Having a problem with the graphic quality of vector graphics in flashswf in Dreamweaver

Hello


I have a flash slide show, I built for a dreamweaver site that contains images of vecctor who lose quality when I run my site on the domain. I tested the file flash in flash is superb. I saw in live mode view in dreamweaver graphics look smooth but when I load my files ftp on my account from the host and test from there, the quality of the edges of the vectors is not smooth. I see a lot of irregular contours and don't know why.


I test everything on my monitor 24 inch so the graphics are probably enlarged but even when I test the flash in flash file and the html file from my hard drive to a browser such as firefox my graphics are smooth, so don't know if his problem-solving.  also tested my site on my laptop which is a smaller screen 15 inches and the graphics look bad on the website there too. F of course it's a problem of resolution, I think that screen 15-inch would be showing the graphics smoothly not serrated. ?????


Anyone has any ideas or can you help me with this problem? I have


Johanna

Ok.  And just to add, you can natively import files HAVE on the Flash stage.  And I'm no Flash expert by any means, but there are a few settings, you can change.  In the document settings, you can change the framerate.  Usually 30 fps runs smoothly.  Then on the publication settings you can disable compression, increase the JPEG quality and enable hardware acceleration for computers running Flash 10.2 or later with the graphical features.

Tags: Dreamweaver

Similar Questions

  • I'm having a problem with the pictures on some pagies partially of fully duplacating other tiles nearby. Only occurs with Firefox.

    I'm having a problem with the photos on some pages partially to duplicate completely other tiles nearby. Only occurs with Firefox. The thumbnails are refreshed when I move the cursor over them, but again distort when you scroll the page. I have a few images, but cannot up-load them on this page of support for some reason any. Maybe I can email you if you need?

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe

    You can check the preferences of network.http. * on the topic: config page and make sure that they have the default value.
    You can restore the default user set prefs ("BOLD") via the context menu.

  • I'm having a problem with the FireFox browser. I have attached two files that describe the problem. I have marked their A & B. A is the way it should lo

    I'm having a problem with the FireFox browser. I have attached two files that describe the problem. I have marked their A & B. A is how it should look like and B what happens once I have, I opened several tabs. I can get it back to normal if I click VIEW, click Customize. When the window customize appears that Firefox returns to its normal state. I have to click on the done button and go back to what I did. I tried to reset FireFox back to the default settings, but that has not fixed the problem.
    It started happening a month. Is there a way I can fix this? Thanks for your help. I don't know how to fix my 2 attachments that shows the problem I'm having.
    [email address removed to protect your privacy and security]

    Try disabling hardware acceleration in Firefox.

  • Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

    Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

    Take a look at this article as it addresses this error code. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • my computer asks me to fix a problem with the graphics driver intel but windows tells me solution can not be downloaded

    computer crashed and rebooted itself. I first started in safe mode, and the computer did not find any problems but had sent a report anyway.

    To restart normally, the center of the action (or as I would say, Center!; - p), has been asking me to scan with windows defender and a problem with the graphic driver intel. Scanned well, but to solve the problem, said action solution Center could not be downloaded. I am most definitely connected to the internet and have tried to solve this question many times during approximately the last 18hours?
    Help would be much appreciated?

    Good suggestion but I tried this, had to go the manufacturer of the laptop, but still no luck. Think he was playing tricks on me in any case, as seemed to be resolved with a full audit of the system and diagnosis.

    Thanks for the effort though...
  • Having a problem with the Gallery of filters, specifically the texture and the other 5 filter filter do not meet the 'OK '.

    Having a problem with the Gallery of filters, specifically the texture and the other 5 filter filter do not meet the 'OK '.

    Go to the Photoshop preferences, then on the performance tab.

    From there please click on advanced settings, change the drawing on 'Basic' mode and uncheck the option for "Open CL" once, then try with a Jpeg file.

  • Having a problem with the Muse crashing when opening a Web site I designed in Muse.

    Having a problem with the Muse crashing when opening a Web site I designed in Muse. You need to be able to access this site in order to update for my clients.

    [LASP/updateCaches] TypeError: Error #1009: cannot access a property or method of a null object reference.

    All adventures Rafting | Wenatchee Whitewater Rafting trips - two hours East of Seattle

    Could you please send us the .muse file to [email protected] as well as a link to this topic? If the file is larger than 20 MB, you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc.. Thank you.

  • Problems with the graphics, as well as circular Buffer

    Hello

    I am having several problems with my chart. Basically, every time I move the Panel before or shake it, data do not appear to be connected and it screws to the top of the chart.

    Second, whenever my buffer fills, 50% of the time, it is this line that appears at the end of the graph at the beginning for a fraction of a second. I do not understand why it would happen only sometimes however, because many times the buffer fills, but this does not happen.

    If anyone has had this problem before and knows a good way to fix it, it would be appreciated. I tried to see and undefer updates to the front panel, but that did not help my graphic. Thus, my CPU usage is quite high.

    I don't know the details of the Galil motion card, but looks like you he might order from the UI thread. When you hold the mouse on a border of window in Windows, the user interface thread is not available for a period of time, and the call of the DLL just hangs. If you do not order the Galil with a DLL, see if the DLL is set to run in the UI thread (it will be orange.) This is the default value; LabView assumes that your DLL is not thread-safe if you identify exactly what. If the DLL is thread-safe, you can change the configuration of appeal to let it run in any thread.

  • problems with the graphics card after installing windows 7, code 43

    I installed windows 7 & my ATI-RADEON XPRESS 200 SERIES is stopped by windows 43.It code stipulates that drivers are ok... but it is not recognized... I also downloaded a few 3d Screensavers & they worked very well now, it is not able to open the screensaver because of the video card or to be compatible with Direct 3D... This question has not pop up until after you have installed windows 7, I have checked & found a lot of problems with windows 7 & ATI-RADEON XPRESS 200 SERIES drivers or recognition. Tried to update the driver but the States, it is far, but windows 7 is having a problem with drivers... Y at - it a fix for this, looks like it should be a matter of windows & microsoft should have action corrected problem because windows is caused this problem... Have installed all windows updates & all up to date... Can someone try to give me a solution to fix this problem? Not sure if they have an upgrade or accelerator program 3d graphics that may have to be installed... & again thanks if anyone can help... Have a great day...

    ATI-RADEON XPRESS 200 SERIES is an accelerator of limited DirectX 9 graphics (integrated graphics), which was

    published in ' 07 and apparently is not compatible with Win7.

    Old hardware with a Windows version compatibility isn't something that never gets fixed by SM.

    It is the mfg of the material to support the product through a driver updated, and trend of integrated graphic card

    not be supported as long as a dedicated graphics card.

    In this case support drivers apparently stopped with Vista.

    If you try to get drivers via Device Manager or Windows Update they can provide incorrect information

    What about drivers who are up to date.

    These two methods are a little known does not install the proper drivers for the graphics.

    I read that some people have had luck on Win7 with the Vista drivers for various materials. Doesn't hurt to try.

    You can download the drivers for XPRESS 200 SERIES from the AMD website below-

    http://support.AMD.com/en-us/download

    .

  • Problems with the graphics to Equium A60 driver

    Hello everyone,

    First sorry for my bad English.

    I have some problems with my graphics card driver. After a new installation, I wanted to just install the driver for the ATI Radeon 7000 (I have an Equium A60), after that, I noticed that my pc was down. The problem was because the driver, I'm sure, because after a fresh install, without the drive VGA, my laptop works, somehow... I mean, I don't know it might work if the graphics would have a clean driver better.

    I searched on the web and saw that it was not a new problem; many people have the same problem with it. Somehow, the driver of the computer is not compatible.
    Could someone help me find a solution to my problem?
    Thank you very much

    Eurytheus

    Sorry my friend, but your ad looks really amazing. Driver Toshiba of origin is not compatible with the hardware. It cannot be. It cannot be the truth!

    Your model of laptop is almost 4 years and I assume that Toshiba had enough time to react if the display driver is somewhat problematic. I recommend you to backup all your data and try to install your laptop using original recovery image. If there is no hardware problem notebook should work again well.

    Sorry, but I don't see another solution because the pilot is certainly tested and it should work.

  • Problems with the graphics card on Satellite Pro M10

    Hi, this is my first post on the forum. I'm not a pro with computers or anything... the problem I have with my laptop is similar to the one in this thread:

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26849&TSTART=0

    I spent half the day trying to figure out if my graphics card is broken, but since I'm a newbie with this stuff, I'm still not sure. :(

    This is what makes my M10. I'm trying to describe the symptoms that detailed as possible, but I'm German, so please excuse my lack of words in some places.

    1. when I turn it on, the laptop goes through the BIOS and give me scrambled BACK-screens and a slightly Warped windows loading bar. There is the consistency check, marked by black bars connecting the top of the screen down. After the audit, the screen goes black and nothing happens, or the screen of will just show me consistency check, do nothing. Be that as it may, I have to turn off the power (I think) and restart the laptop.

    2. sometimes the laptop goes through the BIOS checking & conistency with a few graphical shortcomings. The office is anything but shredded when he gets to the screen of the Windows user. The static method is if serious I don't even know where is the button turn off.

    3. sometimes Notepad starts very well, with the only graphic problem being the windows loading bar. When I go into Windows, the laptop pulls me a blue screen and stops immediately.

    4. sometimes, the laptop works fine for about an hour or two. After I rebooted, I have the same problems listed above, once again.

    5. If I open Device Manager and disable the graphics card, the laptop works very well. I have to lower the screen resolution and colors, but I can watch videos on youtube and everything. Finally, the laptop gets very hot on the bottom and the screen goes crazy again, so I turn the damn thing off.

    I don't know what that means! If my graphics card is broken, the screen should be all static, ALL the time? Not just sometimes more,... could sometimes less be some sort of communication problem between the graphics card and cpu? Please help me with this!

    Another thing I'm not sure about, even after reading the thread I linked above - can I replace the graphics card or not? Everyone said something different in the other thread...

    see you soon,
    Cozmo

    Edit: maybe I will add when I got the screen scrambled and everything. I installed Civilization 4, just to check if my satellite pro can handle, and everything went well for a while. The screen then haywire and I rebuilt my whole system, but display problems did not disappear completely. They were gone for almost a month, and now they are 'back' or something.

    Hi Cozmo

    I'm not a technician but here nobody needs technical knowledge to see that there certainly is hardware problem. I also believe that this problem occurs due to the graphics card. Graphics card is part of the motherboard and it cannot be traded separately. The entire motherboard must be exchanged.

    In my opinion, you have two options: either contact the authorized service provider in your country and speak with them, what can be done, or try to get the motherboard used. If you are lucky, you can find it on eBay. I already bought several hardware components for my old Satellite P10 on eBay.

    Sorry Cozmo but I do not see any other logical solution for you.

    Good luck!

  • Problems with the graphic driver for Elitebook 8460p

    Hello

    I m of the problems with the Elitebook 8460p driver display. The latest version (15.28.20.64.3347), published on 16 June 2014 have some problems on the laptop. When the laptop is running on battery screen suffers from flicker and damaged graphics, as you can see in this video:

    https://www.YouTube.com/watch?v=gQ1w0aOaF7A

    (you can see the flickering between 0:20-0:22)

    I contacted with support local hp and send me a COMPUTER technician, who has changed my motherboard and CPU, but nothing worked. I tried to contact with intel for support (the issue is present with drivers intel non - oem), but they are sending me to the OEM. I would like to have a real driver that works with the system (3347 is a driver of the year), is it possible?

    This isn´t of question at all in linux drivers, more change motherboard I totally ignore a hardware problem.

    I can provide feedback to any solution.

    Thank you!

    Another update:

    Found a solution to this thread (which I started) in the forums of intel:

    https://communities.Intel.com/thread/48327?start=0&TSTART=0

  • Problems with the graphics card when you use AutoCad

    Hi, I have a dell xps 18.4 - i7 with 8 GB of RAM, when I'm working with Auto CAD I face problem with my graphic card, what can I do to fix this? has any experience with that? the graphics card is Intel(r) HD Graphics 4000

    Hello

    Thanks for the reply.

    I'm sorry for the late reply.

    I appreciate your patience.

    I suggest you to try installing the driver in compatibility mode and tick.
    Reference:
    Make the programs more compatible with this version of Windows
    http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

    Please keep us informed.

    Thank you

  • Satellite M30 - problem with the graphics driver and Quicktime movies

    I just installed a 40 GB to 80 GB hard drive and installed all the drivers in the correct order, as indicated by toshiba. Everything works well except the used for Quicktime .mov files. All I get is audio but no image - other than a colorful blur screen!

    I think I've isolated the problem to the graphics driver. Whenever I turned off / uninstall the driver dedicated for the graphics card FX 5200 GP (version 4.6.44) Quicktime files work fine. It is only when I installed the dedicated driver problems occur!

    Can someone tell me why this might be?

    Hello

    Do you use the graphics driver from the Toshiba driver page?

    Try to use the QuickTime Alternative 1.77. In this version the codex QuickTime has been updated.
    This version uses these features:

    -Media Player Classic [version 6.4.9.0 + SVN build 2006-12-24]
    -Codecs QuickTime [version 7.1.3.100]
    -QuickTime plugin for Internet Explorer
    -QuickTime plugin for Opera/Mozilla/Netscape
    -Extra plugins for QuickTime
    -QuickTime DirectShow parser
    -Wrapper DirectShow QuickTime decoder
    -CoreAVC 0.0.0.4
    -CoreAAC 1.2.0.575

    check it out...

  • Reinstalling windows 7 ultimate retail after changing the SSD, the motherboard and the processor. I'm having a problem with the reactivation?

    I'll upgrade my desktop PC, by changing the motherboard, processor and SSD drive with the OS on it to boot. I have a problem with the reactivation of windows, and should I turn it off, somehow first, or the previous version will be considered as-enabled automatically? It is a retail, windows 7 64 ultimate version. Please advise, thanks in advance.

    Just reactivate by phone:

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

    Remember, if it is a retail upgrade license:

    However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

    15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

    So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

    You can skip to enter the product key and try the activation of the phone to work around this problem.

Maybe you are looking for