HDMI + VGA issue / / HP DV7-4000 series.

Similar Questions

• Maximum RAM for notebook DV7-4000 series?

  I have a laptop ' HP Pavilion dv7-4000 Select Edition Entertainment Notebook PC ' 4 years ago (2010), model WA357AV.  Win 7 Home Premium 64-bit with Intel core i5 M450 @ 2.4 GHz and 6 GB of Ram.

  What is the maximum size of RAM so I wanted to update?  I can go up to 16 GB with 2 8 GB cards? It is important that the current memory cards are "unbalanced" because I have a 4 GB card and a 2GB card when I always read both should be the same for the 'best performance '.  If "unbalanced" is OK, I might consider replacing just the 2 GB card with 8 GB, send me some 8 + 4 = 12 GB which would be obviously cheaper.

  Thanks in advance for any advice.

  Hello:

  Max ram with the processor of your model is 8 GB (2 x 4 GB).

  It's well run 4 GB + 2 GB but the memory does not work in DDR mode achieve higher.

  Replace the 2 GB chip with a 4 GB chip.

  That's the best you can do.

• dv7-4000 series: Bios

  I bought this HP pavilion laptop DV7-4000 on eBay and was not provided with its BIOS password so I can't use it because I do not know the BIOS/CMOS password previously used by the seller. Can someone help me torecover the passwor please? Help!

  System to disable the CODE 59277444

  Hello

  Try: 46155480

  Concerning

  Visruth

• Dv7-4000 series eSATA Question

  Hello friends,

  I have a HP DV7 - 4287cl (Plug here) and you have a question about the eSATA/USB port.  I was unable to find the answers to these questions on my own so I hope that someone here could enlighten us on this issue.

  (a) what is the speed of the eSATA connection? (ie. 1.5, 3, 6 GB/s?)

  (b) I understand there is a difference between e-SATA and e-SATAP - is this port "electric"?

  (c) recommendations on you readers / anyone have used?

  Thank you, in advance.

  Oso_Grande wrote:

  Hello friends,

  I have a HP DV7 - 4287cl (Plug here) and you have a question about the eSATA/USB port.  I was unable to find the answers to these questions on my own so I hope that someone here could enlighten us on this issue.

  (a) what is the speed of the eSATA connection? (ie. 1.5, 3, 6 GB/s?) Maximum of 3.0 Gbps

   

  (b) I understand there is a difference between e-SATA and e-SATAP - is this port "electric"? It is powered and can power a device such as an SSD or 2.5 "HARD disk

  (c) recommendations on you readers / anyone have used? Is not this issue a bit out of left field? 

  Thank you, in advance.

  Best regards
  ERICO

• Pavilion dv7-4000 1 replacement of hard drives with more

  I have a dv7-4000 series double portable hard drive running windows 7 64 bit. One of the drives died and I am looking to buy a replacement and want to upgrade, but I'm not sure if I have 2 hard disks of different sizes.

  (1) can I replace factory bad HARD drive with a larger 320? (I'd then 1 factory 320 GB drive and 1 car again, more)

  (2) is the brand of the material of hard drive (Toshiba courses)?

  (3) are there any specific specs I should look for or avoid (ie. rpm, Gbps, etc.)?

  Hi wweksjk! : Yes, you can have 2 HD with different capacities for example on my PC of Xion MSI, which was built in 2006, I had 2 HD Western Digital, respectively 160 GB & 250 GB divided into 3 partitions

  the brand name is not as important as the number of turns faster the car turns your computer will be faster

  also look at the size of the buffer on the disk as well because the more it will speed up the boot time as well

  However install a new drive as boot drive will be complex, but if you follow the instructions that come with the HD installer it is possible

  for example, a 7200 RPM drive is faster than a 5400 RPM, but not as fast as a model k 10 or 15 k

  Good luck

  hope this helps to & help

  Happy holidays!

  spacechild

• Satellite Mini click - need a HDMI VGA adapter

  HI -.

  I have a satellite mini-click and a PC with VGA screen only.
  Can you give me a link to an adapter on Amazon.co.uk that will certainly work? and the required specifications?

  I'll be able to use the audio output from the HMDI (so that I can use headphones and microphone of different helmets?)

  Raytaylor

  You need a Hdmi--> Vga and not vice versa. I don't know where you live but try electronics stores, but you will also find some stores such as compusa worten mediamarkt (EU)

• Belkin HDMI - VGA with 4th Gen card

  My Belkin HDMI - VGA adapter works with my Apple TV 2nd and 3rd gen, but doesn't seem to work with my new Apple TV 4. Have any other it works? Maybe I have a faulty adapter or Apple TV. Apple TV 4th gen works with my TV using HDMI.

  Thank you.

  good vga is not compatible fullHD 1080 p so to run the appletv will have to be lowered to 720 p also vga does not support hdcp https://en.wikipedia.org/wiki/High-bandwidth_Digital_Content_Protection

  so as the media who relied on hdcp for drm would not work with vga

• HP n003Tx: adapter HDMI / VGA to extend the display on the screen.

  I use HP-n003tx laptop computer because it is not a VGA port and I would like to thank its desktop display to another monitor, also will use laptop to display on projector (duplicating) Office.

  Can you please help me if I use HDMI - VGA adapter for this purpose, or I need to buy the adapter USB - VGA?

  Thank you

  Hi @Sheenam3,

  Welcome to the HP support community!

  You have come to the right place to ask questions, find solutions and get help from others in the community! I see that you are interested to HDMI to VGA to your HP Pavilion Notebook 15-n003tx. Yes, you can buy a VGA HDMI connector.

  Hit thumbs upward to give me a five Kudos top, just to say thanks for trying.

  Thank you.

• LaserJet 4000 TN: The printer HP Laserjet 4000 Series PCL5: error state & quot; message & quot;

  I sent the following message to Microsoft after a ' update:

  I have a printer HP Laserjet 4000 Series PCL5 TN which worked beautifully "black only" for many years. A recent update (Windows 10:12 / 22/15) seemed to put the printer in the "printer error state", when you try to print a simple document. It has been my default printer for a long time. I followed the suggestions of printer "windows 10", that is, unplug and plug - check cable (not USB) connections, remove the printer from the list of print devices /, reinstall drivers HP for Windows 10 (following suggestions from HP on HP site) - nothing seems to work. It has a network cable connection, but it is directly connected to my computer, no other computers are connected. See screen capture below. I even did a "recovery" of before 12/22! Any suggestions? Thank you. GM

  I received instructions from Microsoft:

  You run the printer Troubleshooter and identify the cause?

  If this isn't the case, we will do that by visiting the link below and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows-10/fix-printer-problems

  Check also the update (KB number) has recently been installed on your computer.

  You can also restore printer drivers and check.

  To restore the driver, you can follow the steps below:

  • Press Windows + R on the desktop screen.
  • Type devmgmt.msc and press ENTER.
  • Expand the printer drivers and do a right-click on the driver and select Properties.
  • Go to the driver tab and click driver RollBack.

  Can I assume that you use a parallel cable to connect the printer to the computer.  If you do this is a known problem that can be solved.  Go to Device Manager and then click ports.  Double-click the lpt for the printer port, and then click on device settings at the top.  Change the default setting of the middle box checked in the box below to use any available interruption. I would also check the legacy down.  If necessary, turn the computer off and then turn it back on, but most of the time this solves the problem without a reboot.

• HP dm1 4000 series keyboards

  Hi, I bought the HP dm1-4310nr U.S. netbook and are having a problem.

  As you know WE use different keyboard configuration that we have here in Europe.

  I was hoping to replace my pc keyboard by purchasing the Northern version of ebay.

  Only flaw is that it is not any version of this keyboard model says in the market if.

  Some other 4000-series keyboard is compatible with it?

  Hello

  There are many keyboards for dm1 machines, they are the same SIZE with yours, but as mentioned on my first answer: you have bought a very special, not available on other markets so same size but may not work. For the keyboard from another supplier, sorry I don't know.

  Good luck.

• How to install drivers for "Dell adapter - USB 3.0-HDMI/VGA/Ethernet/USB 2.0"?

  I bought the Dell XPS 13, and I need an adapter to connect to Ethernet:

  Dell adapter - USB 2.0 3.0-HDMI/VGA/Ethernet/USB. -

  How to install this driver? -Will I install it on my "gold statue?

  I cannot join the domain because Windows Setup cannot find the required driver.

  Tried to install the driver as the latest installation command before the restart, but without success.

  No one knows how to fix?

  Hi Wooltown,

  ImageAssist does not support devices that are not included in the system.  If you want to integrate support for the driver, you can follow the instructions mentioned in the following post.

  http://en.community.Dell.com/TechCenter/enterprise-client/f/4916/t/19603435

  Thank you

  Tyler

• Problems with Dell USB - C (DA200) to the HDMI, VGA, RJ45, USB3 adapter

  Hi all

  I guess I'm a little desperate at 01:45 haha...

  I just got my XPS 13 9350 and it's great. I bought the USB - C DA200 adpater USB3, RJ45, VGA, HDMI. Unfortunately, I have some difficulty with the device. They are listed below:

  (1) plug, computer does not recognize the device. If I right click and uninstall in Device Manager and do a scan 'new material', it works again - but not for long.

  (2) the device and the Realtek gigabit portion to connect and reconnect every second in Device Manager and it's annoying.

  (3) disabling the wireless card/connection really seems to help the unit to connect and it works 100%. ONLY when the wireless adapter is disconnected.

  Basically, windows is to have a real time hard keep this adapter plugged... almost as if he can't recognize it. I tried to install the drivers for the card - nothing. I've updated all the firmware from Dell crush (including the chipset) and the BIOS... nothing. Same thing. If you do a search on google, there are a few discussions on this problem. There is a nice size on Reddit.

  Someone has an idea, what happens? It's a real shame that a beautifully designed and expensive adapter does not work with a Dell computer.

  Thank you, AJ

  In another thread ("XPS 13 9350 - SSD USB C 3.1 - very unstable/not usable '-I can not add links), the following fixed my XPS 13 9550 problem using a drive HARD USB 3.0 with the Dell USB - C for HDMI/VGA/Ethernet/USB3.1 adapter:

  ... the adapter USB - C and WiFi are kind of material and power wise. If you go to the options of the advance of the WiFi adapter and change the WiFi output at 75%, this solves a lot of problems with the connection / disconnection of USB - C questions. Exit at 75% reduction does not affect your connection on wireless networks.

  My HARD drive kept connect/disconnect when you use the adapter, but this correction took care of her.

• HP Pavilion DV4-2140us. Looking for Windows XP (32-bit) driver for Mobility Radeon HD 4000 series.

  I have a laptop HP Pavilion DV4-2140US AMD Turion II M520.  I'm looking for a Windows XP (32-bit) driver for Mobility Radeon HD 4000 series video card. I've upgraded HDD to a 1 TB hard drive and the partition for Windows XP (32 bit) power to a dual-boot between Windows 7 (64 bit) and Windows XP (32 bit).

  Hello:

  Please see if it works.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-85978-1&prodTypeId=12454&prodSeriesId=472276

  Paul

• New HP Pavilion DM1 4000 series max memory card

  Hello

  I am looking to buy a new ultraportable laptop and like the look of the new series DM1-4000. However, it seems that there are two versions available in the United Kingdom - the 4004SA DM1 and DM1-4027SA. The data sheet pdf, the noticeable difference only seems to be the maximum amount of memory installed (4 GB in the 4004, 6 GB in the 4027). I don't understand not why HP would impose this limit as both have 2 user accessible so-DIMM slots - my preference would be to upgrade the memory 8 GB by replacing both of the 2 GB so - DIMMS with 4 GB (after installing W7 64-bit rather than the stock windows W7 32 bit, it comes with).

  My question is this - is correct these limits of 4 GB or 6 GB or is it just a marketing thing?

  Interesting, the Maintenance and Service Guide (PDF) DM1-4000 series indicates the memory installable max is 8 GB.

  Thanks in advance. Any ideas much appreciated.

  Edit: Also noted there is a model 4020SA and 4020EA... both specify also 4 GB memory Max.

  There is not much sense, it?

  The maintenance manual makes it clear that portable computers running AMD processor have 2 slots of memory each hold 4 GB of memory.  See Chapter 1, page 2.

  Now, the Intel PC base seems to indicate that they cannot contain only 4 GB maximum memory - affordable housing from a single client.

  http://h10032.www1.HP.com/CTG/manual/c03084091.PDF

  Paul

• Can I use both HDMI & VGA ports on a VAIO laptop?

  HDMI & VGA ports are very close together on the VAIO Laptops.  This design is deliberate to prevent users from using two HDMI & VGA ports simultaneously. I'm trying to connect 2 external monitors to my VAIO.

  Apparently, this is not a unique situation. I found dozens of conversations forum describing this problem. For example:

  "Somebody found a narrow VGA connector? I have the same situation with one Sony laptop with a VGA and HDMI connector, just computer next to each other. I want to connect 2 monitors, but since they are so close, it's one or the other. The graphics card supports two monitors, so don't know why Sony would make it impossible to connect the 2 at the same time. "Posted by LDGrant on Windows Secrets Lounge web site.

  Hi odbad1,

  Unless you have a desktop Sony (not all in one), then Yes you can replace the video card.  But if you have Sony laptop, you CANNOT swap out.  Sony laptops have an integrated video card / onboard.  To change the video card is to replace the motherboard (and no, can not exchange for an another one-motherboard motherboard are constructed for this particular unit and plug).

  Nick-