HDMI as input?

Similar Questions

• Several digital audio HDMI output inputs TV

  With several HDMI on KDL37XBR6 inputs and using the output to an input of digital audio receiver, how does TV know what audio signal to send to the amplifier?

  Hello

  Welcome to the community of Sony!

  The TV will be the audio signal to the input device selected in the receiver.

  If my post answered your question, please mark it as an "accepted Solution".

  Thank you for your message.

• C40 - using a HDMI 2 input

  I have a C40 with double screen connected to two televisions sharp 80 "and a Smartboard projector.  Concept design is TV 1 (end) video and content delivered to TV 2 and SmartBoard with the source or the other being a portable instructors or a document camera.  If I connect the laptop HDMI output at the entrance of the C40 HDMI 2 and I also connect a document camera out DVI to DVI C40 in, is there a way to select the source in order to display the content?

  Yes, you can select the source of presentation you want in the menu or by pressing and holding down the presentation button, which will give you the same options you get when you go through the menu. See the attached screenshots. This is assuming that you have configured sources, see "source.gif.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• Change the input s-video tv to hdmi

  Anyone know if you can change the input s video cable tv to use the HDMI input to watch TV on the Touchsmart 600-1050? The s-video works fine, but I thought I read somewhere that you should be able to use the HDMI as input source. So how to change the tv tuner to use HDMI instead of the S video cable? Thank you.

  There is a toggle button on the back just above the HDMI port that allows to move forward and backward.

• Output HDMI not working only not with 200 under ICS

  Hello

  I plugged the HDMI to a Sony KDL 32 E 5500. It simply doesn't get it.
  The same HDMI TV input works fine with DVD player.

  200 tablet is under ICS (upgrade in France).

  I tried two HDMI configurations: full screen and the video window.

  Should I send it for repair?

  Hello

  There are two outputs: mirror and video area only.

  Mirror:
  External device copies the image on the screen of the Tablet

  Video area only:
  The external display device shows the reading when open a multimedia

  But you should first check the Android settings:
  Under the option from the screen, you will find the video mode of the HDMIO option
  Press to switch between HDMI video output mode.

  You can also try to connect the HDMI device under the following conditions:
  -Tablet is turned on
  -Tablet is completely off
  -When you connect the TV or a monitor external to the HDMI port, then output display is set to HDMI
  -When you connect and reconnect the cable, wait at least 5 seconds before you reconnect the HDMI cable.

• Toshiba 22L1334G problems with HDMI

  First of all, thanks to all for trying to help me :)

  Now let's make the problem: I bought this TV yesterday and I immediately connected on my PC (video card AMD R9 270 X) with an HDMI cable (the cable is Rev. 1.4 and less then 1,5 m).

  The global definition is very good, but I have in fact 2 problems:
  first of all, the colors are very saturated and can't do their natural even if the video card values.

  Second, the text with fonts bit if it's not black is very blurry pixeled, very difficoult to read.

  O Google searching I found similar problems for many people, but they have solved the problems, simply assign the HDMI PC input.

  Unfortunately, they used Samsung or LG screens and there in my Toshiba is not the parameter to indicate the HDMI signal PC.

  What can I do to use this device as a monitor in the right direction?

  Hello

  First of all I must say that this device isn t 22L1334G Toshiba PC monitor but it s a TV that can be connected to the computer via the available RGB (VGA) port.

  Thus, in case you want to connect a computer to this TV and want to use it as an external monitor, you should use the VGA port available

  I must say that I had the same problems in the past with blurry fonts using the HDMI port.
  I connected a device combined monitor/TV and connected my laptop to an external monitor s HDMI port.

  Blurry fonts were really a pain using office applications, but I found a solution; my device supported an additional DVI port and I was able to connect my laptop to monitor cable HDMI-DVI.

  My other monitor takes care of one other manufacturer supports additional parameters to change the sharpness of police so I can use the HDMI port.

• I want out of my 27-1007 Omni ev to my TV using hdmi...

  Hello

  My Omni 27 - 1007ev has an HDMI port, I want to use for the tv output from my pc to my current tv Online (to get British television here in Cyprus).

  The manual is not clear on this, but show test that the connection seems to be one way only and that is from a console games on the pc. I want to go the other way.

  With a HDMI cable attached by pressing the button from the top (part right adjacent pc to the HDMI port) brings up a message of game mode on a gray screen.

  The second of the top button reveals a facimile of the buttons on the screen with this button with a forbidden access to sign on. The volume buttons have no effect on the screen of the pc as shown in the manual.

  Overall, the TV screen remains empty.

  Someone at - it ideas.

  Thanks por

  Here are the specifications of your HP Omni 27 - desktop 1007ev. According to the specifications, the HMDI port on the side is for 'entry only video player or game console. Please consult this HP document titled "using a HDMI or HDMI Video Player with your PC Omni27 Game Console" for the appropriate connection and use of the HDMI interface input on your computer.

  To connect your TV HDMI to your computer 1007ev 27 Omni will require the use of a USB-to-video adapter as the EVGA UV more + UV39 or similar adapter.

• No sound on HDMI when connected to the Dock among

  Hello

  I am facing a problem with the HDMI Audio output when my ThinkPad Edge E531 connecting to my TV via my among Dock.

  The HDMI connection is established and video works fine. However, I can not all sounds for the TV speakers (I use external speakers, but already disconnected those test - no difference).

  When I connect the HDMI directly on the ThinkPad cable, video and audio work perfectly. A configuration previously used with a LG monitor that has a HDMI output input and speaker works fine as well.

  Active audio devices:

  The TV that is connected to the Dock from among:

  SAMSUNG (Audio device high definition)

  Connected TV ThinkPad:

  Digital audio (HDMI) (Audio device high definition)

  More info:

  8.1 Windows x 64

  Intel HD 4000 graphics driver 10.18.10.3412

  graphics NVIDIA GeForce GT740M 9.18.13.2762 driver

  Any help would be greatly appreciated.

  Try to install the latest Intel graphics drivers since the Lenovo support site relevant to your computer. When asked leave to replace the automatically detected drivers (usually newer). It worked for me. (on Thinkpad Yoga)

• Can I use to connect to the monitor external hdmi

  Can I use the HDMI port to connect to an external monitor while shooting video with my EOS 7 d? In addition, this monitor can be a 1920 X 1080 HD monitor? I would need to get a mini HDMI cable DVI, but want to make sure, that it would not harm the camera before trying.

  Thanks in advance!

  Hello HowardLane,

  Yes, you would certainly be able to use the EOS 7 d HDMI output to connect to an external monitor.  While a studio monitor is usually used because of their qualities of accuracy and calibration of color, any monitor with a HDMI terminal input would work.  This will not harm the camera.

• SX20. HDMI with audio and video?

  Hello.
  I have to integrate a SX20 codec with Extron HDMI matrix as the main source of video + audio.
  The main HDMI input, support with audio video integrated?

  Thank you.

  Luis

  We use the scalers Extron (DVS-605) to power the video (from several cameras in a provision of PiP) in our SX20s - however, we feed the audio through the mic connector.

  We have not tried audio HDMI at all.  The cards say it should work, but there is another discussion (ie the SX20 - Audio HDMI camera) where he says it's a bug with the documentation (CSCuh72577).

  The TC7 Administrator's Guide (Page 61) says that the HDMI Audio works that when using a camera with a built-in microphone Cisco, and, if you use any other device, the HDMI audio input will be disabled little matter however, you set the end point.

  The CE8.0.x software has removed the option "Audio input HDMI Mode" completely (Page 8 of CE8 Administrator's Guide).

  In short, I don't think you'll have some luck with your Extron HDMI audio, so you'll have to do as we did and feed your audio in via the microphone or the content entered.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• MY HDMI computer does not recognize my TV as audio device

  I have a Samsung (un32f5500ag) TV as monitor, I use with HDMI but I am using speakers separated because my computer does not recognize my TV as a valid speaker, I tried the configuration, I tried to update the drivers, checked outputs from the TV, but when I go to Audio devices, it is not here, I have checked my audio Nvidia also its ok. I don't know what to do, I need my computer to recognize my TV, it only recognizes my TV digital media devices, I need to be the audio device also, could someone help me?

  Hello Adrex,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur because of incorrect device or audio settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check. Please follow these steps:

  a. click Windows + W keys, type Troubleshooting in the search box and press ENTER.
  b. click on 'show all' and then click 'hardware and devices'.
  c. click 'Next' and follow the on-screen instructions.

  If this does not help, use method 2.

  Method 2:
  Sometimes, we need to manually set the TV to the HDMI connection input. We will have to disable improvements audio speaker. Please follow these steps:

  a. press Windows + X keys , and then click Control Panel.
  b. click hardware and sound , then sound.
  c. on the playback tab, click speakers , and then Properties.
  d. click the enhancements tab, and then click "disable all enhancements" checkbox.
  e. click apply and ok.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• HT-CT660 offers video but no sound with HDMI

  How do I "learn" the soundbar to 'remember' turn it on using the entry rather than the TV HDMI 3 input?

  I use the bar to his HT CT660 Sony with a new Vizio E601i-A3 60 inch LED TV. An HDMI cable connects my provider decoder to connect HDMI-3 in sound bar, and another HDMI cable connects from the HDMI TV OUT connection on the sound bar to the HDMI connection on the TV. By default, the channel of entry of the soundbar is set to 'TV' and the video will appear on the TV in this mode, but there is no audio data. The soundbar input channel must be set to "HDMI-3" in order to get the audio with the video. With this setting, I am able to control the volume of the sound bar with the TV remote control and when I turn the TV, the soundbar is also enabled/disabled. Very well.

  The problem is when the TV is turned off and then turned back on. The TV and video works. When the soundbar is turned on, it always starts using the entry rather than the parameter input HDMI-3, even though HDMI-3 was the setting when the TV is off "TV". This means that I can use the TV remote to turn on the TV and the Soundbar, but I have to use the Soundbar remote whenever I turn on the TV to change the input on the 'TV' sound bar to "HDMI-3" to get audio. ""

  I would, for the sound bar back to the same entry (i.e. HDMI-3), whenever it is turned on.

  How can I configure HDMI-3 to become the default entry fo RL soundbar?

  Thank you

  SoCalGuy

  I find that others have complained to this topic.  Listen to Sony?  To do a software update that allows the user to designate a specific entry for default ON EVERY POWER UP.

  I'm about to return my Sony Home Theater and get another brand...

• OTP-S790 HDMI Audio separation issues with DVD

  I bought the S790 use the double projection 3D for my Onkyo TX-SR875 HDMI is HDMI 1.3, not HDMI 1.4 compatible. HDMI 1 the S790 is directly connected to HDMI 1 input my capable 3D Panasonic PT-AE8000 projector and 2 HDMI is connected to the Onkyo receiver, including monitor output is connected to HDMI 2 of the projector for use with all other sources. Audio separation is granted on the system setup menu. I updated the version of the M13 software S790. R.0460.

  When you look at Blu - ray discs, I can get the audio to work, but I have to go momentarily to input HDMI 2 of the projector (probably then the Onkyo can complete the HDMI handshake) and then I can go back to HDMI 1 of the projector entry while I have the video. Audio (usually Dolby Tru - HD or DTS - MY) remains locked and everthing is fine.

  During DVD playback, and following the same procedure described above, audio (usually Dolby Digital or DTS) lock with the receiver when I switch to HDMI 2 on the projector, but when I go to 1 HDMI for the video, the receiver audio dropouts. I tried several disks such as the Lord of the rings and Spider-man.

  Anyone encountered this problem or knows what could help the got? I put the menu selections include:

  Control for HDMI-Off

  HDMI: Connected to TV - Off

  Display auto-off

  Screen Saver-Off

  As a matter of interest, if I enable Audio separation on 'Off' mode, I get only audio stereo, Dolby Digital not.

  Any help would be appreciated. Thank you!

  Hello Rick,

  Try the following settings in the Blu - ray drive:

  • Set an output HDMI Deep Color as OFF.
  • Define SBM (Super Bit Mapping) as EXTINCT.
  • Set the Mix Audio BD setting as OFF.

  Please mark it as "acceptable Solution" If you find this information useful.

• HT-CT660 HDMI ARC problems

  I have a new HT-CT660 I try to connect to my new Sony KDL-55W900A TV and I can't get the audio soundbar in play. I have a HDMI cable from HDMI TV OUT (ARC) on the Soundbar to TV HDMI 1 ARC decision-making. I have an another HDMI cable connecting my DirecTV HR44 to my TV HDMI 3. When I try to change the settings of the speakers on the TV it says "System Audio is not available" and it switches back on the TV speakers. I checked that the CRA is set on IT on the HT CT660.

  Any ideas? Am I missing something really simple?

  Try to disable his first HT CT660 bar. The TV to the HDMI 1 input can change the speakers to the SYSTEM AUDIOoption.

  Turn on the sound bar and attribute ON CONTROL for HDMI and options of the CRA . Please refer to page 28 of the HT-CT660Manual. You can also see the other post here on the same subject.

  If my post answered your question, please mark it as "accept as a Solution.

• Message to "Check video cable" HP 2311 X

  HP,

  I have a HP 2311 x which was bought in end Nov 11.  I used it with my custom computer Pro Windows 7 64 bit on a GTX 460 graphics card via DVI.  Friday I started to get the message to check the video cable to a black screen and then the screen to standby.  When the monitor made its start sequence DVI input is recognized as active, but I still receive the message check the video cable.  Here are some of the things I've done:

  I changed video DVI cables-unchanged

  I tried to manually select the input DVI - no change

  Used the second my unchanged video card DVI connection

  Used my GTX 460 and DVI cable on another monitor-everything worked well

  Plugged the cable well checked the HP 2311 x - no change

  Used a VGA output, a 2nd video legacy card(Radeon X1550)-monitor has worked with a slight distortion

  Used output DVI check video cable Radeon X 1550 - received message

  Used of an Asus Eee PC monitor VGA output worked without any problem

  I have not tried HDMI, or I want to use the HDMI.  If the monitor has been done to DVI it should work.  Any help would be appreciated.  I've seen other threads with a similar problem, but they were not using the HDMI DVI input.

  Jason

  Hello

  Only fix an active video cable to the monitor.

  Try a reset of the monitor. Unplug the power cord from the monitor and hold the power button of the monitor for 30 to 60 seconds. Plug the monitor back in and it lights up. Now restore the Source entry in the menu of the DVI monitor.

  Try the monitor on another PC via DVI.