HDD ERROR 2000 - 0142

Similar Questions

• Hard drive failure: error 2000-0142 since current default Scan PC.

  Original title: error 2000 - 0142

  Activities of PC by default Scan on my laptop DELL Inspiron 5520. Hard drive failure: 2000-0142 error what does that mean?

  REDA

  According to the answer by a representative of Dell here:

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19467468/20188938.aspx

  It seems that the error means what it says - the hard drive has gone bad and should be replaced.

  I highly recommend that you only backup your data to another drive immediately and then contact Dell for confirmation about the error and advice on the best course of action.

• error 2000-0142

  So I'm the mother of bricks typical of the update of the bios dell (aprox 1.5 year ago) I just installed a motherboard renovated same stickers for CN-07JNHO info. Started machine and loading, I received the request of 'reboot & select proper boot device '. I rebooted w / f12 and got into the bios page. He had the hard drive to boot class 4th so I moved it to... recorded 1 restart the same thing. Double checked that my hard drive son have been linked to the 3rd test... same results. Did a check of the ePSA and got an error code 2000-0142 as hard drive 0... as it is the is not find? I'll post pictures to help and any help is appreciated!

  error code # 2000-0142 validation # 114880

  History *.

  Before pasting the couple paper weight thousand dollar in the closet... it would abandon the beep codes at the start and never from desktop... I made a few bios hardware reset with swaping clips on the pins / changed MB battery ect and he would sometimes launch and be playable until he cut power failure or an ect update and when starting it has always been the problem with the the bios loading. I got that last for a few months... until finally nothing helps it load the BIOS.

  Alienware Aurora R4

  service tag #.

  ADMIN NOTE: maintain the label removed by privacy policy >

  (awarded to nine MB)  (old MB #)

  ADMIN NOTE: maintain the label removed by privacy policy >

  )

  CPU i7 - 3930 K 3.20 GHz

  Windows 7 64 bit OP

  

  

  = 2000-0142 drive self test failed

  You will probably have to replace the hard drive...

• Dell xps 8100; Disk failure hard error 2000-0142 0 self test status 79

  Hi guys, I was wandering in the forums for a few hours, now looking for ana response to this question, and can't find anything clear. I have a XPS 8100 that I run a diagnostic and received a 2000-0142 error code that says MSG: error code 2000-0142 hard drive FAILURE 0 self-test status: 79 based on what I read in the forum is that there is a disk failure, and the only recourse is to solve the problem in my view is to replace the drive. Firstly, can someone please give me an absolute confirmation that it is indeed what I have to do, or is there something else I should do to fix this problem first? If a replacement drive is there someone could please tell me how can I do to get my OEM software off the coast of the partition recovery and on my new drive. I now office preinstalled and, of course, premium Windows 7 I would like to see on my new hard drive and I was not provided with one of the disks at the time of purchase. Thanks in advance to all those who respond

  Hi XPS8100kid,

  Welcome to the Dell Community Forum.

  The 200-0142 error is for hard drive failure and you need to replace the hard drive.

  Since the hard drive has not, you would not be able to access the partition recovery on it. Data would be lost and the software already installed on your computer will need to be reinstalled.

  Windows 7 will need to be installed on the new hard drive. Please click the link below to get the procedure of re - install Windows 7.

  http://Dell.to/15MYHsz

  If based in the United States, you can ask for the backup drives by clicking the link below:

  http://Dell.to/Zj7oHA

  I would like to know if additional assistance is needed.

  Thank you and best regards,
  Babita S
  #iworkforDell

  For easy access to the drivers, manuals and updates, please visit our Support Site .

• error code: 2000-0142

  System-dell inspiron 3542

  error 2000-0142...

  What should do?

  Help, please...

  Thank you...

  The hard drive has failed.

  If the system is under warranty, contact Dell with the exact error and they will replace the drive.

  If the system is no longer under warranty and you need help to choose a replacement drive and installing it, please post the complete model of the system number (i.e., N5110 Inspiron, XPS L501x, etc.).

• Error code #2000-0142 after the laptop is a Dell fall.

  Original title: I have a Dell Inspiron 1545 with Windows 7 x 64 which does not load windows.

  No new software or configurations have been added since this problem started about 2 weeks ago.  However, the laptop fell.  I was able to run the system diagnostics by pressing F12 at startup.  All retired except for one hard drive tests (DST short Test), who has found the error #2000-0142.

  I know that some forums suggest that the error refers to a bad hard drive or corrupted.  But others have had some success in trying the installation CD/DVD.

  Basically, the computer crashes windows tries to load/startup and I get to the blue screen with a dove and the leaves of some green in the background and a mouse cursor that works.

  I tried several methods of recovery without success. Whenever I find myself on the same blue screen.  I inserted the DVD FAB with the Windows installation/recovery.  I tried installing but the computer froze in the process.  I'll try the repair option, but the computer is frozen on the System Recovery Options. The menu lists the hard drive, but the compputer seems to be stuck trying to figure the size of the partition with.  Is there a problem if I tried the method of installation first, before you try the repair option?

  You will need to replace the hard drive.

• Error code 0142

  I got up this morning and turned on my computer and I got an error Code 0142.  Error 2000-0142 MSg.  MSc unit 0 Drive Test failed.  79 status byte.  Can someone help me?  My computer was working fine yesterday when I turned it off.

  
  

• Error code: 2000-0142, HDD 0-Self Test UN Succesful status 79.

  Hello guys

  I ran a Diagnostic Test on my new laptop N5010, it failed the Test of hard drive and gave this message "error Code: 2000-0142, HDD 0-Self Test unsuccessful status 79.»

  Can someone help please...

  Regarads
  

  khanisar

  Error Code 2000 - 0142, indicates a failing hard drive / failed and you need to replace it, because it is new laptop for a replacement of the hard disk, contact the Dell Technical Support and provide the error message.

  Bev.

• ERROR CODE 2000 - 0142 WHAT DO I DO WITH THIS CODE?

  I have a laptop DELL with Windows Vista loaded.

  It tries to load the desktop but keeps running without result green bar

  CHECKDSK is conducted without all the mistakes are found.

  DIAGNOSIS showed the color screen, then the error code 2000-0142

  which seems to be related to the hard drive.

  F2 function key works to change settings

  What should I try to run windows?

  Thank you

  Hello

  It is an error code Dell saying that your drive hard has failed and must be replaced.

  Read this information from the Dell Community.

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19451299/20115134.aspx#20115134

  http://en.community.Dell.com/support-forums/disk-drives/f/3534/p/19498610/20329964.aspx

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19485947/20274290.aspx

  For more information about error codes Dell, please ask in the Dell Community Forums.

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• error on black screen 2000-0142

  original title: black screen

  Window vista DELL screen black error code 2000-0142 portable hard drive 0 that I tried the updata virus leaves the next day then morning black screen

  Hi yolandasalgado,

  Try this link and see if that helps you...

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_126A722713F6D0D0E0401E0A55174AE6&isLegacy=true

  Concerning

  GT4U

• Drive hard error Code 2000 - 0142

  Inspiron 15 (3531, mid-2014)

  I tried boot diagnostic that the result has failed with the error code 2000-142.

  I have used a quick diagnostic race through dell online support site - it shows critical errors found

  for hardware failure then suggested for a replacement.

  Targeted both reading test SMART short self-test is broken.

  We hope to hear from you on your recommendations of experts on hardware issues.

  [Admin NOTE: maintain the label removed in accordance with the TOU strategy]  [Admin NOTE: deleted in accordance with the Express service code TOU strategy]

  Ryan Ibarreta - [Admin Note: personal information]

  Philippines

  Error code 2000-0142 usually indicates a failing hard drive / failed, first of all, try to remove and reinstall the hard drive, then re-run the diagnostic tests and see if you receive the same error.

  If the same error is received, the hard drive has failed, then you need to replace it.

  If you have a warranty from Dell, contact Dell Technical Support for a replacement hard drive.

  Bev.

• 2000-0142 Validation 71808 disc error

  I know this error code 2000-0142 I need more information about 71808 validation.

  Mateus Oliveira

  Error code 2000-0142 usually indicates a failing hard drive / failed, first of all, try to remove and reinstall the hard drive, then re-run the diagnostic tests and see if you receive the same error.

  If the same error is received, the hard drive does not, then you need to replace it, followed by reinstalling windows and loading drivers and applications.

  Bev.

• boot error 2000-0141

  I have a dimension xps 420. 3-4 months. It worked perfectly until this morning. yesterday, I installed a game that went very well. but the computer is restarted apparently a drive could not be found and the error code 2000-0141 appeared. Ive has diagnose repeatedly to no gain. I don't know what I have to do.

  The message that is displayed is as follows:

  . Drive 0 not found: Serial ATA, SATA-0

  Alert cannot detect one or several drives during POST.

  Hit the F1 key to continue. F2 to run the Setup program.

  Press F5 to run onboard diagnostics.

  F1 is simply the message repeats. using f2, boot sequence displays 5/6 discs labeled (absent). F5 eventually give me the error code 2000-0141

  Help please!

  Hello, I'm going now you have posted this 6 years, don't know if you'll ever find my message, but in case you do, please, if you can, let me know the alternative link to the solution of the error 2000-0141, the link to the KB document is not here, but most probably it was deleted? I hope not!

  Thank you very much!!!

  DivFil

• Load table a sequence of image in the same folder: it works, but why the security error #2000?

  I use this code (from Kglad) to load a sequence of images in alternative loaders, in order to make the sequence look like a (silent) movie.

  I have the pictures and the flash file in the same folder. The code work - load sequence, but I'm SecurityError: Error #2000: no security context is active.

  I would add a url somewhere, path or anything is missing?

  var int count;

  var imageArray:Array is ["1.jpg", "2.jpg", "3.jpg", "4.jpg", "5.jpg", "6.jpg", "7 jpg", "8.jpg", "9.jpg", "10.jpg", "11.jpg", "12.jpg", '13.jpg'];.

  var ldr0:Loader = new Loader();

  ldr0.contentLoaderInfo.addEventListener (Event.Complete, loadCompleteF);

  var ldr1:Loader = new Loader();

  ldr1.contentLoaderInfo.addEventListener (Event.Complete, loadCompleteF);

  btn.addEventListener (MouseEvent.CLICK, clickF);

  function clickF(e:MouseEvent):void {}

  Count = 0;

  loadF();

  }

  function loadF (): void {}

  addChild (this ["ldr" + count %2])

  This ["LDR" + Count %2]. Load (new URLRequest (imageArray [count]));

  }

  function loadCompleteF(e:Event):void {}

  Count ++;

  if(Count<imageArray.Length) {}

  If (cela ["ldr" + count %2].content) {}

  This ["LDR" + Count %2].unloadAndStop();]

  }

  loadF();

  } else {}

  }

  }

  Is there something you want to load that does not exist.  13 jpg is a likely candidate.

  use the function trace to identify.

• Loader: Nan.jpg + SecurityError: Error #2000: no security context is active.

  Hello.

  By using the code below, I get the 2035 error, informing me that my jpg is not a number.

  Same code with the ioErrorHandler bits comments, outputs SecurityError: Error #2000: no security context is active.

  Same code without the NombrAl and with the right way to the jpgs in the string, works fine (charges 16.jpg), as such - var req:URLRequest = new URLRequest("..) (' / images/16.jpg ");

  Any ideas?

  import flash.display. *;

  import flash.net.URLRequest;

  import flash.display.Loader;

  import flash.events. *;

  import flash.utils.setTimeout;

  var req:URLRequest = new URLRequest("..) /images/"+randomNumber+".jpg");

  var loader: Loader = new Loader();

  var randomNumber:Number = Math.ceil (Math.random () * 16);

  function imageLoaded(event:Event):void

  {

  addChild (loader);

  }

  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, imageLoaded);

  Loader.Load (req);

  loader.contentLoaderInfo.addEventListener (IOErrorEvent.IO_ERROR, ioErrorHandler);

  function ioErrorHandler(e:IOErrorEvent):void {}

  trace (e.Text);

  }

  use:

  import flash.display. *;

  import flash.net.URLRequest;

  import flash.display.Loader;

  import flash.events. *;

  import flash.utils.setTimeout;

  var randomNumber:Number = Math.ceil (Math.random () * 16);

  var req:URLRequest = new URLRequest("..) /images/"+randomNumber+".jpg");

  var loader: Loader = new Loader();

  function imageLoaded(event:Event):void

  {

  addChild (loader);

  }

  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, imageLoaded);

  Loader.Load (req);

  loader.contentLoaderInfo.addEventListener (IOErrorEvent.IO_ERROR, ioErrorHandler);

  function ioErrorHandler(e:IOErrorEvent):void {}

  trace (e.Text);

  }