HDD and dvd are not recognized in the configuration menu, what could be the problem?

The hard drive and dvd drive are not recognized on the configuration menu for my desktop Pavilion a4316f.  What is a controller failure?  A PCI controller can be used to replace the motherboard controller?

dhobs,

Anguish, that the suffering of the faulty motherboard has been aggravated by your actions. Why you decided to perform a restore (which re - formate the disk, erase all your data files (documents, photos, videos to misic,) is really amazing.)

You had a viable BONE, work and the data store. You he clobbered with recovery. As explained, the 'tattoo' reads the embedded hardware configuration and will stop at the resumption of treatment if it detects a change.

Only temporary help I can offer is to open the computer case and install a small 12v on the NVidia chip fan. IF the chip is not 100% burned, you can earn low enough time to reinstall the operating system and then add the map.

Tags: HP Desktops

Similar Questions

  • I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightr

    I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightroom" I have the most updated version, I think as 5.7.  What should I do to get these files imported as raw files?

    Hi Bobsirkus,

    The camera you have is compatible with the latest version of Lightroom, which is Lightroom 6/CC.

    Please see the list of the camera supported by Lightroom: supported by Adobe Camera Raw devices

    You can use the DNG Converter, converts images and then import them into DNG in Lightroom.

    Kind regards

    Tanuj

  • I recently bought a Canon 5 d camera SR and when I imported the photos taken in Lightroom RAW gave me the following message: "files are not recognized by the RAW format support in Lightroom (73)" what should I do?

    I recently bought a Canon 5 d camera SR and when I imported the photos taken in RAW, Lightroom gave me the following message: "files are not recognized by the inLightroom of support for the RAW format (73)" what should I do?

    Hello

    Looks like you may not have the latest version of Lightroom as the Canon 5 d R raw files are supported in Lightroom 6.0 and above (not in previous versions)

    Devices supported by Camera Raw

  • CD and DVD is not recognized

    my pc hp in my computer does not display my CD-ROM/dvd-rom and with my CD and DVD are not recognize... .will help

    I don't know how it happens but my computer shows no dvd/cd rom section and with which the CD and the DVD does not play on my computer hp laptop

    Hello michelleruth27,

    If the CD/DVD drive is missing from your computer, I suggest you run by following the below Fix - it. This will automatically diagnose and repair problems with your CD or DVD drive when trying to read or burn media:

    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    If this does not resolve the problem, you can try to do these steps manually.

    1. click on start this image and then click on all programs.

    2. click on accessories and then click Run.

    3 type regedit, and then click OK, if you are prompted for an administrator password or a confirmation, type the password or click on allow.

    In the navigation pane, find and then click the following registry subkey:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    4. in the right pane, click UpperFilters.

    Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 8.

    5. on the Edit menu, click on delete.

    6. When you are prompted to confirm the deletion, click Yes.

    7. in the right pane, click LowerFilters.

    Note If you do not see the LowerFilters registry entry, unfortunately this content cannot help you. Go to the section "Next steps" to learn how you can find more solutions or more help on the Microsoft Web site.

    8. in the Edit menu, click on delete.

    9. When you are prompted to confirm the deletion, click Yes.

    10. exit the registry editor.

    11. restart the computer.

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows.

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

  • I get this message your Skype name and password are not recognized what should I do

    original title: Skype
    I get this message your Skype name and password are not recognized what should I do

    Look at the Sticky Thread at the top of this page.
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/where-do-i-get-Skype-support/3ae98b5e-566c-4D8C-B189-37b50e475539

  • New camera.  LR. Don't let me import the photos in the new camera.   Get the following message: some import operations have not been executed.  The files are not recognized by the raw format support in Lightroom...  Application of point 4.4 of Lightroom. 

    L.R., I cannot import the photo of the new camera.   Get the following message: "some files are not recognized by the raw format support in Lightroom."  Click below to view a version update of Lightroom.   Done this and updated Lightroom 4.4.   Still cannot import - get the same message.

    Devices supported by Adobe Camera Raw

    The D610 requires LR version 5.3 or newer.

    If you don't want to upgrade, you can download the current DNG Converter and convert the NEF files to DNG before importing the DNG files.

  • How the D610 Nikon raw files can be imported into Lightroom 4.4? The files are not recognized by the raw format support in Lightroom

    I bought a nikon d610, when I tried to import raw files in the same way that I had always done with my old nikon d80 before I could not. I got a message saying that the files are not recognized by the raw format support in Lightroom. I also tried with photoshop cc and I couldn't either. Any suggestions?

    Camera Raw plugin | Supported devices

    The D610 was first supported by Lightroom 5.3.

    You will have to pay to

    1. Lightroom 6 upgrade, or
    2. Join the cloud, or
    3. Download the free Adobe DNG converter, convert all the D610 Raw files to DNG, and then edit the DNG in Lightroom 4.4
      Digital Negative (DNG)
  • Could not import the Nikon D800 with Lightroom 5.6 - files are not recognized by the raw format support in Lightroom

    I got CS3 installed and installed LR 5.5 and I tried to import my D800 NEF files and got the below error.

    I then installed 5.6 and tried again and got the same error

    I then uninstalled CS3 and LR and CS3, LR data directories and camera raw dir in the directory my profile app and reinstalled 5.6

    I still get the error. I just bought LR because I realized, that it supported the D800 from a 4.x version.

    Error:

    The files are not recognized by the raw format support in Lightroom

    JimHess wrote:

    You don't want to use Nikon Transfer! It corrupts files so that Lightroom can not read them. But here is a link to a utility that will repair the files. I have never used, only seen it recommended.

    Difficulty of the corrupted Nikon NEF Images

    In the future, I strongly suggest that you just use Lightroom to import your images. It works well. There is no need whatsoever to use Nikon Transfer. Is there any reason not to use.

    No problem with Nikon Transfer, providing you up-to-date on a regular basis. It is part of NikonViewNX2 which is regularly updated to include new Nikon cameras. Update of Nikon will notify you of new updates. I use to transfer files nave of cameras D70, D100, D200, D300, D3, D700, D7000, D7100, D800 and D800E as I had them for years. I like it because it of fast, allows me to include copyright data and profile data he copies, and it will also rename it if you wish. They are then ready to be imported into LR.

    My advice is NEVER use the import of LRs. IME process it has never worked well, even when the update.

    Bob Frost

  • I can convert pdf to word format adobe acrobat, DC but my version of word is not correct because after conversion, fonts and lines are not correct in the original pdf document.  I am currently using version 6.1 of windows 7 service pack 1 build 7601. Is -

    I can convert pdf to word format adobe acrobat, DC, but my version of word may not be correct because after conversion, fonts and lines are not correct in the original pdf document.  I'm currently using version 6.1 of windows 7 service pack 1 build 7601 Home Premium. Is it possible that I might have to upgrade my windows 7 in order to get good conversions of PDF files in word files?

    No, it won't be linked to your version of Windows. Probably, you wait too long. Conversion cannot be perfect except for the files very easy.

  • sides and prognoses are not shown in the images of the film, although that marked in the LR presets. Who can help?

    sides and prognoses are not shown in the images of the film, although that marked in the LR presets. Who can help?

    found the solution: the film was small!

  • Satellite M70: DL - DVD are not recognized on Pioneer DVR-K16S

    My DVD player does not recognize DL media (this device is compatible DL) so I can't burn this type of DVD, that someone can tell me why? all other media CD and DVD works great. I can write and read, but with DL, I can't write because this type of media are not recognized. I tried to find information and driver and firmware on the internet, but I can't find note on DVR-K16s pilot.

    I have a satellite M70

    Best regards.

    Hello

    According to the specifications of the Satellite M70, it should be possible to burn the DL DVD.
    It's not easy to say why you can't burn your DL media.
    You know that not all readers to support all of the CD and DVD.
    A friend of mine tried to use DL media. There were also some problems with another drive.
    I recommend that you test some DL media.

  • DVD player not recognized after the upgrade to windows 8

    I write this to document some odd behavior, that I lived after the upgrade to Windows 8 in the hope that it might save some grief for others.  Of course, if someone could explain why this problem occurs, I'd be very interested/grateful for an answer.

    I recently updated my computer from Vista Ultimate to Windows 8.  I did a clean install of Windows 8, because there is nothing special about the machine I wanted to preserve.  In all cases, the upgrade went without a hitch and I was soon back up with Windows 8 as my OS (I really like, btw).

    The only oddity I noticed after the upgrade is that my DVD drive was not recognized by the operating system.  Remember, this is the same DVD player that was used to install the OS, so I found it rather peculiar.  After a bit of lost time, try software solutions theoretical I started to play with the equipment.

    My motherboard is an ASUS M3A78-EM.  My hard drive is attached to the SATA1 port and my DVD player is plugged into the SATA2 port.  I removed the DVD drive from SATA2, plugged into SATA3, restart Windows 8 (from HDD on SATA1) and Windows 8 now recognizes the drive!

    I thought it was really weird, so I stop, put the DVD on SATA2 drive, rebooted, and the drive was no longer available in Windows 8.

    OK, so I thought that maybe the SATA2 channel was bad (even if he had worked at the Windows 8 DVD installation, just an hour or two before), so I put my HDD on SATA2 and the DVD drive on SATA1.  After doing this, Windows 8 start very well (so there is nothing wrong with SATA2), and it recognizes the DVD on the SATA1 drive.

    OK, so I did that for a while, and virtually all combinations I tried worked as long as the DVD player is not plugged in SATA2.

    I cannot live with that, but thought it was really strange.  Also, I note that the old operating system (Vista) was acknowledging the same DVD player while it was plugged on SATA2.  This leads me to believe that the problem has something to do with Windows 8, but I can't imagine what could be the cause.

    Thanks dude.  After you create this registry key/value and restart Windows 8 was able to finally see my DVD drive on SATA2.  =)

  • CD/DVD-ROM not recognized since the installation of Vista, without errors

    Installed Vista and lost CD rom? CD works can be heard during the execution but system will not find CDROM? Deleted upper and filters low but still will not find CD ROM?

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Pioneer BLU - RAY and DVD discs not recognized by Windows 7

    The discs were fine until I installed Windows 7 Home Premium 64-bit. Before my hard drive crashed, I was using Windows 7 Pro 64 bit. The computer was built by a local store, so I don't know if they have done something special to get discs running, but readers are reported as compatible with Win 7.

    Readers are:

    PIONEER BDR - 205 Blu - ray

    DVD PIONEER DVR - 218L

    My motherboard is ASUS P6TD Deluxe, BIOS 0106

    I am very handicapped and rely heavily on my computer to work. I can't load my well-being critical software until I get these discs work, then I'll be very grateful for any help.

    Thank you

    Jeff

    Hello

    I suggest to follow the steps provided and check if it helps.

    Method 1: Run the troubleshooter of material and check if that helps.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2: Your CD or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/982116

    Alternatively, you can install the drivers from here:

    BDR-205 Blu - ray Pioneer driver:

    http://www.PioneerElectronics.com/Pusa/Professional/computer-drives/BDR-205

    Method 3: Tips for solving common driver problems:

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

    See also: automatically get recommended drivers and updates for your hardware.

    http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

    For all windows questions do not hesitate to contact us and we will be happy to help you.

  • DVD player not recognized by the computer

    Have x 2 divided windows 8.1.  Have loaded the software for LG Super Multi blade DVD player.  No AutoPlay.  Work on another computer.

    Hello Arnoldj,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I understand that you are having problems with your optical drive not auto playback you discs in point 8.1 of Windows. Although it is not a Windows 8.1, but a document of Windows 8 steps will be the same, and I think is where we should start. Please visit the HP support document: HP PCs - impossible drive reading discs (Windows 8), to focus on the problem you are experiencing.

    If you still need additional help feel free to re-post. Thanks for posting on the HP Forums. Have a great day!

Maybe you are looking for