Have problems when you try to connect the app

Similar Questions

• Windows media player error "Windows Media Player has encountered a problem when you try to read the file" after burning CDs.

  Original title: "missing songs" in my windows media player then burn them on several cd :((

  I burned songs to several cd using my Windows media player to make different Cd, but after I returned to my library all the songs that I burned to the CD have disappeared, they are there, but they won't play it is as if they have been deleted, a window appears saying that windows media player has encountered a problem when you try to play the file. I did not notice this until after Cd burning a few I can't do more because if I keep going I'm not going to have more songs in my library! I don't know what to do im going crazy, it took me a long time to get all of these songs and now he disappeared! I have Windows 7 Ultimate is the version 12.0.7601.17514 hope that helps

  Hello
   
   
  They were playing before you burn CDs?
   
   
  Method 1:
  
  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
  Open the troubleshooter in the Windows Media Player library:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
  
  Method 2:
  
  This problem may be due to database corruption. You can delete the Windows Media Player database and check if the problem persists.

  Steps to clear the database of windows media player:

  a. exit Windows Media Player.
  b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.

  Note you don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.

  b. Click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.

  c. Select the Media Player folder, and then click on Delete on the file menu.

  d. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

• Problems when you try to move the 3 stepper motors

  Hello

  I have problems when I Isaiah to compile a 3 stepper motors control program.

  I have 3 steepest motors and controller (3 SMCP33 + SMCP33-EVA) nanotec.com, they also provide an example of Vi to control a motor that works successfully, but problems happen when I try to adapt the program to try to start the 3 Motors. The final application for this is going to be a Cartesian robot XYZ so finally I need to program coordinates to move the 3 Motors.

  I am new to LabVIEW, so what I do is try to adapt the nanotec example to order 3 engine as follows.

  -J' I assign each engine a different address, doing so that I can run each engine separately. But when I try to run 3 programs at the same time, they work but all moving them the engine (the first that has been run).

  -If I try to make a sort of sub - VI is the same thing, only one motor is driven.

  -Moreover, I get a warning when I try this, I have attached a screenshot of this.

  I have attached the Vi and texture it to improve my description.

  I woul be grateful if someona can help aport.

  Kind regards.

  Thanks for posting the original.  By comparing the two screws immediately gives an indication of what might happen.

  In the picture you posted you circled two places where you changed the address of the reader. In the Example.vi - Nanotec address of the player is connected to about 14 seats.  So when you try to run the other engines in your modified program, the 12 places, you have not changed the address of the player are always preset to motor 1.

  What you need to do is to divide the example VI in at least three parts.  The first part initialization. The next part moves the engine.  The last part ensures that the engine is stopped and made any required another stop.  Each party becomse a separate Subvi. Each Subvi has the address of the reader as input.  The initialization and shutdown parts are placed before and after a while loop.  The movement parts are inside the loop.  You can use three of each sub - VI for the three engines or a Subvi combined with subVIs move three to manage all three engines.

  I can't say what approach might be better without knowing more about how you plan to order the engines - one at a time or all three at the same time, what kind of feedback is used, how management mistakes and other topics.

  Lynn

• "Gateway router not found" error when you try to connect the TiVO DVR with DLink router.

  Original title: gateway router not found

  try to connect the tivo series 2 to the internet with dlink router that he used to work with previous tivo but not with tivo now, it says gateway router not found
  However, my laptop works fine with the router, I tried tivo support nothing helps, too, if I use the phone line works of tivo, but do not store a lot and is running out of room so it will not work fo rme, helllpppppppp thanks

  Hello

  Where exactly you get this error message?

  See the troubleshooting suggested in "Network error message N07 or C107" steps from this link.

  If you try to connect the tivo series 2 to the internet with dlink router then check out the link below:

  http://support.TiVo.com/app/answers/detail/A_ID/400

  Please contact the manufacturer.

• Error when you try to open the app Itaú

  When I try to open the app Itaú (Bank of Brazil), this error occurs:

  Note: I've already opened a ticket with the support of Itaú, but this error occurs only with me. A few months ago, this app worked great.

  Newspaper report:

  Process: aplicativoitau [1921]

  Path: /Applications/Itau.app/Contents/MacOS/aplicativoitau

  ID: com.itau.aplicativoitau

  Version: 1.13.2.26 (2171.65)

  Code type: X 86 (native)

  Parent process:? [1]

  Manager: aplicativoitau [1921]

  User ID: 501

  Date/time: 2016-03-03 23:51:59.099-0300

  OS version: Mac OS X 10.11.3 (15 d 21)

  Report Version: 11

  Anonymous UUID: 7FAC3220-CD99-407D-F587-443B2918867B

  Sleep/wake UUID: D6203505-A76F-4F43-A884-DB922EE874EA

  Time since started awake: 14000 seconds

  Wake time: 11000 seconds

  Integrity of system protection: enabled

  Crashed thread: unknown

  Exception type: EXC_BREAKPOINT (SIGTRAP)

  Exception codes: 0 x 0000000000000002, 0 x 0000000000000000

  Note the exception: EXC_CORPSE_NOTIFY

  Unavailable backtrace

  Unknown thread crashed with X 86 Thread State (32-bit):

  EAX: 0 x 00000001 ebx: 04463760 ecx 0 x: 0 x 00000000 edx: 0x00000000

  EDI: 0x93aa5ebe esi: 0x050d7c00 ebp: 0xbffff0f8 esp: 0xbffff0f0

  SS: 0 x 00000023 efl: 0 x 00000286 eip: 0x93aa6837 cs: 0x0000001b

  DS: 0 x 00000023 are: 0 x 00000023 fs: 0 x 00000000 gs: 0x0000000f

  CR2: 0x0d0f3000

  Logical CPU: 2

  Error code: 0x00000000

  Trap number: 3

  Description of the binary images not available

  Summary of the external change:

  Calls made by other processes for this process:

  task_for_pid: 1

  thread_create: 0

  thread_set_state: 0

  Calls made by this process:

  task_for_pid: 0

  thread_create: 0

  thread_set_state: 0

  Calls made by all processes on this machine:

  task_for_pid: 6953

  thread_create: 0

  thread_set_state: 0

  Model: MacBookPro9 2, MBP91.00D3.B0C of BootROM, 2 processors, Intel Core i7, 2.9 GHz, 8 GB, MSC 2.2f44

  Graphics card: Intel Graphics HD 4000, 4000, Intel HD graphics card integrated

  Memory module: DIMM0/0 BANK, 4 GB DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020

  Memory module: DIMM0/1 BANK, 4 GB DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (7.21.94.136.1a1)

  Bluetooth: Version 4.4.3f4 16616, 3 services, 18 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en1

  Serial ATA Device: APPLE HTS547575A9E384, 750,16 GB HDD

  Serial ATA Device: MATSHITADVD-R UJ - 8à8

  USB device: USB 2.0 Bus

  USB device: Hub

  USB device: FaceTime HD camera (built-in)

  USB device: USB 2.0 Bus

  USB device: Hub

  USB device: Hub

  USB device: Apple keyboard / Trackpad

  USB Device: IR receiver

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  USB device: USB 3.0 Bus

  Bus crush: MacBook Pro, Apple Inc., 25.1

  Additional logs:

  Last login: Mar 17 Nov 18:05:52 on console

  MacBook-Pro-of-Luiz-Miller: ~ luizfernandomiller$ /Applications/Itau.app/Contents/MacOS/aplicativoitau; "exit";

  2015 11-18 16:10:40.437 aplicativoitau [1043:62962] an untrapped exception was raised

  2015-11-18 16:10:40.437 aplicativoitau [1043:62962] NSConcreteMutableAttributedString addAttribute: value: range: nil value

  2015-11-18 16:10:40.437 (aplicativoitau [1043:62962])

  CoreFoundation 0 0x93f35c19 __raiseError + 201

  1 libobjc. A.dylib 0x9ae52f11 objc_exception_throw + 276

  2 CoreFoundation 0x93f35b2d + [print raise: format:] + 141

  3 Foundation 0x9e1d8c28-[NSConcreteMutableAttributedString addAttribute: value: range:] + 141

  4 aplicativoitau 0x0003292e aplicativoitau + 203054

  5 Foundation 0x9e1bd789-[NSObject (NSThreadPerformAdditions) performSelector:onThread:withObject:waitUntilDone:modes:] + 1071

  6 Foundation 0x9e1bd2c5-[NSObject (NSThreadPerformAdditions) performSelectorOnMainThread:withObject:waitUntilDone:] + 160

  7 aplicativoitau 0x0003729f aplicativoitau + 221855

  8 aplicativoitau 0x00006f65 aplicativoitau + 24421

  )

  2015-11-18 16:10:40.437 aplicativoitau [1043:62962] * reason for termination due to an untrapped exception "NSInvalidArgumentException" app,: ' NSConcreteMutableAttributedString addAttribute: value: range: nil value '

  First throw of the call stack to the:

  (

  CoreFoundation 0 0x93f35c19 __raiseError + 201

  1 libobjc. A.dylib 0x9ae52f11 objc_exception_throw + 276

  2 CoreFoundation 0x93f35b2d + [print raise: format:] + 141

  3 Foundation 0x9e1d8c28-[NSConcreteMutableAttributedString addAttribute: value: range:] + 141

  4 aplicativoitau 0x0003292e aplicativoitau + 203054

  5 Foundation 0x9e1bd789-[NSObject (NSThreadPerformAdditions) performSelector:onThread:withObject:waitUntilDone:modes:] + 1071

  6 Foundation 0x9e1bd2c5-[NSObject (NSThreadPerformAdditions) performSelectorOnMainThread:withObject:waitUntilDone:] + 160

  7 aplicativoitau 0x0003729f aplicativoitau + 221855

  8 aplicativoitau 0x00006f65 aplicativoitau + 24421

  )

  Trace/BPT trap: 5

  Logout

  Saving session...

  .. .copying common history...

  .. .saving story... truncate the history files...

  ... done.

  Removing expired sessions... 6 completed.

  [Processo concluido]

• I have problems when you try to use a current OSX on my Mac eco system, causal link - specific needs on the three or four main applications.

  My systems include the MacMini, MB Air, Pro MB [all 2011] on OSX 10.8.5 Mountain Lion, with a MacMini extra [2011] with the help of El Capitan (for the purposes of the trial) as well as an iPadAir2 and an iPhone - both on iOS 9.

  I joined the eco system (from Windows) Mac to Snow Leopard and fortunately this used for all my needs. moving through the Mountain Lion and Lion (quickly), where I is a happy user!

  Failure to make progress in terms OSX is the result of...

  1. my extensive libraries of pictures were worked on - and are still being held in - iPhoto ' 09 (8.1.2) - which met my needs exactly - I have many albums which photos should be sorted manually - that is to say, not by Date, the former/Newest or title!  So, the current Photos app does not work as well for me on for my Scrapbook sort, although apparently it allows the movement only photo by mouse?
  2. I made 'heavy' use of iCal using many individual alert entries (!) of my choice as to the date, time, etc. and not very limited alert options offered by the newer versions (iOS-like) to iCal, where I use the alert custom-making every time! I avoid editing or for alerts in iOS 9 because o f the limited options available.
  3. I am a user passionate worksheet and delayed moving on numbers of Excel. I moved platforms for Cougar and live joyfully on numbers now with stored copies online as well.

  Tempting to work in El Capitan, I am "forced" to spend my worksheets to the most recent numbers app when I come to save and cannot then use the 'improved' version recorded on my systems of Mountain Lion (where I still pure copies!) -similar events occur when you use Pages; the lack of recoil connectivity is a major drawback for me that I apparently must keep OSX Mountain Lion to use my key apps 'base' to meet my needs!

  Are there workarounds 'smart' (or applications) that will overcome all (or part) of these "disadvantages", allowing me to good progress and update on El Capitan OSX (and Sierra at the right time)?

  I have to start using a different calendar system to have the usable alert options (which deviates from the eco system) systems on the scale?

  Should I go back to using Windows Excel (or Online) to my spreadsheet to have facilitated cross-OSX usage?

  Thank you.

  On applications of numbers and Pages, there is a real problem if you need backward compatibility - alas, I don't have a solution for you.

  But I do not understand what limits you talk in calendar alerts. I can add events and alerts for them in El Capitan (and now Sierra) using the same methods that I used in previous versions. I can receive messages, sounds or emails in any number and both custom of my choice. Can you serious? Maybe post screenshots of before and after? I'm not available for the comparison of older systems. There are indeed limits if do you the same thing in iOS, but AFAICT not on the mac - and, especially, the alerts personalized on the mac are correctly transferred to the iOS device that I use (an iPhone), to my first mac.

• OfficeJet 6500 more e a-> HP - DQEX5.exe problem when you try to install the CD

  I bought above mentioned printer.

  REF: CN557A

  SN: [personal information]

  I use Windows XP

  Follow the start-up procedure quick and everything worked well.  I'm at the stage now where I had to put the CD, follow the configuration steps.

  I deleted the old HP software (from my HP printer) previous first. Then I tried to install it and whenever I get an error after awhile, saying there is a problem with HP-DQEX5. EXE. He closes the Setup program.

  I tried several times, but it does not work. Today, I deleted the first update HP (I think it was installed last night, when I was trying as well). Then started again, but without success.

  I NOT connected the USB cable, as the manual says not to do so until the installation program tells me to do.

  Could someone please try to help me?

  I get very upset, frustrated and so on. Plug-and-play said. Care Yes, don't play yet. = o)

  Thanking you in advance.

  The old printer may have some components behind which can be erased using a normal life to left uninstall method. What printer model was your old printer?

• Authentication problem when you try to connect

  I have a Linksys router. Connected WN2000RPT as described in the instructions of Netgear. Everything went through the lights very well, good, EXT appears on the scan available networks, etc. Tried to connect a Smart TV Vizio and burn TV Amazon tablet Asus. All 3 devices show... EXT with a strong signal. However, each device does not, connect with an error message 'Authentication problem' or simply 'cannot connect."

  My router is connected using personal safety ' WPA2/WPA mixed. " When you configure the wifi extender, I said to use the same SSID and the security that the router setting. Online reading on the settings available on the WN2000 and decided that the problem was perhaps a "lag" in the security implementation because WN2000 is not the same as available router setting. Do you have a factory reset on extension and returned to through the procedure, only not selected use the same level of security as a router, but manually selected WPA/PSK (AES) for the Extender. Same exact error of my devices as before.

  I thought that maybe by using the security settings of the router it was to spoil the Extender because they do not have the same settings available. But perhaps using different parameters (when the Extender receives the signal from the router, but perhaps on a "pass-through" only basis?) problems as well?

  So, can someone tell me if there is a way to get my devices to connect to the Extender, or this is always going to be a problem because the router has a security setting, and if I manually set the security OR say scope to use the same security settings, it will not work because the two units are not compatible? I'm doing something wrong? Any ideas? Thank you!

  Hello RealisticDave

  Did you have a different SSID on the router and not the same as routers SSID?

  DarrenM

• HP Officejet 6600: Connection error when you try to use the Apps?

  I am trying to use the applications so that I can scan to e-mail.  When I try to open apps, I have a connection error.  I have run the wireless network test and all pass and the signal is excellent.  The eprint works very well.  I can't understand why I get a connection error when the wireless is configured and passes all the tests.  I tried scanning HP doctor thing and could not help solve it.  I'd appreciate any help.

  Thank you!!

  I had to delete web services and then add it again. Seems to work fine now. Thank you!

• SyncCondvarWait_r() problem when you try to connect HTTP tutorial

  Hello

  Currently, I'm learning how to handle the HTTP on BB10 connection. After Beta2 I find tutorial heredeveloper.blackberry.com HTTP connection.

  Generated the project successfully, but when I debug him on Simulator (10.0.0.6 version, oh I use Mac OS X Lion if that's important), I get the error message until the application ran: no source available for 'SyncCondvarWait_r() to 0xb0bf9c76. After that the application does not start.

  Someone knows what is the problem and how can I solve the problem?

  Thanks for your help

  Hello

  I was unable to reproduce your problem.  I joined the project after completing the tutorial.  Please try it out and let me know if it works better than yours.

  Kind regards

  Daniel

  p.s. I get errors when running the application, but nothing like what you mentioned.

• Error 800703eb when you try to connect the network printer

  HII guys, can someone help me on this problem?

  I am trying to install the network printer. But I face the error code 800703EB and another description is cause to line 4 and 1 from vbs code tank.

  The following vbs code to connect the computer to the network printer:

  1. '
  2. ' Printers.vbs - Windows Logon Script.
  3. Set objNetwork = CreateObject
  4. objNetwork.AddWindowsPrinterConnection \\printserver\xerox2

  I am very grateful to the response of anyone on this issue, thank you very much.

  Hello

  (1) have you made changes before the start of this issue?

  (2) what is the brand and model of the printer?

  Perform a clean boot and try to connect to the printer:

  Step 1: Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Step 2: Try to download and install the latest printer drivers.

  Please visit the websites below:

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Install a printer on a home network

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

• Error: DF024/Exit Code: 7 - problems when you try to install the first 13 items

  Hello

  When I try to install PE13 I get the following message:

  Exit Code: 7 Please see specific errors below for troubleshooting. For example,  ERROR: DF024 ...   -------------------------------------- Summary --------------------------------------  - 0 fatal error(s), 1 error(s)    ----------- Payload: Elements 13 Organizer(64 bit) 13.0.0.0 {C75EDFE2-E94B-476D-89B6-A13C1D98BD03} -----------  ERROR: DF024: Unable to preserve original file at "C:\Program Files\Adobe\Elements 13 Organizer\Assets\locale\sv_se\zstring.dct" Error 32 Det går inte att komma åt filen eftersom den  används av en annan process.(Seq 12130)  ------------------------------------------------------------------------------------- 

  How to solve this?

  Thanks in advance!

  Best regards

  Stefan

  Exit code: 6, Exit Code: 7 Installation error - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs

• Photosmart HP 6520: HP Photosmart 6520 - error message when you try to use the apps

  I can't access is more apps on my Photosmart HP 6520.  I get the error message "error connection server - 1".

  I don't know if this problem just since I recently changed from a Windows PC on a Mac.

  I very rarely use the apps, so I don't know when it started.

  Everything else seems to work very well I would say.

  Can someone please tell me what could be the cause, or if there is something I can try to sort it out?

  I seem to be going round in circles, and I can't work on what is happening.

  Thanks for your help.

  Hey @TraceyMac,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I understand that you are unable to use the pads (Print Apps) on your HP Photosmart 6520 e-all-in-one printer.  I want to help you with this.  A recent installation of printer would not affect your performance of platelets but no loss of connection or wireless Web services could be a factor.

  Note that to access the applications and their use from the front panel of your printer requires two ingredients to be successful: 1) Wi - Fi connection and 2). the ePrint feature (webservices are enabled).

  • Touch the wireless icon () on the front panel of your printer - is the printer connected to your wireless network?  (If not, run the wireless configuration wizard, select your network name/SSID and enter your password wireless reconnect).  If you are connected, proceed as explained below.
  • Tap the icon of webservices/ePrint () on the front panel of your printer.
  • If webservices are not enabled, press OK in order to enable them and allow the automatic updates of printers.
  • This will cause your printer to print an information document describing the characters before @hpeprint.com your printer (ePrint address).  This is known as the claim code.  As another way to use printing applications available for your printer, you can sign in to http://www.hpconnected.com to program applications printing to print and review all the content that ideally will reappear on the front of your printer.
  • From there, you can click the devices tab and use the claimcode to add your printer to the site and take advantage of the available applications, it.

  If these basic steps to respond to a resolution, please, try the following:

  When users encounter this type of problem in general, I suggest from scratch with wireless printer, webservices, and apps printing configuration.  You can clear all of these parameters in a swoop by the factory default restore * your printer.

  Here's how:

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here.

  • Front panel of the printer, arrow down and select Tools
  • Select restore default

  Then touch the wireless icon, run the Wireless Setup Wizard to restore your network connection, and then tap the Webservices () and reactivate your webservices.

  If you are able to successfully reactivate your webservices, tap on the icon of your printer wireless () and make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the printer's IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer) and press ENTER to go directly to this page.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.

  No none of the suggestions above restored the functionality you're looking for?  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• always says service unavailable when you try to use the apps

  Hello

  I have a HP Photosmart 5510 and whenever I try to use the said apps try not available service later. I can't connect at all more to him.

  Alright. Press the wireless button and press 'Print report' or 'Print Info', it should print a network configuration for you page.

  After that you have, we will need to access the built-in Web server (EWS) printers. You can do this by entering the IP address of printers (from the Network Setup page) browser press and the address bar type.

  Once there, press the 'Network' tab at the top of the page. From there, you'll want to click on the button "IPv4", on the f-side of the page. It will be there for wireless and wired, so make sure you click the one for you, but you are connected. If you do not see "IPv4", you should see 'Networking', press and press "Network Address (IP).

  Then, you click the small round button next to "Manual"IP address", and then fill in the IP address, subnet mask and default gateway using the information available on the network configuration page.

  For the primary or the preferred DNS server, you will want to enter 8.8.8.8.

  For secondary school or another DNS server, you will want to write 8.8.4.4.

  Click on apply and when the message appears saying that the changes have been applied, press 'OK '.

  Press the power button on your printer, wait that it completely power off and press it again to power it on.

  Let me know if that solves your problem.

• When you try to install the apps

  I'm trying to install applications. Why I see TRY on the apps that I need and that you install on the apps I don't need

  TriPow the test option indicates that the application is not included in your subscription.  You will receive the installation option for all applications that are included and you meet the minimum requirements of the system.  Please, see install and update the apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html for more information on how to install the Adobe Creative applications provided with your membership.