Have a prob error DXG1. DLL continues to show

Similar Questions

• I have a prob with d3drm.dll

  a window appears sying "prog requires d3drm.dll which is no longer included in this version of windows" (vista ultimate). Ive tried to download said file but get then stopped in my tracks by an another prob, saying: "this file has no program associated with it for performing this action. Create an association in the Association contrl Panel set"How do the __ I do that I am only a layman. HELP, SAM

  It seems to me that you try to install a program that is not compatible with Vista.  What program is (and which version)?  You can check for the compatibility of the Vista Compatibility Center program at the: http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx.  You cannot create an association to a .dll file - this is an error message saying basically that you can not use the copied file to do what you wanted to do (because it is not included in Vista while it was probably included with the other previous operating systems of Windows).  It is an obsolete file and if this is required for the program to run then you probably will not be able to run this program under Vista.

  You can try running it in compatibility http://www.howtogeek.com/howto/windows-vista/using-windows-vista-compatibility-mode/ mode but I don't think it will work if the file is not located anywhere in the system (as seems to be the case), and the file is required to run the program.

  Sorry for the bad news, but see the program in the Compatibility Center and if it is compatible then we should be able to find a way to make it work despite this file problem.  If it's not compatible, then you have your answer.  Is it is not listed, then it is unknown, but maybe if it's probably not compatible.

  Good luck and I hope this has helped. Lorien - a - MCSE/MCSA/network + / A +.

• Cannot download and install the latest update in Design CS5.  Error code: U43M1D207 continues to show

  Have two copies in the CS5 Design for use on two different computers.  Now updating these copies.  Low load process seems to work but ends with a notice that "there was an error downloading this update.  Quit and try again later.  Error code: U43M1D207.  Any help would be appreciated.

  Error 201 & 205 & 206 & 207 or several U43 errors

  -https://helpx.adobe.com/creative-cloud/kb/download-update-errors.html

  or

  At some point in the past (I don't know the exact date) Adobe "merged" the original update manager in cloud Update Manager, which means that you no longer use your original update manager

  The latetest (cloud) update sometimes does not work with old programs... Try to install your updates manually

  Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/

• I have registry problems. My games drive no longer works: he continues to show that there is a problem with fmod.dll

  I have registry problems. My games drive no longer works: he continues to show that there is a problem with fmod.dll, then when I fixed an error occurred -FSOUND-Sample_Load@16.  Also, ITunes says that there is a registry problem. We have inadvertantly deleted something or can other software recently installed it cause it was working fine until we installed a vivtar camera.

  Can provide you advice on how I can overcome this problem.

  Concerning

  original title: update windows

  Hello

  Method 1:

  I suggest you uninstall all third-party software and then try to perform the system restore.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Method 2:

  I also suggest to perform a system analysis File Checker.

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Post back with the results for further directions.

• I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base.

  I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base. Have Adobe reader X (10.0.1) who refuses to be carried away. Other than a drive X (10.1.0) has been reinstalled. Also have Acrobat reader 5.0 is installed from a CD of the Canon scanner slide. The error remains. If anyone can help. Leif Stg

  Hi Leif,

  Where do you get this error message?

  I suggest you to follow the steps and check if it helps.

  Method 1: Uninstall all the instance of Adobe reader and Acrobat reader and install the latest version of one of the drive and check if it helps.

  http://get.Adobe.com/reader/?promoid=DINRS

  Method 2: If the problem persists, perform a system restore and check if that helps.

  How to restore Windows XP to a previous state

• I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  HI lifeimagecreations

  Greetings!

  Please see this thread in the lightroom preferences entry CC2015 crashes with LoadLibrary failed with error 1114

  If this does not work, reinstall the program with administrative rights.

  Let us know if this helps

  Concerning

  ~ Assani

• I have a new macbook pro and want to install CS3 on it. I followed all the download links. Found my serial number for my Adobe account and get up to date through the whole & get this message ' put in place has encountered an error and cannot continue,

  I have a new macbook pro and want to install CS3 on it. I followed all the download links. Found my serial number for my Adobe account and get up to date through the whole & get this message ' put in place has encountered an error and cannot continue, contact adobe customer support for assistance ' all I want is for CS3 to install on my new computer so I can continue to work and do not have to spend hours working it help Please. CC is not an option, because I work in a country with no reliable unlimited internet access

  New computer means new problems of system operating with the OLD software means

  Fix possible Mac 10.10.4 (at least for Premiere Pro) https://forums.adobe.com/thread/1891705

  10.10 mac. ? sometimes has problems, often related to the 'default' permissions that need to be changed

  -solution https://forums.adobe.com/thread/1689788 of a person

• try to get on the internet with my new dongle a message continues to say that I have security certificate errors

  Dongle doesn't work, get errors certificate on the screen

  Hi I have a pc, and when I try to get on the internet with my new dongle, a message repeat myself that I have security certificate errors, so I can't get on the net to fix and I don't know how to resolve this, the pc was origanally used for a modem by my sister. Does anyone know how to solve this problem.

  Hello

  1. What is the brand and model of the dongle?

  2. have you installed the drivers from the dongle?

  If this is not the case, the same install from the manufacturer's Web site.

  I suggest you to contact or visit the site of the factory to install drivers and check if that helps.

  I hope this helps.

• I have error msikhd32.dll file not found on startup, how to solve this problem?

  msikhd32.dll

  There was a problem starting msikdh32.dll

  The specified could not be found.

  Hi Vipul,

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  From your problem description, I understand that you receive error msikhd32.dll file not found when starting.

  To better understand the issue, answer the following questions.

  You did changes to the computer before the show?

  You can perform the methods suggested below and check if they will help you solve the problem.

  Method 1: Perform the clean boot, check if you receive the message.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2: perform the complete analysis of a computer by using the Microsoft Safety Scanner: http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If the problem persists, or if you want more help respond us. We are happy to help you.

• How can I fix error d3d9.dll

  How can I fix the error d3d9.dll

  Hi Antony,

  1. when exactly did you D3D9. DLL error?

  2 have had any changes made to the computer before the show?

  3. what version of Windows is installed on your computer?

  D3d9.dll problems result in one way or another by a problem with Microsoft DirectX.

  The file d3d9.dll and d3d10_1.dll is one of many files in the DirectX software collection. Because DirectX is used by most Windows-based games and graphics programs advancements, d3d9.dll errors usually only appear when you use these programs.

  Important note: Do not download the file d3d9.dll individually any "DLL download site."

  Note: If you have already downloaded the d3d9.dll in these places to download DLL, remove it from everywhere where put you it and continue with the following steps.

  Step 1:

  Restart your computer if you have not yet.

  D3d9.dll error may be a stroke of luck and a simple restart could clear up completely.

  Note: the latest version of DirectX should be installed no matter if you are on Windows 7, Windows Vista or Windows XP. Installation can include DirectX9 and DirectX10 files but they run side-by-side without problem on all these operating systems.

  Step 2:

  Install the update from the link below and check if the problem is resolved.

  End-user Runtime Web install DirectX
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=2da43d38-DB71-4C1B-bc6a-9b6652cd92a3&displaylang=en

  Step 3:

  I recommend you perform the clean boot.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Step 4:

  System File Checker Scan SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

• Explorer.exe error, Normaliz.dll is missing

  When I try to start my computer, I get the above error. I get the same when starting in safe mode. The only thing that works is the Task Manager. No desktop icon just a white screen. Where should I start

  In Task Manager, you can click file, hold down the CTRL key, and click New task and that opens a command prompt (or the boot safe mode with command prompt).

  If you have your copy of normaliz.dll on a USB key which is the D drive (for example), and XP is installed on your C drive, you can then type in something like this:

  Copy d:\normaliz.dll c:\windows\system32

  When the copying is completed successfully, you will see a message like:

  1 file (s) copied

  You can always do since if Task Manager:

  If you see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  It is in the case Log:

  Event type: Information
  Event source: Application Popup
  Event category: no
  Event ID: 26
  Description:

  Application popup: Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  Start explorer.exe, but the normaliz.dll file.  If explorer.exe is not able to run, you will not be able to do much with your system until the replacement of normaliz.dll.

  You can click OK for errors and finished up in the Task Manager where you can try to fix it.  The message can keep popping up from time to time, while you're fixing it, so just click OK to close the message.

  If normaliz.dll is missing, you can copy it from a working system to the system afflicted with the same version of XP and Internet Explorer.

  You will get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.

  The normaliz.dll file must be located in the c:\windows\system32 folder and therefore is not a Windows file protected, making the Microsoft Support Engineer 'experts' suggest running sfc/scannow, which is just another one of their prosecution of wild goose that will not work, he'll never work and it will only waste your time (and they don't tell you how to run either - if explorer.exe does not start).

  Then engaged Microsoft Support Engineer 'experts' will offer to you develop a copy of the file from the XP installation CD you probably haven't, but it is also not on your XP installation CD, and you will have the same problem try their suggestions to 'try' to start in any any Mode without failure, so this will not help you.  These "experts" seem to think that the Safe Mode boot or boot will replace magically missing files, but it doesn't.

  You also will be able to properly run a browser on the system afflicted to go on Internet download one.

  There is a large computer security risk in the normaliz.dll from some website download.  The best idea is to get a copy of normaliz.dll from another computer that has the same version of XP and IE and replace it from a USB device (which you can access from the Manager tasks), or using a system that works, you can download one of my SkyDrive.

  You can still use the Task Manager to run the system restore and bring it back, but I've never tried and never use SR in all cases.

  If you have recently done a bunch of Microsoft updates, you may have also gotten IE8 so maybe that something was wrong here although the normaliz.dll is the same for each version.

  When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM, you can click file, new task, Browse and edit the menu drop-down "Files of type" to all files that you can see all the files in folders.

  Go to c:\windows\system32 to see if normaliz.dll is really missing. If the error appears again while browsing, just click OK to get past it.  The explorer.exe tries to run and cannot until the missing file is replaced.

  If it's the only thing missing, you can get one from a working system of the same type as yours, copy on a Flash DRIVE or a floppy disk and always using TM, to browse, copy and paste it where it should be or you can download one of my SkyDrive.

  TM, you can still access your thumb or any other medium the same disk by navigating, copy, paste, etc very well all work.  You use TM to navigate to your thumb or floppy disk, copy the normaliz.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.

  If things get worse, just return to TM and remove the file back where you were in first place and continue troubleshooting.

  Using a system that works, you can also download a copy of the file from my SkyDrive and put it on a floppy or USB thumbdrive and networks diskettes for the distressed system.  Sandalenet means wear you the system afflicted by hand.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called normaliz when the name of the file should really be called normaliz.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

• error message "Error in Script" line 30, tank: 3, error: error loading DLL, Code: 0, URL: file.

  whenever I boot, I get the following line to the 'Script error' 30, tank: 3, error: error loading DLL, Code: 0, URL: file...

  Question - what should I do to solve this problem.

  Secondly - I installed a new program that came with a new camera.  I have loaded the software but when I try to open it states the following:
  "The program cannot start because MSVCP71.dll absent from your computer."  Try reinstalling the program to fix the problem.

  I reloaded the program several times and this message continues to invent whenever I try to run the software.

  I believe that these two issues are related.

  I would appreciate help.

  Thank you

  Charlie

  Hi Charlie,

  one) you get error script on Internet explorer?

  (b) what is the brand and model of the camera?

  (c) what is the name of the camera program?

  (d) were there any changes on the computer before the show?

  Follow these methods and check if that helps:

  Method 1: You can get the script error if there is a problem with the JavaScript or VBScript code on the Web site you are looking at. Sometimes a script error can be caused by an error during the download of a Web page, but more often it is an error in the Web page itself.

  I suggest you to follow the steps in troubleshooting this article and check if it helps:

  How to troubleshoot script errors in Internet Explorer

  http://support.Microsoft.com/kb/308260/en-us

  Also refer to this article: http://windows.microsoft.com/en-in/windows7/what-should-you-do-about-internet-explorer-script-errors

  Method 2: Msvcp71.dll is a Microsoft C, C ++ Runtime library, and it is necessary for the performance of several Microsoft and non-Microsoft applications on a Windows System. It is quite possible that there is something wrong with the installation of the camera program files.

  Step 1: The MSVCR71.dll Version comes from Microsoft Visual C++ .NET 2003 with Microsoft .NET Framework 1.1.

  http://support.Microsoft.com/kb/326922

  Try download and install the latest Microsoft Visual C++ 2010 redistributable package of this link and check.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5555

  Step 2: If the error disappear not even once you have reinstalled the application causing the error, then download the DLL from the Internet or copy it from another computer with the same configuration as yours in the directory of the program, which requires that the file.

  Note: you can also copy the file to the C:\Windows\System32\

  After you have copied the file try to open the device program and check.

  Hope this helps, if you need help on Windows let us know we will be happy to help you.

• error atiu9p64.dll

  A disk at system startup error (HP ENVY H8 series).  System came after the auto correction.   now get error 0 X 0000020 for atiu9p64 when tring to run HP Quick Start on system 8.1.  When I look at C:\windows\system32\atiu9p64.dll it has a size in bytes of 0.   Y at - it anyway to install atiu9p64.dll without having to do a full restore of the original system.

  Hello

  You have an ATI corrupted. DLL file.

  Run the Microsoft System File Checker.

  Perform a Microsoft System Restore:

  To use the system (Windows XP, Vista, 7, and 8) restore:

  1. Click the Start button.
  2. In the search box, type "System Restore" and press ENTER.
  3. In the results, click on System Restore.
  4. Enter the administrator password (if prompted).
  5. Follow the steps in the Wizard to select a restore point.
  6. Restore your computer

  Reinstall the ATI or AMD graphics software that is available on your PC software and driver download site. Please check your product number and after if you have doubts on how to navigate to your PC HP support site.

  Jaco

• Dell Inspiron with Windows 7, error d3dx9_33.dll trying to play Civ 4

  I'm looking for a way to get my civ 4 game to work on my new computer is a dell inspiron 546 s with windows 7 is there a way to do this easily

  * original title - I just buying a dell insperon he has windows 7 on it and the desire to play my civ 4 game on it but get error d3dx9_33.dll is missing or not found tried reinstaalling, as he suggested same problem guard passes. *

  Have you tried the forum of civilization? Also look into compatibility mode.

  Compatibility mode - make sure to run older programs in this version of Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Learn how to use the Mode of Windows 7 compatibility with legacy applications
  http://Lifehacker.com/5466628/learn-to-use-Windows-7s-compatibility-mode-with-older-apps

  Using Windows 7 or Vista Compatibility Mode
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  Also: http://www.sevenforums.com/tutorials/1196-internet-explorer-compatibility-view-turn-off.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Update of security doesn't have a 646 error code

  I have 6 security updates which are continually do not install.  Have followed the instructions on this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/c7a39a5e-AB12-4b20-a328-cbac9a998e6d

  Therefore created the register.bat file, but this did not help.

  Please tell me how to solve this problem, below are updates that fail and I get the error code 646, but there is no information no obvious how to solve this problem:

  KB2289158

  KB2284697

  KB2483110

  KB2412171

  KB2288931

  KB2288953

  Read the problems known in this page, they explain what to do. There is a link to a fix the article.

  http://support.Microsoft.com/kb/2258121>