HDD LED does not

Similar Questions

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Re: Tecra S3 - new 250 gb Sata hdd - windows does not recoginse

  Hi all

  I have a tecra S3-PTS30-E, which came from the company, I work for which was no longer necessary.

  I replaced the current 40 GB with two different - hdd

  Western Digital 250 GB WD2500BPVT

  Toshiba 120 GB - MK1252GSX

  I tried both separately and windows XP pro service pack 3 will not recognize either.

  I have downloaded the driver sata toshiba Web site and installed via F6 at startup, windows asks you what driver, windows 2000 or XP, I click on XP and you enter, windows continues until advising so none found HDD

  I also tried to download drivers intel after searching other threads, and it does not work through floppy.

  I also added the drivers toshiba XP ISO using nlite to create a disk slipstream and while xp is loading the disc, I noticed 'pilot toshiba raid' being installed. Same no result no hard drive found.

  Can anyone help?

  Thank you

  Jin

  > Tecra S3 - new 250 gb Sata hdd - windows does not recoginse

  According to the specifications on this page:

  http://reviews.CNET.com/laptops/Toshiba-Tecra-S3-s411td/1707-3121_7-31556311.html

  Your laptop's Ide interface, as far as I know on the old IDE interface there is a limitation of LBA 28 bits, which means that the laptop can only manage hard disks up to 128 GB.

• L50-A-10 q satellite: Win8.1 Pro Wi - Fi status LED does not

  Hello

  I have a laptop Toshiba L50-10-to-10 q running BIOS Version 1.30 and THIS Version 1.10.
  I've recently updated to Windows 8 for Windows Pro 8.1.

  I followed the update instructions found on the driver download page.
  All modules (Wifi, Bluetooth, etc.) and the function keys work just fine.

  However, the status LED does not work correctly.
  For Wifi, the status light is always off, even when the Wifi is turned on and connected.

  The State LED to the touchpad is also always off, even when it is disabled.
  SEEING supply and load indicator work fine.
  All the State LED worked correctly before the 8.1 update WIN.
  Is there a solution for this problem?

  Kind regards

  Niko

  Why you n t trying to update or reinstall the driver Intel WLan and driver of Toshiba system yet?
  Since this procedure has allowed to solve the problem of touchpad and I guess that that would solve the problem with the WLan light too.

  [Intel Wireless Lan Driver 16.0.2.1.0.s64 for Windows 8.1-64bits | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct = 7948 selSh 3983 = ortMod & language = 13 & selOS = 46 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 2 & ID = 88542 & OSI D = 46 & driverLanguage = 42]

• Receiver LifeChat ZX - 6000 LED does not illuminate.

  When I bought the camera it worked perfectly for a period of time over 2 years. Unfortunately I uninstalled the original however drivers.

  I installed the drivers that I could find for the Lifechat 1.4 which is supposed to work for my Vista Home Edition. I lost my CD so I can't use it. After installing the drivers Microsoft Lifechat appears in my programs under the control panel. I plugged the receiver in 6 different USB ports on my computer and the receiver LED does not illuminate indicating that it is not recognized. All 6 of these ports USB detects other material immediately.

  Is there a separate driver just to the receiver that may not be included in the Microsoft Lifechat 1.4? Any ideas as to why this is happening?

  Hello

  ·        You are able to use the Lifechat ZX-6000 on another computer?

  ·        You are able to use other USB devices on the system?

  I suggest you follow the steps mentioned in the article below.

  Troubleshoot failures to find the new LifeCam hardware

  http://support.Microsoft.com/kb/929087

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Satellite L650-12 q - Toshiba HDD Recovery does not

  Toshiba Satellite L650-12 q
  Windows 7 64 bit

  I am looking to re - install Windows using the Toshiba HDD Recovery software on my hard drive to restore the computer to factory settings.
  I followed the procedure to do this in the System Recovery Options, but received the following message is displayed:

  "The recovery of the operating system is impossible!
  Not found the HDD Recovery folder on the second disc of the first hard drive. There is no valid disk HARD recovery environment on this computer. »

  More details:
  Before you do the above, I supported the system and the files and folders using AOMEI Backupper. I then made the mistake of the merger of C: D: and E: partitions, E: contained HDDR files.

  After having tried the recovery above and receive the above message, I reinstalled the file system I had saved on an external hard drive, which resulted in a copy of the drive C: and E: drive with HDDR files.
  Unfortunately, when I tried to recover the operating system, the same message appeared.

  Then I tried to use a system restore disc, I had created a few weeks ago, but concluded that, for some reason that CD is empty.

  The good news is that the computer still works - slowly - and HDDR files seem to be still there, but for some reason, inaccessible.

  What are my options? I want to go back to initial factory settings so that I can go back and re-install the programs and files that I want to. (I backed up all my files and have records of installation for programs).

  If the worst comes to the worst and I have to buy a Windows 7 disc (if that's even possible - I don't want Windows 8), it would be possible to install on this computer and it would give me a clean install, without any of the garbage which is currently cluttering up my computer?

  Thank you for reading, and I would be grateful for any advice you can offer.

  In your case, the situation is clear: HARD drive recovery facility does not work?
  If you want to have the laptop with the settings you have an option only: for recovery image installation you must use the installation of recovery disc.

  If I understand right you don t, entitled?
  But you can order it on https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions do not hesitate to ask.

• Satellite L650-12Z: led does not light up when it is connected to the power source

  My L650 doesn't show the white light anymore when the cable is connected.
  The connectors are clean, and the adapter does not work.

  The laptop still works on the farm (when he was still in power in).

  Also without the battery, there is no white light indicating that the laptop is connected to the domain controller.

  Anyone know what could be the problem and how to solve?

  Hello

  Battery is charging while the AC adapter is plugged?
  Are you sure that the adapter is OK?

  If the battery would be charged correctly and if the laptop works ok, only connected to the power adapter (without the battery) the a problem with the frame of the LED may be possible
  But in this case only the technician must test these parts

• HP ENVY Sleekbook 6-1126sa - Mute LED does not

  Name of the product and operating system

  • HP ENVY Sleekbook has 6-1126
  • Windows 8.1

  Description of the problem

  • LED MUTE does not work/display
  • Nothing has changed I'm aware

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58502.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, close the laptop by holding down the SHIFT key when you click Shutdown to stop temporarily a boot hybrid.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the laptop.

  Kind regards

  DP - K

• Satellite Pro L40 - 15 c with Vista: WLan LED does not illuminate

  Hello

  I'm new on this.
  I have Satellite Pro L40 15 c with Vista operating system.
  Although I can access the internet via my WiFi connection, the orange LED on the front of the machine does not shine.

  He failed yesterday. All agross A a come before and all the solutions?

  Kind regards.
  Maurice.

  Maybe this helps:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=107665

  It seems she s question a Vista Atheros. Make a WLan driver and the update of Vista!

• MUTE button led does not

  Hello HP, I bought HP Pavilion 15 e015tx operating system windows 8 (64) bits. I upgraded windows 8.1and now my led Silence key does not work. But the mute works well. Please help me. My caps lock led + led wifi works well.

  Hello

  Download and install the driver Realtek HD Audio for Windows 8.1 on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63346.exe

  When the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Multimedia keys of LED does not

  I tried to click on my media keys of LED, but it does not work... supposedly, when I click on my movies main power media will come out but now it won't... I try to search in google on how to configure the multimedia keys LED... He told me to press the FN key... I tried to click FN... But nothing seems to happen... I use toshiba satellite A300...

  Hello

  Did you change your computer?

  (a) turn on your Toshiba Satellite laptop.

  (b) press the "Fn" key on your laptop keyboard, which should set up a line of icons at the top of your screen.

  (c) use the arrow of your keyboard and the 'Enter' keys or your touchpad to select the icon that has a silhouette of a person inside.

  (d) select the icon "settings". Although it is not labeled 'Settings' by name, it will be the icon at the far right of the screen that looks like an audio equalizer, four columns with sliders.

  (e) use the touchpad of your laptop Toshiba Satellite to select the list for the media playback button that you want to reassign.

  (f) label your media new button function by typing a descriptive word or phrase in the box "Description." Then, copy the location (see 'tips') of the program you want the media button to open the box of "path of the target.

  (g) press 'Save' to configure this media button based on your new settings

  I suggest you contact the computer manufacturing and check.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• HP-Pavilion g6 Mute button LED does not

  I have a HP Pavilion laptop g6 and I recently discovered that the LED on the button mute does not work, but the key works fine

  Help, please!

  Thanks in advance

  Hello all I had the same problem what I did was just go to (System) then (Device Manager) and then (audio, video and game controllers).
  Under there you will find a right click (IDT High Definition Audio CODEC) top and choose Update driver software and select (find the automatically...) MAKE SURE YOU HAVE INTERNET CONNECTION.

  This did the job for me, hope it does the same for you.

• DV7-4180us giving msg No. Boot Device or n, HDD, Win7 does not start.

  Well, I think I've reached the beginning of what may be a serious problem. I've been away for 9 months and my laptop had been stored in his bag all the time not used with the battery disconnected. I went 2 weeks ago and it had been fine until last Saturday. I started it upwards and once the logon screen Win7 and logging frozen inside, and the screen went black. I have it turned off and restarted, and then he came up with the error message "No. Boot Device" as if Win7 is no longer installed. I ran several virus scanners and they came back without anything, I'm sure that this is not a virus, I mean I have not yet downloaded something long because before my departure other than all of the updates, I missed. I tried to reset the BIOS to factory default and use PC tune-up AVG to fix all the errors, but I'm still having this issue.  Funny, it is sometimes the laptop runs and sometimes it won't so I think this load default Win7 will progressively get worse? Not really sure cause I'm not very technical with laptops.

  I tried to run the test drive in the BIOS when it does not load, but it is just like "No hard drive detected" every time, but it passes the test of memory.

  The reason why I'm here is to know what are my options to resolve this problem, so far the only thing that I can think of is to replace the HARD drive and reinstall Win7 but I want to make it as painless as possible, or see what others can suggest.

  I have no disc for reinstallation of Win7 or any similar to disks. My laptop is out of warranty. I know that I have the Local disk drive (c :)) and also the recovery disk (D :).)  My hard drive is a TOSHIBA MK6465GSX.

  Some of my questions are when I take off the Toshiba HDD that will of course remove the (C :) drive BUT it will also delete my recovery disk (D :)? * see link below for what players I have *)

  http://img255.imageshack.us/img255/315/compcx.PNG

  Should I replace the HARD drive I have to reinstall Win7 correct?

  Hello

  A safe and fast way is to clone your HARD drive when it is until running, it means you have the same OS, drivers, software. All you need is the same size or more (capacity) of HARD drive and cloning software. You can find some free cloning software in the following list:

  http://DownloadSquad.switched.com/2008/09/05/5-free-apps-to-clone-your-hard-drive/

  I hope this helps.

• LED does not not on my mousepad?

  Can someone help me?

  I use a HP Pavilion dv6 Notebook PC and recently noticed that my LED stopped working around the outside of this mouse pad.

  The mouse pad works fine and can use all the gestures etc but as the glow out of the trim around...

  You can heck the pad by double clicking on the small button on the left corner and turns amber lit... but that white does not illuminate when it is in use?

  Can someone give me some ideas why?

  Hi Shorty86,

  Yes at this point I think it's a hardware problem. You can reach HP Total Care at 1-800-474-6836 in North America or Start here if you live outside of North America.

• X 201 WLAN LED does not blink. Is this normal?

  Hello, I just got a ThinkPad X 201 (this is my third ThinkPad). As expected, this is a great machine and I'm pretty impressed with its performance, despite its size.

  However, I noticed that the WIFI does not blink - my two other ThinkPads done - it. Is this normal? I have not noticed any problems with conectivity.

  Also, I am interested in the WWAN upgrade (this machine is expandable WWAN). The maintenance manual contained the F3507g Ericsson as a proper map. I'm lucky to have this one in my other ThinkPad, but when I tried to install the X 201 rejected saying its not allowed. How can I find out what other cards listed in the manual is really compatible with the model?

  WLAN-LED:

  1. Run regedit
  2. GoTo HKLM\SYSTEM\CurrentControlSet\Control\Class
  3. Search from there for your wireless network card f.ex "6200 agn' (see in Device Manager)
     As search result you will get for example:
     "\0007 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E972-E325-11CEBFC1-08002BE10318}.
     You will find additional keys like "DriverDesc", "DriverVersion", "Ada" etc.
  4. Create a RegDWord named 'LedMode '.
  5. set its value to one of the following:
  • 0 = always off LED
  • 1 = led on and blinks then that traffic
  • 2 = always on LED

  deactivate and activate your WLAN device in Device Manager.

  On some Thinkpads "LedMode" - entry is missing - so it must be created manually