Headphone plugin does not work usign Vista 64 bit on Satellite P300 - 1 CD

Similar Questions

• Zoo Tycoon 2 does not work on Vista 64 bit Ultimate

  When I start the game it gives an error saying that I have 0 MB of RAM installed.
  I also have a stub GPF.

  I tried to turn on DEP for all programs and added ZT.exe in exceptional cases.
  I edit "MSCONFIG" to show only 2 GB of ram.

  The issue of ram 0 MB goes, but I still I get a stub of protection error when I start the game.

  The thing is my old Zoo Tycoon 1 full collection works very well.
  ZT1 was released around 2001-2002. Whereas ZT2 came out around 2006.
  How can and more old-fashioned work fine but not the new version. I expect it to be the other way around.

  Someone at the helpdesk said MS the ZT2 game does not work on Vista 64 bit and I should install a virtual machine so that it can work in 32-bit.
  Is really the only way? Help, please.

  Hi orbit17,
   
  Thanks for posting on Microsoft Answers.
   
  Try to turn on DEP for "Windows programs and services only" and then restart the computer and check with the game.

  Here is a link to a KB which deals with the minimum requirements of the system and the compatibility problems with Zoo Tycoon 2: http://support.microsoft.com/default.aspx/kb/889368

  Please make sure that your computer meets the requirements for the game and that your computer is compatible

  Also how much RAM do you have installed on the computer?
  Did you add extra RAM since the purchase of the computer?

  You can also try to run the memory diagnostic tool by using the Windows Vista DVD.

  I hope this helps.
  Kind regards

  Niranjan | Microsoft Answers Support Engineer

• Toshiba Tempro does not work with Vista 64 bit Ultimate

  Why Toshiba Tempro don t works with windows vista 64 bit ultimate mey Satellite A300 - 1 l 4?

  Any idea where I can find a solution?

  Thank you very much

  Hello

  I m not very well why it doesn't work on Vista Ultimate, but to my knowledge, there are a few Vista Toshiba Utilities and tool that are not fully supported by Ultimate.

  But why you use Tempro? This tool reports only if a new driver has been transferred on the Toshiba driver page.
  OK, it's interesting to know that a new driver is available, but if your laptop runs without problem I wouldn't update or reinstall anything s!
  There is a proverb which says: never change a running system.

  Welcome them

• Satellite P100 - 400 (PSPA6E): display driver does not work with Vista 64 bit?

  Hello

  I have a P100-400 (PSPA6E) Satellite and I just got the new version of Windows Vista x64bits. I tried this version of Vista because this series of laptops in the 64-bit processors. Well, the problem was when I downloaded the drivers to display on the site and when I'am install the installer says I'm not a Windows vista OS.

  Well actually these drivers only work for Vista x32bits. And I had the same problem with the audio drivers. If Vista was running really slowly and noiselessly, perfect...

  What I am asking, that is, if you realize laptops with 64 bit, why aren't you drivers that work with 64 bit systems...

  Hello

  In fact 64-bit Toshiba drivers are not available at this time on the Toshiba page.
  I think 64-bit drivers are not available because Toshiba doesn't provide any laptops equipped with 64-bit operating system.

  But as far as I know that the new 64-bit drivers should appear both text.
  I'm also looking for these drivers because I m an owner of the 64-bit version of Vista.

  It seems that we have to wait but I m sure that the drivers will be available.

  concerning

• Qosmio G55 - Q804 WIFI driver does not work with Vista 32 bit Ultimate

  I have Vista 32 bit Ultimate and everything is loaded and great job EXCEPT my internal WIFI adapter which is a unit of Intel.
  I would like to know if anyone else has handled this problem on this laptop? Is there something that I am missing?

  Why the driver of the habit?

  I'm an IT admin expert and have run many pieces of hardware in my life so I'm not at a loss to try different tricks and all of them have failed. If anyone can learn an old dog a new trick to get to this loading, I would be more apprciative.

  Thanks in advance

  Coogrrr

  Hello!

  Downloaded the latest driver and the Toshiba BIOS?

  Here you can download:
  http://www.CSD.Toshiba.com-online download-online mobile => Qosmio-G55-Q804 online

  Try with the new driver WLAN and the BIOS and if you have problems, make me know it.

  Good bye

• Re: Satellite P100-194 PSP6AE sound does not work under Vista 32 bit

  Hello world

  I got a nice Satellite P100 and configure Vista for a friend. I don't have the CD that came with the computer, so I installed those on the Toshiba site. I found out later that there is a proposed order of installations, and there is no chipset driver for Vista, so I used the XP one.
  As far as I got, everything works fine but the laptop remains silent. There is no sound from the speakers at all. Windows says it all was going well and there is a level moving in the sound mixer, but he remains silent.

  Does anyone have an idea what I could check or change? I would be very happy!

  Thanks in advance,
  Markus

  From my point of view, there is a hardware malfunction.
  Why? Because the sound through headphones. Therefore, it is not a software/driver problem.

  But what you could do is to check the audio playback device by default:
  Go to control panel of-> sound-> the Read tab
  Here the speakers should be peripheral activated and chosen as a default value.

• Toshiba secured 500 GB does not work with Vista 64 bit

  I bought a Toshiba 500GB (PX1668e-1he0) guaranteed, and I can't install it on my PC with Windows Vista Ultimate 64-bit.
  On the box says it works at least with Vista, but I can't install it.
  When I plug it i and autorun start I have an error message: the digital signature is not valid and it is impossible to install it.

  Now, I've read that this device must be compatible with 64 bit OS
  http://APS2.toshiba-tro.de/KB0/OPT1103320000R01.htm

  What can I do to make it work?
  Why Toshiba still sell this device if it is not compatible with the current operating system?

  Is it possible to update the digital firm pilot?

  PS.

  The security problem is on:
  Audit with the following \XXXXX\BIOLOGIN\securelogin-x64.sys file of Microsoft Windows security

  Hello

  Yes, according to the document, it is possible to use this HARD drive with 64-bit system.
  The software is updated

  As far as I know, you can connect the HARD drive to the PC then right click the CD part of the hard drive you and choose install or program.
  Should work

• Qosmio F30: Toshiba control buttons do not work on Vista 64 bit

  Hello everyone

  I have Windows Vista 64-bit installed on my Qosmio F30, but before operation buttons do not work.
  I tried to use the 32-bit configuration of Vista drivers, but when I press it, I got the following error: "this function not taken in charge.

  So please can someone help me to overcome this problem.

  THX

  Hello

  You cannot use these Toshiba control buttons (play, pause, etc.) because the necessary drivers are not installed.

  You will need a compatible Vista value added package, but it seems that Toshiba page does not provide the 64-bit VAP but only the 32-bit version.
  The problem is that the software for Vista 32 bit does not work on Vista 64 bit OS.

  In my opinion so there's nothing to do right now

• Google Nik Software plugin does not work

  I just installed your Photoshop CS6 (64-bit) upgrades. Now my Google Nik Software plugin does not work. They give the following dialog box message:

  The 'Silver Efex Pro 2' command is not currently available.

  (use any name plug-in is selected to start in double quotes)

  I use a 64 bit Windows Vista computer. I rebooted and still get the same problem. The elements of the software are always in the Photoshop plugins directory and I get Google Nik software windown open when you start Photoshop. This software was working before I did the upgrade.

  What can I do?

  George Thomas

  Hello! Welcome to the forusm!

  Perhaps, what is happening is that you have only the 32-bit version of the plug-ins.

  Check on the Web of NIK site for 64-bit versions.

• Satellite A300D-158 illumination button does not work on Vista

  Buttons light Toshiba does not work under Vista.

  I installed added package versions available in Toshiba support page, but Toshiba Assist do not see the list of function buttons where I can change the feature keys.

  When this value added package is uninstalled all buttons works with WMP, but during the installation - do not.
  Illumination power button is not working do not by the press.

  This means support to toshiba button does not work properly with vista.

  I don't have these problems with XP

  Hello

  As far as I know, you can enable and disable the lighting in the BIOS.
  Go to BIOS and check if you can activate it.

  By the way; you said that buttons don t work with Vista.
  Have you tested this with Vista OS preinstalled Toshiba?

  You should do this!

• My microphone does not work on vista?

  My microphone does not work on vista? WATS the problem

  Hi AhsanShah,

  1. What is the brand and model of your microphone?

  2. what happens when you try to use the microphone?

  3. you receive messages or error codes?

  4. were you able to use the microphone before without any problem?

  5. you will remember to make changes to the computer before this problem?

  6. are you facing problems with other audio devices?

  You can check out the following link and check:

  Connect one microphone, music player or other audio device to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  Hope this information is useful.

• Windows Easy Transfer 7 does not work on Vista

  Try to migrate date files and the configuration of Vista Home Premium (32 bit) to Windows 7 Home Premium (64 bit), Windows 7 laptop says to use a new version of Easy Transfer, tried to install that but it does not work. Starts then just seems to close, without indication of the error.

  Hi boris99,

  You can see the following thread, which presents a similar problem discussed.

  Windows 7 easy transfer does not work on Vista Home Premium 32

• Built an MSI that does not work under Vista but works under XP

  We have built a MSI file that does not work under Vista but works under XP. No errors occur in the installation.  Running the installation "as Administrator".  But the application does not start without errors.

  You'd better choose to post your question in the developer forum. You can try the MSDN forums below, but you should definitely provide more details when you do.

  MSDN forums - http://social.msdn.microsoft.com/Forums/en-US/categories MS - MVP - Elephant Boy computers - don't panic!

• Plugins does not work in After Effects CC15.3

  Everything worked perfectly yesterday. A project of client using some of my favorite plugins like Trapcode Form and particular.

  After update today, would continue my project where I left.

  However, the majority of my plugins disappeared, leaving me unable to progress, short on time.

  I had to completely start over, with a new idea and the standard after effects plugins.

  I tried to reinstall them, but they may not appear.

  Did anyone facing this problem too?

  Can you please help.

  Like HippieBoy, but on Windows 10, I tried to copy the plugins trapcode manually from the

  "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\Plug-ins\Trapcode.

  TO

  "C:\Program Files\Adobe\Adobe after effects CC 2015.3\Support Files\Plug-ins\Trapcode."

  and my trapcode plugins where backward. The amazing thing is that I have installed the Plugin Trapcode after having updated to 2015.3 CC. The reason was probably that the Trapcode plugins trial version installed to AE CC 2015 and that the folder was still here the licensed version of Trapcode installed in the old folder.

  Re: Plugins does not work in After Effects CC15.3

  Hope this will help

• Raw plugin does not work

  I just upgraded with Photoshop CC 2015 and the raw plugin does not work.  I get a blank yellow image when I try to access and edit a raw photo.  What can be done to fix this?

  Photoshop and Camera Raw preferences, uncheck the option to use the graphics processor.