HDMI Splitter El Capitan - Sierra

Similar Questions

• HDMI Splitter

  I was using a HP and I had connected him to three different views. I use a hdmi splitter to connect displays to the hp. I bought a macbook pro to replace my hp and now one of the screens is empty when my mac is connected. It dates back to when the hp is connected. The screen turns off is an apple tv. Something wrong?

  Hello nlbc123,

  I understand you have a problem with the external display on your MacBook Pro. Let's see if we can get smooth it.

  The first thing you want to look over is to see if you can detect that the display is that it is disabled when you are connected. Open System Preferences > displays and in the lower right corner of the window. If you don't, hold the Option key to setting this up. If this does not work then you can try to connect the display directly instead through a HDMI splitter.

  Check out the articles below to learn more about the detection of the display as well as additional troubleshooting to get this working for you.

  OS X El Capitan: connect multiple monitors to your Mac
  https://support.Apple.com/kb/PH22153

  Get help with graphical problems on external displays connected to your Mac.
  https://support.Apple.com/en-us/HT201177

  Take care

• Presenter PowerPoint on Mac mini mode displayed on the screen and the projector when using HDMI splitter

  We have a Mac mini connected to a screen and a projector via HDMI using a HDMI splitter.

  It works fine for most applications, but during presentations PowerPoint, presenter is displayed on the monitor and the projector.

  When I disconnected the mini Mac's HDMI cable and put it in a MacBook, the presenter appeared on the MacBook screen (as it should) and only the slide appears on the screen and on the projection screen.

  Of course if we have to use the MacBook for presentations instead of the Mac mini, you would need to have seen the presenter on both the screen and on the screen of the MacBook.

  In the Mac mini display preferences there is no button to "Gather Windows" when the Mac mini is attached to the screen and the projector via HDMI splitter is a tab "setting."

  But these two things appear on the MacBook when it is connected.

  Any help would be greatly appreciated.

  Thank you!

  Mike

  

  

  I'm confused. When you use a video separator the same screen will appear on the two monitors connected to the separator. This is how works a separator

• Problem starting el capitan (sierra) - built-in keyboard and the mouse do not respond

  Hello

  I have a 2015 macbook pro (SSD 256, 16 GB of RAM last el capitan updated) with a wired problem.

  I use it mainly to a cinema monitor and I use wireless keyboard and mouse (office installation program), and of course as a stand-alone laptop when I'm not at my desk.

  When I put the laptop to sleep, everything works fine when I wake up.

  but, if I'm away from the office and I have to restart my laptop, here is the problem.

  The boot process is very very slow, there is no edge, and when I finally have the screen to unlock the safe, the keyboard and the touchpad do not react. Actually, that's not exactly true, they are so slow that they are unusable and get caught quickly, all gel. So I can't unlock and complete the boot. My laptop is unusable ;-(

  At this point, I get a message that if I forgot my password I just need to reboot by pressing the power button, and I'll be able to reset it.

  When I do this and aprΦs the dΘmarrage that more slowly than usual but ok, I get another screen with several options of problem solving. One of them is "keyboard not responding do not. When choosing this one, it asks if you want to remove safe. I tried and everything was back to normal.

  later, I delivered safe and I had the same problem again. I did the thing to be able to restart again and improved to sierra in the hope that it would disappear. However, the problem is still there.

  I thought I could try to restart my office to see if my keyboard and wireless mouse would still work. Indeed, even if responsiveness was not normal, I could unlock and fill the chest.

  I have the impression that my laptop always "believe" it is on my desk, linked to my screen (probably the reason why I don't hear the Bell) and to my wireless K & M.

  It's really annoying and I hope someone has a solution.

  Thank you very much

  best,

  Alex

  I'm having a similar problem with macOS Sierra which I didn't have with El Capitan.  I can possibly move the cursor on the power button and turn off (no), but I must be patient because the keyboard and trackpad are only for a fraction of a second, which only allows me to move the mouse slightly.  After he stop and start back up, everything is perfect until I tried another reboot, and then I'm back to the beginning.

  I tried to reinstall the operating system, reset the SMC, resetting the NVRAM, reboot in SafeMode... nothing worked so far.

• Faces of people vs El Capitan Sierra

  I'm on El Capitan and using the faces in the Photos.  These faces have been updated and organized over the past 8 years.  When I switch to Sierra, who goes to work?  The faces will be migrated to the people?  Or will exist people and faces?

  For the moment, no one can discuss in public forums beta software. We all know during the liberation of Sierra.

• ITunes and the AppStore do not work with Sierra

  I upgraded to El Capitan Sierra and now ITunes and AppStore do not work. The message says something wrong with the internet connection and not able to connect.

  I tried to disconnect and connection that worked with the AppStore, but still can not.

  ITunes does not allow a reconnect.

  Any help appreciated.

  Thank you

  Aurore

  Try the following steps:

  OS x: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  Advanced steps for fixing problems with iTunes Store - Apple Support connection

• Sierra freezes!

  Hello

  I have a Mac mini mid2011, i5 2.3 8 GB.

  I have upgrated from El capitan sierra and after some time I saw this:

  The mouse pointer suddenly stopped moving. The keyboard still worked, the caps light lock worked.

  I launched rowmote pro from my iphone, and the mouse moves! But when I clicked on something, the pointer became the colorful circle turning. And after a few seconds the colorful circle stopped rotating (freezes) and the mac mini totally frozed. Not even the caps light lock could turn on.

  So the only solution was to hard to close and restart. Then after 30-40 minutes again the same freeze again and again...

  I did a lot of research, I installed the temperature and cpu temperature was less than 65 years old when it was freezing. I uninstalled many programs etc... But still the gel.

  So I had to clean install sierra, to make sure that there is no problem with the udate.

  So I installed sierra to clean and guess what! The same thing happened again! It freezes after a while for no reason!

  I must point out that I have the mac mini for 5 years and changed all the BONES, but never happened something like that. He began to arrive 1 hour after I've updated for sierra.

  Is there a way to see newspapers etc, in order to find what is the reason of the gel?

  If I can't find a solution, I'll install own El capitan, and if it works perfectly (as he did), then for sure it is a major problem of the sierra...

  Hi kavouras5,

  I understand that your Mac mini regularly becomes unresponsive. I know it's important to be able to use your Mac with reliability, so I'm happy to help you.

  Looks like you've already got a very good start on troubleshooting with steps you have made. Next, we'll reset your SMC that can often help with performance like this problems. You can see how to do this here:
  Reset the management system (SCM) controller on your Mac - Apple Support

  If you continue to have problems after that, you can use Apple Diagnostics to determine if there is a hardware problem with your Mac. You can see how to do this here:
  Apple Diagnostics using - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• Photos edited in Photos App is missing after upgrade to MacOS Sierra

  After updating to Mac OS Sierra, all my versions published of my photos is missing.

  Updated to:

  MacOS (10.12) Sierra

  App photos (Version 2.0 (445.1.15))

  It is said:

  -Update of El Capitan Sierra.

  -When the update, I started App Photos and update the library (260 GB).

  -A took the Photos App in the meantime round.

  -After all the thumbnails update was missing, but the pictures would be accessible by clicking on them.

  -Photos App must rebuild now all the thumbnails, but the photos I edited is still missing and even can not be seen by clicking on it (like the non-edited).

  -The missing files are a .jpeg and raw (.nef) from Nikon files.

  

  Have you tried:

  -Existing photo editing works

  -Edit photos (previous edition) missing persons, sometimes shows the missing picture, but it is not always a new tile.

  Any suggestions of how to make the pictures to update modified pictures?

  Did you turn on your mac to remove duplicates or similar cleaning applications?  Some cleaning tools are not safe to use.

  How do you change the photo in question? She has been published with adjustments to Photos or have you used an extension of photo editing?

  -Edit photos (previous edition) missing persons, sometimes shows the missing picture, but it is not always a new tile.

  Have you tried to take pictures with missing tiles to the original version in the control panel?

  And pictures can be exported from Photos or you get an error message?

• Office of Phoenix HPE h9-125 t: 2 HDMI monitors

  I have one the following configuration:

  I have two screens - one connected via HDMI and an older one connected via DVI

  I just bought a new monitor to replace the old model - and she only one HDMI or VGA capable

  I use two monitors in "extended display.

  I thought I could buy a HDMI splitter, but have read that it does not allow the extended display

  Any ideas on how to host the new monitor?

  

  Hello

  DVI and HDMI is digital, you can use a DVI - HDMI cable to connect the second monitor.

  http://www.OfficeWorks.com.au/shop/OfficeWorks/p/Comsol-HDMI-to-DVI-d-cable-male-to-male-1M-cohdmidv01

  Kind regards.

• Connect an apple iPad two televisions

  We have two Apple TV in the Office we need to connect to an IPad. We managed to connect one of the TVs now showing a PowerPoint presentation. My question is that we can connect two TVs to the IPad even? If this is possible please could you let me know how we can do this? TIA

  Hello. It is certainly not part of the normal application of AirPlay. If the two screens are not too far away, you might consider a multi HDMI splitter like Monoprice. Some of them use Cat 5 cable as interconnection, so you do not really long HDMI leads.

• HP Z27q 5 K, that monitor is considered to be two separate monitors

  Just updated the operating system of El Capitan Sierra.  (2013 MAC PRO - 12 hearts - 64 gig Ram w/SSD)

  My HP Z27q monitor 5K, in the Sierra, (which used to work in El Capitan) is now considered to be two separate screens.   In El Capitan, I have an announcement file (http://www.iclarified.com/49265/how-to-enable-support-for-the-hp-z27q-5k-monitor - to-mac-os-x-yosemite) to the override file and the wa it worked.

  However, Sierra I don't have rights to ad this file.

  Help, please!

  Hi PKscott,

  Have you tried to disable SIP protection and then installing the substitution file?

  1. Restart your mac
  2. until the apple logo appears press "r", hold "r" down until you see a progress bar appear
  3. When prompted choose English
  4. Click the Utilities menu
  5. Choose terminal
  6. in terminal type "disable csrutil".
  7. Press return
  8. You should see a message "the SIP is disabled.
  9. Click on the terminal menu
  10. choose to quit smoking
  11. Click on the Apple menu
  12. Select restart
  13. If you are prompted to select a startup disk select Macintosh HD
  14. Click on restart

• RAM

  The amount of space ram do I need to run windows 10 and mac os or os x el capitan sierra?

  For Windows 32-bit 10, 1 GB of RAM. For Windows 10 64-bit, 2 GB of RAM.

  For OS X El Capitan, 2 GB of RAM. For macOS Sierra, 4 GB of RAM.

  Keep in mind that these are minimum requirements; It is most likely necessary for smooth performance.

• HP Envy 311na 700: HP Envy 700-311na - no monitor output work

  Hi, thanks for taking the time to read this.

  No.: G9B05EA #ABU

  Model n °: 700-311na

  My PC works absolutely fine for the last two months, until what I tried to put on yesterday.  My problem is that my screen displays "signal found" despite my branch above Tower.

  Start-up and testing:

  • When starting my PC I get the usual beeps and the Red led on it becomes as it normally would.
  • The wifi light is on as it should be, on the front of my Tower.
  • The usual flashing light also works as usual on the front of the tower.
  • The fans work properly when turned on.
  • My wireless keyboard and mouse are recognized as soon as a key is pressed or the mouse moves, like light blue on my connector USB lights up as it normally would.
  • The CD open/close readers as it should.

  What I've tried so far:

  • Turning off and on again (no luck).
  • Remove the power cord from the computer and hold the power button for 15 seconds before reconnecting and powered it back up (no luck).
  • Connect my turn to another monitor via HDMI (no signal found error also on this one).
  • With the help of my usual PC monitor for other things (my xbox entry was detected immediately on the monitor via HDMI).
  • By using all the methods of display output 3 available with my usual monitor (DVI, HDMI, DP), none of them worked and all would result in no error signal on the screen.
  • Withdrawal/meeting the cables of the screen.  This does not give rise to my monitor to turn on as if is acknowledged the connection has been established to an output device, but once the display lights I get the usual error message ("this is the case with two DVI and DP connections, HDMI does not give me a lot of joy, but maybe it's because she's going through a ' 1 autodetect in 3 out" HDMI splitter.)  The separator acknowledges, that the HDMI is connected, but I get the normal red light that appears when a Powered HDMI is bound upward).

  What I did:

  • Touched the BIOS.
  • Damaged the machine.
  • Disassembled the machine somehow.

  I'm full of ideas on what else to try.  I had the PC for more than a year and has a problem similar to that in the first months of her own, I think it's something to do with the power supply cable (a friend looked for me), but he managed to make it work back again.  Unfortunately I am no longer able to contact my friend on this problem, so I am completely in the dark.  Help would be very appreciated (please avoid some specialized terms as I am a little one recruit across a company PC fixing).

  Thanks in advance.

  Hello

  Thank you for your response.  Fortunately, I can offer you a solution to my own question!  In my view, a windows update 10 can occur during the last stopped that I made.  The update I think doing something to the BIOS that was the issue.

  I did the following steps and managed to get the display to start working again:

  1. Turn on the computer and press the F10 key for eight seconds.

• How to connect 2 LED cinema displays to MBP?

  Running a MBP 13 "2012. Found a lot of things on the movie screen 2 x 24 ". Now, try to understand how to work together.

  I'm not sure about tech miniDisplay, but curious to know if it can work similar to HDMI. The reason being, there are many (affordable) miniDisplay to 2 HDMI splitters, like this

  nail http://belkinbusiness.com/Products/f2cd059-Mini-DisplayPort-2x-HDMI-f-Splitter-d

  The only thing I found to miniDisplay for 2 miniDisplay exceeds $100 (for a monoprice product).

  Getting = Str K % 3AMEBIDX % 3AIT & http://www.eBay.com/ITM/371542962942?_trksid=p2055119.m1438.l2649

  Do you think that using a minidisplay hdmi adapter on both screens, attach those to a hdmi splitter and which hang up to the MPB could split the signal correctly? Can not explain well, maybe this will help chart

  LED LED ACD ACD

  miniDisplay miniDisplay

  HDMI (M) HDMI (M)

  |                     |

  HDMI (F) HDMI (F)

  Belkin splitter

  miniDisplay (F)

  |

  miniDisplay on MPB

  You want two 24 "screens showing the same image?  That's what most of the dispatchers.  MonoPrice says that Belkin does ' t say it than their dispatcher don't.

  If you want different pictures on the poster you will need a Matrox unit:

  http://www.Matrox.com/graphics/en/products/GXM/dh2go/Digital_Me/

  Simple Mini DisplayPort / HDMI adapters are used to connect HDMI displays to Mini DisplayPort.  They will not work in reverse.

  To connect a display, Mini DisplayPort to HDMI (or DVI with a DVI to HDMI cable) you need a converter, such as:

  http://www.KANEX.com/xD

• Send a speech to two Apple TV

  I have a simple question. I have an auditorium with two large television screens. The two TVs have an apple tv 3 generation. I would like to release a two TV keynote presentation. Do I need two iPad for example, or is it possible a device?

  Thanks for your help

  AirPlay does not support several stream if you need 2 iPads.

  Think you buy a HDMI splitter and connect the two screens the same ATV and flow to that so that they remain synchronized.