HDD dv6 1 305 full, safe mode works

Similar Questions

• Cannot go beyond the Office in standard mode, various scenarios of (non-performance issues) freezing. Safe MODE works very well.

  Cannot go beyond the office longer. Freezes clicking on dialog boxes does nothing most of the time. Clicking on some dialog boxes will close them but leave the box empty and completely white out. The icon on the taskbar is different than what is on the desktop. Everything works fine in safe mode. I have worked on this for almost 3 weeks and have been asking for help. One of my diagnostic checks give several (IRQ) has not been defined in time. (OFOO:0132 or OFOO:XXXX)

  Running Vista 32-bit Basic. Did a restore of the system (not a full reboot) and he made sure the cursor to move to the desktop (but no result has produced most of the time) Unlike before where the cursor was just immediately frozen.  Also received DST short Test failed and OFOO:065 D. error reading disk-DST self-test. Do not forget that in Safe Mode, I can do everything very well. It's the only way I can access the internet. If anyone can help me I'll always owe to your kindness.

  Hello

  OFOO:065 D. errors of disk-DST Self Test Read Error DST short Test failed normally mean hard.

  See you soon.

• Black screen safe mode works fine

  Hi all

  I had trouble with my Toshiba Satellite L305D for a few days now.  Services began randomly closing for example, processes Search host index.  So today I had to restart from the beginning, everything closes 1 by 1.  Now, when I start in normal mode, I get the black screen.  All right is safe mode.  I did a scan of the prompt on the review from a user on another thread, but have no idea how read the results, which contained several questions that cannot be repaired.  I have included 2 article with the expressions "cannot fix.  I would appreciate help from someone who knows how to analyze this mess.  If anyone has any other suggestions, I'm open.  I can't afford to service so I have to find a way to solve this problem on my own.  Thank you!!

  POQ 70 ends.
  2011-11-04 13:43:43, Info CSI 0000016e [SR] full Verify
  2011-11-04 13:43:44, CSI 0000016f [SR] components Info check 100 (0 x 00000064)
  2011-11-04 13:43:44, transaction Info CSI 00000170 [SR] beginning verify and repair
  2011-11-04 13:43:53, info CSI 00000171 Member \SystemRoot\WinSxS\x86_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini file hashes are not actual file [l:24 {12}] "settings.ini": "
  Found: {l:32 b:ntPb8a3owMmbzl2TXFHogrOTUqnXgzASIdBVmJptaGE =} expected: {l:32 = b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o}
  2011-11-04 13:43:53, info CSI 00000172 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2011-11-04 13:43:54, info CSI 00000173 Member \SystemRoot\WinSxS\x86_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini file hashes are not actual file [l:24 {12}] "settings.ini": "
  Found: {l:32 b:ntPb8a3owMmbzl2TXFHogrOTUqnXgzASIdBVmJptaGE =} expected: {l:32 = b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o}
  2011-11-04 13:43:54, info CSI 00000174 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2011-11-04 13:43:54, info CSI 00000175 [SR] this element is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "
  2011-11-04 13:43:57, Info CSI 00000176 repair results created:

  POQ 90 ends.
  2011-11-04 13:46:39, CSI Info 000001 d 0 [SR] check all the
  2011-11-04 13:46:39, CSI Info 000001 d 1 [SR] repair of components 1
  2011-11-04 13:46:39, CSI Info 000001 d 2 [SR] beginning operation check and repair
  2011-11-04 13:46:39, CSI Info 000001 d 3 hashes of file Member \SystemRoot\WinSxS\x86_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini is not actual file [l:24 {12}] "settings.ini": "
  Found: {l:32 b:ntPb8a3owMmbzl2TXFHogrOTUqnXgzASIdBVmJptaGE =} expected: {l:32 = b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o}
  2011-11-04 13:46:39, CSI Info 000001 d 4 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2011-11-04 13:46:39, CSI Info 000001 d 5 hashes of file Member \SystemRoot\WinSxS\x86_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini is not actual file [l:24 {12}] "settings.ini": "
  Found: {l:32 b:ntPb8a3owMmbzl2TXFHogrOTUqnXgzASIdBVmJptaGE =} expected: {l:32 = b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o}
  2011-11-04 13:46:39, CSI Info 000001 d 6 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2011-11-04 13:46:39, CSI Info 000001 d 7 [SR] this element is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "
  2011-11-04 13:46:39, repair results 000001 d 8 CSI Info created:

  Hello

  These are mistakes in the sidebar - settings.ini and are not the cause of the black screen problem.

  As this article States the question may be totally ignored.

  The SFC.exe command reports Settings.ini file errors in the CBS.log file after you add gadgets to the
  Windows Vista Sidebar by using the Sysprep tool and an Autounattend.xml file.
  http://support.Microsoft.com/kb/947595

  -----------------------------------------------------------------------------------------------------------------------------

  These errors only are in the settings.ini for the sidebar and are not a serious problem by all means.

  Close the sidebar for that.

  Is there the thing for the settings.ini - run AutoRuns and look at the SideBar Gadget entries - all
  This point is no longer existing files such as temp or uninstalled gadgets or not running? Generally
  those who have "Yellow icons" on the left side and the files/folders will not exist. If so right click on them
  and delete - restart. This may correct the errors that you see.

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  -------------------------------

  Another process to try is to remove everything except a gadget - everything what you think is the most simple, that you use.
  Maybe the calendar. Then RESTART - use another simple gadget, and delete the first class used
  -RESTART again. See if that helps.

  Rarely, the error causing the problem with the sidebar and not not affect the system in general.

  The SFC.exe command reports Settings.ini file errors in the CBS.log file after that you add gadgets to
  the Sidebar of Windows Vista by using the Sysprep tool and an Autounattend.xml file.
  http://support.Microsoft.com/kb/947595

  -------------------------------

  Another method to try with the SideBar does not is to copy the Settings.ini to another folder, then
  Delete it - and then start sidebar.

  --------------------------------

  You can also try to restore any copy of a Vista DVD (even 32 or 64 bit however).

  Access files on your Vista installation DVD
  http://www.Vistax64.com/tutorials/86959-access-Vista-install-DVD-files.html

  How to extract system files missing from the DVD of Windows 7/Vista.
  http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

  ==================================================
  ==================================================

  For the BlackScreen:

  With the help of Toshiba, their books online, check the drivers, diagnostics and ask in their forums
  for problems known.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  Is the black of the screen the BIOS (Setup/settings) - or if Windows loading - does show the cursor?

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files. You can also
  Safe mode allows to save data.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Qosmio F50 - BSOD after loggin into Windows and only safe mode works

  Hi all!

  I have read many posts on the forum and they are all a great help... very good community... but I fear now, I'm the one who has problems ask for help...

  I have a Toshiba Qosmio F50 with Windows Vista and I've updated 3 days ago the pilots of the BIOS, Fingerprint Software and software of face recognition to the latest versions with updates on the official website of toshiba. After that, I got a blue screen, 4 hours later, and since then I connect just Windows and 10 seconds later... BLUE SCREEN! and no other choice than to unplug the computer and switch off. I can only log in Mode without failure.

  Unfortunately I can't get windows to a State of previows that I don't have the option to save backups of active recovery.

  I have some windows system errors in case the Manager and that's what they say:

  *-------------------------------------------------------------------------------------------------------------*

  DCOM got error "1068" try to start the service fdPHost with arguments "" to start the server:
  {145B4335-FE2A-4927-A040-7C35AD3180EF}

  DCOM got error "1084" try to start the service EventSystem with arguments "" to start the server:
  {1BE1F766-5536-11D1-B726-00C04FB926AF}

  DCOM got error '1084' trying to start the ShellHWDetection service with arguments "" to start the server:
  {DD522ACC-F821-461A-A407-50B198B896DC}

  Unable to start a DCOM Server: {A0717E52-8AC8-4DD9-8682-0B76775125E6}. The error:
  '2' that happened at the start of this command: c:\windows\system32\divxsm.exe-integration

  The next (s) starting or starting system could not load:
  mfehidk
  SCDEmu
  spldr
  Tosrfcom
  Wanarpv6
  ---------------------------------------------

  * I have also being the .dmp file debugging registration errors and content: *.

  ------------------------------------------------

  1: kd >! analyze - v
  ************************************************** *****************************
  * *
  * Bugcheck analysis *.
  * *
  ************************************************** *****************************

  KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e)
  It is a very common bugcheck. Usually the PIN address of exception
  the driver/function that caused the problem. Always note this address
  and the date of the picture link / driver that contains this address.
  Some common problems are the exception code 0 x 80000003. This means a hard
  coded breakpoint or assertion was hit, but this system has been started
  / /NODEBUG. It is not supposed to happen as developers should never have
  breakpoints coded hard in retail code, but...
  In this case, make sure a debugger must be connected and the
  system startup/DEBUG. This will we will see why this breakpoint is
  happening.
  Arguments:
  Arg1: c0000005, the unhandled exception code
  Arg2: 8eb51aa9, the address that the exception occurred at
  Arg3: 8b31b010, frame trap
  Arg4: 00000000

  Debugging information:
  ------------------

  EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - the instruction at 0 x % lx 08 referenced memory at 0 x % 08 lx. The memory could not be %s.

  FAULTING_IP:
  + 12A
  8eb51aa9 f6461c40 test byte ptr [esi + 1Ch], 40 h

  TRAP_FRAME: 8b31b010-(.trap 0xffffffff8b31b010)
  ErrCode = 00000000
  EAX = 00000000 ebx = 927 b 4470 ecx = 927 b 4470 edx = 003e0000 esi = 00000001 edi = 927 b 4504
  EIP = 8eb51aa9 esp = 8b31b084 ebp = 8b31b2b8 iopl = 0 nv up ei pl nz na po nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010202
  8eb51aa9 f6461c40 test byte ptr [esi + 1Ch], 40 h ds:0023:0000001 d =?
  Reset the default scope

  CUSTOMER_CRASH_COUNT: 3

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0X8E

  Nom_processus: Skype.exe

  CURRENT_IRQL: 0

  LAST_CONTROL_TRANSFER: from 90f18482 to 8eb51aa9

  STACK_TEXT:
  WARNING: Frame IP not in any known module. Sequence of images may be wrong.
  8b31b2b8 90f18482 00000000 00000000 927b 4470 0x8eb51aa9
  8b31b2e4 8224010 89bbe960 c a50c5b48 b 927, 4470 Mpfp + 0 x 7482
  8b31b328 8222b3e7 8222b 712 69798145 and 00000002 nt! IopfCompleteRequest + 0x11d
  8b31b550 90f5cfd7 89b4a3e8 84f341a8 00000010 nt! RtlWalkFrameChain + 0 x 58
  8b31b574 822c1fd3 adaf0d40 a50c5b48 a50c5b48 tdx! TdxTdiDispatchCreate + 0 x 213
  8b31b638 822c1fd3 89bbe960 a50c5b48 a50c5b48 nt! IofCallDriver + 0 x 63
  8b31b688 82426ce1 a 697985, 9 a8e5d364 89b4a3d0 nt! IofCallDriver + 0 x 63
  8b31b758 8244c3cf 89b4a3e8 00000000 a8e5d2c0 nt! IopParseDevice + 0xf61
  8b31b7e8 6 00000000 00000240 nt 8b31b840 824240c! ObpLookupObjectName + 0x5a8
  8b31b84c 82425bc3 8b31ba98 00000000 90e82400 nt! ObOpenObjectByName + 0x13c
  8b31b8c0 8242c51d 8b31bad8 8b31ba98 02000000 nt! IopCreateFile + 0x63b
  8b31b91c 90fcf5de 8b31bad8 8b31ba98 02000000 nt! IoCreateFileEx + 0x9d
  8b31bb60 90fcd1da b2e767f0 a5087508 00000016 afd! AfdTdiCreateAO + 0 x 565
  8b31bbe4 90fd5040 84f3893c 89bcc0f8 8b31bc0c afd! AfdBind + 0x2e3
  8b31bbf4 822c1fd3 89bcc0f8 84f38860 84f38860 afd! AfdDispatchDeviceControl + 0x3b
  8b31bc44 824525e5 84f37130 84f38860 84f3893c nt! IofCallDriver + 0 x 63
  8b31bc64 82452d8a 89bcc0f8 84f37130 03e7fb00 nt! IopSynchronousServiceTail + 0x1d9
  8b31bd00 8243ca5d 89bcc0f8 84f38860 00000000 nt! IopXxxControlFile + 0x6b7
  8b31bd34 8225da1a 00000464 000002e4 00000000 nt! NtDeviceIoControlFile + 0x2a
  8b31bd34 77069a 94 00000464 000002e4 00000000 nt! KiFastCallEntry + 0x12a
  00000000 00000000 00000000 00000000 0x77069a94 03e7fc30

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  Mpfp + 7482
  90f18482? ???

  SYMBOL_STACK_INDEX: 1

  SYMBOL_NAME: Mpfp + 7482

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: Mpfp

  Nom_image: Mpfp.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 48445e60

  FAILURE_BUCKET_ID: 0x8E_Mpfp + 7482

  BUCKET_ID: 0x8E_Mpfp + 7482

  Follow-up: MachineOwner
  *----------------------------------------------------------------------------------------------------------*

  Guys do you have an idea what could wrong? Or how world you this problem?

  Any ideas would be welcome. I'm starting to get very frustrated after 3 days in the problem... Thank you very much!

  * Niter *.

  Hello

  I agree with Luke. It of really impossible that this error would be caused by one of the tools updated Toshiba.

  I see in your post a few notifications on DivXsm.exe which is placed in the system32 folder and Skype.exe.

  In my opinion, there is a compatibility issue with 3rd party applications that are installed on your laptop.
  I have no idea why this has happened after the execution of some updates, but it seems that the system has been confusing upward.

  As suggested by Luke, you could start the recovery using the Toshiba HDD recovery option.

  Check it!

• My Xp does not start, only in safe mode. Normal mode just keeps looping in the loading screen. Safe mode works fine, what to do?

  As the title says. What should do?

  I found out what is wrong. The hard drive could not be "read". Drive C and D was crushed. Had to change the hard drive. Changed, working (y). Thanks anyway :)

• Inspiron 9400 laptop, Windows Vista, black screen with cursor, befor connection, safe mode works.

  Good then Ive internet scowerd to subject a houre read a lot of black screen of death without success problems.  Ive come to the conclusion that it is a unique problem.

  Inspiron 9400, Windows vista

  Problem: I'm catching up after startup, it does not show the vista logo but showed the loading bar, doesn't make it to the login screen. Instead shows the bright black screen with a cursor, the cursor moves freely. Ctrl-alt-del does not work, StickyKeys is sound but no visual. So we know that this abomination of windows load. We are now trying to startup repair. We know that the battery did not work because more than a year, the bios indicates there is no battery, I wonder what this block that says battery is lol.

  Whatcha got for me internet doesn't let me down.

  PS one of the dumbest moments of windows.

  Repair window said. May take a few minutes.

  Startup Repair process may take an hour to complete

  Hi Zirrer,

  Step 1:

  I suggest you to visit this link provided below.

  Why my screen is black when I start windows 7
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Step 2:

  I would also suggest update you your display adapter drivers and see if that fixes the problem.

  Reference:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  To download drivers, you can visit this link below.

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&CS=19&l=en&s=DHS&OS=WLH&OSL=en&SystemID=INS_PNT_P4_9400&CATID=-1&impid=-1

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• After installation I got the error firefox does not start, safe mode does work

  Report ID

  BP-7e0bbdc9-3b5b-44DB-8831-d8a352130608
  BP-3447b290-e4e1-4690-BBF7-14ae72130608
  BP-2894daaf-C601-4DBD-9031-001fe2130608

  This is the error after installing firefox on the pc. Safe mode works well. I also send the accident report.

  Please give me a tutorial to solve this problem.

  Hello, please start firefox in safe mode (by pressing the shift key, while it launches) & go firefox > options > advanced > general & disable hardware acceleration.

• Windows XP worked when to stop, and when turned on overnight, it only shows: safe mode, safe mode with networking etc. This is the result of an update from Microsoft to restart?

  The system does not start normally and brings only to the top of the screen black ad askes to start windows normally, safe mode or network, etc.  What should I do?

  Hello Larry,.

  Once selected, Safe Mode works?

  If so, try boot minimum troubleshooting:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  If this is not the case, have we not access to a Windows XP CD?

  If so, we can use it to boot into the Recovery Console and to pursue the options from there.

  Let us know.

  Best regards

  Matthew_Ha

• Text of Firefox tabs, settings, firefox, menu button... does not load, if I'm not in safe mode.

  Issue describes the situation well, for some reason the text beside all my buttons (including everything in the area of the firefox button) has disappeared. Web sites work well, it just seems to effect the entire text of the firefox program. I deleted all the data from my computer and reinstalled firefox program and had no success, I tried disabling all my addons & had no success. If I go into firefox safe mode works fine, it just happened today out of the blue.

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/
  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• After access freezes Office safe mode after pressing on on Windows XP

  I get the blue screen advising to go in safe mode to fix.  I'm in safe mode after you restart stopping computer, I press f8 alnd when I get xp a lot of filenames scroll down then the comp freezes there. I can only try to reboot by turning off my computer, again and the same thing happens again. safe mode works only for the restart.

  Hi Happy New Year!   I've been away during the holidays and the day before where I left my computer just does not respond after trying to enter safe mode.  I ordered a new computer and meanwhile using my Dell laptop which is about 6 years old, but works on my wireless router.

  From what I see in blue, the screen and the black screen is that it is a hardware problem, I'll have to call Dell to get it going one last time, so I can get some files.

  From the dell Web site he suggested out me the hard drive, then put it again.

• Windows XP safe mode does not

  The computer, I work with the University running windows xp sp2, not authentic and is infected with several viruses and to among which are Sality.AT and Hikjav! INF and Hikjav! At and some more... I had Avira installed on the computer and I uninstalled and installed NOD32 today, I tried to analyze your computer in safe mode I discovered safe mode works not at all, whenever I tried running safe mode, I was sent to the page asking if I want to start windows normally or in safe mode... I don't know if scan with NOD32 will help me and it removes all viruses and the to tho I should mention especially, he found the virus Sality.AT in partitions on my hard drive. I discovered that the computer is infected with the virus and worms, when I used my flash at home on my computer when I use MSE as protection program... I thank your help and let me know what I need to do...

  Thanks in advance...

  Kind regards

  Zeinab

  Is that you are not able to start in safe mode, and then try the other options such as N/W and safe mode with command in safe mode prompt.

  In SafeMode with command prompt when you have the command window press Ctrl + SHIFT + ESC to open the Manager tasks, then click on file-> new task-> Type EXPLORER. EXE and press the ENTER key. Close the Task Manager and you will be able to see the desktop.

  If you are still not able to start then do a system restore to restore the computer to an earlier date when the computer was working fine and then run a scan for malware removal.

  If you want to work in normal mode to remove the virus then try Microsoft online safety analysis, which manages similar definitions than MSE

  Security scanner: http://onecare.live.com/site/en-us/default.htm

  Or you can also run a scan with Kaspersky AVP tool:

  http://devbuilds.Kaspersky-Labs.com/devbuilds/AVPTool/

  Touhami

• Stuck in Mode safe mode, how do I boot into Normal mode?

  Original title: Mr rob b

  How can I start my computor in normal windows: safe MODE COMES in EVERY CORNER I am trying

  See if the answer and the answers to this thread help you:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/safe-mode-works-but-i-cant-log-on-to-the-normal/6e877026-3f55-4ca0-A458-aecdea54926e

• DDPE F8 safe mode menu causes freeze on E7450 processor and controller

  Hello. Strange problem here that happens (so far) on the new laptops to model E7450 processor and controller with DDPE installed. Only tried with Windows 7 Pro 64-bit installed.

  • The laptop freezes completely and must be cold turned off when I use the F8 method to get the safe mode. Gets the menu option of safe mode, it hangs. Hit the caps lock button does not switch the LED, no action at all in the laptop. Must cold power turned off at this point.
  • Using to start in SafeMode MSCONFIG method works and the laptop starts up in safe mode normally.
  • Method F8 safe mode works very well after that I have DDPE to disable and remove the Environmnent of authentication pre-seed (PBA)

  Someone else approaching this combination of E7450 processor and controller/DDPE/F8 safe mode or have all of the answers from Dell support?

  Thank you.

  Hi bschwartz,

  We need more information to help solve this problem. You know the specific version of RFP | E you leverage? The E7450s that we had problems with the first revisions of the BIOS and the SED because a new way of management with how data is passed from the disk to the operating system. I would definitely say update BIOS and using the latest version of RFP | E available.

  If possible, would you be able to open a ticket with support at 877.459.7304 Ext. 4310039

  or via techdirect.dell.com

• Satellite T135 how to enter Safe Mode and HDD Recovery if 'F8' does not work

  Hello everyone

  I have a laptop Toshiba Satellite T135 and it crashed recently. Since then, whenever I turn it on, startup repair is enabled automatically. But it does not fix the error.
  I tried to solve the problem with the system restore, but that no longer works. So I think I have to go through the procedure of HARD drive recovery.

  The problem is that I have a lot of data on my laptop that I must first of all safe. I wanted to do it via Safe Mode that supposedly, I should be able to enter by pressing "F8" at initialization, when the Windows logo appears. But my laptop is not responding when I press F8, but rather getting a sound alert, if I press the button for a long time.

  Apart from how to enter safe mode by pressing F8 during initialization does not work, I have a second question: Toshiba Recovery Wizard is the equivalent for the HDD recovery procedure? It is the only similar option that I could find...

  Thank you very much for your advice.

  Hello

  The recovery of HARD drive installs the image of Toshiba.
  The image is the package that contains the operating system, drivers and all the tools that have been installed on the first day of purchase; simply said; using HARD drive recovery you would set the laptop back to factory settings.

  You want to save the date before you install the operating system once more?
  Well, remove the HARD drive, put this in a USB HDD enclosure and move the file to the HARD drive to another computer.
  It would be the best way to get the file save.

• Firefox continues to go from full screen to the small screen, every minute! I tried to reset to original settings and tried to go into safe mode, and the screen keeps minimizing. Very difficult to work in the window when it is a quarter of the size of my

  At first I thought that maybe I'd hit something, but then I just sat there for a minute (literally) and didn't touch a thing and he always downplayed. I have several tabs open up working on the different classes.

  Try:

  • http://KB.mozillazine.org/Prevent_websites_from_disabling_new_window_features
  • http://KB.mozillazine.org/JavaScript#Advanced_JavaScript_settings

  See also:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode