having changed the password problems and the power on password

problems in the password can be changed and the power on password screen. my code is 50793279 please help

Hello

Come in:

45691879

Concerning

Tags: Notebooks

Similar Questions

  • I changed the power supply on HP Media Center m470n, because he wouldn't come, it will not

    the computer would not come, he ran but quit, I changed the power supply, but it will always fuel not at all, no fans no lights.

    Be, welcome to the forum.

    Because the computer is more than 8 years old, it is difficult to say which component has failed.  Open the box and give it a thorough cleaning.  Then, make sure that all components are installed and the power supply cord is free of defects.  Here's a guide for boot-up/shutdown/power problems.  Try what they say see if anyone of them help.

    Frankly, it may simply be time to buy a new computer.  You'd be amazed at how one faster cheaper computers will be.  Here is a that would be great just as configured.  It has a processor AMD Quad-Core (2.7 GHz), 6 GB of memory and the OS Win 7 64 bit.  You can buy a monitor, too.

  • Moved from VM with Snap Shots, doesn't start: cannot change the power state of VM: internal error

    Hello

    Last week, I decided to move from a Windows host based Linux system. So I went through my VMs their power off and copied to another drive. I then installed 7 Centos and reinstalled VMWare Workstation 12 re-imported the virtual machine in VMWare and I tried to start.

    I received the following message...

    "Cannot change the power state of VM: internal error.

    Suspicious, I looked at the folder that contains the machine virtual and noticed it contained snapshots. DOH!

    I guess it is pretty bad, not sure where to start?

    Any help would be appreciated.

    Thank you

    James

    I copied VM, with and without clichés, without problems. Have a few running on OSX Fusion so

    The first thing I would check would be for folders and .lck files. If so, remove them.

    Lou

  • The former "cannot change the power state of virtual machine: the process has exited with an error: end of the error message" thing again (Fedora 8/Server 1.08)

    OK, this problem beautifully undescriptive I've seen caused by what seems to be dozens of things happening for me.

    I made the mistake of horrible update my FC8 kernel to the latest one (2.6.26.8 - 57.fc8).  Mind you, that's all that's changed.  It was with a 1.06 server with happiness and perfectly good computers running virtual in use before the upgrade.

    After the new kernel and reboot, I had to rebuild vmmod.  I had to get a fix of any - any later that I used with my previous kernel (116 does not solve the problem of compiling) so I used all-any117d.  Update like a champion.

    Try to turn on a VM and Ihanta!, the above error.

    Nothing else was changed.

    I tried the upgrade to VMware Server 1.08.  Used all-new any117d - update OK.

    Error again.

    I have re-run the compilation, this time to say 'yes' to what the installation script to "adjust the permissions of all virtual machines in xxxlist" or whatnot.

    Error again.

    1. status of /etc/init.d/VMware

    Networking networking on/dev/vmnet0 is running

    Invited only on/dev/vmnet1 network is running

    Network invited only on/dev/vmnet8 is running

    NAT networking on/dev/vmnet8 is running

    Responsible vmmon module

    Loaded module Vmnet

    FWIW, I compile as long as root, but have always run VMware server from my UID nonroot.

    What now?

    I'm in the same boat.  Fedora 8 2.6.26.8 - 57.fc8 #1 SMP

    I have tried uninstalling/reinstalling v1.0.6 thru 1.0.8 with all 116 updates and 117d.   117D compiles with every version of server but when I try to turn on a virtual computer I get this error.

    Cannot change the power state of virtual machine: the process has exited with an error:

    vmxvmdb: name of the Index generated by the configuration file

    POST (no connection): Version mismatch with vmmon module: expected 138.0, obtained 168.0.

    You have a bad version of the module kernel "vmmon.

    Try reinstalling VMware Server.

    POST (no connection): failed to initialize the surveillance apparatus.

    Failed to initialize the virtual machine.

    End of the error message.

    I found several posts other people have this problem but

    they are months with no recent activity and nothing that solved the problem.  I found appeared

    to get a fix, one updated the all an update that corrects the problem for

    2.6.26 performing several nuclei, but the link for the update on TI-psycho appears to be dead.  Here is the link to the discussion

    http://Fedoraforum.org/Forum/showthread.php?t=199026&page=2

    Of course, I would like to know how to solve this problem as well.

    Thank you

  • VB6 crashes when you try to change the power on the DIO state using NIDAQmx.

    When I try to change the power of digital output to a PCI - 6220M cardusing VB6 and NIDAQmx software, my plant of VB6.

    I have request to build a VB6 for the same card read all digital out and analog in, digital.  This app works very well.  I can't just change the power to high status.

    Hello Sir,

    I found a post on our discussion forum to a client who was trying to do the same thing as you and also ran into a crash of VB6. In his case, the accident was caused by an incorrect setting during the call to the function.

    The first part of the post office treats the correct settings. The second part of this post does not apply to your configuration, your type of card that supports under the power state.

    Please keep us informed of your progress.

    Kind regards

    Wouter

    OR Belgium

  • How to change the power state in a Service profile template

    I would like to change the "Power status" in a model of Service profile. While I can change almost all other aspects of the model, I don't find it in the UCS Manager GUI. Is it an unchangeable decision while creating the model? I can change it via the CLI?

    Hi Joernclausen,

    What version of the firmware of your UCS?

    In the CLI, try the steps below and let me know if it works.

     Go into the FI CLI and perform the steps below, ensure to enter your own template_name and select appropriate type of template followed by setting the power up or down sj-ucs-r13-mon-A# scope org sj-ucs-r13-mon-A /org # enter service-profile template_name initial-template sj-ucs-r13-mon-A /org/service-profile # power up sj-ucs-r13-mon-A /org/service-profile* # commit-buffer sj-ucs-r13-mon-A /org/service-profile # power down sj-ucs-r13-mon-A /org/service-profile* # commit-buffer

    You may also be able to change the power state of the individual service profiles

     Go to the service profile and use "Change Initial Power State" button for modifying the desired-power value.

    See attached screenshot

  • Cannot change the power state of VM: internal error

    Hello

    I freshly installed OS elementary which is based on Ubuntu.

    VMWare Workstation installation worked fine, but after creating my new virtual machine with a Win 10, the same message comes to me:

    Cannot change the power state of VM: internal error

    I looked a little in the log file, found this dump was set to zero, they changed in etc/security /, but that's all I've managed to find.

    Here is my log file

    Thanks a lot for your help

    PS: I'm leaving a beginner in the Linux world, so explanation would be welcome

    Hello

    Welcome to the VMware community forums.

    I don't think that the problem is related to a beginner linux user, it's a problem triggered by a specific hardware configuration.

    If you look at your log file again, there is an error just before the vmware process attempts to core dump. The dump is a reaction to the problem.

    vmx| E105: PANIC: VERIFY bora/vmcore/vmx/main/timeTracker_user.c:238 bugNr=148722
    

    If you then put the bug number into google, you get:

    http://KB.VMware.com/kb/1227

    Which indicates in return you can set a configuration file to specify the actual frequency of your processor.

    Your processor is an Intel (r) Core i5-3570 CPU @ 3.40 GHz

    The linux variant of the config.ini file they speak on windows hosts is/etc/vmware/config

    --

    Wil

  • Cannot change the power state of VM: cannot...   (VMWare Workstation 7 on Debian Lenny)

    Hi all, I am new to this community. I recently installed VMWare Workstation 7 on a Debian Lenny (kernel 2.6.26.2 - amd64). I had no problem with it, but when I tried to start a Virtual Machine Windows Vista, which I created it, does not start. Error says windows "cannot change the power state of VM: could not find a peer valid to connect to". "" Any idea, please?

    Josber.

    It seems that the virtual machine has been suspended when your host is using a different screen resolution

    either change back to the resolution that you used when you suspenmded the machine virtual or delete the VMS.

    This will force the VM to do a cold boot

    ___________________________________

    VMX-settings- VMware-liveCD - VM-infirmary

  • A Mac mini, purchased in the UNITED Arab Emirates can be used in the USA with only change the power cord?

    A Mac mini, purchased in the UNITED Arab Emirates can be used in the USA with only change the power cord?

    Yes.

    http://www.Apple.com/Mac-mini/specs/

    the voltage may vary from 100-240 V AC.

  • Why is my desktop stop often randomly, at all hours of the day and night without prompting even when I use the computer. This is even though I changed the power option setting.

    Why is my desktop standby stop so often?

    It appeared sometimes several times per day or night. He stops consecutively, at random, at any time of day or night time. Even when I was with the computer, there is no incentive to me. The screen is blank. My computer nevers switch down. It's on 24/7-24 hours and 7 days, 365 days.

    It happened like this:

    1. you can hear the exhaust off the computer fan all of a sudden. There was no incentive. You can hear computer calmed down suddenly. The fan can be seen from the back of the grid of ventilation of the processor of the computer of the metal casing.

    2. the screen monitor suddenly stop. The screen is blank. The indicator light on the bottom of the screen of the monitor is always lit. He showed the monitor screen is on and running.

    3. When you look at the led on the computer, it is still lit. This shows that the computer has on photo and runnig. It is dormant, however.  He showed the computer CPU is entered in mode 'sleep'.

    4. whenever this judgment occurs, I would like to shut down the computer and restart the computer from scratch. I pressed the power button on the computer to stop it.

    5. I then press again the start/stop button to restart the computer, restart the computer, and then when she comes back to life, I clicked to restore sessions, and then I keep using the computer again.

    6. the process of restarting the computer was like that, as stops have been going like that for five months and is always like that, because I have been unable to solve. The point of contact in the power button is not more urgent are frequent.

    7. I changed the VGA cable as I said by a computer hardware that my problem could be due to the VGA cable is old, as in the VGA cable copper wire that feeds on the computer to the monitor screen can be broken or twisted, and so the video signals are not stable to feed the data to the screen of the monitor.

    8. Although I don't think that was the case, as my cable never touched the ground, or cluttered or kick or broken, I still went ahead to change the existing cable 15 pin VGA to 3 years with a new as it was only 3 males - the range of the cheapest I found in the shop costs...

    9. However, even if the VGA cable is changed, the stop is always the same, as before.

    10. on another month, I learned by my friend that I should change the setting in the computer mode 'sleep'.

    11. the new settings made in start/programs/system and Security / Option/power Power Plan/High Performance / 'Turn off display' to 'Never' and 'Put on the eve of the computer' to 'never '.

    12 even if I changed the setting of "Balanced (recommended) 'High Performance'" and two high-performance setting has been changed to "Never", the judgment fixed computer sleep mode, and as usual, no warning, the screen of the monitor erased.

    13. it seems the Option "power" and "Power Plan" and "Balanced" or "High Performance" in Windows 7 does not work. Window 7 does not in my computer.

    14. whenever I rebooted and restarted the computer, it is some normal time to see the operating system, repair files stop suddenly, before may be back from normal window of operation conditon.

    15. for more information,.

    My computer is not a brand. It was customized and installed. He bought two or three years ago. The use of the 350 GB hard drive is used by 50%. The computer in the past goes to sleep when there is no movement of the mosue for 15 minutes, or when not in use. He wakes up again when there mouse moves to restart the CPU and turn on the monitor screen.

    Now, he had problem with this kind of stop suddenly attack never wake up its "sleep" again during the month five, which I believe it was several viruses in the files of e-mail in the past months, and when it is very likely that I downloaded from CNET some cleaners or anti-spyware.  I don't know what problem is.

    I then withdrew them a month later of the program/Control Panel / uninstalled program. On the advice of my friend, I then changed version free download AVG.

    16. the information contained in the computer, start/program/computer/properties, gives the following information:

    It's Intel Core Due E7500 @ 2.93 Ghz, 4 GB of Ram, 32-bit operating system, windows 7 Home Premium, 2009.

    It is a Microsoft Firewall protection and is installed with fre download AVG anti-virus protection. He is shown to start/program/system and security / firewall /- and he said: 'Stat window firewall' is 'on '.

    17, finally, with the light of the foregoing, I would sincerely ask the Microsoft community to help solve this problem of closure. I would like to thank all the people in the community who can help me in advance here.

    18. I hope to hear your solutions with you. Thank you.

    Run "cleaners" or optimizers may have caused a number of problems.

    And since you have them installed some time ago a system restore won't help.

    Run the System File Checker

    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Run a scan for malware http://www.malwarebytes.org/products/malwarebytes_free/

    Maybe to repair your installation of win

    Ensure that the chipset drivers have been updated by the author of the motherboard

  • Lost all my music after having changed the country

    Hi all

    Im having a problem with my account of Apple's music.

    I had to move from the French to Spanish store so I had to cancel my subscription to Apple's music who, after restarting my membership (on the Spanish shop this time), I realized that all my music has disappeared.

    The music is not on iTunes on my Mac, I tried to resync the iCloud library and everything, no chance.

    This means that it is not possible to keep his music when changing the country?

    Thanks for your help guys

    Anything related to music from Apple is specific to each National Bank and may not be transferred. History of purchases and nothing ripped from CD rest to you. Access your purchase history requires that you register in the right store however so keep a library of physical media is a good initiative.

    TT2

  • Satellite C - How to change the power settings for the WLAN?

    How can I change how not having the power cable plugged affects the performance of my wireless network?

    Basically, my wireless works well when the power cable is connected to my laptop, but when it is disconnected from switching between web pages takes a lot of time and the signal is lost and must be restored each time between each Web page. Is that what I can do about it?

    Hey,.

    You can find the WLAN Card settings in Windows to energy saving power management:

    How to manage Windows power management features:
    http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  • Why even after having changed the permissions can't write to my files?

    I moved files on "users / shared" on the imac 27 "my father Yosemite retina.  He got last June but was not able to migrate because of her old imac was in Florida and North Carolina.  So, I migrated the old imac again with time machine backup charges a few months after getting the computer.  Now, I'm trying to merge the 'old' on the new computer account with the migrated account 'new', I restored it with time machine from the old imac.  I thought I was smart "passage" large libraries of film and photo of users / shared and that the account migrated from old imac. (on the same computer again) But I have no write permissions for files on the migrated account.  And making matters worse, while I can't write to files, I'm still able to corrupt them trying to change permissions and try to load them with i-movie and what not.  So now, I have a 6 GB corrupted movie library and not backup.  I tried it duplication and corrupt also.

    So my question would be "why is it when I add to the new migration full privileges to user for these files, I always failed to write about them?  Now instead, I wonder if there is a way I can fix the corrupted film library file.  Film - I tried and failed on the double.    I tried available i-movie file to 'all' as well as the addition of the new migrated user full privileges to it.  While I was able to do it without error (it seems to take the changes) or the new migrated user or former user on the new computer can write to the file (i-film library) at this stage.

    Every article help I read says just to click on info and change the privileges for what I did.  So I'm pulling my hair out.

    Hope that I was not too confusing in the way that I want to talk about the two different accounts.

    Reset user - file property See post by Linc Davis

    You may need to restore the permissions on your user account. To do this, start on your recovery partition (hold down the command and R during startup) and open Terminal from the Utilities menu. In the Terminal, type: 'resetpassword' (without the), press return, and then select the admin user. You do not have to reset your password. Click the icon of your Mac hard drive at the top. In the list box below, select the user account that has problems. At the bottom of the window, you will see a box labeled restore Home Directory permissions and ACLs. Click the button to reset there. The process takes a few minutes. When you're finished, restart.

    Fix the permissions of the user

  • How to change the power supply to the CD/DVD drive so that it is disabled by default?

    When running on battery I often use the icon 'Remove hardware safely' XP to 'unplug' the carpet * CD/DVD drive for Safe some battery life. (Does?) I use Fn + Tab to bring back to life. I wonder if there is a way to make my boot Notebook (M400) with the power supply to the reader off by default. Moreover, any idea where I can find the extra battery for the slot of the CD/DVD player and who the price?

    Thanks in advance for your help.

    Hello, Robert

    If you see the start page, you will see that this support forum is not a type of support Toshiba directly but forum users. But you're not alone and many users expect that a Toshiba support team sit in the office and before writing the answers.

    In any case, there are many users of Toshiba laptops with very good knowledge and also amateurs who are trying to help the other guys in different problems and also to share own experience.

    Professionalism is not the forum but action when you need help because of physical damage or something similar. If you need assistance and competent answers each authorized partner must be able to provide the info you need. But please don t mixture and Toshiba service partner because it is not the same.

    In any case, I found the info you can use additional (second battery expansion) and it takes batteries with PA3510U-1BAL, PA3510U-1BRL room numbers. I can't tell you how much it costs, but you will find only using Google.

    Back to your first question: if I understand you just want to save more power and because of this, you want to sign out ODD. It's a nice idea, but you have clearly misunderstood something. "Safely Remove Hardware option is there to help the operating system and and say this material, a part will be removed and don t exist anymore, but it does not physically the disconnection of any other material."

    If you need more power use a second battery and enjoy your life.

    If you have any other questions you are welcome. A lot of users here M400 and I hope in the future that some of them will participate in a little more.

    Good day! :)

  • How to change the power mode in Windows 7

    Hello

    I'm not very good in English (I'm Dutch) only when I talk about games or something not to technical stuff, but I'll try to explain

    In recent weeks, I have windows 7 running on this laptop.
    First I had vista, but who was bad. Windows 7 works much better.

    In any case, I don't have day my laptop with drivers from this site.
    When I was running I was missing something.

    On the right side where you can chance your schedule 'energy', you can choose between low and balanced performance.
    On vista, I had as good, but not now.

    Y at - it an update where I can lucky who?
    If Yes please can someone tell me where to find this update.

    Greetings,

    me

    took me 10 minutes to post this because of your message contains profanity or inappropriate language.
    In the interest of your fellow forum users, we ask you to change your message.

    Hello

    Windows 7 is a bit different as the Vista operating system.
    But you can change the settings in the Power Options located in the control panel.

    Go to the Control Panel-> Power Options

    There you can find both of these options; Low performance and balanced performance.
    The high performance is hidden you will need to click the arrow to open the option where the mode performance.

    But you can also create a mode of clean energy;

    On the left you will find the option: create the mode of power (or something like that... Sorry it s just translated)
    That could be an option that lets you choose the high performance.

Maybe you are looking for

  • 630 HP: HP630: graphic driver problem

    Hello I get the following message appears when I try to install the graphics driver for your laptop HP 630: this computer does not meet the minimum requirements I downloaded the drivers on the download page. Unfortunately due to the age of the laptop

  • Satellite L500 - could not find the SRS audio device

    At the start of my Satellite L500, a message appears saying - could not find the device audio compatible srs. This has happened when I upgraded to windows 7. Can someone tell how to fix this?

  • WiFi link for printer EPSON-750 does not work

    WiFi link for printer EPSON-750 does not work. In spite of reset the WiFi on the printer and reset the EPSON 750 as default printer on the IMac, the connection between the iMac and the printer does not work

  • do I need Intel SW engine management?

    As above - I use the T540p for online studies, etc., is not a working machine. I disabled the two points in the BIOS but wonder if I should remove the SW alltogether. I got i7 I worry too much speed. Thanx

  • Location in wifi feature

    Hello! I'm just a big * beep * or is it explain how to use location based wifi? You are supposed to have the Wi - Fi button ON or OFF when you use the wifi feature location or is it intended to turn on automatically when you are in the range of a cer