Have to 'fix' the computer internet connection always

Similar Questions

• CC Test version significantly slows the computer & internet connectivity

  I downloaded Adobe CC as a trial version not so long ago, and since then my computer has slowed down considerably.

  Most affected is my internet connection, it's ridiculously slow even when I close all applications. This makes him send a simple email difficult.

  (I even tried to delete all programs except for Lightroom and Photoshop)

  Y at - it a setting I can change?

  Applications run constantly in the background, "opacifications around" and checking the update etc.?

  Any other suggestions?

  I really need to subscribe to Adobe CC once my testversion runs, but obviously I can't if this problem persists.

  Vanessav7521346 Adobe Creative applications are installed on your local computer.  If you fear that installation of Photoshop and Lightroom have affected your system performance and Internet connection so I recommend you to remove applications.  If this downturn is resolved, you can then reinstall each application to determine that can affect your computer.  You can find more details about the process of uninstallation and installation to Creative Cloud help | Download, install, update or uninstall applications.  We invite you to update this discussion if you have any questions about the installation and uninstallation process.

• How to fix the 'No Internet Connection' error

  I installed the new version of the creative cloud today but am now cannot install new software CC that I get a message "No Internet Connection":

  

  I had a similar problem with a CS6, not being is not able to connect to the creative cloud, but was able to download and update software CS6. My workstation is located on a corporate network that is connected to the internet through a proxy. Adobe.com has been added as a trusted site and have no problem connecting to the site.

  Anyone know how I can get this working behind a corporate firewall?

  Thank you

  S Williamson please consult your it Department to the Adobe Creative Cloud Service access Documentation for the TI section of http://www.adobe.com/devnet/creativesuite/enterprisedeployment.html.

• I can connect to the internet have the perfect internet connection, but each webpage says its does not

  I know that it is not my internet connection my bf and I are one the same internet connection and his works fine what else could be

  Hi Stoner,

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Which web browser is installed on the computer?

  Method 1
  Step 1: I suggest to start the computer in safe mode and check if the problem persists.

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-in/Windows7/advanced-startup-options-including-safe-mode

  Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.
  Method 2
  I suggest you try the steps from the following link:

  What to do if Internet Explorer stops responding (applies to Windows 7)
  http://Windows.Microsoft.com/en-in/Windows-Vista/what-to-do-if-Internet-Explorer-stops-responding

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
  Note: Microsoft does not recommend that you disable the antivirus protection in most conditions. Disable the antivirus protection that temporarily to restore a computer.

  I hope this helps. Let us know the result.

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

• When I try to convert a .pdf file to Excel, I have an error message 'no internet connection' and I'm connected to the internet.  Happen in different contexts of internet access.

  When I try to convert a .pdf file to Excel, I have an error message 'no internet connection' and I'm connected to the internet.  Happen in different contexts of internet access.

  Hi rhondas44981464,

  Try to use the export to PDF online service https://cloud.acrobat.com/exportpdf (Sign In using your adobe ID, in which you have the subscription).

  Kind regards
  Nicos

• I stopped to receive mail after December 31.  It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?

  I stopped to receive mail after December 31.  It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?

  MacBook Air, OS X El Capitan

  First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.

  From the Mail menu bar, you select

  ▹ Connection Doctor window

  In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

  Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.

• How can I fix REALTEK RTL8101 internet connection problem?

  Hi, I have recently reinstalled my whole OS system on the desktop Dell vista (Windows Vista Home Premium SP1, Intel Celeron processor bits)

  It is stating that "the network adopter"REALTEK RTL8101 FAMILY PCI-E FAST ETHERNET NIC (NDIS 6.0)"knows driver or hardware related issues."

  My internet connection on the primary computer works fine. But between my router and dell computer internet connection does not work. I do not use wireless. The computer is directly connected to the router by ethernet cable.

  What do you think is the problem? How can I solve this problem?

  Go to the website of Dell here:

  http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection

  Then, download and install the drivers for the network card in your PC.

• When I click on Windows Update, he says that he cannot work and maybe I have to restart the computer.

  Hi, when I click on Windows Update it says that he cannot work and maybe I have to restart the computer. But when I do it always appears with the same. In services, it is configured to automatically update windows and is started. Can anyone help?

  Hello

  
  Method 1:
  You can run the fixit. Check out the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
  Method 2:
  You can run the fix provided in the link and check out them.
  Resolve security issues to protect and secure Windows automatically
  http://support.Microsoft.com/mats/windows_security_diagnostic/
  Method 3:
  You can read the following article.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Note: if bad sectors are found by running the check disk utility and if the attempt to recover bad sectors is verified when checking the disk for errors, data in the bad sector might be lost in the attempt to recover bad sectors.
  Method 4:
  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: when running Scan disk hard if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost.
  See also:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions
  It will be useful.

• our administrator user on the computer just connect.

  our administrator user on the computer just connect.
  whenever I click on it (it does not require a password) it tells me I can't log on because the user didn't load, I know not what to do or how to fix it...
  Please help me :(

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• My battery icon is flashing blue to Orange quickly even if the computer is connected to the power supply

  Battery problem

  Dear friends,

  My battery icon is flashing blue to Orange quickly even if the computer is connected to Power.What mean?

  This means that my battery is dead and not load? If Yes... will be the work of the computer until I repalce the battery? And is it safe to use the computer in this mode?

  Hello

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each.
  RESTART which will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

• Windows Media Player error "Windows Media Player cannot access the file. Is the file may be in use, you won't have access to the computer... »

  When you try to download an audio conference on Windows Media Player class, the following notification: Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. I was able to download in the past but now cannot. Any suggestions?

  In WMP, find the tab "Tools", "upper task bar", Search tab options when pressed.

  In the new properties window, change the tabs, connections would determine internet

  speed adjustment... Change all.

• When the computer is connected to the TV, computer screen turns off

  When the computer is connected to the tv (cable 15) the monitor of the computer turns off. the only photo is on the tv screen. I have no idea what happened to cause this

  * original title - tv monitor__ *.

  Hi rwertheim,

  Please see the following articles with additional information and troubleshooting:

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  and:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• HP DeskJet 3050 a"the printer and the computer are connected to different routers"

  I am trying to configure my J611 all-in-one HP DeskJet 3050 again on my wireless network and this is the message I get "the printer and the computer are connected to different routers" but I only have one router! (Netgear WNDR3400).  My operating system is Windows 7.  What I am doing wrong?

  Yes, you have a router, but there two (technically three) networks.  I guess that is your printer or your computer is connected to the Guest network.  Check that your PC is not on the network of comments.

• USB MTP driver fail when the computer is connected to the domain

  Hello

  Please help me solve this problem now, I had an old thread who died http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/?referrer=http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/?referrer= http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/?referrer=http: //social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/

  Please note that the cause of the problem is already, I don't want no information on reg-patches and such.

  After connect us any computer to our area, the PnP for cameras (eg. iPhone) does not work.

  Tested on several models with the same result, always work before the computer is connected to the domain.

  I can't find any setting in our group strategy which must affect installation.

  You can find the log files from the same computer, created during the installation of the MTP (with an iPhone)

  https://anonfiles.com/file/9bf2a47c44cdb2f589d544924c6ffd2b

  MTP_domain.log has been created on a clean Windows 7 64 bits connected to our domain

  MTP_no.domain.log was created on a Windows 7 64-bit clean

  Hello
   
  Unfortunately, the question you posted would be better suited in the TechNet Forums. I would recommend posting your request again in the TechNet Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro