HDX 9010nr - hybrid HDTV does not not in Win7

Similar Questions

• HP HDX Premium series: keyboard does not work

  My keyboard does not work after upgrade to Windows 10. I have to press the button for 3-5 seconds to make it work. Looking for a solution. Thank you.

  Hello

  Check the following points.

  Open windows control panel and on the top right, next to the display by: select "large icons".  In the new page layout, select the "ease of access Center.

  Select the option "make the keyboard easier to use".

  If there is a check mark next to 'Turn on filter keys' or "Activate sticky keys", click on the box to Remove , then click on apply and then Ok to save this change.

  Kind regards

  DP - K

• Pavilion HDX 16: Windows 7 does not start after the upgrade to Windows 10

  Hello

  I have a system to dual-boot with windows 7 and ubuntu (with Windows 7 and NeoGrub Bootloader Windows Boot Manager).

  Recently, I upgraded from windows 7 to windows 10 via free upgrade offered by SM. However, I didn't like windows 10 and tried to upgrade to windows 7 by the following settings-> update of the security & -> Recovery-> Go Back to Windows 7.

  After the long process of decommissioning, cannot start windows 7 and the "Startup Repair" tool began to run. However, he could not solve the problem. Other recovery options 'system restore' and 'image system recovery' is not such that it could not find any restore point or the image created previously (I'm sure it were created before upgrade restore points).

  So, although I can boot ubuntu without any problem, I can't start windows 7. After the "starting windows" screen, I get the blue screen (a problem has been detected and windows has been shut down...).

  I intend to use the DVD to install windows 7 for repair, but

  (1) I don't know if I can boot from the CD because it is a dual-boot configuration

  (2) I'm afraid of losing work ubuntu OS.

  I appreciate if someone can help me find my Windows 7. I thank very you much for your time.

  Sorry, but there are a lot of reports on forums of Win10 the option of GoBack does not always work correctly.

  You should be able to boot properly from the same DVD of Win7 if you dual-boot with Ubuntu, but be aware, if the startup repair works (you may need to run three times), it will replace the link to start Linux in the MBR and after that, the machine starts immediately to Win7.  You will need to reinstall GRUB to get Ubuntu boot back.  You may be able to fix the boot of Ubuntu using repair boot: Boot-Repair - Community Ubuntu Documentation

• Flash of Citrix HDX redirection plugin installer does not

  Hello

  We tried to install the plugin to redirect Citrix Flash (products - XenDesktop - download Flash Plugin - Citrix), but it does not work.

  When the Installer starts after download, it starts to recover windows installation and then empties (below)

  

  I ran a debug install as a previous thread suggested and stuck the comments below. We tried it in many machines, operating systems on different networks, all with the same result.   (the path of the file has been modified by me, below)

  Initialized memory (Maximum)

  ===============================================================================

  Version of the host: 3.5.4.26

  "C:\xxxxx\xxxxxxxxxxxxx\Desktop\install_flashplayer15x32_mssd_aaa_aih.exe" / debug - high

  System: Windows NT version 6.2.9200.0

  Added url to the white list (localhost).

  Added url to the white list (solidstatenetworks.com).

  Added url to the white list (snxd.com).

  Registry path only reading we add whitelist (machine\Software\Microsoft\Internet Explorer\).

  Common name added to the white list (State solid networks I, LLC).

  Common name added to the white list (Adobe Systems Incorporated).

  Extraction skin file (/ app.config.xml)

  Added url to the white list (get.adobe.com).

  Added url to the white list (get2.adobe.com).

  Added url to the white list (aihdownload.adobe.com).

  Added url to the white list (airdownload.adobe.com).

  Added url to the white list (ardownload.adobe.com).

  Added url to the white list (download.macromedia.com).

  Added url to the white list (fpdownload.macromedia.com).

  Added url to the white list (fpdownload2.macromedia.com).

  Added url to the white list (fpdownload.adobe.com).

  Added url to the white list (fpdownload2.adobe.com).

  Added url to the white list (platformdl.adobe.com).

  Adding url to the white list (platformdl - stage.corp.adobe.com).

  Added url to the white list (wwwimages.adobe.com).

  Added url to the white list (wwwimages.stage.adobe.com).

  Added url to the white list (dlmping.adobe.com).

  Added url to the white list (dlmping2.adobe.com).

  Added url to the white list (dlmping3.adobe.com).

  Added url to the white list (dlmping4.adobe.com).

  Added url to the white list (get3.adobe.com).

  Added url to the white list (get3.stage.adobe.com).

  Added url to the white list (adobetag.com).

  Added url to the white list (promotion.adobe.com).

  Registry path only reading we add whitelist (machine\SYSTEM\CurrentControlSet\Control\Session Manager\Environment\).

  Registry path only reading we add whitelist (machine NT\CurrentVersion\).

  Registry path only reading we add whitelist (machine\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\).

  Registry path only reading we add whitelist (machine\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\).

  Registry path only reading we add whitelist (user\SOFTWARE\Microsoft\Windows\Shell\Associations\UrlAssociations\).

  Registry path only reading we add whitelist (root\http\shell\open\command\).

  Registry path only reading we add whitelist (root\https\shell\open\command\).

  Registry path only reading we add whitelist (root\.htm\).

  Registry path only reading we add whitelist (root\.html\).

  Way of reading only registry has added to the white list (root\IE. HTTP\shell\open\command\).

  Registry path only reading we add whitelist (root\FirefoxURL\shell\open\command\).

  Registry path only reading we add whitelist (root\SafariURL\shell\open\command\).

  Registry path only reading we add whitelist (root\ChromeHTML\shell\open\command\).

  Registry path only reading we add whitelist (machine\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\).

  Registry path only reading we add whitelist (machine\SOFTWARE\Macromedia\).

  Registry path only reading we add whitelist (user\SOFTWARE\Macromedia\).

  Registry path additional read-write to the whitelist (machine\SOFTWARE\Adobe\Setup\Reader\).

  Registry path additional read-write to the whitelist (machine\SOFTWARE\Wow6432Node\Adobe\Setup\Reader\).

  Common name added to the white list (Adobe Systems, Incorporated).

  189 active MIME types

  Webserver running thread

  Web server listening on 127.0.0.1:63006

  Browser cache empty (0 removed) (851-verified) (0.01 seconds)

  Browser: IE 9.11.9600.17498

  Extract the skin file (mainwindow.config.xml)

  Set of response codes [/ mainwindow.html:200:0]

  Accept the size of the queue (2)

  Set of response codes [/images/icon-blank.gif:200:0]

  Set of response codes [/ mainwindow.css:200:0]

  Accept the size of the queue (2)

  Set of response codes [/ compact.min.js:200:0]

  Set of response codes [/images/icon-complete.gif:200:0]

  Set of response codes [/images/icon-complete-error.gif:200:0]

  Accept the size of the queue (2)

  Set of response codes [/images/logo-adobe.gif:200:0]

  Set of response codes [/images/bg-close-program.png:200:0]

  Accept the size of the queue (2)

  Set of response codes [/images/bg-download-bar-empty.png:200:0]

  Set of response codes [/images/bg-header-error.gif:200:0]

  Set of response codes [/images/bg-download-bar-full.png:200:0]

  Discover the default browser...

  Default browser: "C:\Program Files (x86)\Google\Chrome\Application\chrome.exe'-'%1 '.

  Version of the skin: 2.0.2.13

  Ready document triggered

  Extract the skin file (local/en - us.json)

  Extract the skin file (workflow.json)

  Impossible to extract the skin file (local / en.json)

  Impossible to extract the skin file (local / ie.json)

  Accept the size of the queue (2)

  Set of response codes [/images/button-left.png:200:0]

  Set of response codes [/images/button-center.png:200:0]

  Set of response codes [/images/button-right.png:200:0]

  Extract the skin file (interop/downloader.dll)

  Loading interop library (C:\Users\Ed_LO\AppData\Local\Adobe\AIH.e8ca43f5ad5cdca8a0c1d77b352fe6e414532d67\download er.dll) (3.5.4.26)

  Initialized memory (Maximum)

  ===============================================================================

  Downloader Version: 3.5.4.26

  Solid Core 0.82 () in use (S11)

  CWD [C:\xxxxxx\xxxxxxx\Desktop\] [EC:F4:BB:09:82:BA]

  Agent of Torrent: - SC0082 -.

  Agent of Torrent: - SD354Q -.

  From the guiding

  Manager changing state (Idle) (early)

  Manager state changing (departure) to (process)

  Set of response codes [/ environment.json:200:224]

  macro environment (macro) (1305): addition of macro WorkflowUrl = https://get.Adobe.com/flashplayer/WebServices/AIH/

  macroenvironment (macro) (1305): addition of macro InstallType = install

  macroenvironment (macro) (1305): addition of macro InstallName = flashplayer15

  macroenvironment (macro) (1305): addition of macro InstallSite live =

  macro environment (macro) (1305): addition of macro CompletionPageUrl = https://get.Adobe.com/flashplayer/completion/AIH/

  mergeWorkflow (fusion) (5EAA): recovery of https://get.Adobe.com/flashplayer/WebServices/aih/?language=en-IE & currentFilename = install _ flashplayer15x32_mssd_aaa_aih.exe & builtinName = flashplayer15 & type = install & site = direct

  installProducts (products) (5781): primary product

  installProducts (products) (5781): preparation of sitecatalyst ping

  installProducts (products) (5781): primary product

  Could not open file [(C:\Users\Ed_LO\Desktop\install_flashplayer15x32_mssd_aaa_aih.exe][00008000](2: 00000002)]

  installProducts (products) (5781): sitecatalyst Quantity 0

  installProducts (products) (5781): sitecatalyst siteCatalystOffers 0

  installProducts (products) (5781): sitecatalyst siteCatalystAcceptedOffers 0

  installProducts (products) (5781): sitecatalyst primaryProductExitCode-1

  installProducts (products) (5781): sitecatalyst false primaryProductIsComplete

  installProducts (products) (5781): primaryProductSiteCatalystCode of sitecatalyst

  installProducts (products) (5781): pageName ACDC_FP_AIH_Launched sitecatalyst

  installProducts (products) (5781): sitecatalyst ACDC_FlashPlayer channel

  installProducts (products) (5781): sitecatalyst prop1 IAH

  installProducts (products) (5781): sitecatalyst prop2 ACDC downloads

  installProducts (products) (5781): sitecatalyst prop3 get.adobe.com

  installProducts (products) (5781): sitecatalyst prop4 en

  installProducts (products) (5781): sitecatalyst en prop5: undefined

  installProducts (products) (5781): products of sitecatalyst; FlashPlayer_AIH

  installProducts (products) (5781): sitecatalyst eVar73 ACDC_FlashPlayer

  installProducts (products) (5781): eVar74 of sitecatalyst

  installProducts (products) (5781): sitecatalyst events event96

  installProducts (products) (5781): completion page url https://get.Adobe.com/flashplayer/completion/AIH/

  installProducts (products) (5781): preparation of sitecatalyst ping

  installProducts (products) (5781): primary product

  Could not open file [(C:\Users\Ed_LO\Desktop\install_flashplayer15x32_mssd_aaa_aih.exe][00008000](2: 00000002)]

  installProducts (products) (5781): sitecatalyst offers results (false isDual oLen. 0):

  installProducts (products) (5781): sitecatalyst installedCode failedCode offerCode

  installProducts (products) (5781): sitecatalyst allInstalled true allFailed true

  installProducts (products) (5781): sitecatalyst numInstalled 0 numFailed 0

  installProducts (products) (5781): sitecatalyst Quantity 0

  installProducts (products) (5781): sitecatalyst Quantity 0

  installProducts (products) (5781): sitecatalyst siteCatalystOffers 0

  installProducts (products) (5781): sitecatalyst siteCatalystAcceptedOffers 0

  installProducts (products) (5781): sitecatalyst primaryProductExitCode-1

  installProducts (products) (5781): sitecatalyst false primaryProductIsComplete

  installProducts (products) (5781): primaryProductSiteCatalystCode of sitecatalyst

  installProducts (products) (5781): sitecatalyst pageName = ACDC_FP_AIH_Unknown_Reason_exitcode-1

  installProducts (products) (5781): sitecatalyst ACDC_FlashPlayer channel

  installProducts (products) (5781): sitecatalyst prop1 IAH

  installProducts (products) (5781): sitecatalyst prop2 ACDC downloads

  installProducts (products) (5781): sitecatalyst prop3 get.adobe.com

  installProducts (products) (5781): sitecatalyst prop4 en

  installProducts (products) (5781): sitecatalyst en prop5: acdc_fp_aih_launched

  installProducts (products) (5781): products of sitecatalyst; FlashPlayer_AIH

  installProducts (products) (5781): sitecatalyst eVar73 ACDC_FlashPlayer

  installProducts (products) (5781): eVar74 of sitecatalyst

  installProducts (products) (5781): events of sitecatalyst

  undefined actions (products) (installProducts)

  Caught unhandled exception notification Center: unable to get the 'length' of undefined reference property or null

  the completion page URL https://get.Adobe.com/flashplayer/completion/AIH/?ExitCode=-1

  Launch the browser...

  Command: "C:\Program Files (x86)\Google\Chrome\Application\chrome.exe '-'%1 '.

  Executable: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe

  " Arguments:-' https://get.Adobe.com/flashplayer/completion/AIH/?ExitCode=-1 "" "

  Manager state changing (process) (stop)

  Manager changing state of (Stop) (stop)

  Manager changing state of (off) (stop)

  Active storage (0/10):

  -Unused Member

  -Unused Member

  -Unused Member

  -Unused Member

  -Unused Member

  -Unused Member

  -Unused Member

  -Unused Member

  -Unused Member

  -Unused Member

  Manager changing (stop) State (idle)

  Thread closed Manager successful

  Maximum memory used (230 / 661 k)

  ===============================================================================

  Web server thread stop successful

  Browser cache empty (0 removed) (866-verified) (0.00 seconds)

  Maximum memory used (1137 / 5413 k)

  ===============================================================================

  Hi Jack,

  The Citrix link has on their page for the installer of Flash Player is incorrect.  It was refitted and Citrix is contacted about this.

  To download the Citrix Plugin uses, go to http://get.adobe.com/flashplayer/otherversions, select your version of Windows OS, then "PS 16 for Firefox - NPAPI.

  --

  Maria

• cRIO - Scan engine's hybrid mode does not

  Hello

  I have a cRIO project in which almost all my modules must operate in mode of scanning (high density, low sampling etc. requirements), however I 9870 module that requires the FPGA interface, so I will try to get cRIO to work in hybrid mode. I followed the instructions in the article on this subject without success. At the present time, everything works perfectly if I leave the chassis in the interface in scan mode, but when I go to the FPGA interface (deploy the change, compile my FPGA vi, download the bitfile and restart the RT vi) none of my data values are updated, and it's not just that they are stable, the timestamps on them are all zeros. The RT is Scan Engine State VI says the scan engine is in Active mode, but still it behaves as if it is not. Any suggestions?

  Thanks for the help,

  Jon

  Hello Jon,

  Can you explain your configuration a little more in detail?

  When you say download the bitfile tell you download the bitfile blinking to run at startup?  The FPGA VI is set to run at startup?

  Your code RT has an 'open FPGA VI reference' calling in?  If not, can you try that one?

  You are able to communicate with the 9870 in hybrid mode?

  Thank you

  Sebastian

• Store Art 1.5 TB does not recognise Win7

  I have this Art store 1.5 TB 3.5 "black disc external HARD and he worked well with Windows XP. Now I have spent in Win7 and can't get the drive working. If I connect it to the computer, I can hear it start to turn, then he made the 'click' sound and guard spining. Else nothing happens, I do not see in the management of post work or drive.

  Any help appreciated.
  Other external staff hard drives work well, if there are 2.5 "or 3.5". This toshiba, with that I have a problem also works with another laptop with Windows XP.

  The driver of the usb controller is responsible for this function that is part of the chipset drivers. So, try to update the drivers for the chipset of your computer.

• Does not update Win7

  Recently installed a new SSD and Win7 Pro 64-bit (sp1) on my Dell 1554.   The installation went perfectly like the activation process.  After installing a few drivers (graphics, chipset, audio etc..) I went to the update process.  Windows Update runs but can't find any update.  I ran all the automatic update at night and also ran, but still no update.

  I looked for the community and other resources, try some fix - its and solutions without success.  I've done several facilities and never encountered this problem, but research on the web, it is obvious that I am not alone.  Can someone please?

  The only solution for this is unfortunately on the wire of this man (at least for now):

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

• BITS does not start Win7 64 (PA bear MS MVP)

  PA bear MS MVP:

  Computer Toshiba laptop came with Win 7 Home 64 bit (currently version 6.1.7601) installed.

  Free trial of Norton has been installed by regulation. I uninstalled Norton and used AVG free until earlier this year when I bought McAfee Total Protection (ver. 14.0.4113), which I use now and McAfee WebAdvisor (ver. 4.0.167) I have MalwareBytes, Version 2.1.6.1022, but only use it manually. No AdAware & SpyBot S & E. 15/08/2015, I bought speed difficulty Pro of FixBliss (version 2.9.8) tool that cleans my registry, among other things such as, I suspect, causes close the problem I ask because the installation date and issue dates are real.

  I received the offer of Win10 and signed and waited. Time has come to do the Win10 update and it failed. Then I noticed that the last successful update was held on 12/08/2015 and it was MS Silverlight version 5.1.40728.0. All others since had failed. I started Googling for answers and BITS found has not started and Windows could not start the BITS of the Local computer and that I should look in the system event log. I also found that 'Terminal Services' was not at all.

  I tried 2 different files MS support Fixit troubleshooting commands, but to no avail. Then I did the great thing to restore my system all the way back to 12/08/2015 and, of course, when the computer reboots, I got the Windows cannot start message - always a wonderful feeling when you get one. Well, I got up and running but still not start BITS so also cannot run earlier updates since 8/15 and, the big one, cannot be upgraded to Windows 10. I tried to include a lot of info that you seem to ask, what makes the question too long - sorry about that. Any ideas?

  Hello

   

  Please contact Microsoft Community.

  I appreciate the efforts you have done to solve this problem. Please confirm some additional information to help you better:

  What are the number of KB updates failed?

  What is the exact error message associated with the updates failed?
  Meanwhile, I suggest you perform the above step and see if it helps.
   
   
  You will need to re of the registry files which you linked with the Background Intelligent Transfer Service, and then check if it works.
   
  (a) click Start, click Run, type regsvr32 qmgr.dll in the Open box, and then click OK.
  (b) click OK.
  (c) click Start, click Run, type regsvr32 qmgrprxy.dll in the Open box, and then click OK.
  (d) click OK.
   
   
  You receive an error message when you try to download the updates on the Windows Update Web site or the Microsoft Update Web site, or when you try to start the Background Intelligent Transfer Service
   

  http://support.Microsoft.com/kb/916251

  I hope this helps. Do not hesitate to contact again us for any further assistance.

  Kind regards

  Anusha

• Virtual pc does not work: Win7 "WGA validation tool is no longer supported... etc.".

  Hi, I am trying to install MS Virtual PC on my laptop Windows 7 (Professional Ed). I met at the start of the problems trying to download the VPC file on the MS site as asked me to run Windows Genuine Advantage validation routines and after downloading the exe file, I got the following error message: "this version of the Windows Genuine Advantage tool is no longer supported. Please download the latest version and make sure that your system clock is accurate.
  I found a way to get the files downloaded and installed, but every time I run them I get the above message.
  Win7 is a newly installed due to a problem of warranty HP version. Installed by HP themselves - registered as active on the details of systems.
  The disproportionate tool gives the following result:
  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: genuine
  Validation code: 0

  Code of Validation caching: 0x0
  Windows product key: *-* - 788W3 - H689G-6P6GT
  The Windows Product Key hash: yr8OHoeXhbT4dc6MxGYjdAStSPY =
  Windows product ID: 00371-OEM-8992671-00008
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {3641567F-7796-45D7-AD98-3BF15F32815C} (3)
  Admin: Yes
  TestCab: 0x0
  WGA version: registered, 1.9.42.0
  Signed by: Microsoft
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130801 - 1533
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Professional Edition 2003-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: http = 127.0.0.1:49172; HTTPS = 127.0.0.1:49172
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {3641567F-7796-45D7-AD98-3BF15F32815C}1.9.0019.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-6P6GT00371-OEM-8992671-000082S-1-5-21-1802051947-1949246654-1187692214Hewlett-PackardHP EliteBook 8540wHewlett-PackardF.23 worm 68CVD20130308000000.000000 + 000822A3507018400FC08090409GMT Standard Time(GMT+00:00)03HPQOEMSLIC-MPC100100Microsoft Office Professional Edition 20031186D917FC1F81500cPHlnVJpXknsDw1NmgUILMAsbog = 73931-640-4339835-5797614

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00178-926-700008-02-2057-7600.0000-2692013
  Installation ID: 005811245242997535401272229461562315923921387556330174
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 6P6GT
  License status: licensed
  Remaining Windows rearm count: 2
  Trust time: 10/02/2013 15:06:20

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: PASS
  Event timestamp: 10:2:2013 12:01
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current HWID of Hash: NAAAAAEABAABAAEAAAABAAAAAwABAAEA6GFQD84PRG0i / Jq9 + PDqLySt1AE4Z2o0QLBcXQ ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC HPQOEM 1521
  HPQOEM FACP 1521
  HPQOEM HPET 1521
  MCFG HPQOEM 1521
  TCPA HPQOEM 1521
  SSDT HPQOEM SataAhci
  SSDT HPQOEM SataAhci
  SLIC SLIC-MPC HPQOEM
  SSDT HPQOEM SataAhci
  SSDT HPQOEM SataAhci
  SSDT HPQOEM SataAhci
  SSDT HPQOEM SataAhci
  ASF!            HPQOEM 1521

  I would appreciate your help,

  Thank you

  try internet explore 32 bits.  the tool barfs on firefox and some other browsers.

• Help! Adobe Reader XI ' does not ' in Win7

  Anyone know how to solve my problem.  I'm currently under Adobe Reader XI with Win 7.  It was working fine, but something happened.  I do not think that I have installed new updates, but something must have happened automatically.

  I have uninstalle and not reinstalled - no fix

  I tested with different browsers - no fix

  I've updated the plugin adobe

  I updated adobe flash

  I've updated to adobe air

  I'm at a loss to know what to do - I get email to work with pdf and I can open it, but once this happens Reader gives me a message "not responding."

  Anyone have any ideas?

  Can you open Reader by itself?  If so, try to disable the Protected Mode [Edit |] Preferences | (Improved) security].

• Re: Problem of recovery with Satellite L500D - 16 M: does not load Win7

  I recently put the recovery disk in my Satellite L500D - 16 M laptop to factory settings.
  It restarts without problem until it gets to the windows page 7 and prepare to start first use but it keeps looping back and restart.

  What can I do?

  AFAIK you can't do much.
  Try again and let us know if the same problem occurs again.

• Satellite click A3300 W35DT does not stand Win7 from USB flash memory

  Hello

  I have a problem when I was a USB boot to install os because my drive hard ultra 5mm w5000mpck slimm failed, I can't start.

  I have a USB stick with Windows 7 and the other with windows 8, but nothing happens.
  I see the message on the black screen (insert a propet boot device and press a key) and I stuck in this part.
  I try with external dvd usb with windows 7 and nothing happens!.

  Please help me how can I start to install other os.

  Thank you

  Hello

  I recommend you check the BIOS settings.
  If you want to install another system or want to boot from an external device, you will need to make some changes to the BIOS setting.
  In most cases secure boot must be disabled and you must pass the UEFI MSC mode.

  Your comments would be appreciated.

  By the way: this seems to be a Toshiba laptop series we. In this case I recommend you check out the Toshiba forum we: http://forums.toshiba.com/

• Factory restore does not restore Win7 but Win8

  I just installed Windows 8, but I want to go back to Windows 7. So I chose the factory via the HP tool restore Assistant, which I have done many times before getting a clean install.

  To my surprise it has restored the laptop to a new installation of Win8, but I want to go back to installing Win7? Is this average score the 'restore Win7' has been changed?

  How to get back to Win7 with factory settings?

  I don't burn any media. But I fixed it. I was running to the recovery of Windows, I tried again when starting (F11) and this recovery gave back Win7. So I guess there is a difference there.

  So I'm happy, I got rid of Windows 8 (and 15 males ;-))

• Broadcom netxreme 57xx gigabit controller does not

  I have a d610 and upgraded to w7 pro and my audio does not work and cannot get the driver for the two

  The D610 Dell does not support win7, just winxp & win2k

• Hybrid Analog/DVB-T card does not work - Qosmio F50

  Hybrid Analog/DVB-T card does not (Windows Vista Home Premium).

  Channel zero came after scanning with Media Center. Sent to the hardware engineers.
  Tha card has been tested in a "fresh load of Windows" and worked well.

  It was suggested to clean and reload Windows.
  I made and tested with and without having to download Service Pack 1. Still does not work. Driver has also been updated (2.3.3.21).

  Any suggestions?

  Thank you

  Hello

  First of all, you should test the portable DVB - T with Toshiba s card preinstalled Vista.
  Everything has been set up and should work fine

  I think that it s not Analog/DVB-T Hybrid card problem.

  Maybe the DVB - T signal is too weak and therefore you do not find the TV channels using this card.

  In my country and the region, the DVB - T signal is really weak and I need a DVB - T antenna to receive the signal and the channels!