumps, it was well before I did this if Im not sure what to do. Im not exactly smart pc and am afraid of doing something wrong then Im left to do very limited things, any help would be appreciated
Because it looks like you have reinstalled Windows XP, what happens when you turn on your computer? Windows loads correctly and allow you to connect with success? Have you completed all the updates of Windows since the relocation? Do you get errors at any time?
What version of Windows XP you are using and which service pack is currently installed? I would say confirming all your drivers are recognized and updated.
Please let us know status.
I m problem that my computer automatically turns off (is not closed correctly at the time of the switches) and when I start it gives message that windows do not close properly seeded.
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Previously I was using WIndow Vista Home Premium but recently I installed Windows Vista Ultimate.I m having problem my computer turns off automatically (is not closed correctly at the time of the switches) and when I start it gives message that windows do not close properly seeded.
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Look in the Event Viewer to see if something is reported on those.
MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.http://www.winvistatips.com/disable-automatic-restart-T84.html
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
information on errors such as STOP and information such as IRQL_NOT_LESS_OR_EQUAL codes or
PAGE_FAULT_IN_NONPAGED_AREA and similar messages.
or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000
It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during "blue screen of death," collisionshttp://www.NirSoft.NET/utils/blue_screen_view.html
Displays information on all the "crash" of a table - free
BlueScreens many are caused by old or damaged, drivers particularly video drivers but it
are other causes.
You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.
This tells you how to access the System Recovery Options and/or a Vista DVD
You can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
The log can give you the answer if there is a corrupted driver. (Says not all possible
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
How to install a device driver in Vista Device Manager
How to disable automatic driver Installation in Windows Vista - drivers
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
Troubleshooting, STOP error blue screen Vista
Understanding and decoding BSOD (blue screen of death) Messages
Windows - troubleshooting blue screen errors
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
This tells you how to access the System Recovery Options and/or a Vista DVD
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
I am running windows xp on a computer dell laptop and just bought an acer H213H-screen that does not work.
I downloaded the driver appropriate on the acer site and installed. Also, I tried to reduce my resolution. None of them have worked. I get a message on the acer monitor that says "Input not supported"
You check the display settings and make sure that you do not have your resolution to high for this monitor. Its got to many many times.
Please rate me upward if you find my post helpful. Thank you!
ORIGINAL TITLE: HELP PLEASE
I had my hard drive wiped clear windows xp a friends vista installed by mistake and now I have my product key does not work what do I do? Help, please
But a vista license or re - install XP
My H5D-00003 Lifecam microphone does not work if the picture is fine
1. the device worked very well in the computer earlier? If so, remember any changes made to your computer before this problem?
2. what applications have you tried to use the Lifecam with? The problem occurs in all applications that use this camera?
Try the methods provided for in article below and check after each method:
(a) click Start, click Control Panel, click on herand select manage audio devices.
(b) select your USB device and select Properties, select levels.
(c) ensure that the microphone is 100%.
Method 2: Run Audio playback problems troubleshooting:
Method 3: Uninstall and reinstall the Lifecam drivers, downloading the drivers applicable from the following link:
It will be useful.
Just got a new webcam MS LifeCam Cinema that I ordered, but unfortunately, the software crashes. The question is not the device itself, because I can see the video in the video settings Live Messenger window, and the test microphone also works. However, whenever I try to run the software LifeCam itself, I get the pointer for a second, and then it crashes and I get the message "LifeCam.exe has stopped working".
I am running Vista Home Premium SP2 x 64, completely up to date with windows update. I uninstalled the driver from the CD and it redownloaded go web site (did not work). I checked all the posts on what I could find, the most common suggestion was to uninstall the Nero software, but I don't have any Nero software installed. Any help to get this thing to run would be really appreciated. I want to especially this for video recording, to get the LifeCam program to work is essential.
How many other USB devices attached to this machine? Are you using non-powered for connection hubs? I assume that you have already tried to connect to a different USB port on your computer? Rear ports are better than using all the front ports on most machines (due to wiring and connections, I think). If you change the Windows ports will really rediscover your hardware and quickly (without downloading) reinstall drivers current.
Here is the software available for your product. Follow the link to download.
"The LifeCam 3.2 32-bit and 64-bit for Windows Vista
"See the Readme of the LifeCam software
"Download the update of Firmware for your LifeCam Cinema
Something useful in the Readme, and did you also update the Firmware?
For what it's worth, it's only about a week ago when I was offered and downloaded updates via Windows updates for my LifeCam camera. That always seems to work correctly.
I need to know how to get my computer to the top and will again and without a hitch. When I turn on my computer, the Vaio logo has lines on it, then it flashes red and black pixelation, then goes into the Startup Repair. After the execution, he said, "Startup repair tried several times but still not determine the cause of the problem." I ran to the recovery of the system several times, and whenever it says it succeeded, but windows still does not work and I start this process again. Please help me with this situation; I need your advice.
because of the problem of the color, looks like you can have either a corrupt graphics driver, or for the lack of graphics hardware
If, in accordance with manufacturer's warranty contact
If it is under warranty, contact your local reputable computer repair workshop
and as you say you have also problems of retrieval system, which is probably related to this problem of graphics contact your computer rmanufacturer
It's their recovery process not microsofts
Firefox does not (Cup) of the lower edge and the right edge of the graph. IE10 does not work.
Office Windows 7 2009 service pack 1 Firefox 26 Internet Explorer 10
Flash player version 11.9.900.170 plugin 11.9.900.170 activex version used by Firefox
Problem began late November when Miniclip.com forced updated flash player to version above
-C' was when they started to play a video advertising in the game box before you could start.
Have screen shots of IE10 and Firefox26 side-by-side clearly showing the problem - how these can be downloaded for see you? E-mail? Web site? This place seems to be text only?
In the meanwhile the grandchildren and self have learned to use IE10 instead of Firefox that we prefer.
Their House of Windows XP has same Flash Player in Firefox and it works fine.
Downloaded two screenshots on Media Gallery.
You can not attach a screenshot in the first row who starts a thread, but you can do it in subsequent responses.
Try disabling hardware acceleration in Firefox (you will need to close and restart Firefox).
- Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
Reset the zoom of page on pages that are causing problems.
- View > Zoom > reset (Ctrl + 0 (zero); 0 + Command on Mac)
When I select emails I want to remove the delete button and all the other buttons in the same row do not work. This not only with hotmail, it seems to be with other applications, including on this page at the top where you have "Home, office, int explore" etc... It happens to be in this part of the page, which can make? I ran anti mailware, anti-spyware and Windows Security Essentials found nothing and they all date please helporiginal title: send probs
Hi cooljae,The question you have posted is related to Windows Live hotmail and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the best support.
Export as Adobe PDF does not open automatically, and the downs of drop on all my options do not work... Help, please
I need to be able to easily convert PDF into word documents, which is why I got it, but in the acrobat reader software recent update/upgrade the export to PDF option doesn' automatically open, nor the dropdowns work to "create a pdf" "change pdf" etc.
Make sure that you have installed the last DC of Adobe Acrobat Reader Acrobat Reader DC Learn & Support to use the pdf Export service help Acrobat Reader | Export PDF to Acrobat Reader DC.
You can also use this service online at https://cloud.acrobat.com/exportpdf
Maybe you are looking for
Hello I wish that all the Hi Hat identical beats in 'drummer', I know I can do 'drummer' a midi track then change the velocity of the hats, but I can do the drummer? all advice appreciated.
Hello! I am trying to use a vertical scroll bar to represent my dataset of 72 hours. I also added two additional cursors, to represent an interval of time inside the dataset object. My problem is that when I try to connect the cluster with timestamps
Hello I have problem with wi - fi on my Lenovo T430s. Wi - fi only does not show, there is only the bluetooth radio. I not found any solution to this. Restart or new drivers does not work. The only solution is to send it to the service? Thx for the a
After you have installed the latest firmware of laser jet color of HP, I got error 79 and turn on and off my color laserjet 2605dn all the time I followed the instructions and tried to fix this error 79. Help, please.
original title: dvd When I play a dvd I have no sound the picture