HD pro does not start

Hi and sorry for my bad English
Sometimes HD pro does not connect properly and I have to remove the battery so that it restarts correctly.

Thank you for your help
Dav74

Hello, my friend

HD Pro? You write about Toshiba Camelio Pro HD?

Tags: Toshiba

Similar Questions

  • MacBook Pro does not start, the screen is pixelated.

    MacBook Pro (2011) running iOS later.

    Screen went blue, at which time mac was turned off.  Try to be able to save and mac does not start.

    Tried to boot using utilities, but can not access this screen.  (the screen is also all the "pixelated".)

    Looking for ideas before making a trip to the Apple store.

    1 disconnect all devices (Ethernet, USB, external hard drives, mouse)

    2. start in safe mode

    3. go Finder - press Option-Go - ~/Library/ /DiagnosticReports ofnewspapers

    4. find the missing table inception report and post it please

    If your Mac will not turn on - Apple Support

  • MacBook Pro does not start safe mode or recovery mode without start up

    I use my MacBook Pro almost daily for several months now, and all of a sudden I stopped and start it up to a kernel panic (so it seems) who never lets me start normally, safe mode is a nothing helps. Recovery mode does not start, and when I try to use an external drive usb in the selection of drive it will appear. I don't know what to do more and I'm stuck. I'm not able to get in all the menus, so all I have is these pictures of panic before it restarts. Post picture soon submit iPhone photo.

  • MacBook Pro does not start. Tried a lot of things, but no luck. Ideas?

    MacBook Pro mid 2012 does not start. Getting the various screens of gray. When trying to make right boot, get flashing folder.

    Other things does not: recovery of OS X, without failure, verbose mode, Boot Manager, single-user mode. IRA to the re-establishment of the Internet, enter the password, stall (error - 2002F-).

    Tried to reset the memory NVRAM and SMC, but nothing.

    Tried with the new hard drive, but accurate results same with the old hard drive (I thought that the old hard drive can be damaged, so got a new one, but get the same results).

    Any ideas? Could go to the Apple service center, but closer to here where I am is 3 hours away.

    Should note that there are many attempts Mac starts up fine (by divine intervention I think), so saved all all on, but after computer use as usual for an hour (especially Internet browsing using Safari and Chrome), computer slowed to snail pace, so tried to restart but still got results above.

    Any help or ideas greatly appreciated. Thank you!

    Hi Sevensmallwoods:

    Replace the drive SATA cable. https://www.iFixit.com/store/Mac/MacBook-Pro-13-inch-unibody-mid-2012-hard-drive - Cable/IF163-041-1

    Here is a guide on how to replace it. the https://www.iFixit.com/Guide/MacBook+Pro+13-inch+unibody+Mid+2012+Hard+Drive+CAB + replacement/10379

    Here is a video to show you how it fails. https://www.YouTube.com/watch?v=Amg5w0rlwDo

  • Tablet Dell coming 8 Pro does not start

    Hello

    The Tablet is only about a year. And I've kept it's safe and sound, no damages or drops. Nothing.

    But yesterday morning when I got it, he went to sea and no matter what I do, it does not start!

    I press and hold the start buttong. Nada. I even press the windows key or was desperate enough to press the volume even toggles!

    I thought that maybe the load isn't enough. So I let it charge overnight. Still nothing.

    He used to have a small problem before that sometimes he used to take a few minutes to actually boot (startup). But it's random and many times, it was when an update has been installed. But not always.

    But this time, he stayed off the coast and after more than 24 hours, does not illuminate!

    What should I do?

    Thank you

    I think just, I solved this problem. Make absolutely certain that you are using the supplied with your coming Pro USB wall wart, similar and ordinary phone chargers don't work reliably and sometimes not at all! There will be a sticker on the side of her windows. The Pro should need more energy than what is normally fed by normal phone chargers. I hope this helps!

    Also, I think that light orange/red momentary while that push the power button is actually an indicator of battery flat (as crazy as it sounds). These types of batteries are supposed to be completely empty as it will ruin their fast enough, so they are designed to power off with a few charges left to protect themselves to be completely discharged.

  • Windows 8 Pro does not start after windows update updates for April

    Hello

    Pulled up to my PC this morning and was asked to install updates from windows update. Check the list, there are 11 important available updates. I have unchecked and hiding implementing Nvidia updated as I want to do the updates of my GPU myself. Installed the remaining 10, completed and has been asked to restart my PC.

    The problems starts here; I am more able to start windows.

    It is past the bios screen, shows the blue flag with a circle of rotation below and then... nothing more than a black screen and my screen goes to mode 'sleep'.

    I tried to start in safe mode minimum clean using a prompt (bcdedit/set {default} safeboot) repair my installation disk option, but it does not start even in safe mode.

    I run system restore turned on so that the option is not valid for me.

    The system is now check the disk for errors, but it seems to hang there as well as happens for more than 2 hours now...

    Any way that I can return the updates of windows on the outside? Any other suggestions than the reset of the installation disc?

    Spec: Evga x 58 classified 3, Intel Core i7 950, 2 x Geforce GTX 580 in SLI, 12 GB Corsair Dominator GT DDR3, Corsair Force 3 SSD 128 gb, Dell u2711 2560 x 1440. Win Pro 8 x 64, completely up to date with the latest drivers. PC worked perfectly up to this Point.

    Disappointed that the "major updates" Microsoft kills my work machine.

    Problem solved now and it was the update of KB2808735 who was / is the origin of the problem.

    I placed my SSD into another computer and was able to pull up in SafeMode off and remove the updates.

    Installed all the updates one by one until it chrashed again installing the update mentioned above.

  • the premier pro does not start in windows 10

    Hello

    I have just updated to windows install 10 with a cleaning. Now, I have a problem with the Premier Pro cs5.5. It does not start correctly.  instead of the projection of the screen it goes to an empty p [the age with the bar tools, then falls, disappears. I was wondering if I have to do a re-install or there may be an update to make it compatible to windows 10.

    In addition to the comments of John, a few people with a new Adobe DVA are struggling to get them to open in Win10 but found that by double-clicking the program file, the Properties section and choose "run as Administrator", they had to operate. That said... Win10 and a number of video applications are not on the excellent conditions in any universal sense.

    Neil

  • MacBook Pro does not start

    I have tried several things but the laptop won't start do not. Power cable showing green light as if the laptop is fully charged. It's like the death does not start.

    Try resetting the SMC

    Reset the management system (SCM) controller on your Mac - Apple Support

    You said "It's like death does not start."

    Does this mean that he shows no signs of life? Indicator light power?

    Hear the carillon?

    Hear the fans?

  • Lenovo Vibe Z2 Pro Does not start

    Hello

    My lenovo vibe z2 does not start. It was working well before go to bed last night, but when I woke up it was off and I am unable to turn it on. I tried to load it first in case the battery is down, but after 30 minutes of charge it still won't start. Does not blink in all cases. I tired to press volume top + power to try to reset hard.

    It's as if he died.

    What can I do?

    Hello

    Thank you for your response.
    I used the original charger. Nothing has worked. I couldn't even the screen.

    I sent for service, received back it in 10 business days.

    FIX: The motherboard has been replaced under warranty.

  • How to repair Mac Pro does not start

    MY Mac Pro when they start up Logo right, Apple may see

    Hi jorge, this is a topic of Apple Support on what to do if your Mac does not illuminate.

    https://support.Apple.com/en-us/HT204267

    If you have another Mac, you can try to boot in target disk Mode and make a backup of your files.

    Share files between two computers with target - Apple Support disk mode

    Then you can try following the advice of this user tip

    .. Step by step to fix your Mac

    Another possibility is trying to boot now the command option + keys r to your recovery volume. If it works, re - install OS X on the internet. https://support.Apple.com/en-us/HT201314

  • My MacBook Pro does not start all of a sudden upward

    Hello

    I turned my MacBook Pro yesterday and when I went to start it up again today, I pushed the powerbutton comes the startup sound and clear grey screen with an Apple comes up with a progressbar under. about a cm from the bar gets full and then a code appears on the screen for a few seconds, then the computer tries again to restart and it circulates in a loop. I took a photo of the code that is displayed for a few seconds and attached to it.

    What should do?

    I have timemachine copies the MacBook on my TimeCapsule, but I have no idea how to use when the computer refuses to start.

    Try:

    Try these in order to test your system after each see if it is back to normal:

    1. a. reset the PRAM and NVRAM on your Mac.

    b. Macs with Intel processors: reset of the controller (SMC) system management

    2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

    HD recovery start: restart the computer after the ring, press on and hold the

    COMMAND and R keys until it appears the Utilities menu screen. You can also restart the

    computer and after the ringing, press and hold down the OPTION key until the Boot Manager

    the screen appears. Select the Recovery HD and click on the arrow pointing down.

    3 fix the hard disk and permissions: at startup, select drive in the Utilities menu utility. Repair hard disk and permissions as follows.

    When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

    4 reinstall the 10.10.5 update: OS X Yosemite 10.10.5 Combo Update.

    5 reinstall OS X: Reboot of HD recovery Select reinstall OS X in the Utilities menu, then click on the continue button.

         Reinstall the 10.10.5 Update: OS X Yosemite 10.10.5 Combo update, if necessary.

    Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

  • HP 3500 Pro does not start on Windows

    Hello

    I have a HP Pro desktop computer which worked great, recently, he started do not start windows. The HP splash screen come after that I get the black screen "Windows Error Recovery, Windows couldn't start. A recent hardware or software change might be the cause.
    I tried to start windows normally, safe mode, running all diagnostics and repair and none of it worked. I tried also to the redefinition of the machine at least 3 times and I still got the message and will not be able to start Windows. I took on the memory, the processor, the cd drive and swap the drive with another HP Office work and I always get the message and it does not always boot to windows. I worked on about 50 of them, and this is the first time I came across this question.

    Can someone help me with this problem?

    Thank you.

    Data sheet:
    HP 3500 Pro series
    CPU: Intel i5-3470 processor 3.2 GHz
    Memory: 4 GB
    Hard drive: 500 GB Toshiba
    CD-ROM: HP
    OS: Windows 7

    Also, I can get the bios very well.

    TheOldMan thanks for your help. I had thought about it, for some reason the bios has been changed. I have everything set to default values, and now I'm able to start Windows without error messages or problems.

  • WINDOWS 8 PRO DOES NOT START AFTER UPGRADING THE BIOS

    ACER Aspire 4730z

    I just updated my BIOS version. And after the easy upgrade restarted my laptop. And boom. My Win8 is not start now... help me :((

    Hello

    You will need to maybe get into your bios and restore the order of boot device... You would think that would be already fixed properly, but sometimes it isn't.

  • Yoga 2 Pro does not start disk hard undetected

    Can someone help me solve this problem? Or guide me how to solve?

    I bought yoga 2 pro in Malaysia three weeks back. And I had traveled in India last week. The PC was working fine until yesterday. Yesterday while I was working all of a sudden, the system hangs and I had to hard reset. But after the system starts. It shows the found boot device. I turned off and tried to start the button restore and open the bios, it shows that the HARD drive is not detected.

    Same type of question I did face twice before, but if I hard start it again, it worked fine.

    Now, the hunt begins. I got this PC near centre of Lenovo. He said you do not have to make here and gave me the number of customer support. I called and gave the serial number and given all the necessary information, they asked. Then they said that its service line product and premium premium is enabled for me. I was happy to hear that, and he asked me to hold for two minutes. I waited on the line. When he said this product not supported in India and I must remind the Malaysia and gave me toll free 1800-22-0116. When I try to call that number, he said that there is no such number.
    Once the centre of Lenovo in charge told me if I pay they can use my PC here.
    After awhile, I got a call from Lenovo tech support Bangalore saying that my PC is not supported by the Lenovo India and if they want to resolve what I have to pay for it.
    When I buy the product that I checked in the shop, they said its in warranty international.
    That means international warranty? If Lenovo can fix the PC if I pay. Why they can't fix the when my PC is under warranty? It is just a month old PC. Purely of hardware failure. Not a bad manipulation.
    Am on trip in my business trip and am not able to use my PC for two days now. Lose business here. Technical support should help the customer to correct the problem. Do not deprive us.
    Can someone help me? Is there anyway that I can get this fixed number in India. I must travel to the Cayman Islands in another 10 days.
    Will be my request reache lenovo?

    I had to send the laptop to the Malaysia through my friend for the service and got the replaced HDD/SSD. Now, works great.

  • Windows 7 Pro does not start.

    When starting my computer, I get the usual BACK info and BIOS works properly.  Now the problem.  All I get on the screen after the BIOS works is these words:

    "No bootable device - insert boot disk and press any key".

    What boot device?  I don't have a CD or a bootable floppy disk for WIN 7 and have not heard of one being available.

    I've been running this machine for months with no probs.  I did an update to a program called System Mechanic.  I have to get back on but still out of habit.

    I am running WIN 7 Pro. I have two hard drives.  A 320 GB and 500 GB.  Both are Seagates SATA. One is for the OS and the other to store the data.

    The two HD display correctly in the BIOS...

    It's the end of it.  Unable to get any further.

    Help, please.  Send suggestions.  I KNOW that the two HD did not fail at the same instant.

    Hello

    Looks like you need a computer store real (no leeks and glances at a Best Buy or any other
    Big box stores).

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Maybe you are looking for