HDD upgrade Satellite 1410 604

Hi all

I have Satellite 1410-604 and the HARD drive is really broken (about 1/3 of the blocks are wrong, according to MHDD and a strange noise is coming from the drive). I have another Toshiba HDD from another laptop. This spare part is a MK2018GAP (20 GB, 4200 RPM) while the original HARD drive is a MK3018GAS. I am very surprised by the fact that my laptop cannot detect even the 'new' drive of 20 GB, despite the fact that is also a part of Toshiba, of same rpm with original HARD drive and less capacity.

This disc HARD MK2018GAP came from other non-Toshiba laptop and was replaced because the owner wanted a faster drive (7200 RPM). I am sure that the MK2018GAP works well. Can someone help me please? Why my laptop can't see the 'new' Toshiba disk?
It makes account "no HDD" in the latest version of the BIOS (1.40) I.

PS: Above all, can someone tell me if the laptop can accept a new 60 GB 7200 RPM HARD drive? I want to buy one, but after this failure, I fear that my laptop does not detect it.

Hello

It s very strange because the MK2018GAP supports the 20 GB drive HARD Ultra-DMA100 and interface (ATA-2/ATA-3/ATA-4/ATA-5).
Satellite 1410-604 also supports the ATA-5 interface.

So usually the HARD disk must be recognized by the BIOS. I have only one explanation. The HARD drive is a bad master/slave. I m not 100% sure how the HARD drive should be set on works properly on this laptop, but you should check the settings on the old original HDD to book you.

I also found the compatible sizes of HARD drive: 20 GB, 30 GB, 40 GB HARD disk 60Go should work.
For example, the TOSHIBA MK6021GAS HDD 60 GB and 4200 RPM is compatible.

I would like to say a few words on the speed RPM HARD drive. The 7200 RPM is very fast and usually the Satellite was delivered with 4200 or 5200 RPM hard drives. The highest speed could produce more heat, which could increase the temperature inside the laptop.

Tags: Toshiba

Similar Questions

  • Satellite 1410-604: WiFi disappeared from the Device Manager

    On my Satellite 1410 604 wifi seems to be dead. Don't turn on. FN + F8 does nothing and it is not even in network adapters in Device Manager.
    Any suggestions?

    Hello

    Did you use Wireless LAN in the past?
    I ask because the wireless LAN optional on this unit and you must upgrade first the unit with the minPCI wireless LAN card to work with WLan.
    Have you installed the card?
    This info is very important because I don t know whether or not there is a Wlan card.

    Good bye

  • Type of Panel LCD Satellite 1410 604

    I wonder what type of LCD Panel has been used in this particular model?

    Hello

    Googling around, I found the track information:
    Satellite 1410 - 604 a
    Display Type TFT color LCD
    Size (diagonal) 14.1 "
    Resolution 1024 x 768
    Contrast 150:1
    Operating factor
    Speed of response
    Increase of 20ms
    Fall 30ms

    Do you need just this info or perhaps the replacement part number too?
    Don't display on your defective satellite?

  • Satellite 1410-604-BIOS update > update BIOS Incorrect in the web?

    Hi there again!

    Now with a new and strange issue.

    We all know that tell old... "If it does not break, don't fix it." And if you put in more computer terms, "especially if it's a BIOS.

    Yes, we all know that the BIOS is something quite dellitate to manage. For some reason, we normally feel as if we manage something like nitroglycerine, or radioactive products. And it's because we all know who is put at risk at the moment: our (or sometimes other) computer, the whole system could end up as dead as some pieces of metal, plastic and son.

    Well. I passed through all of this, more than 10 times in my life, and only once, it went wrong. But since this old motherboard was already dead, it was not important. But I've always been EXTREMELY care. Allways cross checked everything before you do anything, allways has a backup and a way to allways and restore that backup... I did COMPAQ systems, which have been prepared in this way. A BIOS update was about about a disc, turn on the PC with the disk in the floppy drive and wait. And if you don't like the results, you just click on 'back to a previus BIOS' and that was it... very nice. And easy.

    A few days ago a friend gave me a Toshiba Satellite 1410 604 to solve some problems that have been her crazy. After you remove a Norton Internet Security has expired, install avast and scan, I found more than a hundred of files infected with a variety of viruses, malware, trojans, and everything you could imagine. Avast all removed, but the rest of the operating system was so unstable that we decide to format it and install from scratch.

    I asked for the restore disks, which obviously it failed because they were lost in one of his trips. After that we had confirmation of Toshiba representatives there is no disk recovery available for this model, because it is too old, we decided to install from scratch like any other normal PC and resigned to losing some of the utilities accompanying that CD and are not available for download on the Web site.

    I downloaded all the software available for this model, including two updates to the BIOS. (In reality an update, but in two versions: Windows and traditional) and prepared a CD with all the drivers and programs as if it were a new system installation. And everything was fine, no problems at all. Until we arrived at the wireless LAN card, but that's another problem is already solved (the mini PCI card for the WLAN does not support the encriptación WEP or WAP, and it is not possible to connect to any LAN encripted wireless).

    At this point, and when I started setting up and activation of peripheral PCMCIA and USB devices (this computer only supports USB 1.1, 2.0 not) I discovered this text from Toshiba Web site:

    "This Bios update adds functionality to your system.
    (BIOS stands for Basic Input and Output System. This program is stored in a chip memory dead on the motherboard.
    When the computer comes on, the BIOS is launched to perform various functions to start.)

    For more detailed updated information, please refer to Information update BIOS Toshiba"

    (you can find it here):

    [http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU], you need to search for:

    Archives
    Satellite
    Satellite 14xx
    Satellite 1410 604
    PS141E

    Quite specific. Isn't?)

    According to the information in this Web site, the available BIOS fits the following models:

    "Satellite 2410 414, Satellite 1410, Satellite 1410 - 654S, Satellite 1410 814, Satellite 2410-303, Satellite 2410-304 s, Satellite 1410 354, 2410-601 Satellite, Satellite 1410-401, {color: #ff0000} * Satellite 1410 604 * {color}, Satellite 2410-404, Satellite 1410-301, Satellite 1410-304, Satellite 2410 S403, Satellite Pro 2100, Satellite 1410 S203, Satellite 2410-304, Satellite 1410 554, Satellite 1410 S102, Satellite 1410 - 354F, Satellite 2410 703, Satellite 1410-303, Satellite 2410 - S203, Satellite 1410-801, Satellite 2410 603, Satellite 1410-902. ', Satellite 1410-313, Satellite 1410-802, Satellite 1410 714, Satellite 2410-354, Satellite 2410 514, Satellite 1410-614, Satellite 1410 704, Satellite 2410 515, Satellite 2410-504, 2410-702 Satellite, Satellite 1410 S103.

    Yes... it's here!

    Now when you go into the "Toshiba BIOS update information", you get:

    "Ref. FAQ: TRO0000000b07.

    A BIOS update is a {color: #ff0000} * operation is relatively simple and can be done by computer more competent users * {color}. All BIOS updates can be obtained from "BIOS update" Section download click here...

    Note: the BIOS files are specific machine the correct BIOS for your machine should be used. »

    Please note that Toshiba does not disencourage BIOS manipulation, on the contrary: they even encourage people to do. It is not badly needed, but at the same time that they encourage people to 'play' with such a delicate question, at the end of this page, in small letters, they say:

    "Toshiba provides this information"as is"{color: #ff0000} * without warranty of any kind * {color}, explicit or implied, including, but not limited to, the implied warranties of quality market or adequacy has a specific use." Toshiba shall not be liable to the topicality, accuracy, completeness or quality of the information provided. {color: #ff0000} * Toshiba is not responsible for damage caused by the use of any information provided, including incomplete or incorrect information * {color}. »

    This should trigger yellow alarms in our minds.

    + "Human error is inherent in man, and it is not possible to eradicate. It will be displayed always, sooner or later"(Prof. James Reason). +

    And finally, I made the mistake. Although I have read this warning, I remembered all these successful BIOS update with COMPAQ and relied for Toshiba. This update was available there, and Toshiba told me that it was for this computer. Great!

    So finally, I disconnected all devices (USB), removed the PCMCIA (WLAN), plugged the battery charger to avoid any possible battery problem, restarted windows, and then Windows started the update (windows version, such as recommended by Toshiba). This drug looked very nice, nothing different from what I usually see on these old COMPAQs.

    As reported by the update program, the system would restart. And in fact he did.

    Windows normally closed (a little faster than normal, but without mistakes, and since there is no other programs that most - even the antivirus not working - no), the computer turned off, all lights (normal) offshore, and then again on...

    {color: #0000ff} * BEEEEEEEEEEEEP... BEEEP... ... BEEEEP * {color}

    OMG! I never movement something SO bad. 3-1-1!

    And now... What a 3-1-1 is here? Award BIOS would mean no card graphics or video deffective card, but it is not true, because it worked 20 seconds ago. There are BIOS.

    He never came again to life. He's still 3-1-1 beep.

    But now comes the investigation on the human factors involved in this accident.

    I found I committed the following errors:

    * (1) * rely in the constructor, even if they have WRITTEN their information may be incorrect or incomplete. (BAD if I was a detective QA & QC).

    * (2) * I cross checked deep enough (until it was already too late).

    * (3) * I haven't looked above for how to make a backup of the BIOS to restore must anything deceive you.

    * (4) * let Toshiba lead me to a path that I didn't walk, just because of their supply of 'increased functionality.

    * (5) * Beleave in Toshiba when they said "relatively simple operation and can be performed by the most competent computer users"... they never said it is infallible. "."

    Then I began the most interesting part of the investigation.

    {color: #0000ff} * "what went wrong?" * {color}

    Obviously, the update of the BIOS has not somewhere, somewhere. And I wanted to know what and where.

    First thing, I discovered that there is another Toshiba search engine called "askiris" ([http://askiris.toshiba.com]) and I looked to see if, for any chance I could get the old BIOS 1.20 version which was installed at the origin of this machine.

    And I found something... VERY interesting:

    Bq. {color: #800080} * of: *------{color} {color: #800080} * ACPI BIOS Flash version 1.10 for Satellite 1410/1415/2410 *------{color} {color: #800080} * bios for these models. SHUT UP. Downloads. DL. 289838 289838 105481 ACPI BIOS Flash version 1.10 for Satellite 1410/1415/2410. 2002-10 - 04 105589... *------{color} {color: #800080} * published 04/10/02 *------{color} {color: #800080} * of: *------{color} {color: #800080} * ACPI Flash BIOS version 1.40 for Satellite 1410/1415/2410/2415 *------{color} {color: #800080} * FDD Version 1.30 shut UP. Downloads. DL. 357972 357972 105481 ACPI BIOS Flash version 1.40 for Satellite 1410/1415/2410/2415. 2003-01 - 31 105589 PUB... *------{color} {color: #800080} * published on 31/01/03 | Rating: *------{color} {color: #800080} * of: *------{color} {color: #800080} * ACPI BIOS Flash version 1.20 for Satellite 1410/2410 *------{color} {color: #800080} * error message when the BIOS TAIS. Downloads. DL. 305240 305240 105481 ACPI BIOS Flash version 1.20 for Satellite 1410/2410. 2002-11 - 01 105589 PUB... *------{color} {color: #800080} * published 01/11/02 | Rating: *------{color} {color: #800080} * of: *------{color} {color: #800080} * ACPI Flash BIOS version 1.30 for Satellite 1410/1415/2410 *------{color} {color: #800080} * 1) changed the content be QUIET. Downloads. DL. 330963 330963 105481 ACPI Flash BIOS version 1.30 for Satellite 1410/1415/2410. 2003 01 - 03 105589... *------{color} {color: #800080} * published on 03/01/03 | Note: * {color}
    These are: V140, V110, V120 and V130 for 1410/15 and 2410 series.

    GOOD! Or not?

    Let's take a look:

    First thing I did was download all four files.

    Then I took the same version that made the accident: 1.40

    I unzipped the file, which I found:

    2009-06-05 00:17 < DIR >.
    2009-06-05 00:17 < DIR >...
    31/01/2003 08:38 11410v14.iso 1 605 632
    31/01/2003 08:38 511 764 14 1370. EXE
    {color: #ff0000} * 01/08/2003 17:03 2410a9v140.exe* {color 724 480}
    01/09/2003 09:32 250 663 biofca9t.com
    10/08/2002 05:26 30 697 chgbiosa.exe
    31/01/2003 08:36 1 087 instinfo.bat
    2002-05-13 15:25 378 175 launcher.exe
    31/01/2003 08:36 433 launcher.ini
    2009-06-05 00:17 0 list.txt
    31/01/2003 08:36 14 768 readme.com
    * {color: #ff0000} 31/01/2003 08:36 12 513 readme.txt {color} *.
    11 archivos 3 530 212 bytes
    3 dirs 9,404,600,320 bytes free

    And I got my first surprise here: there is a {color: #ff0000} * README. TXT * {color} that was not present in the file that I downloaded earlier from the repository of drivers.

    So I went the readme.txt and I found this:

    'README. CDC TXT 31/01/2003
    Flash BIOS version 1.40 for Satellite 1410
    -----
    This BIOS is applicable for the following models:

    Satellite 1410-S105
    Satellite 1410-S106
    Satellite 1410-S173
    Satellite 1410-S174
    Satellite 1410-S175
    Satellite 1410-S176
    Satellite 1415-S105
    Satellite 1415-S106
    Satellite 1415-S115
    Satellite 1415-S173
    Satellite 1415-S174
    Satellite 1415-S175
    Satellite 1415-S176
    Satellite 2410-S203
    Satellite 2410-S204.

    Please note that the model 1410-604 is * NOT * listed.

    I thought ' well, there must be another archive... ". »

    But then I realized a name that seems familiar, that is, in the directory where I unzipped this file 1.40, and the name is:

    {color: #0000ff} * 2410A9V140. EXE * {color}

    So I took the other file, the update of BIOS_Win, and I discovered that the name of the file is:

    * {color: #0000ff} 2410A9V140. EXE, {color} * (Ups!)

    So I once again, uncompressed to find:

    El volumen of the D unidad no tiene etiqueta.
    El n£ series volumen del mero are: 8838-E175

    Directory of D:\Shared\diskette\2410A9v140

    2009-06-05 00:43 < DIR >.
    2009-06-05 00:43 < DIR >...
    * {color: #0000ff} 01/09/2003 09:32 _250, 663_ BIOFCA9T.COM {color} *.
    2002-07-17 03:38 biosupd2.ini 35
    13/07/2001 13:22 6 277 chgbios2.vxd
    * {color: #0000ff} 10/08/2002 04:26 697 _CHGBIOSA, 30. EXE, {color} *.
    11/09/2001 09:14 134 clean2.reg
    2002-07-17 03:35 342 064 install2.exe
    2002-07-16 06:55 241 664 nchgbios2.exe
    18/08/2001 11:41 3 435 nchgbios2.sys
    23/10/2001 18:55 11 476 nchgbios2NT.sys
    26/08/2001 09:00 49 152 nchgbios2svc.exe
    13/07/2001-17:05 49 152 tbdecode.dll
    2002-03-14 06:42 49 152 TCHGBIOSInfo.dll
    2002-06-21 11:25 1 796 tosclean2.bat
    11/09/2001 12:01 967 tosclean2.pif
    2002-06-21 11:34 toscleanAUTO2.bat 1 841
    2002-06-21 11:44 toscleanSMS2.bat 1 796
    2002-06-21 08:51 2 038 tosntclean2.bat
    2002-06-21 08:51 2 084 tosntcleanAUTO2.bat
    2002-06-21 08:52 2 038 tosntcleanSMS2.bat
    Archivos of 20 bytes, 1 046 461
    2 dirs 9,402,793,984 bytes free

    No readme file...

    Then another issue raised in my mind: what happened to the other file 1.40? What did the other 2410A9V140. EXE are inside?

    This:

    El volumen of the D unidad no tiene etiqueta.
    El n£ series volumen del mero are: 8838-E175

    Directory of D:\Shared\diskette\comparacion_toshiba\askiris\241 0a9v140

    2009-06-05 00:46 < DIR >.
    2009-06-05 00:46 < DIR >...
    * {color: #0000ff} 01/09/2003 09:32 _250, _BIOFCA9T.COM {color} * 663
    2002-07-17 03:38 biosupd2.ini 35
    13/07/2001 13:22 6 277 chgbios2.vxd
    * {color: #0000ff} 10/08/2002 04:26 697 _CHGBIOSA, 30. EXE, {color} *.
    11/09/2001 09:14 134 clean2.reg
    2002-07-17 03:35 342 064 install2.exe
    2002-07-16 06:55 241 664 nchgbios2.exe
    18/08/2001 11:41 3 435 nchgbios2.sys
    23/10/2001 18:55 11 476 nchgbios2NT.sys
    26/08/2001 09:00 49 152 nchgbios2svc.exe
    13/07/2001-17:05 49 152 tbdecode.dll
    2002-03-14 06:42 49 152 TCHGBIOSInfo.dll
    2002-06-21 11:25 1 796 tosclean2.bat
    11/09/2001 12:01 967 tosclean2.pif
    2002-06-21 11:34 toscleanAUTO2.bat 1 841
    2002-06-21 11:44 toscleanSMS2.bat 1 796
    2002-06-21 08:51 2 038 tosntclean2.bat
    2002-06-21 08:51 2 084 tosntcleanAUTO2.bat
    2002-06-21 08:52 2 038 tosntcleanSMS2.bat
    Archivos of 20 bytes, 1 046 461
    2 dirs 9,402,781,696 bytes free

    * {color: #ff0000} they have two 20 files and 1 046 461 bytes. I asumed that they are the SAME two folder {color} *.

    And the readme file does not list the model 1410-604 in its readme file, so I can't explain it except as a Toshiba error. * {color: #ff0000} they put an incorrect BIOS on their website and has proposed updating and somehow lead to such mistakes. {color} *.

    (Except in the case that one of these models is a name that is different from the model 1410-604, and if that's the case... now I don't know why this BIOS do not work with this computer).

    The worst thing is that neither the other files (V1.10, 1.20 and 1.30) lists the 1410-604, apparently so no solution possible workaround for this problem. I need an original v1.20 to the CMOS, and Toshiba seems to have. They offered me to solve the problem, leaving the laptop to an ASP, and pay only € 95 for the work and about € 280 for a motherboard replacement, I will get it resolved. But they offer no guarantees of their possibilities because is a model "too old" and "abandoned" and "unsupported"...

    In other words, they said 'you don't have to bother with it, just go and buy a new' (something of quite out of my reach in this time of crisis): P

    Thanks for reading so far.

    Now, what I need is to get ideas on a work around for this, my ideas are:

    (1) the CMOS has some startup that works (it allows a roll-back if you have the appropriate file). So I need a good BIOS to burn in the CMOS memory, the SAME SAME model (a backup BIOS) but the backup should be sufficient for the burning program (CHGBIOSA.COM).

    (2) it is always possible that the BIOS might be OK, but the CMOS data has been corrupted somehow. If so, the CMOS of compensation could solve problem. But I wasn't able to find a clear cmos from the outside button, and after disasembling I took battery, with no good result. I try to leave the MOBO without battery for a period more long (I left it about 20 seconds) just in case where 20 seconds are not all capacitors for well pass zero values. I don't have a lot of hope in this point.

    (3) try to get a REAL good update from Toshiba. I contacted technical support several times, and I was able to verify that they are only - phone operators, with a script in front of them, and when the problem is going - out of reach, they fall in the same response: "you must go to an ASP. I still have a faint hope to find someone who really knows a little and could illuminate with a good BIOS in this disc.

    (4) as far as I could find, this BIOS is not any BIOS-manufacturer known. It seems that it has been developed by Toshiba (own brand), so the Phoenix crisis recovery disk won't be of any help here. As well as any other BIOS recovery tool not designed for Toshiba BIOS. But I'm open to all ideas, which could be put to the test more or less safely. (Remember that the 'BIOS-BOOT-PART' feature still works, I don't want to lose that possibility alone of redemption).

    Wwwaaaaoooowww... what a falks long post! Sorry about that!

    Forgive me, but I wanted to be really clear.

    Someone give some tips or advice will be greatly appreciated.

    Please don't say that I shouldn't be doing... I already know that. I already did some research and found my mistakes, not to repeat them. Now, I need to spend, to move and to try to solve this problem, or at least learn to solve similar things. As much as possible.

    Thank you once again, in advance, and sorry again.

    FenixDigital

    Post edited by: Fenix_D
    Modified subject to beter reflect what the problem is (apparently erroneous file BIOS in Toshiba Download Center).

    Hi Fenix,

    Wow... He tooked a lot of time to read your post...

    Maybe I can help you.

    The Bios in the website is the right one. If you have downloaded the right version of the Bios.

    Toshiba America, which has most of the time the Askiris you used isn't accurate models for Toshiba Europe.
    This should be the reason, why does not the readme file contain the European model.

    I'll try to do an update of the fresh Bios using the update of the traditional Bios.

    Copy the files on the disk, put it in the floppy drive, press and hold power on the notebook tab.
    After that the laptop is off, press on and hold the key on the left side of space power on the laptop new bar and wait until it turns off again.

    If your laptop does not power perhaps the most, the RAM is default?

    Therefore, if the use of the traditional Bios or change memory doesn't help, and your laptop is still dead you should go to a SPA, but it will cost money.

    I now have my fourth Toshiba laptop and I had never problems with the Bios updates.

    The 1410 is very old I think, so before you go to a SPA, I'd buy a new ;)

    Best regards

    Maurice

  • Satellite 1410-604 - get wirless to work

    Hey there, I seem to have a problem with my Satellite 1410 604, I got the Briefcase "Toshiba WirelessLanDriver" of the cd as he said it, I followed the instructions, but yet he says that the .msi file is that contains no information about the pilot for some reason I can't get my wireless to work on this pc.

    Any suggestions on how I do it?

    As far as I know, this is an old series and I could not find any help on a toshiba Web page. so now im going to try out this forum and see if anyone has a suggestions...

    Kind regards.

    Klattrup

    Hello

    As far as I know the Satellite 1410 604 was equipped with WiFi, but it's optional.
    So maybe your portable computer does not support the wireless network adapter and the WiFi network is not integrated.

    Please check first of all in Device Manager if there is a yellow exclamation mark under network adapters, or if the WiFi card is recognized.

    If this isn't the case, then this would mean that the WLan card is not in.

  • Re: Touchpad XP driver for Satellite 1410 604

    I'm looking for the * touchpad driver * (Windows XP Pro) for the Toshiba * Satellite 1410 604 *.
    This model seems unknown to the download site.

    Does anyone know what other (known) model, it is or where I could find a compatible driver?
    ----
    Is there a utility program to test the functioning of the touchpad?

    Because it is an older series of satellites, all the drivers have been moved for ARCHIVING on the European driver Toshiba :) page

    * Check the ARCHIVE-> Archive Satellite-> Satellite 14xx-> Satellite 1410-604 *.

    Easy ;)

    See you soon

  • Satellite 1410-604: DVD/CD-RW burn CD or DVD read

    I have a Satellite 1410 604 with DVD/CD-RW. The disk drive will be reading/read CD but won't burn CDs or DVD. Someone at - it a solution or should I get a new hard drive?

    Hello

    Burn you the DVD in the past?
    I found an info that the drive that came with this device can only use a CD-ROM to CD-R(read/write), CD-RW(read/re-write).

    In this case, it is not possible to burn or read DVD. Also, I guess you tried to burn a CD + media. Please do not forget that you are using compatible CD.

    Good bye

  • Satellite 1410-604: I lost the screen saver and power management system

    I have a Satellite 1410-604. I lost my screensaver and cannot access the Toshiba power management system: I click and nothing happens. I saw a suggestion to run the system restore. When I go to system restore it says it is running, but is there something more specific that I can do?

    Thank you!

    I put t know what you did with your operating system, but more often if the system restore option enabled, then it shouldn't be a problem to restore the operating system to the beginning
    Simply, start the system restore and choose the starting point that was automatically created.

    I also found this useful FAQ:
    http://support.toshiba-tro.de/KB0/TSB6B01MB000BR01.htm

    What about installation? Have you created an image?

  • What spec RAM required for Satellite 1410 604?

    I want to have 1 GB... but I don't know what kind of memories this model suppport...?

    Hello

    You can use the simple PC2100 200 pins (266 MHz) DDR SODIMM memory modules on your Satellite 1410 604
    The laptop is expandable up to 512 MB and that's why you can use only 2 x 256 MB

    PS: Please check this site of memory modules:
    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=6030&ft=m&St=3

    You can find the right parts

  • I want to install the new HDD for Satellite 1410 303

    Can I install the MK8032GAX HARD disk (80 GB Toshiba 2.5 "IDE, 5400 RPM, 16 MB) on my Toshiba Satellite 1410 303? BIOS will detect it?

    Unfortunately there no document on this subject because the HARD drive upgrade is dealer so-called option, and because of this, there is no specific info on the upgrade of the HARD drive. According to the specifications of the laptop, this laptop model comes with 20 GB of HARD drive.

    I'm sure you can use 40 or 60 GB without any problems. About 80 GB I won't speculate, but maybe someone has already tested and will post here in the next few days.

    Good luck!

  • Unable to connect by Satellite 1410 604 to WLAN when enabled WEP in

    Hello!

    Well, all I was looking for this forum, but I was not able to find what is happening with this computer.

    News of the laptop:

    Toshiba Satellite
    Model: 1410-604
    Installed wireless network adapter:
    Toshiba Wireless LAN Mini PCI Card
    Texas Instruments PCI-1410 CardBus Controladora

    From what I could find so far (the laptop is not mine, I'm helping a friend to get solved this problem) this card supports the standard 802.11/b. This should not be a problem, because the A / P supports 802. 11b standard.

    Anyway, there is absolutely no way to get the laptop connected to the WLAN...

    Or, to be more correct: it does not connect to the WLAN when WEP encryption is enabled (WEP or WPA give the same thing: it seems to get connected, but never address IP of DHCP), but this drug is going very well, if I turn off the WEP encryption.

    The worst is that the installed drivers don't support almost any configuration. Advanced configuration supports the following:

    1. the station name
    2 channel
    3 speed transmission
    4. power management card

    In addition, the card doesn't have any network manager (as others have, where it is possible to adjust some settings and ensure that WEP is used properly).

    I don't know what is happening here. I wasn't able to get the card working in Windows XP and or in LINUX (knoppix, ubuntu and xubuntu I tried).

    I'm starting to think that this has to do with the card and it is the inability to work under encriptación WEP or WAP (it works OK in open WLANs), and I do not see how to solve this problem.

    It seems that there are no newer drivers than what I (downloaded at Toshiba),
    I don't know if an update of the BIOS, will probably not solve.

    The card is maybe just too old... but if I'm not wrong... It should work. Shouldn't it?

    All ideas are absolutely our guests!

    Best regards

    Fenix_D

    Hello

    It seems that this map was made by Agere (it comes to WLan driver appearing on the Toshiba page).
    The INF file provides a few details and the driver appear to come from v7.42.0.300 19/12/2001

    However, the encryption WEP or WAP is features material and if the equipment (WLan card) does not support this then an update of the driver would not help you!

    But what you might check is the option in the Device Manager-> card Wlan-> properties-> Advanced tab
    Usually, there is all necessary settings and if the encryption would be supported then you should find it there.

    If this doesn't help then I advise you to buy a USB WLan stick who favour more recent ciphers

  • Need to get software for old Satellite 1410-604

    Hello

    I'm looking for the original software for my Satellite S1410-604 because:
    now, I work with w7, but I'm not satisfaction in this regard. I want a lot
    back to the standard software on this laptop win xp.

    Can someone help me with this?

    This Satellite is very old, then you will not be able to order it directly by Toshiba.
    What you can try is to contact the nearest Toshiba service provider in your country. Maybe they have some local archives with the old recovery disks and you can get a copy.

    Otherwise, you must install the clean version of Windows XP Home edition. All the necessary drivers, tools and utilities that you can download from the Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  • What wireless network card Mini-PCI can I install on Satellite 1410 604

    Hello

    What types of cards Mini-PCI can I install in this laptop?
    There is information in the user manual, this Satellite 1410 minipci location is compatible with Type III A.

    Will this card http://www.gigabyte.com.tw/Support/Communication/FAQ_Model.aspx?ClassValue=Communication&ProductID= 985 & ProductName = GN-WI01GS work to insert it?

    I have goggled a bit and found a XG - 601 802. 11 b / g Mini-PCI WiFi 54 Mbps card.
    According to the description of this map is a Type III interface supported A 32-bit.
    The Intel PRO/Wireless LAN 2100 3 card Mini PCI also supports an IIIA interface.
    These are one of the first Wlan miniPCI cards that have been designed for the use of Wlan and support several protocols of Wlan

  • Satellite 1410-604-Question on the maximum size of HARD drive?

    Hey.
    My hard drive in my Toshiba s1410-604 died :(
    How many GB does my phone support?
    Can I buy a 100 GB HDD without any problem?
    I have this drive in my mind:
    http://www.edbpriser.dk/Listprices.asp?ID=139375

    Hope someone can understand my question and help me...

    Hello

    As far as I know, this unit was delivered with a 30 GB HARD drive.
    In my opinion you unity might work with a 40 GB 60GB but I n t think that the BIOS recognizes a 100 GB HARD drive.
    I think that it of not possible to use a 100 GB on this unit.

    HARD drive merchants offer a BIOS change. After this change, it should be possible to use a bigger HDD. But these procedures are not supported by Toshiba and it is possible that you will lose coverage.

  • New HDD for Satellite 1410 303

    Hi, I need to change the disk HARD-1410-303 can someone tell me the max capacity and how physically change the hd on this laptop?
    I indetified HARD disk location, but I don't understand how to disconnect the HARD disk.

    Thank you and sorry for my English

    Hello

    As far as I know, the machine was delivered with 20 GB of HARD drive.
    After a long search I found a 100 GB HARD disk for this device.
    I think that there is a maximum size.
    Check this box:
    http://www.Kahlon.com/rm30859_Toshiba_Satellite_1410-303.html

    Also it is not very difficult to replace the HARD drive. On the site from the bottom of the laptop, you can find the cover of the HARD drive. You must remove it. As far as I know it s a single screw. Then you can remove safe HDD form Bay.

    Best regards

Maybe you are looking for

  • "Repair of battery" after 200 cicles (macbook Pro 2011)

    Hi, I have a Macbook Pro from mid-2011 and after around 200 cicles, he says "service battery", but the battery works perfectly well, of course it takes only 2 hours or less because it is already 5 years (and we all know that it is a complete lie that

  • Firefox redirects pages

    I had this problem for a few months and thought I had found a solution when I looked in the forum and the proposed solution was to go to 'options', 'general' and 'Advanced' and uncheck the option "warn me when websites try to redirect or reload the p

  • HP Laserjet P1102W wireless connection problem

    I have a P1102W which worked very well up to what it wasn't wireless.  I use an AT & T Uverse 2Wire router and Windows Vista.  I have not changed anything, and one day the network would not recognize the wireless printer.  I've turned off (unplugged)

  • More urgent Skype is unable to make phone calls to any number in Pakistan

    Hi, for the last 15 days trying to call on mobile networks pakistan 4, no Pakistani network mobile phone or any what land line passes through, what happens, Skype is banned in pakistan or what? I was in South Africa and I was calling from there but n

  • HP Officejet 6500 has more by using a different IP address than before

    I have a HP Officejet 6500 has more. Until yesterday, the printer worked wirelessly with my Mac OS 10.6.8 using the same IP address in IPv4 as the computer. I ran the HP Network Config page and it shows an IP address different today that it did. Is t