have files on a drive that have been defined as private and the need to open. Disc got a blue screen
On my laptop, I had a logon administrator who has been in private. The computer has a blue screen. I ran the XP CD repair disk and that took care of the blue screen, but it would not go as far as allowing me to re-authenicate the license on XP. It froze just straight up. I took chase him and attempted to transfer the files to another drive, and authorities wouldn't allow it. Need either re authenticate the reader to allow access, or find a way to UN-encrypt files and transfer them.
Hello
- What is the error you receive on the license?
- You are able to start Windows after the installation of repair?
If you are able to start, you can check out these methods:
a.Open workstation
b. double-click the drive where Windows is installed (usually drive (C :), unless you have more than one drive on your computer).)
If the contents of the drive is hidden, under system management, click Show the contents of this drive.
c. double-click the Documents and Settings folder.
d. double-click your user folder.
e.Right - click on any folder of your user profile, and then click Properties.
f.On sharing tab, deselect make this folder private so that only I have access to it check box.
Tags: Windows
Similar Questions
-
My .jpg EVERYTHING suddenly have been converted from .pdf and I can't open them
Windows 8.1 using, when I went to see a few jpg earlier today, I found that they show now than 'Adobe Acrobat Documents.' When I try to open one, I get the error message that they are jpg and Adobe cannot open a jpg file. ???
Easy enough to fix. You need to change your file system for all associations that that schedule you used in the past to open the .jpg files.
Here's how---> choose the applications Windows uses by default - Windows help
-
I am unable to share files between 2 computers 32-bit and 64-bit windows 8. Please tell me a solution.
The number of bits of the processor is not influence it. If you are having problems sharing files, the bit of the processor is just a coincidence.
What is the error you get when you try to share a file? And what method do you use to share? Homegroup? Right-click to stock option? Or something else?
-
I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.
I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.
Uhm... I think the issue here is a misunderstanding of what you watch.
If you want to access your files from the old hard drive - you need to look in the right place. If the old system was "Windows 7", "Documents and Settings" is the * wrong * place to look and "Users" would be the place to go.
You * will * take ownership and change permissions on ALL (you want to propagate to all subfolders/files when do - to save time) in order to get them properly.
New-->: Windows Vista/7 would have your files located in the directory 'Users' of the root of the drive - and then under your username.
- \USERS\
\Desktop\ - \USERS\
\Downloads\ - \USERS\
\Favorites\ - \USERS\
\Documents\ - \USERS\
\Music\ - \USERS\
\Pictures\ - \USERS\
\Videos\
... etc...
Documents and settings to WIndows Vista/Windows 7 is a symbolic link and would lead to what you see if you tried to use it.
- \USERS\
-
Original title: WPS
They gave me a new laptop for Christmas, to transfer my files, some have been modified to WPS and now I can not open them. I am moderately OK on the computer and told to convert the files to something else... OK? What? How? If you can help please, I'd appreciate it. They are important files for me. Thank you.
Hello
. WPS files can be opened with Microsoft Works, Microsoft Word, Word Viewer, or can be converted
other formats.. WPS file extension
http://www.FileInfo.com/extension/WPSHow to open a WPS file
http://www.online-tech-tips.com/MS-Office-Tips/open-wps-file/Microsoft Word Viewer
http://www.Microsoft.com/download/en/details.aspx?ID=4ZamZar - free - convert wps (Microsoft Works) files to doc, odt, txt, and pdf
http://blog.Zamzar.com/2007/04/23/convert-WPS-Microsoft-Works-files-to-doc-ODT-txt-and-PDF/I hope this helps and happy holidays!
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I have 9, 1 pages in PDF files that are accessible and the need to combine them into 1 PDF file. I tried adding, adding and the combine process of PDF files. The file created does not take my changes. The file created is partially accessible, but I have to re - the problems that I had fixed in the unique files. I need suggestions on what else can be done, if any. Using Acrobat pro XI.
By habit, I tend to combine PDF files in the Page pane by right-clicking thumbnails then 'Insert of Pages'-> 'From File'. For me, this preserves the tags of these two documents, although the tags may have to be moved to the correct location (if I remember correctly the tags for inserted pages are put at the end of the tag structure, regardless of where the pages are inserted), if I put the tags in the document to insert into a container as a Section tag It makes the process easier. Travel set of tags in the right place is the only re-fixing that I remember having to do. What behavior you encounter?
a 'C' student
-
When I opened outlook express Inbox, all messages have been deleted, please help restore the same
Go to view | Current view | Show all messages to make sure that you have just selected 'Hide read messages.
If this does not help, check your Recycle Bin, the bak files which are dbx files, you can restore backups. See www.oehelp.com/OETips.aspx#2
If this does not help, then you will probably need my program DBXpress (www.oehelp.com/DBXpress/), which will extract the messages from individual dbx files, and if messages are no longer in the files, it can extract from the disc itself.
Steve
-
How to exclude the missing files or library locations that are on a network backup and restore of Windows 7 Professional drive. To give you more information, I have photos stored on a network drive to the following address: Wirelessspace\LaCie\MyPhotoGallery\Family. This folder is a location of library under the images. Because this folder is on a network drive backup backup not file Wizard.
In addition, the following file locations is not found because they no longer exist. So why the backup wizard continues to look for and how to remove the backup set? I guess the error code following each line means simply that records cannot be found. Is this correct?
Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Searches\Google file. Error: (the system cannot find the specified file. (0 x 80070002))
Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\SyncUP file. Error: (the system cannot find the specified file. (0 x 80070002))
Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Podcasts file. Error: (the system cannot find the specified file. (0 x 80070002))Hello
I suggest you to follow the steps in the article below and check if it helps.
Error code 0 x 80070002 when you back up files in Windows 7: http://support.microsoft.com/kb/979281
Hope this information is useful.
-
I have a Sony Vaio computer and the hard drive begins to crash.
Original title: Vaio computer
I have a Sony Vaio computer and the hard drive begins to crash. Microsoft now sells Vaio? Where can I buy?
Here are the computers that Microsoft sells: http://www.microsoftstore.com/store/msusa/en_US/cat/All-PCs-tablets/categoryID.69404700?icid=en_US_Store_UH_devices_Pctab
-
I have windows vist home Edition and I can't open files .scn, where can I get the program software to install, hopefully free.
Thank you for your time and help
KVL
I have windows vist home Edition and I can't open files .scn, where can I get the program software to install, hopefully free.
Thank you for your time and help
KVL
On .scn files:
file .scn extension:
http://www.FileInfo.com/extension/SCN
Program (s) that open. SCN files
WindowsMicrosoft Age of Mythology Info Microsoft Age of Mythology: the Titans Expansion Info Microsoft Age of Empires Info CPNBUILD Info
-
Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?
Hello
Detect and automatically fix problems of CD/DVD
http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=56A1F87CD8895B0EE040AE0AB7E15FFCPlease make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.Hope these helps.
Rob - bicycle - Mark Twain said it is good.
-
I have downloaded Microsoft Windows Malicious Software Removal Tool (KB890830) - to install the CAB file switch and it detects 2 problems during analysis, but in the end that he said found no problem and the only option I have is to click Finish. I tried several times with the same result of detection 2 never, he gets rid of them. Help?
OT: Malware
On Saturday, April 5, 2014 22:59:18 + 0000, JChabler wrote:
Where? I find only free trials to detect, but you have to pay to resolve.
Go to https://www.malwarebytes.org/ and lower-left button
corner, one that says "Free download." -
I have version 6 Creative Suite Design Standard disc. When I tried to install the software on my new laptop, several components have been installed, but Acrobat and Illustrator were not. The system returned the following message: "Adobe genuine software check failed." The product you want to install is not genuine software remains, and seems to be counterfeit. Please report a piracy or contact customer support for assistance. This is the drive I bought from Adobe and running on my old laptop. I have the right product and serial numbers, which allowed me to install several other components of the software.
Warning: "Adobe software real failure of Validation...". » | Windows
-
I have ownd Adobe Acrobat 8 Standard (serial number < removed >). I bought new about 3 years ago and have my original CD, box and the serial number. I had to reformat my hard drive and reinstall windows 7 original. Everything is OK. Now I'm trying to reinstall my Acrobat 8 legally bought and paid for, but he says that it cannot connect to Adobe to confirm my serial number and gave me only 30 days use because it is not registered.
Help, please
Post edited by: Bil Colthurst
Serial number and activation support (non - CC) https://forums.adobe.com/thread/2041990 to adjust the number of activations
If the cat person sends you back to this open forum, you are out of luck... only Adobe can help, nobody here can access the activation server
-
Je am a customer Subscriber to Adobe Creative cloud for a while. I have problems. This month they do not have decision-making my driver's license. All the programs have been Update test version. I need to your emergency help please
Hello Mara,
If you are facing lawsuits error on CC2015, please see the help document:
https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html
Kind regards
Sheena
Maybe you are looking for
-
How can I put bookmarks into folders of different topics?
How place subject files in my list of bookmarks to better organize my favorites depending on the subject?
-
I have family xp SP2 installed. After that I have sp3 insalled I can't get back on the internet, no matter how I try disconnects immediately. I tried a number of facilities and whenever I have to restore to an earlier date and remove sp3 to get back
-
Enter the folder deleted items instead of the email inbox
I use Windows Mail. Yesterday, I noticed that four days of e-mails had not been delivered. However, today, I find that they are issued to my deleted items folder, I put now so that the folder is not emptied when I turn off my machine. How can I ge
-
BlackBerry Smartphones registration e-mail
I just bought BB 8700 c, second hand, but have no business email of record or pass... how and where can I get that? My network provider told me that they cannot provide me with that? So what now?
-
Why BC did convert to the site level model .dwt .html on the server?
-J' created main.dwt in dreamweaver cs6-created the new template in the admin-pasted the html code of main.dwt in there-published but will not preview and-BC converts the .dwt .html-When looking at files on remote display the .dwt is .html on the rem