Have a PHotosmart C4795 wireless capable; printing problems

I have a Verizon 4 G hotspot for the Internet and was able to print for a while, but now can't do wireless wireless. No problem to do with usb to the printer.

Print a network Test Wireless in the network menu on the front panel.  That said, is it connected to your hotspot?

Tags: HP Printers

Similar Questions

  • Need help with Photosmart C4795 Wireless Connection

    What I have: HP Photosmart C4795

    What I use: Macbook OSX 10.9.5, wireless network with WEP security, running, I'm not sure if I have WPS or not (don't know how to say or use it)

    Problem: I used it as a wireless printer without problem for the past five years.  Recently, I moved and cannot find out how to configure the wireless connection.  USB connection works fine.  I still have the installation software, and as far as I can tell, it is updated (I'm not positive however.)  When I run the HP Installation Wizard, I've got to the point where I select "Set up for wireless" and the HP installation wizard crashes every time.  I scoured the forums and have found conflicting advice about this problem.  Someone please give me a clear answer. is there something I can do to get the job of wireless or no wireless capability is no longer works with Mac OS x 10.8 or superior?

    Ah ha! I thought about it.  For anyone who uses an ATT Uverse router, maybe that's your problem.  My router is a NVG589 of Arris.  I don't know about other routers, but I guess that's the same thing.  These routers are capable of WPS, but their default settings have the WPS is off.

    You have to

    1 access to the properties of your router via a web browser (Safari, Internet Exploere, Firefox, Google Chrome, etc.) to the address http://192.168.1.254/mdc
    "2 click on 'Edit your settings or wireless security'", you will need the code printed at the bottom of your router.
    3. turn on the 'Wireless Protected Setup (WPS)'

    From there, you should be able to follow the Setup instructions for printers WPS enabled found here: http://support.hp.com/us-en/document/c02273853

    This next set of instructions is specifically for anyone who has a Mac and running the version OS x 10.9 or higher.  (If you don't know how to check this, click on the apple icon in the upper left corner of your screen.  Select "About this Mac" a box will appear with the information of OS x).

    Select Mac OS X.

    Select the third option OSX v10.10 Yosemite, Mavericks Xv10.9 OS and OS X v10.9 Mountain Lion.

    Select Option 1: Wireless Installation (EVEN IF YOU ALREADY HAVE IT CONNECTED VIA USB.)

    Skip the second step and proceed directly to step three.

    Select the second method: install the software using Apple software updates

    Follow the instructions for the method of the push button.

    I hope this helps for those who had as many problems as me!

  • Photosmart 5510 - wireless Mac - printer offline

    Hi there, I am trying to print from a Mac again photosmart 5510, wireless is connected, tested printing via an ipad - runs like a dream.  Unable to print message error "printer is off-line" laptop (Mac 10.7.2), the printer is not connected.  Printed with a cable but I can't via wifi. Have checked all troubleshooting tips, no luck.  advice is appreciated

    Download and install this: http://support.apple.com/kb/DL907

    Reset the printing system:

    -Go to System Preferences > print & Scan
    -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - This will remove ALL your printers!
    -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  • HP Photosmart C4795: remove the printer to computer

    I have a HP Photosmart C4795 who stopped working so I bought another one same model c4795 and my question is that I have to remove the old printer to my computer before I plug in the new? Also I don't have a cd for the new so I can use the old cd? Thanks for any help.

    Hello

    As it is the same model, just go to devices and printers, the existing printer right click and select remove device.

    Onece the device removed, click Start > programs > HP > your printer model and select Add a device.

    Follow the steps on the screen by selecting the link required to set up the new printer.

    Please let me know any questions,

    Shlomi

  • Photosmart HP 6510 while printing problem a B211a printer

    I have HP photosmart 6510 while 1printer-B211a.

    It goes through all the movements of printing or copying, but the page is empty. That's what I tried to do to fix this problem: I installed the new black cartridge on printer according to the instructions, I removed and reinstalled x 2 and the page is still empty.

    Thanks for your help

    Nice day!

    Depending on which Windows operating system you are in, there are different steps to choose.  Most likely, you need to reset your printer.

    Follow the steps listed in this document to reset your printer and see if that helps.  Let me know if this step or an other steps do not work.

    Printing blank Pages

  • I have a photosmart c309a & ceased to print correctly

    I have a photosmart C309a and a Mac computer.  I have an OS x 10.5.8 when I try to print something from my email, I can not get the printer to work.

    I don't get the error messages.   The printer will start printing but displays only 4 words at the top of the page.   These words are from:, subject:, Date:, and Tme:.  The rest of the page is blank. The area beneath the orientation box said: Mail.

    I can get it to print only if there is an enclosure that I can open as a coupon. & then the area beneath the box orientation said Safari.

    I tried to print the printer status reports, but all I get are boxes with no words in them. The colors will print well.

    All I get are the colored lines & boxes.

    We will restore the print system:

    -Go to System Preferences > Print & Fax
    -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - This will remove ALL your printers!
    -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  • HP PRO 200 MFP 276NW WIRELESS DIRECT PRINTING PROBLEM

    I JUST BOUGHT AN HP LASERJET PRO 200 276NW COLOR MFP PRINTER AND I DISCOVERED THAT I CAN'T PRINT DIRECTLY FROM MY LAPTOP. MY LAPTOP HAS A WIRELESS FUNCTION. HOWEVER I WAS ABLE TO PRINT FROM MY PHONE OF ZR SONY XPERIA. I TRIED TO REINSTALL ON MY LAPTOP SEVERAL TIMES BUT WITHOUT SUCCESS. HE ALWAYS SHOWS QUESTION SYMBOL ON PART OF TNE COMPUTER WI - FI.

    SECOND, THE PRINTER USUALLY MAKE NOISE WHEN PRINTING. IS THIS NORMAL?

    FINALLY. IS THERE ANY HP DESIGNATED SOFTWARE FOR PHONES TO WIRELESS CONNECTION WITH HP RINTERS TO RUN NORMAL PRINT JOBS?

    ACTUALLY, I BOUGHT THIS PRINTER DUE TO THE WIRELESS FUNCTION. USE THE WINDOWS OPERATING SYSTEM 7.

    I NEED HELP URGENT

    Thank you

    Thank you very much. I got on the question and my printer works perfectly. Your comment encouraged me to go further by performing for the solution sites from the center of the HP wireless printer and finally I found the solution. For the benefit of third parties. I uninstalled the software from my computer and started again.  I then followed the procedure listed in the HP Center /HP wireless wireless direct print page.

    Thank you

    OLAAT

  • Photosmart C4795 wireless problem

    Hi, I tried to configure connect wirelessly with my mac (OS 10.5.8) but I can't seem to access it.  When I search the online ip address I can pull up all the information from the printer, but when you try to add the preferences--> printers/fax system there is no recognized printers available.  When trying to set up by the disk, that I am unable to connect wirelessly via usb - all I get is an error saying that my mac has no access on the network even if it does.  The printer wireless network test report, there is no problem found.

    I can add the printer directly by the option ip address when adding new printers through the system preferences, but the only thing that printed successfully is through the hp utility test page - whenever I try to print other documents it stalls and loses the connection to the printer.  I don't know if I added it by intellectual property through system pref properly because of this.  Everything works fine from my pc.  Thanks for any help you can provide.

    If it prints very well from your PC, then I will assume that it is connected to your network OK.  We'll take on the Mac:

    First thing to try would be to reset the printing system:

    -Sys Prefs, Print & Fax
    -Right (control) click inside the box that lists your printers and select Reset Printing System.
    WARNING - This will remove ALL your printers!
    -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

    If she is not there, restart your router and look again.

    Also, tell me about your network - router brand/model, type of encryption (WEP, WPA, etc.) and ISP type (DSL, cable, etc.).

  • Photosmart HP 6520 Internet printing problems

    I have a printer HP Photosmart 6520, that I just installed, and I use Windows 7 Home Premium (64-bit).  The printer is plugged into electricity - IE not used wireless.  I can print a document in "Word", but not Internet.  There has not been any error messages. Don't just print.

    Any ideas please?

    I now have Google Chrome installed and I am able to print the PDF using this.  Thanks a lot for your help.

    I understand that HP could well have assumed that no one prints emails or articles on the internet these days and have set this printer as a result.  However there must be a lot of users, like me and other users of the forum, who are in need of this facility.  As more people buy this printer, I'm sure there will be more people having a problem with this.  It would be useful that HP has released an update.

  • Photosmart C309g with MacBook printing problem

    My MacBook using mac OS 10.5.8 and I am trying to print with an HP Photosmart C309g-m. I have been through the help files and tried all the solutions listed without result. The printer thinks it is connected and saying he is the print job, but he does. Finally, the printer cancels the job. Meanwhile in the print queue, my computer is still sending data. I downloaded the driver this morning, which is current. I use a USB connection not wireless.

    Any help appreciated. Thank you.

    We will restore the print system:

    -Go to System Preferences > Print & Fax
    -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - This will remove ALL your printers!
    -Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  • Please help with Photosmart C4795 Wireless

    Hi, I have tried everything and can't seem to get this printer works wirelessly. I followed the instructions step by step, at least 4 times. The blue (wireless) light on the printer is on, the printer is recognized by my router (wireles Belkin n +), my software (McAffee) has also recognized the printer. When I do the installation of the printer, everything happening. I am able to print the report of wireless network and everything goes as well as it lists the good SSID and information.

    I use Windows 7 Home Premium. When I try to print the printer icon appears (it clearly says "printing") and after 1 minute it just tells me "error-printing".

    Solution Center HP also tells me that the printer is connected and active without error... Please if you have an idea on what could be the problem, I'd be happy.

    Try this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  • Wireless PC/printer problem

    PC is not communicating with the wireless printer.  Tried to install the printing without result software.  Printer and PC receive the signal from the router.  Participation is.

    Thanks for your reply and your help.  Fortunately, I was able to fix the problem before I received this information.  The software preloaded Wi - Fi was never properly configured.  Once I found this, the fix was easy and the system works as expected.

    Aydiaman

  • HP Photosmart C4795 of only printing blank pages - including the test page.

    I have a Macbook Pro IOS 10.7.5.

    WARNING - I have had this printer for about 2 years and it is literally never worked for me. I finally gave up and its been sitting in a closet. I really need to be able to print at home again this is why I'm asking now.

    I have tried all troubleshooting ideas given to me by the HP site and nothing works.

    The printer behaves like its printing but springs from the white pages, including the test page. I connect via a USB port, so I'll make sure that I had a strong connection. I have new black and color ink cartridges.

    Help, please!

    I would check the printer without connecting to a computer first.
    Do not copy work? If copy does not ink on paper, you can be dead cartridges or blocked. There is an option in the menu Tools 'cleaning print head', if that is not printed a page, the cartridges don't work.

  • HP Office Jet 6000 wireless duplex printing problem

    (Note: all printers updates have been made)

    Printer works great as duplex, however:

    I try to Print Duplex (1/2 letter size pages - portrait booklet with the paper size of 8.5 "x 5.5" ).

    When I go to print I select the paper size for brochure (predefined size as shown above), however deselects the duplex option and manual is the only option.

    If I reselect Duplex then the size of the paper goes back to 8 1/2 "x 11".

    It's normal for duplex printing on non-standard paper?

    I know I can do it manually by printing one side at the time, but it defeats the purpose.

    Thanks in advance for any answers/ideas.

    blperry2001, I responded earlier to a similar post here (http://goo.gl/tcbiM) to explain why some paper sizes are not able to print.

    A list of most of the formats accepted for our printers can be found here (http://goo.gl/Bwv10), although according to their use some sizes may not be supported.

    I hope this helps!

  • I have a photosmart b210 which began printing all my black in gray, the color is very well

    My photosmart started printing any black ink in gray scale. the color is fine, but it's boring. I did matenence, such as cleaning the printheads, printer status report, report print quality (and that was even printed in dark gray)... what should I do?

    OK, let me clarify:

    • Black ink is not used when printing on Photo paper, because it is pigmented and not compatible with shiny media.
    • The most likely issue is having the vents blocked as described in the link I gave you a link.  My post in the link "soak the printhead" told to check first the items displayed in the link, that includes details of the ink level checking and vents are clear.
    • Another likely possibility is the use of third party inks.  Using HP replacement ink ink or a third party?
    • If you do not want to follow the suggestions here then Contact HP for warranty repair.  If you use third party, that repairs are not likely to be covered, ink HP accepts no liability for the quality of third party products.

Maybe you are looking for

  • Previous uploaded photos disappeared when I downloaded more photos.

    I had downloaded photos to my iPad to my PC using iTunes when I got my iPad Mini.  I downloaded some pictures yesterday and the previous photos, I had downloaded are now gone. How can I download more pictures without losing the photos that I've saved

  • Omen: The omen application control has disappeared

    A couple of days ago all of a sudden my keyboard did not meet the user profile settings I changed through the application of control the central operations of omen omen. Today, after looking for some reviews online, I decided to update, thanks to HP

  • -2147467259 database

    I use SQL server (x 86), XP SP3, LV2011 and its 32 bit also using UDL to connect to the database file. When you manually configure the UDL file, so I am able to access database also test the connection succedded. When I use the UDL file in my applica

  • When I defragment my system it only only only 17%

    WHEN I DEFRAGMENT MY SYSTEM IT ONLY 17% THEN STOPS HOW CAN I SOLVE THIS PROBLEM. THE OPERATING SYSTEM IS WINDOWS XP 2000

  • Why can I not use a DVR, dynamically called VI

    Hi all I created the two screws. Next place in the same folder and open testDVR.vi. Run it with bCallMode = false once and once = true and see what happens... Why can I access and use the DVR when using the call by reference node and not when you use