Having problems to open an excel file to add information to it.

Similar Questions

• Problem to open a single file

  Hello

  Im having problem to open a file, I used the component Open/create/replace file.vi to try to create a folder, but does not work. When I put the path as C:\Registros way, where looking does not exist, the component create a .dat with this name (Registros.dat) =...

  Can someone help me with this?

  THX =)

  Hi not know wha...

  the function "create a folder" must exist in LV6.0. See this link:

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=52455&requireLogin=false

  If the folder 'reg...' does not exist, then you create everything first. You don't need to open a file, you only need to use a path to select the folder where you want to create a folder or a file, but all records of the path must exist.

  Mike

• Whenever I open an Excel file, I get a pop for Windows Installer

  Original title: Windows Installer

  Every time I open an existing Excel file, Windows Installer opens first, there is a significant delay and opens the Excel file. What is the solution to get out of the process of opening Excel from Windows Installer files? I don't see Windows Setup in the control panel so I can't remove it.

  Thank you

  Hi Phil,

  Windows Installer tries to configure excel on your system.

  Click Start-> settings-> Control Panel-> Add/Remove Programs-> Microsoft office-> change-> add/remove component-> select excel, then click on run from my computer.

  Once its finished installation-> start excel from start-> programs-> excel (or in Microsoft office-> Excel).

  Let the full installation. Close excel and open your files.

  I hope this helps.

• I've just updated to version 4 of ADE and now I'm having problems to open the books of examination of NetGalley

  I've just updated to version 4 of ADE and now I'm having problems to open the books of NetGalley review on it. I didn't have this problem before and now I get a message that says "permit to make mistake. "License Server Communication problem: E_AUTH_BAD_DEVICE_KEY_OR_PKCS12 ' I really need this resolved as soon as POSSIBLE that my comments have a date limit.

  

  For this problem, you must Deauthorize and reauthorize the ADAM.

  Follow the steps below: (note you must know your current permission user id and password)

  Windows:

  Click Start > run.

  Open, type regedit in the text box and press ENTER. The Registry Editor opens.

  In the left pane of the registry editor, find the following registry key:

  HKEY_CURRENT_USER\Software\Adobe\Adept

  Right click on the key to the follower, and then choose Remove.

  In the dialog box confirm the key deletion, click OK.

  Your permission is removed.

  ADE will be cancelled now.

  Now allow ADE new.

• iPhone user needs to know if this app will allow to consider when opening the files fill in pdf.  At this point, the iphone opens the pdf file, but the information that the sender had typed in are not visible.  If we opt for a pc, the info typed in is e

  opps, I put everything in the title line... no match came...

  This app allows to be consulted at the opening of the filled pdf files?

  At this point, the iphone opens the pdf file, but the information that the sender had typed in are not visible.  If we opt for a pc, the info typed in is here.  We believe that we need a viewer that will recognize the data inserted / under the direction of the sender. Made for mobile DC cela?

  Hello

  Yes, the Adobe Acrobat Reader for iOS on iPad/iPhone to view PDF Forms.

  The problem is that the preview PDF Apple does not make data from completed forms and annotations (Sticky Notes, point climax, drawing freehand, etc.).

  When you open a PDF document in an application (Mail, Safari, iBooks) Apple iOS, please make sure you use the feature of "open in" iOS to open it in Acrobat Reader for iOS.

  Please take a look at the following documents of the FAQ.

  • For iPad, see How to open PDF documents in Adobe Acrobat DC for iOS (iPad version)
  • For iPhone, see How to open PDF documents in Adobe Acrobat DC for iOS (iPhone version)

  Please let us know if you have any additional questions.

• Opening PowerPoint & Excel files

  I recently bought the a Satellite from Toshiba with Windows 7 Home Premium 64 bit and Mircosoft Office 2010.
  When I try and open a PowerPoint or excel system file don't not overlay the files and request a file to select. Unfortunately, the system seems stuck when I select powerpoint/excel and the file does not open. Word works without problem.
  I can open the excel/powerpoint files if I open the program first, and then select the file.
  Is this normal?

  Somehow, it isn't normal, but I put t know how to help you with this and I don t see a report any with Toshiba.

  Try to discuss on this topic on the forum of the Office. I sure you will find some tips of God he m.

  Check http://www.msofficeforums.com/

• Problems to open the PDF files created on a PC on a MAC

  Hello

  Im having issues when I PDF a Word from the Microsoft Office 2010 document. When I opened the pdf file after that is very well and when I send email to other users of PC, it is fine. The problem arises when I send the PDF file to a MAC user and they view the file. The text becomes black lines. The lines are also still visible when they print the document.  I'm using acrobat 9 pro. Anyone know how to fix this?

  Thanks for your help

  I was converting a doc MS word to PDF 2010.  I think I found a good solution.  When you save the PDF file, I chose the 'options' and check the box under PDF options for "ISO 19005-1 compliant (PDF/A).  I tried to access this file last updated from my iPad and is no longer the text displayed as black lines.  He did, however, increase the size of the file a little... I think it's due to embedding the fonts?  In any case, it seems to work now :-)

• Download and open the Excel files on iPad Pro

  I have the new iPad Pro.  I have Office 365 is installed.  In my work, I run queries of data on a server and the query result comes to me in Excel.  I want to download the Excel file and open it for editing on my iPad Pro.  What I have actually / to accomplish this task?

  You should be able to do this by using numbers

  

  https://www.Apple.com/ca/support/iWork-for-icloud/numbers/

• problem by opening the Zip file

  I have 8.0 Zip when I create a zip file and open the zip file all show but open in notped.

  The possible Zip files were dissasociated and rather associated with Notepad.  Go to start / Default programs / high a file or program with a Protocol / and go to .zip files.  It shows probably associated with Notepad.  Go to the following link: http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and select the zip file option file and run it to reset the association of zip files.

  If this does not work, install 7-Zip http://www.7-zip.org/ one good program free Zip.  This should establish associate files with 7-Zip Zip (OK this action if requested).  Then, use 7 - Zip to open the Zip file.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem with cfspreadsheet and excel files

  Hello

  I have a request from a client to generate a worksheet excel from a query. I have the query expel the fields and I can generate the Excel without a hitch. The problem comes when the customer takes excel file and then tries to handle it. The majority of the distress comes from fields that must be marked as currency or dates. I am, with a few combat capable of generating a 'real' date field Before this Excel was not correctly sort dates.

  I was able to call an excel formula using this:

  < cfset SpreadsheetSetCellFormula (, "DATEVALUE (#Chr (34) #Replacement_ETD ##Chr (34) #)", therow, 9) >

  Date value Force Excel to recognize him as a real date field. However, this fails when this file is manipulated by excel. The next problem is the currency field. I can't get excel to recognize it as a currency. It's always personal. When it is set, the SUM function will not work in excel. You can add the fields individually as A1 + B1 + C1 = TOTAL. This will not help when there are 200 lines.

  I was able to get a suggestion from an other CF developer who has had a similar situation. He generated the first with the appropriate items excel file and set the columns to their fields such as date and currency, etc.

  The next step would be to fill the rank by rank, and they must be properly formatted.

  Code:

  ("< cfset expandPath("./reports/arrivals.xlsx = filename ") >

  < cfspreadsheet action = "read" src = "#filename #" name = "s" >

  < cfset therow = 0 >

  < cfoutput query = "myExcel" StartRowOptional = "1" >

  < cfset therow = myExcel.currentrow + 1 >

  < cfset SpreadsheetSetCellValue (holders, s, therow, 1) >

  < cfset SpreadsheetSetCellValue (s, Section, therow, 2) >

  < cfset SpreadsheetSetCellValue (s, Position_Number, therow, 3) >

  < cfset SpreadsheetSetCellValue (s, Position_Title, therow, 4) >

  < cfset SpreadsheetSetCellValue (s, Incumbent_Emplyment_Type, therow, 5) >

  < cfset SpreadsheetSetCellValue (s, Incumbent_ETD, therow, 6) >

  < cfset SpreadsheetSetCellValue (s, Tour_Comments, therow, 7) >

  < cfset SpreadsheetSetCellValue (s, replacement, therow, 8) >

  < cfset SpreadsheetSetCellValue (s, Replacement_ETA, therow, 9) >

  < / cfoutput >

  < name cfheader = "content-disposition" value = "attachment; filename = Departures_ (#DateFormat (now (), 'MMDDYY') #) .xls ">"

  < cfcontent type = "application/msexcel" variable = "#spreadsheetReadBinary (s)" # "reset ="true">"

  The data in the cells has already been formatted properly. When this file is generated and sent to the user columns are not formatted as expected.

  Does anyone know if this method will work or have a better suggestion on CF getting to generate a suitable date and currency field to Excel for acknowledge?

  Adobe ColdFusion running on RHEL 5 v10

  Thank you

  For some reason, you need to format it twice - once before the data is inserted and one after.

  This is especially true if you have data values that are integers.  These, even if you format cell advance to be 'Text', always align to the right, as do the integers.  However, if you reapply the formatting after inserting the data, then it must be formatted correctly.

  HTH,

  ^_^

  PS. Thank YOU for taking the time to code for spreadsheetsetcellvalue (CF)!  Too many people become lazy and chuck just a query to an object tag cfspreadsheet.

• problem in import of excel file

  Hi Experts...
  
  I'm new in odi 11g.
  
  I created the system Dsn for the Excel driver.
  I created a physical and logical schema in Microsoft Excel technology and new model Excel file.
  But when I click on bone to import Excel files, it works, but the Excel files are not imported.
  
  
  Please help me with this, it's urgent.
  
  Thank you
  
  Published by: 906322 on March 7, 2012 07:26

  Hey, take a look at this document.
  https://blogs.Oracle.com/dataintegration/entry/connecting_to_microsoft_excel
  Thanks in advance to Julien (he is the author of the document)

  This was really helpful when I did!

  Let me know if you got a problem with it.

  Best regards.

  J

  Published by: J_ORCL on March 7, 2012 08:50

• Beginner with problems to open the RAW files.

  I am new to the use of RAW files.  I started by following the instructions to download and install the new plugin RAW for my version of photoshop CS2.  When I open CS2 and choose the bridge, I see the thumbnail of the NEF file, but when I right click to open, there is no option for me to open as RAW file.  If I double left click to open, it tells me that it can't open because it's the wrong type of file.

  Photoshop CS2 9.0 worm

  Raw plugin Ver 3.7

  Nikon D5000 camera

  Hi Jonah1972,

  You can also use the 7.2 dng converter to convert the files D5000 dng copies which should then open in bridge or cs2.

  Windows:

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5486

  Mac:

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5485

• Having problems to open the IDML CS5 file

  Hello world

  Can someone offer some assistance?

  My colleague is on CS5.5 and I'm on CS5. She created a file IDML of a document, that we are working and I tried to open it. However, when you open the it, it freezes at the same point each time. (when importing links) The only way I can get out of InDesign is via the Task Manager. Any help would be appreciated.

  Chris.

  About 15 minutes, but it opens in CS4 as well. Just be patient - get a cup of coffee or check your Facebook page or soomething.

• Having problems with signature of a file flash swf for Whiteboard Tower Defense

  I presented the Whiteboard Tower Defense game well before March 15. Apparently, I have problems he signed. The process runs, ends and I submitted it, but I thought it was supposed to generate a lot of files more than what he has done. I sent applications for blackberry app world, and after several days, I was told to email of support to development. It's two weeks since I sent dev support and all I got was an automatic reply telling me that my case number is INC000022756153. According to my email of rejection that I had to have the files:-RDK. SF - RDK. EC - MANIFEST. MF - AURTHOR. SF - AUTHOR. EC, I tried several times now to sign my application. I do not get the additional files below. I start with: customer-RDK - 3571298317.csj playbookkey.p12 blackberry - tablet.xml WTD_icon.png WTD_splash.png whiteboardTD_PB - app.xml whiteboardTD_PB.swf the only output I get is a file named "BAR5971919570144853211.tmp" and the .bar file. Orders that I run are: "C:\Program Files (x 86) \Adobe\Adobe Flash Builder 4.5\sdks\blackberry-tablet-sdk-0.9.3\bin\blackberry-airpackager" - package whiteboard.bar - josh - installApp-device 192.168.132.128 password - launchApp whiteboardTD_PB - app.xml whiteboardTD_PB.swf blackberry - tablet.xml WTD_splash.png WTD_icon.png "C:\Program Files (x 86) \Adobe\Adobe Flash Builder 4.5\sdks\blackberry-tablet-sdk-0.9.3\bin\blackberry-signer"--verbose - cskpass mypassword1 - "C:\PB\playbookkey.p12" keystore - storepass mypassword2 "C:\PB\Whiteboard TD\whiteboard.bar" RDK what stage should create additional files listed? And since getting help on this took so long, does that mean that I am more qualified to receive a playbook for free even if I got my app presented early? Josh.

  It's quite unreadable, plase use the Insert button Code to paste the code, so you could read something like this:

  "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\blackberry-tablet-sdk-0.9.3\bin\blackberry-airpackager" -package whiteboard.bar -password josh -installApp -device 192.168.132.128 -launchApp whiteboardTD_PB-app.xml whiteboardTD_PB.swf blackberry-tablet.xml WTD_splash.png WTD_icon.png
  

  After you run the previous step, you should have the whiteboard.bar. If you open this file with WinRar .bar, you will see the META-INF files and the air. META-INF will contain only MANIFEST. MF

  Next step would be

  "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\blackberry-tablet-sdk-0.9.3\bin\blackberry-signer" -verbose -cskpass mypassword1 -keystore "C:\PB\playbookkey.p12" -storepass mypassword2 "C:\PB\Whiteboard TD\whiteboard.bar" RDK
  

  After this stage the META-INF folder must contain two files add - RDK. SF - RDK. EC

  And one last step (to sign as an author)

  "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\blackberry-tablet-sdk-0.9.3\bin\blackberry-signer" -keystore "C:\PB\playbookkey.p12" -storepass mypassword2 "C:\PB\Whiteboard TD\whiteboard.bar" author
  

  After this step the file META-INF must contain even two files add - AURTHOR. SF - AUTHOR. EC

  And you're good to go

• BlackBerry Smartphones opening Word / Excel files stored on the media card

  I just got my BB Bold 9700 last week. I used the BB Desktop manager to copy Word and Excel documents from my laptop to the card media on my 9700. Worked very well; However, when I try to open them on the 9700, I get the following message:

  When you enter a remote share: //host/share at least, possibly add [/ file [/ file...]] [filename]

  Could someone please show me an example of what they mean and how to do it?

  austinxw wrote:

  I'm new to all of this, what is BES?

  BES = Blackberry Enterprise Solution - a server, hosted within a firm, that provides a conduit between the company (for example, Exchange, Notes) messaging system and the BB belonging to the company.