HDMI help requested

When I plug my Xoom into my TV using a DVI-HDMI adapter / all I get on the TV screen is an Android asking 720 p? does anyone have any suggestions that the TV is a panasonic 53 ".

Thank you

Eric

I think that some have had success with HDMI to VGA, but you still no sound from the tv

Tags: Motorola Phones

Similar Questions

  • Why is my help requests being deleted?

    3-4 of my requests for help last week disappeared.

    I'm still waiting for assistance.

    My messages were respectful at all times.

    Why is this done?

    Spitfire,

    Maybe they were duplicates, as these two?

    Results of terminal script below for frozen, then slow cursor

    Frozen cursor MacBook Pro 13 "w updates

  • Help request deleted blackBerry smartphones! I want to go back!

    I accidentally deleted the request for help while trying to remove a third-party application. I was surprised that a, I fact and two, let me not! How do I get it without having to reload all the software completely (and lose all my other apps)?

    Open your Desktop Manager > application loader, run it and CHECK help load.

    If nothing is present in the application loader, you need to charge your current device OS on your PC.

  • Need help request!

    Hi all

    I am faced with a request to generate a model:

    The problem is the following:

    I have a test table in

    create table test

    (

    Identification number,

    varchar2 (20 char) value,

    date date

    );

    and the row values are as follows:

    value date: ID:

    1:value1:Date1

    1:value2:date2

    1:value3:date 3

    where date1 is today, date2 is yesterday and date 3 is the day before yesterday.

    I have to generate a format like below:

    ID: old_value:new_value:changed_date

    1:value3:value2:date2

    1:value2:value1:Date1

    where id, old_value, new_value and modified date are columns.

    Any suggestions would be helpful.

    select *
    from (
      select id
           , lag(value) over(partition by id order by dt) as old_value
           , value as new_value
           , dt as changed_date
      from test
    )
    where old_value is not null ;
    
  • Help request NULLIF

    Hi all

    I wrote the request to show that if the sal & comm are same the result should display 'same' thing below, it should display "diff".

    Select nullif (sal, comm), ename

    WCP

    where is nullif (sal, comm) =: nullif (sal, comm)

    then dbms_output.put_line ('same')

    on the other

    dbms_output.put_line ('diff')

    /

    But I get the mentioned error below

    SP2-0552: Bind "NULLIF" undeclared variable.

    Help is kindly solve its appearance like why and what needs to be done.

    Thank you...

    Others have mentioned your errors of syntax and other ways to do the task, but nobody gave the reason for the specific error that you got.  Here it is:

    Select nullif (sal, comm), ename
    WCP
    where if nullif (sal, comm) =: nullif (sal, comm)
    then dbms_output.put_line ('same')
    on the other
    dbms_output.put_line ('diff')

    The equality in SQL and PL/SQL operator is = and in PL/SQL assignment operator : =. There is no =: operator anywhere, if the compiler sees the: nullif as a variable binding.

    John

  • Help request Service!

    In a Service request, I created a field of type is TimeStamp. The name of this field is "Suspension to start."
    I would like the default value in this field is the exact time of the time when I change the status of the demand for services and the State is monitoring.
    When the status of this service request stands in assisted, the value of the field ('Suspension start') must be null, when the State becomes assisted, he is practically should be valued with the time of the change.


    I wrote in the service of the default:

    IIf ([< status >] =' attesa', Timestamp (), 'Null')

    but it does not work, how do I do?


    later as I do to develop a new field (end Suspension) with the exact time when the demand for services status changes to in a attended a different value.

    Help me, please!
    Thanks Vale.

    Hello!

    When you have selected the status field in the field list, simply click on the link to the right of the drop-down list field. It will allow you to select the status you need and it will add LookupValue() in your state.

    Try and test it and tell me...

    Max

  • Analog sound HDMI help? (w2408h and Pavilion m9177c)

    Has anyone found a way to use the HP w2408h HDMI connection and the m9177 flag while using the analog connector (green) for the sound?  My problem is the following: if I connect the monitor using the HDMI cable, I get the big picture but bad sound from the built-in speakers.  If I connect the monitor using the VGA cable, I get distorted but, video in this regard, I can use the analog green connector and my subwoofer (to get much better sound).  that I have not found how I can use the computer's output using the analog sound HDMI connection; it seems using HDMI turns off the Green connector output...

    I bought a male-DVI female to HDMI adapter today and finally having my w2408h one good picture and good sound of good old computer speakers Altec 2.1 I still hanging around.  Adapter is $20 + tax.

  • Logic of long-standing problem - help requested

    3.6.1 numbers using

    I am trying to improve the process that I do in my work. I have download and regularly need to massage ~ 850 lines of spreadsheet data but the variables seem to be either impossible to work with or the method required beyond my comprehension. Can someone please help save me from going bonkers?

    • Data records of the directors and their users, sometimes 0 users, no maximum.
    • Users share the same alphanumeric ID as their directors
    • There are two types of administrators; Like 'John Allagain' and 'other' individual directors.

    I need to order the entire worksheet go something like this: (only ordered by ID alphanumeric)

    1234 4321 328 ZZZ

    CARIS Easton

    User

    1234 4321 328 ZZZ

    Jerri rains

    User

    1234 4321 328 ZZZ

    John Allagain

    Administrator

    1234 4321 328 ZZZ

    Letha Piper

    User

    1234 4321 328 ZZZ

    Kenelm Brams

    User

    1234 4321 328 ZZZ

    Noelle Walter

    User

    2345 4311 456 ZZZ

    Chris Stopme

    Administrator

    2345 4311 456 ZZZ

    Tennyson sand

    User

    3456 6543 345 ZZZ

    Katelyn Elvis

    User

    3456 6543 345 ZZZ

    White Leyroy

    Administrator

    3654 3873 683 ZZZ

    Rowena Dixon

    User

    3654 3873 683 ZZZ

    Suzie Blankichip

    Administrator

    4235 7431 123 ZZZ

    Bob Jones

    Administrator

    4235 7431 123 ZZZ

    Unity Granville

    User

    6543 3455 875 ZZZ

    Benny Hurst

    User

    6543 3455 875 ZZZ

    Nancy Zinger

    Administrator

    6543 3455 875 ZZZ

    Randy Rennoll

    User

    9384 5837 443 ZZZ

    Kitchen of Gaylord

    User

    9384 5837 443 ZZZ

    Janessa Howard

    User

    9384 5837 443 ZZZ

    John Allagain

    Administrator

    9384 5837 443 ZZZ

    Laraine Wyght

    User

    To do this:

    1234 4321 328 ZZZ

    John Allagain

    Administrator

    1234 4321 328 ZZZ

    CARIS Easton

    User

    1234 4321 328 ZZZ

    Jerri rains

    User

    1234 4321 328 ZZZ

    Letha Piper

    User

    1234 4321 328 ZZZ

    Kenelm Brams

    User

    1234 4321 328 ZZZ

    Noelle Walter

    User

    9384 5837 443 ZZZ

    John Allagain

    Administrator

    9384 5837 443 ZZZ

    Kitchen of Gaylord

    User

    9384 5837 443 ZZZ

    Janessa Howard

    User

    9384 5837 443 ZZZ

    Laraine Wyght

    User

    2345 4311 456 ZZZ

    Chris Stopme

    Administrator

    2345 4311 456 ZZZ

    Tennyson sand

    User

    3456 6543 345 ZZZ

    White Leyroy

    Administrator

    3456 6543 345 ZZZ

    Katelyn Elvis

    User

    3654 3873 683 ZZZ

    Suzie Blankichip

    Administrator

    3654 3873 683 ZZZ

    Rowena Dixon

    User

    4235 7431 123 ZZZ

    Bob Jones

    Administrator

    4235 7431 123 ZZZ

    Unity Granville

    User

    6543 3455 875 ZZZ

    Nancy Zinger

    Administrator

    6543 3455 875 ZZZ

    Benny Hurst

    User

    6543 3455 875 ZZZ

    Randy Rennoll

    User

    The hierarchy resulting is therefore:

    • Each Director named John Allagain, with
      • Their respective below, users followed
    • Each of the other directors, with
      • Their respective under users.

    How do I get there?

    You can try something like this:

    Sort by C:

    Then sort by A:

    I'll give you this:

    Insert cells empty and drag John Allagain to the top.

    If you have a lot of John Allagain throughout the table, then you might duplicate column C column D, change all the values of the administrator for John Allagain in column D for 1success (leaving the other values of the administrator the same).  So the same sequence as above except you would first sort on column D (not C), then on column A.

    Best to make a backup of your table before you try this, in case you're wrong and you need to start over.

    SG

  • Compaq 6715 b No. WiFi help requested

    I just made a new clean install of Windows XP sp3 and can't seem to get the wifi working. I just bought this 2nd hand computer. Everything seems to work except the WiFi. I think I installed all the drivers, but I'm not sure. I have the little blue light at the top of the keyboard, but still nothing.

    I have zero unknown in Device Manager.

    I have two monitors icon in the status bar that says "Bluetooth Network" (a network cable is unplugged), but I don't have any bluetooth device.

    The other icon of two monitors is the Internet cable which is connected and working.

    I reinstalled the card wifi without result, it doesn't seem fair... Check in information system/network and there was no wireless adapter. So, is this map? Mobo?

    Any help would be appreciated.

    Hello:

    I agree that the motherboard has a problem.

    (Being the exact same model) wireless card would have passed the BIOS check and worked, because the map is a map of known work, or you would have gotten the unsupported BIOS wireless card stop Code if the motherboard has picked up the card and BIOS has rejected.

  • Help request for C:\windows\system32\config\system / Bad Pool Caller / on xp

    . Hi, I have xp sp3, and after the established cat off for switching on the pc appears the error message mentioned.  I tried f8 for boot from the sp3 installation CD and ends up with the BAD_POOL_CALLER message.  That's why I can't launch 'r' for recovery apparently safe mode.  Any suggestion would be appreciated before gratefully the cat gets it... Thank you.

    Well, if you can start on some CDs and get to a command prompt on your HARD drive, you should be able to implement the suggestion of KB307545 of Microsoft Support Engineer Halima S and "check if it helps" (I don't think it will be).

    Here's how you describe / have symptoms that indicate the need to use KB307545:

    Zero

    If you want to make a bootable CD from the Console of the Recovery XP (no XP media required) and then to implement the proposal of Microsoft Support Enginner Halima S and check if it helps.

    Here's how:

    Boot into the Recovery Console Windows using an XP bootable installation CD.

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

    This is not the same as recovery disks that might have come with the acquisition of the system store.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    xp_rec_con. ISO

    Download the ISO from here:

    http://www.mediafire.com/?ueyyzfymmig

    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

    http://www.ImgBurn.com/

    When you install ImgBurn, DO NOT install the Ask toolbar.

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

    When you get into RC, is if you can run a chkdsk/r...  Here's how:

    A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

    In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

    Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

    Assuming your boot drive is C, run the following command:

    CHKDSK C: /r

    Let chkdsk finish to correct the problems, he could find.

    It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

    You must run chkdsk/r again until it finds no error to correct.

    Remove the CD, and then type "exit" to exit the RC and restart the computer.

    You have not to set the BIOS to boot the disk HARD since the CD won't be.

  • Exit WMP with the HDMI help!

    OK, so ive just connected my TV to the computer and divide the monitor and the TV, but now for some reason wmp plays through hdmi but when I go to youtube and vlc it plays through my 5.1 System. How can I avoid that wmp when playing via the HDMI?

    Hello

    I suggest you check in Windows media player if the default output device has been changed to 5.1 System. The unit selected by default on the sound icon in the lower corner on the right, works as a default output device. Follow the below mentioned steps to set the default device.
    (1) start Windows Media Player on any video file
    (2) make sure that you can see the video and sound on the laptop.
    (3) the right mouse click on the area of Windows Media Player (video).
    More options-> Devices tab-> speakers select from the list of devices-> click on the properties button.
    (4) in the pop-up window modal 'properties of the speaker'-> select the audio device: => select '5.1 System.
    (5) save all windows.
    (6) close and restart Windows Media Player

  • HP dv9700z Windows XP DownGrade help request

    Dear all,

    I installed Windows XP on my HP dv9700z laptop.

    I have three missing drivers.

    You could help me find the following drivers?

    1. Ethernet controller

    2. SM Bus controller

    3 Ricoh 1394

    Thank you in advance.

    NVIDIA Chipset, install and reboot, choose the option install mediashield drivers_no ONLY:

     
  • Cannot right click Windows 7 Explorer of files to generate the copy of the file names in a Notepad or Excel-compatible file. HELP REQUESTED!

    I struggled for several hours to restore the service right click that I used to have XP to Windows 7.  I need to save lists of file names such as displayed in the file Explorer. Allowing you to right-click and save files in Notepad. This option has been removed in Windows 7 and anything put in place to restore it.

    I have lists of items in the inventory and need to copy and paste the image corresponding to a transfer sheet to allow the server names to match images in article SKU.  The file names are long and typing is a complete waste of time.

    I used to be able to find them in the Windows Explorer, right-click on the directory and generate a txt file that I could open in Notepad or Excel.  -Easy.  Now right-click only allows an export in an uneditable image in ONE NOTE. This is useless for me. I can't do anything with an image file - I need the editable data.

    Is there a solution?  I need only the file name and extension, not the full path, in a text or spreadsheet document propagation.

    I had used the Microsoft solution to install their dose without knowing the final format was a NOTE image file format and not a simple txt file. I try now too write the batch file:

    %windir%\Printdir.bat

    or edit it in order to keep the file in Notepad and do not make the final conversion into a single Note.

    The problem is that the fix from Microsoft, designed to fix this problem, has placed the conversion file in the root directory and it cannot be overwritten.  I refused the possibility to delete, edit or write the file due to the requirements of administrative privilege mandated by the security of Windows 7 too much.

    So if anyone has a solution to every problem - that would help - I am very tired and frustrated and not happy with Microsoft.  Their zealous concern with security made their unnecessary programs for me and have further discouraged me to convert to the windows 10. frustrations and nightmares are waiting for me there I can't imagine.  What I really want to do at this point is to go back to XP.

    He ate five hours of my day. I don't have the time to fight like that. I am trying to be productive, but all I got are monumental technical walls and roadblocks - often designed into the system. Frustrating doesn't begin to describe it.

    Found a solution on a Web site:

    http://www.watchingthenet.com/how-to-print-a-directory-tree-from-Windows-Explorer.html

    They said it was for VISTA, but worked for me under Windows 7. You will need to use Notepad to the command prompt and select run as administrator to save the file in the root directory.

    Thanks for the help.

    Cheers.

  • BlackBerry Smartphones help requested in Saudi Arabia

    Anyone in Saudi Arabia, which can provide information on how to configure the BB with Al Jawal?  or know the url of a help page for Al Jawal in English?

    Everything now OK with the BB.

    Thanks for the help.

  • Help request of customer orders

    Hello!

    I'm stuck and I'm a little confused about what to do.

    I did a query that displays sales order data, the query is:

    "

    Select

    OHA.order_number "Order number"

    OHA.ordered_date "Order date"

    OHA.cust_po_number "Number"

    Ott.Name "Order Type"

    OLA.line_number "Line number"

    MSI. Segment1 "Item Code",

    MSI. 'The item name, description

    -wdd.lot_number "LOT number"

    OLA.ordered_quantity "quantity."

    OLA.order_quantity_uom "UOM ordered."

    OHA.transactional_curr_code "currency."

    OLA.unit_selling_price 'unit sales price. "

    (ola.ordered_quantity * ola.unit_selling_price) "Sale price of line."

    OLA.shipping_quantity 'quantity shipped. "

    OLA.shipping_quantity_uom "UOM Quantity Shipped."

    (nvl(ola.shipping_quantity,0) * ola.unit_selling_price) "Delivered price",.

    cases where oha.transactional_curr_code = 'HUF' THEN (nvl(ola.shipping_quantity,0) * ola.unit_selling_price) other (nvl (ola.shipping_quantity, 0) * ola.unit_selling_price * ATCM.) End EXCHANGE_RATE) "prize shipped in HUF.

    OLA. ACTUAL_SHIPMENT_DATE "Delivery Date"

    extract (YEAR OF OLA. ACTUAL_SHIPMENT_DATE) "Shipped year."

    extract (MONTH OF OLA. ACTUAL_SHIPMENT_DATE) "Shipped months."

    extract (DAY OF OLA. ACTUAL_SHIPMENT_DATE) "Shipped day."

    OL. Meaning "order status."

    HCA.account_number 'Cardcode. "

    bill_p.party_name 'Cardname. "

    DECODE (bill_loc.city,

    NULL, NULL,

    bill_loc. City | ', '

    )

    || DECODE (bill_loc.state,

    NULL, bill_loc.province | ', ',

    bill_loc. State | ', '

    )

    || DECODE (bill_loc.postal_code,

    NULL, NULL,

    bill_loc.Postal_Code | ', '

    )

    || DECODE (bill_loc.country, NULL, NULL, bill_loc.country) "Delivery address"

    bill_loc. Address1 'Expedition street. "

    ship_loc. "Shipping city," city

    ship_loc. Indicative "Expedition", country

    FT.territory_short_name "country of dispatch",.

    (select name

    of ra_salesreps_all

    where salesrep_id = oha.salesrep_id

    and org_id = oha.org_id) 'name of the sales person.

    of oe_order_headers_all oha.

    ola oe_order_lines_all,

    oe_transaction_types_tl ott,

    MSI mtl_system_items_b,

    hz_cust_site_uses_all bill_su,

    hz_party_sites bill_ps,

    hz_locations bill_loc,

    hz_cust_acct_sites_all bill_cas,

    hz_cust_accounts bill_ca,

    hz_parties bill_p,

    hz_cust_site_uses_all ship_su,

    hz_party_sites ship_ps,

    hz_locations ship_loc,

    hz_cust_acct_sites_all ship_cas,

    -wsh_deliverables_v WD

    fnd_territories_tl ft,

    oe_lookups ol,

    hz_cust_accounts_all AOB,

    ra_customer_trx_all ATCM,

    ra_customer_trx_lines_all rctla

    -wsh_delivery_details JMD

    where oha.header_id = ola.header_id

    and bill_p.party_id = hca.party_id

    - and wdd.source_header_id = ola.header_id

    - and wdd.source_line_id = ola.line_id

    and oha. ORDER_TYPE_ID = ott.transaction_type_id

    and ott.language = userenv ('LANG')

    and ola.inventory_item_id = msi.inventory_item_id

    and ola.ship_from_org_id = msi.organization_id

    and oha.invoice_to_org_id = bill_su.site_use_id (+)

    and bill_su.cust_acct_site_id = bill_cas.cust_acct_site_id (+)

    and bill_cas.party_site_id = bill_ps.party_site_id (+)

    and bill_loc.location_id (+) = bill_ps.location_id

    and bill_cas.cust_account_id = bill_ca.cust_account_id

    and bill_ca.party_id = bill_p.party_id

    and oha.ship_to_org_id = ship_su.site_use_id (+)

    and ship_su.cust_acct_site_id = ship_cas.cust_acct_site_id (+)

    and ship_cas.party_site_id = ship_ps.party_site_id (+)

    and ship_loc.location_id (+) = ship_ps.location_id

    and ship_loc.country = ft.territory_code

    and ft.language = userenv ('LANG')

    and ol.lookup_type = 'FLOW_STATUS. '

    and ol.lookup_code = oha.flow_status_code

    and ola.shipping_quantity IS NOT NULL

    AND rcta.customer_trx_id = rctla.customer_trx_id

    AND rctla.interface_line_attribute6 = TO_CHAR (ola.line_id)

    AND rctla.interface_line_attribute1 = TO_CHAR (oha.order_number)

    - and oha.order_number = 1000914

    "

    The query works perfectly except one case.

    If I have sous-lignées, non-conventional lines (see attachments) in this case the query display only the first value of sub-line.

    Also if I connect wsh_deliverables_v tables for LOT numbers, the lines will be multiple and I don't know why

    Thanks for your help in advance,

    Zsolt

    I found the solution. If someone else stuck, here is the solution:

    In where condition change this line:

    AND rctla.interface_line_attribute6 = TO_CHAR (ola.line_id)

    to do this:

    AND (rctla.interface_line_attribute6 = TO_CHAR (ola.line_id) or rctla.interface_line_attribute6 = TO_CHAR (ola.split_from_line_id))

Maybe you are looking for