have Netgear WN3000RP but can not connect to internet

Similar Questions

• Have reloaded LR6, but can not get into my catalog

  Have reloaded LR6, but can not get into my catalog

  Hiwandao,

  Where your Lightroom Catalog?

  Have you registered in an external drive?

  Refer to retrieve the catalog and images after resetting preferences in Lightroom and let us know if this helps.

  Kind regards

  Assani

• I had to reset my computer and now I am unable to install Photoshop elements 12.0. I have the record, but can not find where to install

  I had to reset my computer and now I am unable to install Photoshop elements 12.0. I have the record, but can not find where to install

  Hello

  Please Photoshop elements help | Download Photoshop Elements | 10, 11, 12, 13

  Hope that helps!

  Kind regards

  Sheena

• Watch WiFi is connected but will not connect to internet

  I have an iPad 2 which, all of a sudden (in the Middle streaming), is more connected to the internet.  I rest the network settings, when this does not work, I have reset all settings, stopped and rebooted, all done basically.  It shows that its connected to my WiFi, but will not connect to internet.  All the other devices in my house work, then there must be a problem with the iPad.

  Reset the router: just pull the power for a few seconds and reconnect. No parameter to get lost.  Other devices operating with success is not serious. The router has probably received an invalid address for the iPad.

• Help CC can not connect to internet

  All my apps updated CC and my CC very well, Connection Manager works BUT help in ANY CC request said it can not connect to internet. I would like to press F1 or click Help instead of having to open another browser window and google my question all the time.

  

  Hello

  Please see the link: cloud creative activation and troubleshooting of sign-in

  Hope that helps!

  
  

  Kind regards

  Sheena

• I have been connected to the internet (wireless), then I unplugged the router and now I can not connect to internet. I tried diagnose the problem, but he said that he could not.

  I have a wireless internet connection for my laptop. I was connected to the internet, and it worked very well, so I had to unplug my router and all of a sudden I can't connect to the internet more. When I open the available networks, I hit connect on mine and he said: it does not work then I hit "diagnose the problem" and then, he says he can't. Also it is not even give me the option to set my password to connect to my network, but it does when I try to connect to any other.

  I suggest to unplug all your network cables and unplug the adapter from your modem AND router. ONLY plug your modem back power adapter in. Wait until you get a steady green light on your router, which indicates that it is ready. Then, connect the ethernet cable from your modem to your router INTERNET port. Connect the ethernet cable from your computer to any other ETHERNET port on your router. Finally turn the monitor for your router.

  If you do not do so in this order, the router can not connect properly to the internet because it doesn't have the correct IP address of your modem.

• Satellite M305D-s4831 - I can not connect to internet

  Model - Satellite M305-S4831 (brought to the black Friday)

  Problem: I simply restart my laptop, and I can't go on the internet.
  My modem and router that a sharuter works very well, the connection between my PC to the router is good, but can not go on the internet.
  I went to the network and sharing Center, and the windows network diagnostics stipulate that:

  "" www.microsoft.com"is not configured to establish a connection on port"World Wide Web (HTTP) service"with this computer."

  I used the Toshiba recovery media disk (included when I brought my laptop) to restart my laptop.

  > My modem and router that a sharuter works very well, the connection between my PC to the router is good, but can not go on the internet.

  You have configured the router with the data from your ISP (internet service provider)?
  Without the right data you come out not and will not be able to reach all of the Web sites.

  But if the router is configured correctly, then this could be a problem with your firewall software or its configuration.

  I also read that different Anti Virus software may cause this problem, especially if you use different tools. A guy has had this problem, because it used the Norton Internet Security and Kaspesky. The two applications were not compatible and have blurred the internet configuration.

  By the way; have you tried to connect via LAN or WLan? Check both!

  Here you can also find some interesting and useful Microsoft documents:
  How to troubleshoot Internet Explorer 7 in Windows Vista:
  http://support.Microsoft.com/kb/936215

  How to optimize or reset Internet Explorer 7:
  http://support.Microsoft.com/kb/936213

• can not connect to internet with Quest DSL. Quest DSL support said that the NETWORK adapter is missing

  Original title: can not connect to the internet on a desktop computer Windows XP Prof

  I try to use your older desktop with Windows XP Prof  I use Quest with an ADSL connection and that you have a wireless connection to a laptop.  The office is not wireless. I connected the cable earthnet and quest tell me that I don't have "NIC" on my device manager.  Anyone know how I can receive and install on a computer without internet connection?  Thank you

  L E K, I'm sorry, but I don't know the answers to the other questions. After you enable the NIC, can you check your service manual for an explanation of the other choices? Maybe someone else can answer these questions. Liz.

• After that the virus can not connect to internet

  My computer running Windows XP has been infected by a virus 'Alert system' fake who took over the office and hide all my files. I was able to restart in safe mode, run Malwarebytes and Microsoft Security Essentials to capture and remove some viruses. I was also able to display most of my files and desktop programs. (I also tried to do a system restore, but this doesn't seem to work). However, I can not connect to the INternet using Internet Explorer. I reset IE, but I can't always connect. It seems that IE starts to open the URL, but is then blocked somehow by the virus, which redirects to the default "diagnose the problem. The cables are connected and the Internet works. What other options are bypassing them that blocking and/or resettlement of IE.

  The error you received seems to indicate that there is a need to reset Winsock.  You could try running the FixIt program contained in this article, or the manual procedure:

  "How to determine and recover Winsock2 corrupted in Windows Server 2003, Windows XP, and in Windows Vista"
    <>http://support.Microsoft.com/kb/811259 >

  HTH,
  JW

• After windows update yesterday I can not connect to internet

  I can't connect to Internet after update last night. This happened last week too. Last week, I disabled the norton firewall and was able to connect. This week it does not work. When you try to connect to the database's data/program it states: could not connect to the database server. Please check that you have a working internet connection and that the application is configured correctly.

  Hello Carise,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  This problem can occur either because of corrupt network drivers or incorrect network settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions in this article and check the issue.
  Reference:
  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• I have Photoshop CC, but can not get perspective distortion

  I have Photoshop CC, but cannot deform point of view

  Fact was, great! Thank you very much for the tips, now happy

  Regards Bert.

• iPhone connects to the wifi but does not connect to internet

  I have an iPhone running iOS 9.3.2 6s (last updated).

  The phone connects to the wifi network, but even if it's to show the signal strength is good, the phone does not charge any internet content (weather, FaceBook, email, etc.).  If I disconnect WiFi and use the data, it works very well.  We have no problem connecting to the computer or a smart TV network wifi and internet connection.

  This also happens with my daughter 5s iPhone and iPad for my son.

  Sometimes it will work fine on wifi, then a little while later I can't get anything to load. And it can be like right now when I'm at home alone is not as if there's a big load on our wifi.

  We have high-speed internet by cable (25 MB/s download speed) and a router Lynksys EA3500.  Encryption is set to WPA (not WEP).

  I tried to go into my phone settings and reset the network.  Always problems.

  It's really frustrating because you eventually switch to our mobile data and use it instead of our data ' wifi '.  And then to go on our data on our phone plan

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• Qosmio F30: Can not connect to internet with WiFi safely

  I recently purchaced a Toshiba Qosmio F30 laptop and have spent the better part of two days trying to connect to wireless internet. After constantly call Wanadoo (my provider) and accusing them for all this, I thought that the laptop itself is at fault.

  What happens is when I try to enter my network key (WEP), default is a different key that I can't see that it's all in the points! This continues to be and im am totally unable to enter my network key. Until it is I turn off security on my livebox thingy and connect unsecurely and as I live in close proximity apartments, other people can and probably will connect to my internet, and I am also told that makes me more at risk of viruses and other.

  I apologize for my lack of technical jargon, and that I can not give a more descriptive... uh... description, but I'm just a beginner and not the most in computer science.

  Any help would be appreciated more!... Why is nothing simpler!

  Hi Luke,.
  Have you tried WAP (shared key) instead of WEP.
  In this way, you will need to make your own key instead of having the it generated by the router.
  It is also safer.

  To do this, you must enter the settings of your router (usually http://192.168.1.1 or http://192.168.0.1), enter the password provided by Wanadoo, then click Security. Change the setting WEP WAP (or shared key) and enter a 10digit password then you will need to enter it again when your computer tries to connect to the router again.

  It is best to use a wired connection to change settings, then disconnect the cable and wireless.
  If you notice that you are connected wireless to the router, and your internet connection is dead, temporarily disable the LAN (reactivate when you are satisfied with your connection works). This would happen if your computer includes your wireless network connection to other computers and the wired connection like you internet connection (even if there is no wire connected).

  It is also important to change the administrator name and password to access your router (this would prevent your neighbors children playing to change your settings).
  Let me know if you have more problems.

• WRT54G will connect to the network but will not connect to internet

  Guys, I installed an older Linksys CM100 cable modem and when I did I lost the connection to the internet using the WRT54G Router. I can connect fine net when I go to right fromt the modem cable to the pc. I can use my home network very well. I did a firmware upgrade, does not. I'm losing my mind. It worked fine before the new cable modem. Does make sense to anyone? BTW, I can't connect to the internet via wired or wireless connections and ping www.google.com gives 100% packet loss. Ditto for a ping to 192.168.1.100 (cable modem) when the router is connected.

  Dear God please help me

  -Jacob

  Thus, because no one here was able to offer all the help, I called tech support and was very surprised. I was able to get a tech immediately and without going through the 1 million on the phone buttons. The service is in India, but I could communicate well enough with him, even though I usually have people of understanding of handful who speak English as a second language. The issue that I had was that the default IP of the modem cable (192.168.1.100) and ip address of the router (192.168.1.1) were too similar. Apparently, the fact that the 3rd number 1 for both series was the cause of the problem. We changed the IP address of the router to 192.168.5.1, power cycling it and unfortunately it worked.

• WRT610N wireless can not connect to internet

  I have a WRT610Nv1. It worked perfectly for about a year until my internet whent out. I have reset my modem and the router and one day more late my wireless connection could not connect to the internet. I can connect to my wireless router, but I can't do it to the interenet. However, if I use a wired connection, I can connect to the internet. I have tried power cycling, releasing the ip - IP, MAC address, change the beacon interval, fragmentation & rts threshold, change the ip address of the router, encryption, disable my firewall, disabling of cloning to renew the upgrade of the firmware.

  I even bought a new WRT610Nv2 and had the same problem. I spent four hours on the phone with support linksys technique, and they couldn't help. Only, they went through the basics and everything I had already tried. I call the comcast tech support, and they say it's a problem of router and they can't help me.

  I have comcast cable with a modem of the RCA, a Dell XP laptop.

  Ethernet wireless network connection card:

  The connection-specific DNS suffix. : hsd1.ca.comcast.net

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IP address...: 192.168.2.100

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. :

  DHCP server...: 192.168.2.1.

  DNS servers...: 192.168.1.1.

  68.87.76.182

  68.87.78.134

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : hsd1.ca.comcast.net

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IP address...: 192.168.2.101

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. : 192.168.2.1.

  DHCP server...: 192.168.2.1.

  DNS servers...: 192.168.2.1.

  68.87.76.182

  68.87.78.134

  Any help would be greatly appreciated.

  Finally! I copied the MAC address of my wireless card and manually put in the MAC address clone. This does not work, then I went back and clicked on the 'Clone MAC from my PC' button (which I had already done a dozen times before). After ten days, I guess the stars were aligned and the network gods were looking down on me because he suddenly started working.

  So I'm crazy and tried to restart my laptop, and it still works. So for fear of messing with anything now, but I'm going to live dangerously and turn on encryption.

  Thanks to all those who have offered support.