Having problems setting a timeout of session for wireless LANs

Similar Questions

• Problem setting deskjet 3050 610 a for wireless printing

  Hello.

  Try to put in place a deskjet 3050 610 a in a wireless network. Printer works fine when connected to USB, but it fails with "Error_000057" when trying to print wireless.

  Router is a BT Home hub 2

  With the help of an acer laptop runing windows 7 32 bit, connected wireless to the router (and online)

  Printer is connected to the network, blue light turned on, the IP address displayed

  Have tried to disable the firewall (AVG)

  Tried to reinstall software

  Using the latest version (DJ3050_610_231) of the driver from the HP website

  Any ideas, anyone?

  Thanks in advance.

  Print a network from the front of the printer test.  If it is connected to your router?

  If so, your AVG is probably the issue.  Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

• How to increase the timeout of session for discoverer?

  Hi all:
  I try to change pref.txt and session time = 5400 but don't know why session time out is still only 8 min when running discovery. I would like to know how to increase the duration of the session for discoverer.
  
  
  
  
  
  Concerning
  Terry

  Terry,

  Follow the steps in the same document under the section "steps to change the timeout of Session discoverer".

  Thank you
  Hussein

• can the stage 2 audit be setup if I am located in Barbados? Having problems setting up keychain

  The Keychain can be put in place if I am located in Barbados which is the Caribbean?

  What you're trying to do with the keychain and what are you having problems?

• Get the Installation failed (-10) for Wireless LAN Driver on Samsung laptop running Windows 7 computer

  I tried to install the update of the driver wireless LAN appears so in SW updates on my Samsung laptop model number NP305E5A that is running Windows 7 (64-bit); and I keep getting error message-10 Installation failure.  I called Samsung and they distance access my computer and tried to install it via the SW update, as well as through websites; and it's the same thing; and they said I need to contact Microsoft as there seems to be some sort of bug on the side of the things Microsoft... Or otherwise I have to do a factory reset my laptop (which I will lose everything I have on my computer - not my first choice of solving this problem)

  The biggest problem with this is that it has disabled the wireless all together, and EVERY time I turn on my computer I have to go into my settings and activate my wireless, and no matter what I do the settings will not stay and I lose connectivity wireless at times.

  Please tell us what to do.

  Download the driver manually for the wireless adapter. (see instructions below)

  Restart in Mode safe mode and uninstall the driver via Device Manager.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Click Start, type: Device Manager

  Press enter on your keyboard

  Expand the network adapters

  Right-click in the map listed wireless, this must be a wireless network Broadcom based card

  Click on uninstall.

  Restart your computer in normal mode.

  Download driver driver for Wireless adapt.

  Go to http://www.samsung.com/us/support/owners/product/NP305E5A-A01US

  Scroll down to the driver tab, and then select your operating system and architecture:

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  

  After you have selected your architecture, scroll to the bottom of the page and you will see your driver listed:

  

  Scroll to the right click on the button to download the Zip

  

  Once downloaded, extract the zip file and then double-click the installer to begin the installation.

  Compress and decompress files ( filezip ) - Windows help

  Tips for fixing common driver problems - Windows help

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• How netflix strem by using blue-ray (ready for wireless lan) BD-P1600A/XAA samsung to my TV player?

  want help to learn how to stream Netflix to my Blu - ray player from samsung on my TV.  My blue-ray player is instant streaming available (wireless LAN ready) Samsung BD-P1600A/XAA. I also bought an adapter = Samsung model # WIS09ABGN. No matter what I do TV shows a message indicating an internet connection could not be found.  Help, please! Thank you, SEM.

  This does not appear to be linked to a network of Windows 7 problem, because it is not
  even a computer involved. Try http://forums.cnet.com/samsung-forum/ of support
  on interoperability and Samsung devices.
   
   
  Barb
   
   
  http://digitalmediaphile.com/
   
  Application Windows 8 Blog Reader of Barb connected world - http://apps.microsoft.com/windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461c-b1d5-06e54a58d298
   
  Please mark as answer if that answers your question
   
   
   
   

• I'm having problems setting my computer to a restore point

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• Having problems installing of software and drivers for HP Deskjet 9800

  I uninstalled my HP Deskjet 9800 because I have too many problems with it. I use Windows XP.  I went to hp.com and download the software and drivers for this printer. The software and drivers simply go to my folder of the downloaded files. How can I install this software for my printer work? Any help would be greatly appreciated. Thank you, Patricia

  The downloaded file is a .zip or .exe.  Go to your download folder (right click on start > explore, click the Folders icon and navigate to your folder) and then double-click the downloaded file.

  If it is a .zip file, it will create a folder.  Inside this folder is going to be a setup.exe file - double click on it.

  If it's a .exe file, double-clicking on it to launch the installer.

• Having problems setting up a 5.5 vCenter Server VM in a domain configuration...

  I'm trying to implement a vCenter Server VM (new installation, no upgrade) without an Active Directory domain that is available.  I was able to do this successfully in the past with 5.0 and 5.1, but now with 5.5 I have problems.

  Installing SSO works fine and displays warnings expected that the server is not on a domain and the certificate will be bound to the INVESTIGATION period.

  When I then try to run Setup from the inventory Service, it fails when you try to connect to the SSO:

  "Could not connect to vCenter Single Sign On.  Make sure that the Search Service URL points correctly to the vCenter Single Sign On the instance that you installed.  If vCenter Single Sign-On is installed with an IP address, make sure that the IP address is specified in the URL.

  5.0 and 5.1, in order to get this installation runs correctly, I would like to enter the IP address in the URL (as it says in the error), and he'd be fine.  So the address provided for the Research Service URL is https://< ip_address >: 7444/lookupservice/sdk

  I tried several variants for the fields of FULL domain name and URL of the Service search without success.

  Can someone confirm a successful for 5.5 off-field installation?  And if so, try to direct me in the right direction?

  I end up doing work, it turned out to be an order of operations issue.

  I tried to install SSO, then service inventory, then Web Service, then vcenter Server.  And on a domain, this order actually worked well.  For some reason any, when not on a domain, they must go SSO-> Web Service-> Service-> vCenter Server inventory (this command works in both scenarios, just to be clear).

• Having problems setting the objects in the page model

  After struggling with these days, I could use your help. I have a page that I need to make some minor adjustments object, I created. I want to center the clock flash under rotating photos and move it up so that it does not block the blue shadow. Also, I want to make "new skates and updates" box under a single box with framed left news. Whenever I try to make these adjustments, causes everything to move around. Any suggestions on fixing this would be appreciated.

  http://www.rideskat.org/index3.html

  Add immediately after

  This should solve your problem of alignment.

  In addition, the same line, you have a redundant . It is before. We do not use this markup now. Delete this.

  The color of the area 'subcontent ':

  In the CSS for #subcontent:

  Change this:

  {#subcontent}

  Clear: both;
  color: #FFF;
  overflow: hidden;
  background-image: url(#085AA4);
  }

  to do this:

  {#subcontent}

  Clear: both;
  color: #FFF;
  overflow: hidden;
  background: #085AA4;
  }

  Good luck.

  -ST

  EDIT: To request the withdrawal tag

• Value of timeout of session for PIA

  Hello
  where to see the value of Session Time Out, which has been implemented for the PIA?
  
  Two cases: Weblogic; WebSphere.
  
  Thank you.

  Hello:

  Session time-out information are configured on the Security tab on the configuration of web profile definition.

  Sameer.

• having problem setting textinput

  OK so here's the thing...

  I am currently trying to install a qnx text cursor as I need to have only the numbers being registration...

  I have install a cursor using the uicomponent and therefore, it is perfectly fine, but when you try to add the textinput, it does not appear!

  does anyone else have this problem? or did someone knows how to solve this?

  all this is in a mxml btw file

  WOW nvm I managed to do work... the really really really strange thing... I had to put its alpha = 1 and activated = true... which I never said than 0 or false anywhere... so im wondering how everything went... but anyway his works now!

• CS3: Having problems creating an Action to "save for Web".

  Hi all

  I am creating an Action to convert my psd. files to JPEG is suitable for the web.  I use a Mac Pro CS3 running.  My work space Adobe RGB (1998), all files start as Canon RAW CR2, are published in 16-bit and then saved as a psd.  I created an Action following an open psd. image in Photoshop:

  (1) Windows > Actions

  (2) create new Action

  (3) renamed 'save for Web' and then click on registration

  (4) image > duplicate > OK

  (5) Edition > convert to profile

  (6) changed Destination space sRGB IEC61966 - 2.1 > OK

  (7) file > save as

  (8) format > option JPEG no?  What?

  Everything seemed fine until I reached the stage of Format.  I had a lot of choices, but JPEG was not one of them.  Can someone please tell me what I'm doing wrong?  Thank you!

  Mike

  They must be 8 bits. But why do you use Save as instead of "save for web"?

• Envy of HP dv7-7332ea: having problems to install the driver of HP wireless button

  Hi all

  I would really appreciate some help here. Recently, I did a factory rest on my laptop dv7 HP Envy but can't reinstall Windows 10.

  Before doing this, I was told that I need updates of Windows 8 to 8.1, and then to Windows 10.

  However, I am unable to Al of Windows 8 to 8.1 Windows I'm not all the drivers installed.

  For some reason, I am unable to install the driver of HP wireless button. Whenever I try to download through Windows Update in Control Panel, it downloads and after installation displays an error code 80070436.

  I am unable to get this driver installed and therefore cannot be updated to Windows 8.1. I tried to update to 8.1 without the driver, but my laptop is restarted it got stuck at 82%.

  I would be grateful if someone could give me some advice or help get this sort I seem to keep hitting a brick wall.

  Thank you very much

  Ian :-)

  You are the very welcome.

  You will be able to install W10 directly without the need to spend any other OS.

  I did it several times already, so I know it works.

  Twice on nine discs in a solid state on laptops that had previously been W10 on the old mechanical hard disks.

• Problem with Internet access: local only for wireless in Vista

  Help, please.  I have a Dell laptop and a Dell desktop computer.  The other day, I pressed WPS on my router Netgear wireless, and since then, my desktop computer (Windows Vista Home Premium SP2) was not able to connect to the Internet.  The office is connected to my router.  My Dell (Win 7 Pro) laptop is able to connect wirelessly to the router and Internet.

  That's what I tried:
  (1) I bought a new wireless router Netgear WNDR4500
  (2) I bought a cutting mini USB wifi adapter for the desktop.  Install the driver.
  (3) reset winsock, ipv4, ipv6, dns
  -netsh int ip reset reset.log
  -netsh winsock reset catalog

  ipconfig/flushdns

  (4) order McAfee firewall
  (5) restarted several times
  (6) persons with disabilities wired and wireless enabled - I get signal green/fort
  (7) off active and wired wireless
  None of the above seem to work.  I keep getting 'Access to local only' on both cables and wireless.  When I ping yahoo.com, I get no response.
  My laptop, however, works very well in the connection to the wireless router and also to the Internet.
  Anything else I can try?  Help, please!
  KT

  Hello

  Thanks for sharing the information valid.

  In case, if you need help, you can always post your questions as well as your valuable suggestions in this forum.