HDMI / HDMI to Toshiba large computer screen does not just work... why?

Similar Questions

• HP pavilion g6-1016ex the computer screen does not.

  HP pavilion g6-1016ex the computer screen does not. but when I connect to the pc display by display moniter on-site port, pc display moniter works. How can recover from this problem... ?

  Have you tried pressing F4 or Fn + F4 to switch between the views?

  If it still does not work, the following document can help you identify the problem: display problems.

• The computer screen does not turn off after the specified power Options

  I tried several ways on trying to turn off my monitor of my laptop through the options of food and the use of some applications such as nircmd but nothing works every time. I'm sure it can be a program I am not using a device. I have a wireless mouse plugged into a USB port, but I know that's not what is keeping the PC awake, as always happens when it is not plugged. The thing that bothers me is I don't know how to identify this process shut off and I tried to put end as many process I can safely or those that I am knowledgeable in the subject to close. I would really like this feature back. Thanks in advance for the answers and ask if all the details are needed.

  I understood what was the 'problem '. It turns the screen of my laptop never turns off if my laptop is installed on a sloping surface, because it assumes that I'm working on it. When I went to bed my laptop on a flat level surface, is power does work normally, as reduces the brightness of the screen to the bottom, then turns off after a while. I guess it must be a form any a single function on my laptop. Thanks for all your answers.

• Hp 15-g025wm laptop computer screen does not.

  Laptop is HP 15-g029wm. Was purchased as the view model work. Not used for a month or two now powers on but no screen.

  Battery in charge for about 3 hours.

  Led by jack power is turned on.

  Fan is running and working.

  Seeing WiFi is turned on.

  Hard reset has no effect. (Removed the Batt power button. Hold for 10 sec).

  Same results with the battery removed.

  Light flashing 1 gel. Failure of CPU?

  What else can I try with no sceen?

  James

  Thank you. Well do.

  James

• Games does not just work?

  I tried to play a game, he made all the sounds and I knew he was shooting. But nothing came, the AutoPlay thing didn't come to the top. And then I'm ok bad open it manually, but then I went to 'computer' (im on vista) and it wasn't even an option for the disk it
  Then I tried with 2 other games and he did exactly the same thing!
  Ireally want to play this game please help

  I had a similar problem that I managed to resolve.

  Try this first because your CD drive may not appear in your device manager. (When I had this problem was not visible in the cd-rom Device Manager).
  My computer is a toshiba. I think that this problem is caused by an older version of a program called Cd-rom Drive Acoustic Silencer.
  If you have a similar program, you will be able to update.

  Ferdinand if you locate your cd-rom drive in your device manager try to update your driver.

  Do this by going to START, control PANEL, HARDWARE AND AUDIO, MANAGER of DEVICES, CD-ROM/DVD-ROM drives have a + next to him expand the folder, click here, click the drive on the left and click on PROPERTIES , this will open a window click DRIVER, click on to UPDATE DRIVER your computer will do the rest.

  I hope this helps.

• Why cant I after installation of my printer in my computer lexmarkz23 z33 toshiba laptop will it does not print

  Why cant I after installation of my printer in my computer lexmarkz23 z33 toshiba laptop will it does not print

  Have you looked on the Lexmark web site for help? There is a firmware download here:

  http://support.Lexmark.com/index?locale=en&page=product&ProductCode=Z33_COLOR_JETPRINTER&segment=support&UserLocale=en_US&FromPage=null#1

  Are you sure that your printer is the default in the printer folder? You can print a test page?

• Define a user account already but every time I start my computer the Welcome / logon screen does not appear.

  Original title: user account number.

  I've set up a user account already but every time I start my computer the home / log on screen does not appear

  Hi willy79,

  How many accounts do you have?

  You can check if the Welcome screen is enabled in your computer.

  For more information, refer to this link: to turn the Welcome screen on or off

  Hope the helps of information.
  Please post back and we do know.

• When I turn on the computer, it does not show my office. It comes up with a white screen

  Original title: bad start.

  On May 15, 2013, I was prompted to download 8 updates from Microsoft. Since then when I turn on the computer, it does not show my office. It comes with a white screen. The only way to see the desktop is at the stop 'wrong' to turn off the power to the computer. Then I reboot, it just asking if I want to boot up normally, I say Yes and all is well on the office. Seems related to downloads of May 15, 2013. Any ideas?

  Hello

  Method 1:

  I suggest you to select last known good Configuration in Windows Advanced options and check if it works.

  To do this:

  a. restart the computer and press the F8 key for about four to five times.

  b. you will see the that last known good Configuration in the Advanced Windows options.

  c. Select last known good Configuration and press enter.

  Method 2:

  See the article and check if that helps:

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  For more protection, use System Restore backup and restore, which is designed to help save email, photos, documents and other personal files.

  Note: when checking your drive hard for errors, if bad sectors are found, it tries to repair this sector and if all the available data may be lost.

  Let us know if it helps.

• Light (switch) on my screen does not turn off. I have to shut my computer down several times a day to turn off the monitor.

  Light (switch) on my screen does not turn off.  So, I shut down my computer and restart several times a day, because when I put it in mode 'sleep', he wakes to the top in a few minutes and will not fall asleep.  I could put a blanket on my screen when not in use, but I'd rather find a way to make it stay asleep when I tell him.

  Light (switch) had already done once before and I was so worried that once I turned off the monitor that I would never get it new on... a bit short of money here, to buy a new monitor, but the next day, I pressed the power button with an additional downward pressure and I could so he could start working again (able to turn the market monitor).  It was about 3 weeks ago.  Now, the light stays green, unless I stop the whole computer.

  Maybe my main problem is sleep mode, which removes the screen for like 2 minutes and then he wakes up to the top and is so rude when I myself and try to sleep, I just turn off the monitor everytime I put the computer to sleep.

  Now, I can't turn off the monitor, except by turning off the computer.

  Hi JDandGinger,

  I suggest you follow the provided article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  If the problem still persists contact the manufacturer of the monitor for more help and information.

• ASUS laptop computer: touch screen does not work after update of windows 10

  My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

  Hello

  Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

  Kind regards.

• Screen does not work on Satellite L775-10F

  I turn on the computer and the screen does not work. Everything seems fine but the screen is all black.

  Nothings happening. I tried turning market and its still does not.
  I also tried to connect to my TV with an hdmi cable.

  What should I do?

  Connect it to the TV and wait until Windows 7 is fully loaded (you will hear sound Win) than trying to use FN + F5 several times. It may happen on the TV Office. Be sure you use the right settings on the TV (HDMI port must be enabled on the right).

  F nothing helps I presume the display can be defective then contact the closest service Toshiba and let them check your laptop.

• Aspire One 522 screen does not

  The monitor left on my netbook (Aspire One 522 Windows 7), the machine works when connected to an external monitor. I tried upgrading the BIOS, but the screen does not always react. Anything else I can try before I get another machine for my trips?

  Thank you

  John

  Hi John:

  I had what seems to be the same problem with the AO722. It unfortunately turns out to be a pause that has developed in the display ribbon cable & camera near the hinge area - it's intermittent at first, but eventually the screen cover works (the problem of the famous black screen that is not fixable with a bios upgrade). I was forced to use either an external monitor or TV hdmi to work with the system until I finally took the laptop part (a royal pita, withdrawal plug-in keyboard was the worst part) and replaced the Ribbon by a piece of Amazon.com. The part number of the tape is marked on the Ribbon connector.

  Right now, I try to avoid opening and closing the lid too to reduce stress on the Ribbon near the hinge area - the Ribbon takes a tortuous path in this hinge - I'm surprised that the original lasted as long as he did. Also, I covered the keyboard of the snap-ins with tape is easier to remove if I have to take off again - hope not! I use black tape to tape actually the upper part of the keyboard on the main body of the computer - not noticeable.

  Jack E/NJ

• Qosmio DX730 and Win8 - touch screen does not work

  Hello

  My wife's parents bought a Toshiba Qosmio DX730 (model PQQ11A). They have recently upgraded to Windows 8 and the touch screen does not work now.

  The problem is lack of drivers (the monitor driver reports as a generic PnP monitor).

  I have went on the Toshiba site and selected downloads driver for the appropriate model and installed a number of drivers, including recommended NVidia display drivers. There is no drivers on the site that seem to install support for Toshiba touchscreen.

  Are there no drivers available for this model Windows 8? If not, is there another solution? If Yes, where can I find them. Any help very appreciated because they have nice and bought computer Windows 8 so they could use the touch functions.

  Thank you.

  Hello

  On the page of the Toshiba UE driver you can find drivers for Win 8.
  As far as I know that you will install the Toshiba display driver for the touch function works correctly.

  I found this driver.
  Please check if you can install this:
  [Win 8 TouchScreen software for Qosmio DX730 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 381 & selSeries = 366 & selProduct = 7338 & salt ShortMod = null & language = 13 & selOS = 40 & selType = all & rupload = Yes & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 83418 & O SID =-1 & driverLanguage = 42]

• Toshiba Satellite L70 - B does not start the BIOS or OS

  Hello

  I changed the same parameters (UEFI priority CSM to start: FIRST USB) in the Bios and saved them, now computer laptop does not start, I can't enter BIOS more... Just see a black screen... I tried to remove the pulp and power, clicked on the power 1 m button, but nothing has changed...

  I can fix this please

  Laptop model: Toshiba L-70-B

  Any help please?

• Satellite M60 - screen does not light when I reboot

  I have a Toshiba Satellite M60 and the screen does not come when I turn off or restart. It takes approximately 12 trials before it lights. When the screen does the computer not light again starts ok just no screen.

  I put in sleep mode if I don't want the hassle of trying to get the screen lights up. What is a screen problem or inverter?

  Any help would be appreciated.

  I doubt that someone who has no experience with this stuff will be able to replace anything on the motherboard.
  For me it sounds very risky and I think that it of better to take the machine to an experienced technician to do this in his own hand and damage the whole motherboard